Answers
Answer:
This unbalanced force causes her to change in direction.
If the forces on an object are unbalanced, this is what happens:
a stationary object starts to move in the direction of the resultant force
a moving object changes speed and/or direction in the direction of the resultant force
Related Questions
A net force of 60 N north acts on an object with a mass of 30 kg. Use Newton's second law of
motion to calculate the amount of acceleration the object will experience. Then explain how the
amount of acceleration will change if the net force or the mass of the object increases.
Answers
Answer:
Explanation:
F = ma. For us, this looks like
60 = 30a and
a = 2 m/s/s
If the force goes up to, say, 90, then
90 = 30a and
a = 3...if the force goes up, the acceleration also goes up.
If the mass goes up to say, 60, and the force stays the same, then
60 = 60a and
a = 1...if the mass goes up, the acceleration goes down.
Einstein's theory of general relativity is currently the best explanation of gravity.Why has this theory not been replaced with a new one
Answers
Answer:
Option C, It still explains the experimental evidence pertaining to gravity
Explanation:
Please find the attachment
Answer:
A.) It will remain the best explanation, because no one has come up with a better one yet
Explanation:
A parallel combination of 3ohms and 4ohms resistor is connected in series with a resistor of 4ohms and a battery of negligible resistance. Calculate the effective resistance in the circuit
Answers
Answer:
Explanation:
Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .
R₁ = 3 x 4 / ( 3 + 4 )
= 12 / 7 = 1.7 ohms .
This equivalent resistance is connected with 4 ohms in series
Total resistance = 1.7 ohms + 4 ohms
= 5.7 ohms.
Hence effective resistance of the circuit = 5.7 ohms .
What would the axes be labelled on a graph that allows you to calculate VELOCITY?
Answers
And velocity Velocity
A nucleus with mass number 229 emits a 3.443 MeV alpha particle. Calculate the disintegration energy Q for this process, taking the recoil energy of the residual nucleus into account.
Answers
Answer:
3.504 MeV
Explanation:
Given that;[tex]\frac{A}{Z} X ---->\frac{A-4}{Z-2} Y +\alpha + Q[/tex]
Also;
[tex]Q= KE_{\alpha } (M_{Y} + M_{\alpha } /M_{Y[/tex])
Mass number of X = 229
Mass number of Y = 225
Mass number of alpha particles = 4
Kinetic energy of alpha particles = 3.443 MeV
Q = 3.443 MeV (225 + 4/225)
Q= 3.504 MeV
hii can someone pls help me??
Answers
F = ma
F = 8.5 × 6
F = 51 N
................
Moving along the elevtromagnetic spectrum from low frequency to high frequency, what , if anything, happens to the wavelength?
wavelength get longer
wavelength remains constant
the wavelengths get shorter
wavelength eventually disappear altogether
Answers
Explanation:
the wavelengths get shorter
The point A on the above graph is an example of
extrapolation
variation
interpolation
average method
Answers
Answer:
Interpolation
Explanation:
The graph shows that it falls between 2 values and interpolation means that you estimate the unknown values that fall between the 2 values. Hope this helps!
The data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Extrapolation is the process of extending a line connecting the data points beyond the given data points to make inferences based on the previous trend of the data set. This helps us to understand what will happen in the future if the trend continues in the same manner.
Interpolation is the process of determining an unknown variable between two known variables. In this process the data point is located within the line connecting the data points.
In this given graph, the data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Learn more here: https://brainly.com/question/11958294
Does a feather fall as fast as a rock in a vacuum? If so why?
Answers
Answer:
No.
Explanation:
A feather is less dense and thus less force exerted while a rock is very dense thus exerting more force .
A beam strikes an irregular mirror and is reflected as shown below. The angle formed by the incoming beam and the reflected beam is 10 degrees. What is the angle of the mirror's surface (measured against vertical) at the location where the beam strikes the mirror?
A. The mirror's surface is angled 5 degrees upward where the laser strikes it.
B. The mirror's surface is angled 5 degrees downward where the laser strikes it.
C. The mirror's surface is angled 10 degrees upward where the laser strikes it.
D. The mirror's surface is angled 10 degrees downward where the laser strikes it.
Answers
Answer:
the correct answer is B
Explanation:
The law of reflection states that the angles of incidence and reflection on a surface are the same, the two rays and the normal are in the same part of the surface.
In this exercise indicate that the angle between the incident and reflected ray is 10, therefore the angle with respect to the normal that is a vertical line at the point of contact of the ray must be 5
Consequently the correct answer is B
Which term BEST describes energy
stored in batteries and food?
potential energy
kinetic energy
heat energy
chemical energy
Answers
Jorge tightens a bolt on his bicycle with a wrench that is 0.20 m long. If he pulls perpendicularly on the end of the wrench with a force of 140 N, how much torque does he apply ?
