PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!! In California, Clay is surfing on a wave that propels him toward the beach with a speed of 5.0 m/s. The wave crests are each 20 m apart. What is the frequency of the water wave? (please show your work and equation used)

Complete question:

A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct?

A. the interior field points in a direction parallel to the exterior field

B. There is no electric field on the interior of the conducting sphere.

C. The interior field points in a direction perpendicular to the exterior field.

D. the interior field points in a direction opposite to the exterior field.

Answer:

B. There is no electric field on the interior of the conducting sphere.

Explanation:

Conductors are said to have free charges that move around easily. When the conductor is now placed in a static electric field, the free charges react to attain electrostatic equilibrium (steady state).

Here, a solid conducting sphere is placed in an external uniform electric field. Until the lines of the electric field are perpendicular to the surface, the free charges will move around the spherical conductor, causing polarization. There would be no electric field in the interior of the spherical conductor because there would be movement of  free charges in the spherical conductor in response to any field until its neutralization.

Option B is correct.

There is no electric field on the interior of the conducting sphere.

Answer:

[tex]\large \boxed{\text{3.3 cm}^{3}}[/tex]

Explanation:

Assume the stone consists of basalt, which has a density of 3.0 g/cm³.

[tex]\rho = \text{10 g}\times\dfrac{\text{1 cm}^{3}}{\text{3.0 g}} = \text{3.3 cm}^{3}\\\\\text{The volume of the stone is $\large \boxed{\textbf{3.3 cm}^{3}}$}[/tex]

Answer:

-1748*10^N/C

Explanation:

See attached file

Answer:

Explanation:

1 )

angular velocity of merry go round = 2π n

= 2π  x 3 / 60

ω = .1 x π radian / s

This will be the rotational speed of the whole system including that of Cora and Cameron . It will not depend upon their relative position with respect to

the centre of the merry go round .

So rotational speed of Cora = Rotational speed of Cameron

option ( d ) is correct .

2 )

Tangential speed  v = ω R where R is the distance from the centre of merry go round .

Tangential speed of Cora = .1 x π x 1

= .314 m /s

Tangential speed of Cameron = .1 x π x 2

= .628 m /s .

So tangential speed of Cameron is twice that of Cora .

Option ( e ) is correct .

Answer:

aaaaaaaaaaaaaaaaaaa

Explanation:

Answer:

[tex]\frac{50}{\pi }[/tex]Hz

Explanation:

In alternating current (AC) circuits, voltage (V) oscillates in a sine wave pattern and has a general equation as a function of time (t) as follows;

V(t) = V sin (ωt + Ф)            -----------------(i)

Where;

V = amplitude value of the voltage

ω = angular frequency = 2 π f        [f = cyclic frequency or simply, frequency]

Ф = phase difference between voltage and current.

Now,

From the question,

V(t) = 230 sin (100t)              ---------------(ii)

By comparing equations (i) and (ii) the following holds;

V = 230

ω = 100

Ф = 0

But;

ω = 2 π f = 100

2 π f = 100             [divide both sides by 2]

π f = 50

f = [tex]\frac{50}{\pi }[/tex]Hz

Therefore, the frequency of the voltage is [tex]\frac{50}{\pi }[/tex]Hz

Answer:

a. 70 rad/s²

b. 5000 rev

Explanation:

As we know,

[tex]\omega = 20000\frac{rev}{min}\frac{2 \pi rad}{1 \ rev}\frac{1 \ min}{60 \ sec}[/tex]

then,

[tex]\omega=2100 \ rad/s[/tex]

a...

⇒  [tex]\bar{\alpha}=\frac{\omega-\omega_{0}}{\Delta t}[/tex]

On substituting the values, we get

⇒      [tex]=\frac{2100}{30}[/tex]

⇒      [tex]=70 \ rad/s^2[/tex]

b...

⇒  [tex]\theta=\theta_{0}=\omega_{0}t+\frac{1}{2}\alpha t^2[/tex]

       [tex]=\frac{1}{2}\alpha t^2[/tex]

       [tex]=\frac{1}{2}\times 70\times (30)^2[/tex]

       [tex]=31500 \ rad[/tex]

       [tex]=31500 \ rad\frac{1 \ rev}{2\pi rad}[/tex]

       [tex]=5000 \ rev[/tex]

(a) The average angular acceleration will be 70 rad/s².

(b) 20063.69 revolutions have the centrifuge rotor turned during its acceleration period.

Angular acceleration is defined as the pace of change of angular velocity with reference to time. It is denoted by α. Its unit is rad/s².

The given data in the problem is;

n is the revolution of centrifugal rotor =  20000 rpm

t is the time interval= the 30s

(α) is the Angular acceleration=?

n₁ is the revolution when the acceleration is constant =?

(a) The average angular acceleration will be  70 rad/s².

The value of the angular velocity is given by

[tex]\rm \omega_f = \frac{2\pi N}{60} } \\\\ \rm \omega_f = \frac{2 \times 3.14 \times 20000}{60} \\\\ \rm \omega_f= 2100\ rad/sec.[/tex]

The formula for angular acceleration is guven by;

[tex]\rm \alpha =\frac{ \omega_f-\omega_i}{dt} \\\\ \rm \alpha =\frac{ 2100-0}{3}\\\\ \rm \alpha =70\ rad/sec^2[/tex]

Hence the average angular acceleration will be 70 rad/s².

(b 5000 revolutions have the centrifuge rotor turned during its acceleration period.

