PLEASE HELP ME! THANK YOU IF YOU DO!!! ^^

Answer:

[tex]Y=34.3\%[/tex]

Explanation:

Hello there!

In this case, according to the balanced chemical reaction:

[tex]2Al + Cr_2O_3 \rightarrow Al_2O_3 + 2Cr[/tex]

We notice there is a 1:1 mole ratio between Al2O3 and Cr2O3; thus, the following stoichiometric setup is used to compute the theoretical yield first:

[tex]m_{Al_2O_3 }=23.3gCr_2O_3*\frac{1molCr_2O_3}{151.99gCr_2O_3} *\frac{1molAl_2O_3}{1molCr_2O_3} *\frac{101.96gAl_2O_3}{1molAl_2O_3} \\\\m_{Al_2O_3}=15.6gAl_2O_3[/tex]

Thus, the percent yield turns out:

[tex]Y=\frac{5.35g}{15.6g} *100\%\\\\Y=34.3\%[/tex]

Best regards!

Answer:

ions are deflected and the lighter the ions the more the deflection.

Placing magnetic field in the path of the ions cause them to move in a curved path.

Explanation:

This question is all about the way in which mass spectroscopy works. Mass spectroscopy Is one of the techniques in spectroscopy which is used in the identification of chemical compounds.

Mass spectroscopy works based on the principle of ionization. For a mass spectroscopy to start ionization must first occur that is to say this is the first step in the identification of compound in mass spectroscopy.

The following steps are involve in mass spectroscopy;

=> Ionization: the molecules of the sample are first ionized. The ions formed here are positive ions.

=> Acceleration: the ions in step one are accelerated.

=> Deflection: the smaller ions get deflected more than the bigger ions. The magnetic field is used in the deflection of this ions.

=> Detection: the ions are then detected.

Therefore, to answer the question, the ions are deflected and the lighter the ions the more the deflection.

Placing magnetic field in the path of the ions cause them to move in a curved path.

Answer:

awdaef

Explanation:

Answer:

22 g

Explanation:

Step 1: Write the balanced equation

N₂(g) + 3 H₂(g) ⇒ 2 NH₃(g)

Step 2: Calculate the moles of NH₃ produced from 2.0 moles of H₂

The molar ratio of H₂ to NH₃ is 3:2.

2.0 mol H₂ × 2 mol NH₃/3 mol H₂ = 1.3 mol NH₃

Step 3: Calculate the mass corresponding to 1.3 moles of NH₃

The molar mass of NH₃ is 17.03 g/mol.

1.3 mol × 17.03 g/mol = 22 g

Answer:

option A iis the right answer

Answer:

Coron, Palawan, El Nido, Palawan, Cebu, Boracay, Siargao.

Explanation:

I hope this helps.

coron,palawan,El nidu, Cebu and boracay are 5 island in Philippines.....

Answer:

C)

Explanation:

Answer:

A. It increase the concentration of OH in solutions.

Explanation:

Bases are substances that react with and neutralise acids, producing water. When dissolved, bases release hydroxide ions, OH-(aq) into solution.

When a base dissolves, it increases the concentration of OH⁻ ions in the solution. Therefore, option A is correct.

An acid can be described as a substance that is capable of donating a hydrogen ion to another substance.  A base can be described as a molecule or ion that is able to have a hydrogen ion from an acid.

Acidic materials are commonly identified by sour taste. An acid can be considered commonly a molecule that can donate an H⁺ ion and can be energetically favorable after a loss of H⁺ ion. Acids increase the concentration of H⁺ ions in solution.

Bases are described by a bitter taste and a slippery nature. A base or alkali increases the concentration of OH⁻ ions in the solution. When bases react with acids, they give salts and water as products.

The pH range on the pH scale of the acids lies between 0 to 7 and the pH range of the bases lies between 7 to 14.

Learn more about acids and bases, here:

brainly.com/question/3941445

#SPJ2

Answer:

the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L  

Explanation:

Given that;

Tank volume v = 3250 liters

wastewater flows into the tank Q = 200 L/min

TCE concentration Co= 25 mg/L

reactor decays TCE at a reaction rate K = 0.20 min-1

mass balance

we know that;

Accumulation = inflow - outflow ± generation

⇒dc/dt = QCo - Qc ± rc.V

now at a steady state; dc/dt = 0

so

0 = QCo - Qc + rcV

where rc = -kc

0 = QCo - Qc - kcV

Qc + kcV = QCo

c(Q + kV) = QCo  

c = QCo / (Q + kV)

so we substitute

c = (200 × 25) / (200 + (0.2×3250))

c = 5000 / 850

c = 5.88 mg/L      

Therefore,  the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L  

Answer:

[tex]V=5.2 mL=0.052L[/tex]

Explanation:

Hello!

