please help me with this question​

Answer: 0.390625 grams

Explanation:

A half-life of an element is the amount of time that it takes for half the mass of the element to decay.

Gold-198 having a half-life of 2.5 days therefore means that every 2.5 days, the mass is cut in half.

If there are 20 days, find out how many half-life periods there are:

= 20 / 2.5

= 8 periods

The half life is:

= Original mass * 0.5^number of half-life periods

= 100 * 0.5⁸

= 0.390625 grams

Answer:

E = 1.45 x 10⁹ J = 1.45 GJ

Explanation:

According to the law of conservation of energy:

Potential Energy Lost by Satellite = Kinetic Energy + Internal Energy

[tex]mgh = \frac{1}{2} mv^2 + E\\\\E = mgh - \frac{1}{2} mv^2[/tex]

where,

E = Internal Energy = ?

m = mass = 400 kg

g = acceleration due to gravity = 9.81 m/s²

h = height = 500 km = 500000 m

v = speed on ground = 1.6 km/s = 1600 m/s

Therefore,

[tex]E = (400\ kg)(9.81\ m/s^2)(500000\ m)-\frac{1}{2} (400\ kg)(1600\ m/s)^2\\E = 1.962\ x\ 10^9\ J - 0.512\ x\ 10^9\ J[/tex]

E = 1.45 x 10⁹ J = 1.45 GJ

Given :

A gerbil wheel has a radius of 3.2 inches. The gerbil can spin the wheel at a rate of 35 rotations per minute.

To Find :

The angular speed of the wheel in degrees per minute and the linear speed of wheel in inches per minute.

Solution :

Angular speed is given by :

[tex]\omega = 25\ rpm \\\\\omega = 25\times 360^o \ per \ minute\\\\\omega = 9000^o \ per \ minute[/tex]

Now, velocity is given by :

[tex]v = Radius\times \dfrac{RPM}{60\ sec/min}\times 2\pi\ rad/rev\\\\v = 3.2 \times \dfrac{35}{60}\times 2\pi\\\\v = 11.73\ m/s[/tex]

Hence, this is the required solution.

Answer:

Question 1: the plates are moving toward one another.

Question 2: The Himalayan Mountains in India

Question 3: Because mountains are formed instead.

Explanation:

The paragraph explains that the plates continue to move closer to one another while forming multiple mountains.

The paragraph explains, " a well-known example of this is the formation of the Himalayan Mountains in India,"

The area of the Himalayan Mountains are better suited for the formation of mountains rather than volcanoes.

Have a nice day!! Good Luck!! Brainliest would be appreciated!!!

Answer:

Step 1: A Bill Is Born

Anyone may draft a bill; however, only members of Congress can introduce legislation, and, by doing so, become the sponsor(s). The president, a member of the cabinet or the head of a federal agency can also propose legislation, although a member of Congress must introduce it.

Step 2: Committee Action

As soon as a bill is introduced, it is referred to a committee. At this point the bill is examined carefully and its chances for passage are first determined. If the committee does not act on a bill, the bill is effectively "dead."

Step 3: Subcommittee Review

Often, bills are referred to a subcommittee for study and hearings. Hearings provide the opportunity to put on the record the views of the executive branch, experts, other public officials and supporters, and opponents of the legislation.

Step 4: Mark up

When the hearings are completed, the subcommittee may meet to "mark up" the bill; that is, make changes and amendments prior to recommending the bill to the full committee. If a subcommittee votes not to report legislation to the full committee, the bill dies. If the committee votes for the bill, it is sent to the floor.

Step 5: Committee Action to Report a Bill

After receiving a subcommittee's report on a bill the full committee votes on its recommendation to the House or Senate. This procedure is called "ordering a bill reported."

Step 6: Voting

After the debate and the approval of any amendments, the bill is passed or defeated by the members voting.

Step 7: Referral to Other Chamber

When the House or Senate passes a bill, it is referred to the other chamber, where it usually follows the same route through committee and floor action. This chamber may approve the bill as received, reject it, ignore it, or change it.

Step 8: Conference Committee Action

When the actions of the other chamber significantly alter the bill, a conference committee is formed to reconcile the differences between the House and Senate versions. If the conferees are unable to reach agreement, the legislation dies. If agreement is reached, a conference report is prepared describing the committee members' recommendations for changes. Both the House and Senate must approve the conference report

Step 9: Final Action

After both the House and Senate have approved a bill in identical form, it is sent to the president. If the president approves of the legislation, he signs it and it becomes law. Or, if the president takes no action for ten days, while Congress is in session, it automatically becomes law.If the president opposes the bill he can veto it; or if he takes no action after the Congress has adjourned its second session, it is a "pocket veto" and the legislation dies.