Answers
Answer:
28Nm
Explanation:
Torque is expressed as the prduct of force and radius
Given
Force = 140N
radius = 0.20m
Torque = 140 * 0.2
Torque = 140 * 1/5
Torque = 28Nm
Hence the amouunt of torque applied is 28Nm
A 4kg and 5kg bodies moving on a frictionless horizontal surface at a velocity of ( -6i )m/s and ( +3 )m/s respectively. Collide a head on elastic collision. What is the velocity ( magnitude and direction) of the each body after collision?
Answers
Answer:
4 kg → +4 m/s
5 kg → -5 m/s
Explanation:
The law of conservation of momentum states that:
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'left side → velocities before collisionright side → velocities after collisionYou'll notice that we have two missing variables: v₁' & v₂'. Assuming this is a perfectly elastic collision, we can use the conservation of kinetic energy to set the initial and final velocities of the individual bodies equal to each other.
v₁ + v₁' = v₂ + v₂'Let's substitute all known variables into the first equation.
(4)(-6) + (5)(3) = (4)v₁' + (5)v₂' -24 + 15 = 4v₁' + 5v₂' -9 = 4v₁' + 5v₂'Let's substitute the known variables into the second equation.
(-6) + v₁' = (3) + v₂' -9 = -v₁' + v₂' 9 = v₁' - v₂'Now we have a system of equations where we can solve for v₁ and v₂.
-9 = 4v₁' + 5v₂' 9 = v₁' - v₂'Use the elimination method and multiply the bottom equation by -4.
-9 = 4v₁' + 5v₂' -36 = -4v₁' + 4v₂'Add the equations together.
-45 = 9v₂'-5 = v₂'The final velocity of the second body (5 kg) is -5 m/s. Substitute this value into one of the equations in the system to find v₁.
9 = v₁' - v₂'9 = v₁' - (-5) 9 = v₁' + 5 4 = v₁'The final velocity of the first body (4 kg) is 4 m/s.
We can verify our answer by making sure that the law of conservation of momentum is followed.
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂' (4)(-6) + (5)(3) = (4)(4) + (5)(-5)-24 + 15 = 16 - 25 -9 = -9The combined momentum of the bodies before the collision is equal to the combined momentum of the bodies after the collision. [✓]
On what factors does critical velocity depend on
Answers
Explanation:
The critical velocity is that velocity of liquid flow, up to which its flow is streamlined (laminar)& above which its flow becomes turbulent. It's denoted by Vc & it depends upon: Coefficient of viscosity of liquid (η) Density of liquid. Radius of the tube.
A positive charge is moving across a room from south to north. A magnetic field runs from east to west. In what direction is the magnetic force on the moving positive charge?
Answers
Answer:
the force is on the z axis, coming out of the blade
Explanation:
The direction of the magnetic force is given by the right hand rule,
For a positive charge, the thumb points in the direction of velocity, the other fingers extended in the direction of the magnetic field, and the palm points in the direction of force.
In this case.
Thumb points North
The fingers extended is in the east - west direction parallel to the blade
The palm is sticking out of the leaf, in the z direction
the answer is the force is on the z axis, coming out of the blade
what is a product made from no renewable resources
Answers
Answer:
a nail
Explanation:
Answer:
crude oil, natural gas, coal, and uranium. These are all resources that are processed into products that can be used commercially.
Explanation:
plsss helpp i really need this now thank u ❤️
Answers
Answer:
10.
parabolic
11.
Entirely horizontal
12.
45°
A 330.-ohm resistor is connected to a 5.00-volt battery. What is the current through the resistor?
Answers
Answer:
From Ohms Law
V=IR
V=5volts
R=33.0hms
I=V/R
I= 5/330
=0.0152A
The current flowing through the cross-section of the resistor is 0.0152A.
Given the data in the question;
Resistance; [tex]R = 330ohm[/tex]Voltage; [tex]V = 5.00V[/tex]Current; [tex]I = \ ?[/tex]Ohm's lawOhm's law states that "the current flowing through the cross-section of a conductor is directly proportional to the voltage across it".
It is expressed as;
[tex]V = IR[/tex]
Where V is voltage, I is current and R is the Resistance.
To determine the current flowing through the resistor, we substitute our given values into the expression above.
[tex]V = IR\\\\I = \frac{V}{R}\\ \\I = \frac{5.00V}{330\ Ohm} \\\\I = 0.0152A[/tex]
Therefore, the current flowing through the cross-section of the resistor is 0.0152A.
Learn more about Electric current here: https://brainly.com/question/2264542
What if the World turned to Gold?
Answers
Answer:
We would all freeze at close to absolute zero and gold will not be worth anything
Explanation:
20 POINTS:
Why does the initial hill of a roller coaster need to be steep?
Answers
Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity
Hope this helps! Good luck with future homework and exams!
Find the temperature of a mixture obtained by mixing 32 grams of water at a temperature of 22 degrees Celsius with 88 grams of water at a temperature of 75 degrees Celsius.