In this case, since the chemical reaction between silver nitrate and sodium chloride is:

[tex]AgNO_3(aq)+NaCl(aq)\rightarrow AgCl(s)+NaNO_3(aq)[/tex]

We can see there is a 1:1 mole ratio between each solution; thus, we first compute the moles of each reactant considering their molar masses:

[tex]n_{AgNO_3}=14.77g*\frac{1mol}{169.87g}=0.087molAgNO_3\\\\ n_{NaCl}=0.2631g*\frac{1mol}{58.44}=0.0045molNaCl[/tex]

Now, since the concentration of the silver chloride solution is 0.087 M, we may assume that the concentration of the NaCl solution is the same, so we can compute the volume as shown below:

[tex]V=\frac{n_{NaCl}}{M}=\frac{0.0045mol}{0.087mol/L}\\\\V=0.052L[/tex]

Or:

[tex]V=5.2 mL[/tex]

Best regards!

The volume of solution needed to react with 0.2631 g of NaCl  is 0.052 L.

Volume of the solution will be calculated by using the below formula:

M = n/V, where

M = concentration in terms of molarity

n = no. of moles

V = volume

Given chemical reaction is:

AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)

First we calculate the moles of given reactants by using the formula:

n = W/M , where

W = given mass

M = molar mass

Moles of AgNO₃ = 14.77g / 169.87g/mole = 0.087 mole

Moles of NaCl = 0.2631g / 58.44g/mole = 0.0045 mole

Concentration of AgNO₃ = 0.087 mole / 1L = 0.087M

From the stoichiometry of the reaction it is clear that mole ration of AgNO₃ & NaCl is 1:1. So, we take the concentration of NaCl is equal to the concentration of AgNO₃ and calculate the volume by using the above formula as:

Volume of NaCl = 0.0045mole / 0.087M = 0.052 L

Hence, 0.052 L is the required volume of NaCl.

To know more about moles, visit the below link:

https://brainly.com/question/17199947

Answer:

1,2 di methyl 5 ene tri chloro hexane

Answer:

NH₃

M = n/V(L)

0.844 mol (Both numbers have 3 significant figures so the result has 3 significant figures as well)

Explanation:

Step 1: Given and required data

Step 2: Calculate the moles (n) of ammonia (solute)

Molarity is equal to the moles of solute divided by the liters of solution.

M = n/V(L)

n = M × V(L)

n = 2.25 mol/L × 0.375 L = 0.844 mol (Both numbers have 3 significant figures so the result has 3 significant figures as well)

A (they are experimentally determined exponents)

Answer:

2.0 × 10⁴ mg

Explanation:

Step 1: Given data

Mass (m): 0.020 kg

Step 2: Convert the mass from kilograms to grams

We will use the conversion factor 1 kg = 1,000 g.

0.020 kg × (1,000 g/1 kg) = 20 g

0.020 kg is equal to 20 g.

Step 3: Convert the mass from grams to milligrams

We will use the conversion factor 1 g = 1,000 mg.

20 g × (1,000 mg/1 g) = 2.0 × 10⁴ mg

20 g is equal to 2.0 × 10⁴ mg. Then, 0.020 kg is equal to 2.0 × 10⁴ mg.

Answer:

[tex]m_{Hg}=829.4gHg[/tex]

Explanation:

Hello there!

In this case, considering the Avogadro's number, which helps us to realize that 1 mole of mercury atoms contains 6.022x10²³ atoms and at the same time 1 mole of mercury weights 200.59 g, we obtain:

[tex]m_{Hg}=2.49x10^{24}atoms*\frac{1mol}{6.022x10^{23}atoms} *\frac{200.59g}{1molHg}\\\\m_{Hg}=829.4gHg[/tex]

Best regards!

Answer:

If your asking what golds natural state of matter is it's solid.

Explanation:

Answer:

the answer is soild

Explanation:

i did it on edge :)

Answer:

ruthless, my style as a juvenile

ran with a gang, slanged in the meanwhile

Explanation:

Answer:

relation (but not a function)

Explanation:

c on edge

B

the sun!

yay

!!!!!!!!!!!