Step 10: Overriding a Veto

If the president vetoes a bill, Congress may attempt to "override the veto." If both the Senate and the House pass the bill by a two-thirds majority, the president's veto is overruled and the bill becomes a law.

Explanation:

good luck!

Answer: [tex]0.00680\ m^3[/tex]

Explanation:

Given

The weight of the object, when submerged in the water is [tex]980\ N[/tex]

When it is submerged in the bromine liquid, it weighs [tex]840\ N[/tex]

Suppose,

[tex]\rho=\text{Density of object}\\\rho_w=\text{Density of water}\\\rho_b=\text{Density of bromine}\\V=\text{Volume of the object}[/tex]

for water,

[tex]\Rightarrow V(\rho -\rho_w)g=980\quad \ldots(i)[/tex]

For bromine

[tex]\Rightarrow V(\rho-\rho_b)g=840\quad \ldots(ii)[/tex]

Divide (i) and (ii)

[tex]\Rightarrow \dfrac{\rho-1000}{\rho-3100}=\dfrac{980}{840}\\\\\Rightarrow 840\rho -840\times 1000=980\rho-980\times 3100\\\\\Rightarrow 140\rho=(3038-840)\cdot 1000\\\\\Rightarrow \rho=15,700\ kg/m^3[/tex]

Put the density value in equation (i)

[tex]\Rightarrow V(15,700-1000)\cdot 9.8=980\\\\\Rightarrow V=\dfrac{100}{14,700}\\\\\Rightarrow V=0.00680\ m^3[/tex]

Answer:

a. True

Explanation:

The law of conservation of Energy states that energy cannot be destroyed but can only be converted or transformed from one form to another. Therefore, the sum of the initial kinetic energy and potential energy is equal to the sum of the final kinetic energy and potential energy.

Mathematically, it is given by the formula;

Ki + Ui = Kf + Uf .......equation 1

Where;

Ki and Kf are the initial and final kinetic energy respectively.

Ui and Uf are the initial and final potential energy respectively.

The First Law of Thermodynamics is another way to describe the Law of Conservation of Energy. Typically, the First Law of Thermodynamics states that the change of internal energy of a system is equal to the sum of external work and heat spent on the system.

Mathematically, the First Law of Thermodynamics is given by the formula;

ΔU = Q − W

Where;

ΔU represents the change in internal energy of a system.

Q represents the net heat transfer in and out of the system.

W represents the sum of work (net work) done on or by the system.

Hence, the direction in which any thermodynamic process in nature can spontaneously occur isn't stated by the First Law of Thermodynamics.

Answer:

η = 0.2 = 20%

Explanation:

The relationship between the thermal efficiency of a heat engine and the Coefficient of Performance (COP) of the corresponding Heat Pump is given as follows:

[tex]\eta = \frac{1}{COP_{HP}}[/tex]

where,

η = thermal efficiency = ?

[tex]COP_{HP}[/tex] = Coefficient of Performance of Heat Pump = 5

Therefore,

[tex]\eta = \frac{1}{5} \\\\[/tex]

η = 0.2 = 20%

Answer:

Explanation:

it would be 3 because ju divide 12 by 4

Answer:

B,C,D

Explanation:

Ap3X

Answer: [tex]13.4\ m/s[/tex]

Explanation:

Given

The frequency of the source is [tex]f_o=960\ Hz[/tex]

Change in frequency is [tex]75\ Hz[/tex]

Speed of sound [tex]c=343\ m/s[/tex]

Suppose [tex]v[/tex] is the velocity of the observer

Doppler frequency is given by

[tex]f'=f_o\left(\dfrac{c\pm v_o}{c\pm v_s}\right)[/tex]

Here, the source is at rest

While approaching source, frequency is

[tex]f_1=f_o\left(\dfrac{c+v}{c}\right)\quad \ldots(i)[/tex]

While leaving, frequency is

[tex]f_2=f_o\left(\dfrac{c-v}{c}\right)\quad \ldots(ii)[/tex]

The difference in the frequency is

[tex]\Rightarrow f_1-f_2=75\\\\\Rightarrow f_o\left(\dfrac{c+v}{c}\right)-f_o\left(\dfrac{c-v}{c}\right)=75\\\\\Rightarrow f_o\left(\dfrac{2v}{c}\right)=75\\\\\Rightarrow v=\dfrac{75\times 343}{2\times 960}\\\\\Rightarrow v=13.39\approx 13.4\ m/s[/tex]

