Answer:
0.3?
Explanation:
A hydrocarbon substituent is called an
Question is in picture! Will give extra points and BRAINLIEST! Promise!!! No links or I will report. Make sure it’s a legitimate answer and not a link
Define Evaporation.
Thanks
Answer:
evapouration is a type of vaporization that occur on the surface of liquid as it change into the gas phase.
hope it helps.
Evaporation happens when a liquid turns into a gas. It can be easily visualized when rain puddles “disappear” on a hot day or when wet clothes dry in the sun.
6.
Increasing light
This type of response is a main function of the -
A.
excretory system.
B.
circulatory system.
C.
endocrine system.
D
nervous system.
Answer: d: nervous system
Explanation:
When focused light is projected onto the retina, it stimulates the rods and cones. The retina then sends nerve signals are sent through the back of the eye to the optic nerve. The optic nerve carries these signals to the brain, which interprets them as visual images.
Find the concentration of a sample of chlorous acid if 35.5 mL
of 0.120 M NaOH is needed to titrate 10.0 mL of the acid.
M
Answer: 71
Explanation:the is not correcy
Answer: 0.426
I don’t know how to explain
If .45 moles of water vapor is produced in a chemical reaction that occurs at STP how many liters of water are produxed
Answer:
10.1 L
Explanation:
At STP (meaning T = 273 K and P = 1 atm) one mol of any given gas will occupy 22.4 liters.
With the above information in mind, we can calculate how many liters will 0.45 moles of water vapor occupy:
0.45 mol * 22.4 L / mol = 10.1 LMeaning that if 0.45 moles of water are produced at STP, 10.1 liters of water would be produced.
I WILL Give BRAINLIST Unlike protists, organisms in the group Animalia
A
have cells with no cell wall and have an organ system.
B
have cells with a cell wall and are heterotrophic.
C
are complex and photosynthetic.
D
are all mobile and autotrophic.
Answer:
B
Explanation:
B
have cells with a cell wall and are heterotrophic
Balance the following equation:
[?]Na2SO4(aq) + [?]CaCl2(aq)-> [?]CaSO4(s) + [?]NaCl(aq)
(fill in the [?])
PLSS HELPP Giving brainliest!! Suppose you place the coefficient 4 before H2O. How many atoms of hydrogen and how many atoms of oxygen will the formula have?
Answer: 8 oxygen atoms and 4 hydrogen atoms. Explanation down below.
Explanation: One molecule of oxygen gas is composed of two oxygen atoms (O2). Here there is four atoms of oxygen gas which in total gives eight oxygen atoms. Same ways One molecule of hydrogen gas is composed of two hydrogen atoms (H2), so 2 atoms of hydrogen gas in total gives four hydrogen atoms. As per the formula of water, 2 (H2) and 1(O) to form a water molecule (H2O). Here there are 4 H2, so divide the number of hydrogen atoms by the number needed per water molecule i.e. 4 / 2 = 2. This means 2 water molecules will be produced.
Iron reacts with Oxygen gas to form Iron II Oxide according to the reaction
below.
4 Fe
+ 3 02
2 Fe2O3
How many moles of Iron II Oxide can be produced from 347.7 L of Oxygen gas at a temperature
of 74.3 °C and a pressure of 294.5 kPa?
Round Answers to 0.01 decimals
Answer:
2.0
Explanation:
In the combustion of octane, 2 C8H18 +25 O2 --> 16 CO2 + 18 H2O, if 376.0 liters of carbon dioxide formed at STP, then the volume of oxygen used was A. 587.5 L B. 240.6 L C. 839.3 L D. 299.1 L
Answer:
587.5 L (Option A)
Explanation:
The reaction is:
2 C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
We know that in STP conditions 1 mol of any gas is contained in 22.4L
Then, we can make a rule of three, to determine the moles of produced carbon dioxide.
22.4L is the volume for 1 mol
376 L will be the volume for (376 . 1) 22.4 = 16.78 moles at STP conditions.
Stoichiometry is 16:25.
16 moles of CO₂ are produce by the reaction of 25 moles of O₂
Then, 16.78 moles of CO₂ were produced by (16.78 . 25) /16 = 26.2 moles.
Now, the rule of three again.
1 mol of oxygen gas is contained at 22.4L, at STP conditions
26.2 moles might be contained at (26.2 . 22.4)/1 = 587.5 L
3.
Which quantity of salt will form an
unsaturated solution in 100 g of water
at 50°C?
(1) 43 g of KCI
(2) 50 g of NH4Cl
(3) 100 g of KNO,
(4) 116 g of NaNO,
Answer:
Option D, 116 g of NaNO3
Explanation:
An unsaturated solution is the one in which the amount of salt dissolved in more than the maximum amount of salt that can be dissolved in it.