Answers
Answer:
60.87 °C
Explanation:
Applying,
Heat lost = heat gain
cm'(t₂-t₃) = cm(t₃-t₁).............. Equation 1
Equation 1 can futher be simplified to
m'(t₂-t₃) = m(t₃-t₁)................Equation 2
Where m' = mass of the hot water, m = mass of the cold water, t₁ = initial temperature of the cold water, t₂ = initial temperature of the hot water, t₃ = temperature of the mixture.
From the question,
Given: m' = 88 g, m = 32 g, t₁ = 22°C, t₂ = 75°C
Substitute these values into equation 2
88(75-t₃) = 32(t₃-22)
6600-88t₃ = 32t₃-704
32t₃+88t₃ = 6600+704
120t₃ = 7304
t₃ = 60.87 °C
A force of 20N displaces an object to 5m in 10s. Calculate the power.
Answers
Answer:
hope it helps you see the attachment for further information
ik its a lot but can u help
Answers
Answer:
your correct ans is D.
object float in liquid when its density is less than liquid and sinks when its density is more than liquid..
stay safe healthy and happy.
What are some core features of waves in physics?
Answers
Answer:
Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.
Explanation:
A forensics investigator discharged an assault rifle-replica such that the bullet fired at an angle of 30 (degrees) off the horizontal with an initial velocity
of 28
m/s northwest. What is the maximum height the bullet will reach?
O 14 m/s
10 m
O 30 km
O 0.4351 seconds
Answers
Answer:
Initial y-component of speed
Vy = 28 * sin 30 = 14 m/sec vertically
1/2 m Vy^2 = 2 m g h conservation of energy of y-component
h = Vy^2 / (2 * g) = 14^2 / (2 * 9.8) = 10 m
the degree of hotness and coldness of th body is.......
Answers
Answer:
Explanation:
The degree of hotness and coldness of the body is called temperature.
Which of the following statements explains how total time spent in the air is affected as a projectile's angle of launch is increased from 25 degrees to 50 degrees?
Answers
Answer:
Therefore letter C is the correct answer.
Explanation:
In a projectile motion the total time in the air can be calculated using the following equation:
We analyze the y-component motion.
[tex]v_{fy}=v_{iy}-gt[/tex]
When the final velocity (v(f)) is equal to zero we calculate the upward time and multiplying it by 2 we find the total time in the air. So we will have:
[tex]t_{tot}=2\frac{v_{iy}}{g}[/tex]
[tex]t_{tot}=2\frac{v_{i}sin(\theta)}{g}[/tex]
We can see that the total time is directly proportional to the angle, then when θ increase t increase.
Therefore letter C is the correct answer.
I hope it helps you!
which of the following is a vector physical quantity
a. speed
b. energy
c. mass
d. displacement
Answers
Answer:
D. displacement
Explanation:
Vector quantities have both magnitude and direction.
Scalar quantities have only magnitude.
If 150 Joules of work is needed to move a box 1000 cm, calculate the force that was used?
Answers
Answer:
[tex] \large{ \tt{☄ EXPLANATION}} : [/tex]
We're provided : Work ( W ) = 150 J & Displacement ( D ) = 1000 cm & We're asked to find out the force that was used. Firstly, Notice that we're provided the unit of Displacement as centimetre so we have to convert 1000 cm into m. Displacement ( D ) = [tex] \frac{1000}{ 100} = 10[/tex] m[tex] \large{ \tt{♡ \: LET'S \: GET \: STARTED}} : [/tex]
Work is defined as the product of force and Displacement. By definition ,[tex] \large{ \boxed{ \tt{❃ \: WORK ( \: W \: ) = FORCE\: ( \: F) \times DISPLACEMENT \: ( \: D \: )}}}[/tex]
- Plug the values and then simplify !
[tex] \large{ \bf{↦ \: 150 = F \times 10}}[/tex]
[tex] \large{ \bf{↦F\times 10 = 150}}[/tex]
[tex] \large{ \bf{↦ \: F = \frac{150}{10}}} [/tex]
[tex] \large {\bf{↦F = \boxed{ \bf{15} \: N}}}[/tex]
[tex] \boxed{ \boxed{ \large{ \tt{✤ \: OUR \: FINAL \: ANSWER : \boxed{ \bf{15 \: n}}}}}}[/tex]
KEEP READING , KEEP STUDYING , KEEP WORKING , KEEP PUSHING , KEEP TAKING CARE OF YOURSELF. YOUR HARD WORK WILL PAY OFF ! ♪ツ Hope I helped ! ۵
☪ Have a wonderful day / evening ! ☼
# StayInAndExplore ! ☂
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
A plane travels at an average speed of 600 kilometers per hour. How long
does it take the plane to travel 120 kilometers?
Answers
Answer:
12 mins
Explanation:
120km/600km = 1/5 or .2
60mins*0.2 = 12 mins