Answer:

0.34 m/s^2

Explanation:

force=mass × acceleration

400 =1200 × acceleration

acceleration=400/1200

=0.34 m/s^2

Answer:

F = 51.3°

Explanation:

The component of weight parallel to the inclined plane must be responsible for the rolling back motion of the car. Hence, the force required to be applied by the child must also be equal to that component of weight:

[tex]F = Parallel\ Component\ of\ Weight\ of\ Wagon= WSin\theta\\[/tex]

where,

W = Weight of Wagon = 150 N

θ = Angle of Inclinition = 20°

Therefore,

[tex]F = (150\ N)Sin\ 20^o[/tex]

F = 51.3°

Answer:

Explanation:

Magnetic field due to a long current carrying wire can be calculated as follows .

B = 10⁻⁷ x 2I / d where B is magnetic field , I is current .

The wire is along x -axis and the point is on y-axis at a distance of 0.8 m

Magnetic field at point of .8 m on y -axis

B₁ = 10⁻⁷ x 2 x 39 / 0.8  

= 97.5 x 10⁻⁷ T .

Second wire is parallel to  z-axis and passes through point on y-axis at a distance of 4.4 m . So the given point is at a distance of 4.4 - .8 = 3.6 m

Magnetic field

B₂ = 10⁻⁷ x 2 x 47 / 3.6  

= 26.11  x 10⁻⁷ T .

Both these magnetic fields are perpendicular to each other so

Resultant magnetic field

B = √ ( 26.11² + 97.5² ) x 10⁻⁷ T

= √( 681.73 + 9506.25 ) x 10⁻⁷ T

= √( 10187.98) x 10⁻⁷ T

= 100.93 x 10⁻⁷ T .

Answer: A. Ar

Explanation: not anything else besides Ar

Answer:

the charge generated in the circuit​ is 240 C.

Explanation:

Given;

current flowing in the circuit, I = 2A

time of current flow, t = 2 minutes = 2 x 60s = 120 s

The current flowing through a given circuit is defined as the quantity of charge flowing through the circuit in a given time.

[tex]I = \frac{Q}{t} \\\\Q = I t[/tex]

where;

Q is the charge flowing in the circuit

Q = 2 x 120

Q = 240 C

Therefore, the charge generated in the circuit​ is 240 C.

Answer:

The diameter of the hole is 5.6164 μm

Explanation:

Given the data in the question;

wavelength λ = 633 nm = 633 × 10⁻⁹ m

L = 4.0 M

width of the central maximum D = 1.1 cm.

Now,

Y = D / 2

Y = 1.1 / 2 = 0.55 cm

So diameter of the aperture will be;

α = 1.22λ / ( Y / L )

we substitute in our values;

α = ( 1.22 × (633 × 10⁻⁹ m)) / ( 0.55 / 4.0 )

α = 0.00000077226 / 0.1375

α = 5.6164 × 10⁻⁶ m

α = ( 5.6164 × 10⁻⁶ × 10⁶ ) μm

α = 5.6164 μm

Therefore, the diameter of the hole is 5.6164 μm

Answer:

a = 0.1962 m/s^2

Explanation:

The magnitude of kinetic friction exerted is given by

[tex]F_k=\mu_kN[/tex]

Where, μ_k= coefficient of kinetic friction= 0.02 and N = reaction force = mg

Where m= mass = 30 Kg and, g is acceleration due to gravity =9.81 m/s^2

F_k=0.02×30×9.81 =5.886 N

Now, since, there is no applied force this kinetic friction force will cause acceleration of the child

⇒ ma = F_k

here, a is the acceleration

⇒30a = 5.886

⇒ a = 0.1962 m/s^2

Answer:

Some of the copper wire needs to be exposed so that the battery can make a good electrical connection. ... You need to do this because the direction of a magnet field depends on the direction of the electric current creating it. The movement of electric charges creates a magnetic field.

Explanation:

In an electromagnet, it must the wire be connected to the battery for the magnet to work the current is flowing through into the wire once it is introduced.

The magnetic field is defined as the field the magnetic materials generate or when an electric charge moves in a field region that generates the magnetic field.

As we know, the electricity is often used to generate a magnetic field in electromagnets.