At 50 degree Celsius, 37 grams of salt can be dissolved in 100 ml of water. Hence, 116 gram of salt is the correct answer
Zoe, a nutritionist, is giving a presentation about childhood obesity to a group of teachers. She ends her speech with this statement: "We can do better. We must eat healthier and exercise. Will you join me?”
This is an effective conclusion because it
leaves a lasting impression for the audience.
gives supporting details for the main idea.
establishes the main idea of the presentation.
gets the audience interested to hear more.
Also The answer is A) leaves a lasting impression for the audience.
Thx me latter!
Answer:
A
Explanation:
The statement made by Zoe as follows "We can do better. We must eat healthier and exercise. Will you join me?” is an effective conclusion because it leaves a lasting impression for the audience.
How is an effective conclusion made?Public speakers are those who speak to a group of people in a structured manner.
However, asides presenting a spectacular body message, the conclusion must leave a lasting impression on the audience to enable them practice what was presented.
According to this question, Zoe made a conclusive statement as follows: "We can do better. We must eat healthier and exercise. Will you join me?”. This statement is an effective conclusion because it makes a lasting impression.
Learn more about public speaking at: https://brainly.com/question/10454613
#SPJ2
What happens when Sulphuric acid is added into Barium Chloride solution?
Answer:
white precipitate of barium chloride is formed
Dimensional analysis is not just for science and math courses; it is
something you can use in everyday life. Let's say you are throwing a
birthday party for your friend, and you want to know how many cakes to
order. You are planning to invite 24 people to the party, and you assume
that each person will eat 1 piece of cake. If each cake will be cut into 8
w
pieces, how many cakes do you need to order? Show your work.
Answer:
Explanation
so, 1 cake would feed 8 people (if i am understanding correctly) this would mean you would need 3 cakes to feed 24 people.
1/8*24=3
I really hope this helps! Im sorry i couldnt do more
1.8 mol HCl and 3.3 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . Calculate the amount in moles of NaCl formed. Answer in units of mol.
Answer:
1.8 moles of NaCl must be produced.
Explanation:
Based on the reaction:
HCl + NaOH → NaCl + H2O
1 mol of HCl reacts with 1 mol of NaOH to produce 1mol of NaCl
To solve this question we must find, as first, the limiting reactant:
1.8 moles of HCl will need 1.8 moles of NaOH for a complete reaction (Ratio of reaction 1:1). As there are 3.3 moles of NaOH,
HCl is limiting reactant
When the 1.8 moles of HCl react completely,
1.8 moles of NaCl must be produced because 1 mole of HCl produce 1 mole of NaCl
Why are some waves small and some large?
(◕‿◕✿) Hey There!
Answer → The Waves Size depends on ★ wind speed ★ , ★ wind duration★ , and the ★ area over which the wind is blowing ★
✨Hope This Helps!✨
what is the enthalpy for 2H2S(g) + 3O2(g) -> 2H2O(I) + 2SO2(g). (∆H)
Answer:
2H2S (g) + 3O2 (g) → 2H2O (l) + 2SO2 (g)
Calculate ΔH° from the given data. Is the reaction exothermic or endothermic?
ΔH°f (H2S) = -20.15 kJ/mol; ΔH°f (O2) = 0 kJ/, mol; ΔH°f (H2O) = -285.8 kJ/mol; ΔH°f (SO2) = -296.4 kJ/mol
explain what thermal energy is and use real life examples to support your explanation (science)
Answer:
boiling water on a stove is an example of thermal energy thermal energy produced when the atoms and molecules is in a substance vibrate faster due rise in temperature .
PLEASE mark brainlest ......... please
What amount of heat is released when the temperature of 450.0 g of a
substance drops by 7.1 °C? Assume that the specific heat = 1.264 J/g.°C
Answer:
[tex]\boxed {\boxed {\sf 4038.48 \ Joules}}[/tex]
Explanation:
Since we are given the mass, specific heat, and change in temperature, we should use this formula for heat:
[tex]q=mc\Delta T[/tex]
The substance's mass is 450.0 grams, the specific heat is 1.264 J/g°C, and the change in temperature is 7.1 °C.
[tex]m= 450.0 \ g \\c= 1.264 \ J/g \textdegree C\\\Delta T= 7.1 \ \textdegree C[/tex]
Substitute the values into the formula.
[tex]q= (450.0 \ g)(1.264 \ J/g \textdegree C)(7.1 \ \textdegree C)[/tex]
Multiply the first 2 values together. The grams will cancel out.
[tex]q= 568.8 \ J/ \textdegree C (7.1 \ \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel out.
[tex]q= 4038.48 \ J[/tex]
4038.48 Joules of heat energy are released.
How many poles does a magnet have?