Answer:

EARTH

Explanation:

Earth‘s gravity, as already noted, is equivalent to 9.80665 m/s² (or 32.174 ft/s²). This means that an object, if held above the ground and let go, will accelerate towards the surface at a speed of about 9.8 meters for every second of free fall.

Answer:

Germanium monoxide

hope this helps :)

Answer:

BC = 10.28 ≈ 10.3 mi to the nearest tenth

Explanation:

Using the trigonometry rules; SOH CAH TOA,

TOA would be more suitable in this question.

Tan ∅ = Opposite / Adjacent

Tan 61 = BC / AB

1.8040 = BC / 5.7

BC =  5.7 * 1.8040

BC = 10.28 ≈ 10.3 mi

the answer is 10.3, i already rounded it.

Answer: Thus 24.0 g of [tex]SO_2[/tex] would be needed.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]      

[tex]\text{Moles of} O_2=\frac{6.00g}{32g/mol}=0.1875moles[/tex]

[tex]2SO_2(g)+O_2(g)\rightarrow 2SO_3(l)[/tex]  

According to stoichiometry :

1 mole of [tex]O_2[/tex] require = 2 moles of [tex]SO_2[/tex]

Thus 0.1875 moles of [tex]O_2[/tex] will require=[tex]\frac{2}{1}\times 0.1875=0.375moles[/tex]  of [tex]SO_2[/tex]  

Mass of [tex]SO_2=moles\times {\text {Molar mass}}=0.375moles\times 64g/mol=24.0g[/tex]

Thus 24.0 g of [tex]SO_2[/tex] would be needed to completely react with 6.00 g of [tex]O_2[/tex] such that all reactants could be consumed.

Answer:

[tex]V=3.50x10^{-22}L[/tex]

Explanation:

Hello there!

In this case, given the dimensions of the box, we first compute the volume by multiplying each side:

[tex]V=4nm*8.75nm*10nm=350nm^3[/tex]

Next, we apply the following conversion factor in order to obtain the corresponding liters:

[tex]V=350nm^3*(\frac{1m}{10^9nm} )^3*\frac{1000L}{1m^3} \\\\V=350nm^3*\frac{1m^3}{10^{27}nm^3} *\frac{1000L}{1m^3}\\\\V=3.50x10^{-22}L[/tex]

Best regards!

Answer:

64.7

Explanation:

Answer:

64.7 is the answer

hope this helps

have a good day :)

Explanation:

Answer:

Which infection may have fixes created because of their comprehension of construction and capacity of protein?

Answer:

biosphere and lithosphere

Explanation:

The biosphere is described as the zone of life on Earth. It is a sum of all ecosystems. The biosphere is composed of living organisms and non-living factors.

The lithosphere is the outer part of the Earth such that this part is rocky. The lithosphere is made up of the brittle crust.

In general, chemicals enter Ecosystems through the biosphere and lithosphere.

Answer:

1.99×10¯¹⁴ M

Explanation:

We'll begin by writing the balanced dissociation equation of pyridine. This is illustrated below:

C₅H₅N + H₂O <=> C₅H₆N⁺ + OH¯

From the balanced equation above,

1 mole of C₅H₅N produced 1 mole of OH¯.

Therefore, 0.502 M C₅H₅N will also produce 0.502 M OH¯.

Finally, we shall determine the concentration of hydronium ion, H₃O⁺ in the solution. This can be obtained as follow:

Concentration of Hydroxide ion [OH¯] = 0.502 M

Concentration of hydronium ion [H₃O⁺] =?

[H₃O⁺] [OH¯] = 1×10¯¹⁴

[H₃O⁺] × 0.502 = 1×10¯¹⁴

Divide both side by 0.502

[H₃O⁺] = 1×10¯¹⁴ / 0.502

[H₃O⁺] = 1.99×10¯¹⁴ M

Thus, the concentration of hydronium ion, H₃O⁺ in the solution 1.99×10¯¹⁴ M

Answer:

92.8%

Explanation:

Step 1: Given data

Step 2: Calculate the total mass of the bullet

The total mass of the bullet is equal to the sum of the masses of the elements that form it.

m = mPb + mSn + mSb = 11.6 g + 0.5 g + 0.4 g = 12.5 g

Step 3: Calculate the mass percentage of Pb in the bullet

We will use the following expression.

%Pb = mPb / m × 100%

%Pb = 11.6 g / 12.5 g × 100% = 92.8%