The current is flowing through into the wire once it is introduced, from either a battery or maybe another source of electricity. The looped wire is magnetized as if it were a magnetic material as a function of the magnetic field created around it.

Thus, in an electromagnet, it must the wire be connected to the battery for the magnet to work the current is flowing through into the wire once it is introduced.

Learn more about the magnetic field here:

brainly.com/question/14848188

#SPJ2

Answer:

it means a cell has 4.5Volt of electromtive force.

Answer: Higher.

Explanation: The doppler effect essentially. "The Doppler effect can be described as the effect produced by a moving source of waves in which there is an apparent upward shift in frequency for observers towards whom the source is approaching and an apparent downward shift in frequency for observers from whom the source is receding."

Answer:

  I = 12 A

Explanation:

For this exercise we use the relationship that voltage is proportional to the product of current and resistance

           V = I R

            I = V / R

let's calculate

            I = 120/10

            I = 12 A

Answer: 50 m

Explanation:

Given

The object is located 20 m to the right of origin at 1:00 PM and later it moved 30 to the left of the origin.

total displacement from its original place is the subtraction of the two place units i.e.

[tex]\Rightarrow 30-(-20)\\\Rightarrow 30+20=50\ m[/tex]

Answer and Explanation:

The answer is the second answer choice. This is because we humans can rebuild or build memories during the day, it doesn't have to happen via sleep.

The first answer choice IS a reason because you aren't working your brain as hard, so your brain has time to heal. A mouse study suggests that sleep helps restore the brain by flushing out toxins that build up during waking hours.

The third answer choice IS a reason because of the idea of Wish Fulfillment: Sigmund Freud suggested that dreams provide a psychic safety valve to discharge unacceptable feelings. The dream's manifest (apparent) content may also have symbolic meanings (latent content) that signify our unacceptable feelings.

The forth answer choice IS a reason because of the idea of Cognitive Development: Some researchers argue that we dream as a part of brain maturation and cognitive development.

#teamtrees #PAW (Plant And Water)

Answer:

The Formula is

Change in Momentum = Force * Time

or /\P= F/\t

Plug the numbers into that formula,

P=(2,000N)(3S)

Now Multiply

Your Change in Momentum (Or P) would be 6,000N*s

Please Give Brainliest/5 stars <3

The magnitude of the change in the car's momentum = 6000 N.s

The rate of change of momentum is equal to impulse . It is the change in the product of mass and velocity of the body or it can be calculated as force times time period for which force is been applied

Change in momentum = impulse(if change occur for few seconds ) = Force * time period

given

Force = 2000 N

mass = 2000 kg

time = 3 seconds

Change in momentum  = 2000 * 3 = 6000 N.s

The magnitude of the change in the car's momentum = 6000 N.s

learn more about Change in momentum  :

https://brainly.com/question/6270239?referrer=searchResults

#SPJ3

Answer:

49 kg is the mass of the couch.

Explanation:

GPE = mgh

9800 = m * 10 * 20

9800 = 200m

m = (9800/20) = 49 m

Thenks and mark me brainliest :))

Answer:

D

Explanation:

yes. The shortest object is traveling the fastest.

No,their lengths be used to rank the objects according to their speeds. Because the length of the object is depended on the frame of reference of the observer. Option A is correct.

A frame of reference is a mathematical and physical coordinate system whose origin, direction, and scale are given by a collection of reference points.

Because the length of each item is determined by the observer's frame of reference, If an observer is stationary yet traveling at near light speed, he will feel length contraction.

Otherwise, the length of the items should not alter for everyday pace.A spectator sees four identical objects flying at almost the speed of light.

No,their lengths be used to rank the objects according to their speeds. Because the length of the object is depended on the frame of reference of the observer.

Hence,option A is correct.

To learn more about the frame of reference to refer to the link;

https://brainly.com/question/12222532

#SPJ2

Answer:

f = 4.67 cm

Explanation:

Here, we can use the thin lens formula, as follows:

[tex]\frac{1}{f}= \frac{1}{p}+ \frac{1}{q}\\\\[/tex]

where,

f = focal length of lens = ?

p = distance of object from lens = 12.4 cm

q = distance of image from lens = 7.5 cm

Therefore,

[tex]\frac{1}{f} =\frac{1}{12.4\ cm} +\frac{1}{7.5\ cm}\\\\\frac{1}{f} = \frac{1}{4.67\ cm}[/tex]

f = 4.67 cm

Answer: c.2

Explanation:

Answer:

The Answer is c. 2

Explanation:

I literally just got done with the quiz