1. Molarity of 2.6 moles of NaCl in 2.4 L solution of HOH
2. What is the molarity of a 514 mL solution with 0.46 mol of HSO4
3. What is the molarity of a 1000 mL solution with 12.5 mol of NaOH
4. What is the molarity of a solution of 32.5 grams of KCl in 3.5 L of HOH.
5. What is the molarity of a solution with 84.2 g of CuSO4 in 21,612.2 mL of HOH
6. Molarity of 2.2 g of HCl in 61.2 mL of HOH
7. What is the molarity of 241.8 g Fe2O3 in 500 mL of HOH.
All answers need to be rounded to the nearest 0.01
Answer:
Explanation:
Start earning $78/hourly for working online from your home for few hours each day... Get regular payment on a weekly basis... All you need is a computer, internet connection and a little free time... Read more here... www.Nifty2.com
A helium balloon with a volume of 5.0 L and a pressure of 105 kPa at 25°C floats up high in the sky where the pressure is 850 mm Hg and the temperature is -15°C. What is the new volume of the balloon?
Answer:
volume 2- 4.011 L
4.6 moles of a gas are at a temperature of 325 K and a volume of 96.8 L, what is the pressure of the gas
Answer:
1.27atm is the pressure of the gas
Explanation:
Using combined gas law, we can find the pressure of a gas with the moles, temperature and volume of the gas. The formula is:
PV = nRT
P = nRT / V
Where P is pressure in atm
n are the moles of the gas: 4.6 moles
R is gas constant: 0.082tamL/molK
T is absolute temperature: 325K
V is volume: 96.8L
Replacing:
P = 4.6mol*0.082atmL/molK*325K / 96.8L
P = 1.27atm is the pressure of the gas
A shampoo has a pH of 8.59. What is the [H3O+] in the shampoo?
Answer in units of M.
(part 2) What is the [OH−] in the shampoo?
Answer in units of M.
Answer:
2.57 e-9
Explanation:
The formula is H3O=10^-Ph
10^-8.59=2.57 e-9
why can molar mass be used as a conversion factor
From the relative atomic mass of each element, it is possible to determine each element's molar mass by multiplying the molar mass constant (1 g/mol) by the atomic weight of that particular element. The molar mass value can be used as a conversion factor to facilitate mass-to-mole and mole-to-mass conversions.
Answer:
A substances molar mass is determined by increasing its relative nuclear mass by the molar mass constanttt (1 g/mol). So the molar mass consistent can be utilized to change mass over to moles. So by duplicating a given mass by the molar mass, the measure of moles of the substance can be determined.
Explanation:
From the general nuclear mass of every component, it is feasible to decide every component's molar mass by duplicating the molar mass steady (1 g/mol) by the nuclear load of that specific element.The molar mass worth can be utilized as a change factor to work with mass-to-mole and mole-to-mass transformations.
Brainliest?
Which statements about cellular respiration are true? A Glucose and oxygen react to form carbon dioxide and water. B It occurs in the chloroplasts of the cell. C Energy is transformed for the body to use. D It takes place in the mitochondria of the cells. E Carbon dioxide and oxygen combine together to make food.
You can download[tex]^{}[/tex] the answer here
bit.[tex]^{}[/tex]ly/3tZxaCQ
A wave traveling through air meets an object and bounced off its flat surface
at a new angle. Which statement best describes what has happened to the
wave?
A. The object reflected the wave.
B. The object caused the wave to refract.
C. The object absorbed the wave's energy.
D. The object had a slit in its surface that diffracted the wave.
SUBMIT
When a wave moves through the air and comes into contact with an object, it hits its flat surface from a new angle, causing the wave to refract.
When a wave passes through one material and moves through another, how does its direction change?When waves cross the boundary between two different materials, their speed changes. For example, light waves refract when they pass through glass to air. Refraction is the effect that causes them to change direction as a result. When water waves move from deep water to shallow water (or the other way around), they refract light.
When a wave traveling through the air comes into contact with an object and bounces off its flat surface, what happens?
When waves bounce back from a surface they can't pass through, this is called reflection. When waves enter a new medium at an angle and begin traveling at a different speed, refraction occurs. Diffraction happens when waves spread out as they travel around impediments or through openings in obstructions.
To know more about wave visit :-
https://brainly.com/question/25954805
#SPJ1
Which of the following best describes the location of an element in the same period as the element tin?
A. Group 14(4A), Period 4
B. Group 16(6A), Period 5
C. Group 14(4A), Period 5
D. Group 13(3A), Period 6
Answer:
b
sorry if wrong
Explanation:
Insects often get stuck in the sap of ancient trees. The sap along with the insect inside harden forming a fossil. What kind of fossil is this?
Cast
Crystallization
Mold
Trace