[tex]\rm \theta= \theta_0+\frac{1}{2} \alpha t^2 \\\\ \rm \theta= \frac{1}{2} \times 70 \times (30)^2 \\\\ \rm \theta=31500\ rad[/tex]

As we know that the angular velocity is given by

[tex]\rm \omega = \frac{\theta}{t} \\\\ \rm \omega = \frac{31500}{30} \\\\ \rm \omega = 1050 \ rad/sec[/tex]

The relation of angular velocity and revolution will be

[tex]\rm n= \frac{ \omega \times 60}{2\pi} \\\\ \rm n= \frac{ 2100 \times 60}{2\times 3.14 } \\\\ \rm n = 20063.69 \ rev[/tex]

Hence 20063.69 revolutions have the centrifuge rotor turned during its acceleration period.

To learn more about angular acceleration refer to the link ;

https://brainly.com/question/408236

Answer:

[tex]V_{f}[/tex] = 6 cm/s

Explanation:

Given:

Acceleration = a = 2 cm/s²

Time = t = 3s

Initial Velocity = [tex]V_{i}[/tex] = 0 cm/s

Required:

Velocity = [tex]V_{f}[/tex] = ?

Formula:

a = [tex]\frac{V_{f}-V_{i}}{t}[/tex]

Solution:

2 = [tex]\frac{V_{f}-0}{3}[/tex]

=> [tex]V_{f}[/tex] = 2*3

=> [tex]V_{f}[/tex] = 6 cm/s

Answer:

208 V

Explanation:

resistor voltage = Vr = 124 V

capacitor voltage Vc = 167 V

the total voltage in the RC circuit is the resultant voltage of the resistor and the capacitor

total voltage i= [tex]\sqrt{Vr^{2} + Vc^{2} }[/tex]

==> [tex]\sqrt{124^{2} + 167^{2} } =[/tex] 208 V

Answer:

[tex]v_i = 1.44\frac{m}{s}[/tex]

Explanation:

The computation of the initial velocity of the fly is shown below:-

But before that we need to do the following calculations

For 4.22 seconds

[tex]\bar v = \frac{-5.80 m}{4.22 s}[/tex]

[tex]= -1.37\frac{m}{s}[/tex]

For uniform acceleration

[tex]\bar v = \frac{v_i +v_f}{2}[/tex]

[tex]= v_i + v_f[/tex]

[tex]= -2.74\frac{m}{s}[/tex]

With initial and final velocities

[tex]= -1.33\frac{m}{s^2}[/tex]

[tex]= \frac{v_i +v_f}{4.22s}[/tex]

[tex]= -v_i + v_f[/tex]

[tex]= -5.61\frac{m}{s}[/tex]

So, the initial velocity is

[tex]v_i = 1.44\frac{m}{s}[/tex]

We simply applied the above steps to reach at the final solution i.e initial velocity

Complete Question:

A 0.50-kg ball that is tied to the end of a 1.5-m light cord is revolved in a horizontal plane, with the cord making a 30° angle with the vertical.

(a) Determine the ball’s speed. (b) If, instead, the ball is revolved so that its

speed is 3.7 m/s, what angle does the cord make with the vertical?

(Check attached image for the diagram.)

Answer:

(a) The ball’s speed, v = 2.06 m/s

(b) The angle the cord makes with the vertical is 50.40⁰

Explanation:

If the ball is revolved in a horizontal plane, it will form a circular trajectory,

the radius of the circle, R = Lsinθ

where;

L is length of the string

The force acting on the ball is given as;

F = mgtanθ

This above is also equal to centripetal force;

[tex]mgTan \theta = \frac{mv^2}{R} \\\\Recall, R = Lsin \theta\\\\mgTan \theta = \frac{mv^2}{Lsin \theta}\\\\v^2 = glTan \theta sin \theta\\\\v = \sqrt{glTan \theta sin \theta} \\\\v = \sqrt{(9.8)(1.5)(Tan30)(sin30)} \\\\v = 2.06 \ m/s[/tex]

(b) when the speed is 3.7 m/s

[tex]v = \sqrt{glTan \theta sin \theta} \ \ \ ;square \ both \ sides\\\\v^2 = glTan \theta sin \theta\\\\v^2 = gl(\frac{sin \theta}{cos \theta}) sin \theta\\\\v^2 = \frac{gl*sin^2 \theta}{cos \theta} \\\\v^2 = \frac{gl*(1- cos^2 \theta)}{cos \theta}\\\\gl*(1- cos^2 \theta) = v^2cos \theta\\\\(9.8*1.5)(1- cos^2 \theta) = (3.7^2)cos \theta\\\\14.7 - 14.7cos^2 \theta = 13.69cos \theta\\\\14.7cos^2 \theta + 13.69cos \theta - 14.7 = 0 \ \ \ ; this \ is \ quadratic \ equation\\\\[/tex]

[tex]Cos\theta = \frac{13.69\sqrt{13.69^2 -(-4*14.7*14.7)} }{14.7} \\\\Cos \theta = 0.6374\\\\\theta = Cos^{-1}(0.6374)\\\\\theta = 50.40 ^o[/tex]

Therefore, the angle the cord makes with the vertical is 50.40⁰

Answer:

a) 23.51 m/s

b) 1.07 kg

Explanation:

Parameters given:

Kinetic energy, K = 295 J

Momentum, p = 25.1 kgm/s

a) The kinetic energy of a body is given as:

[tex]K = \frac{1}{2} mv^2[/tex]

where m = mass of the body and v = speed of the body

We know that momentum is given as:

p = mv

Therefore:

K = 1/2 * pv

=> v = 2K / p

v = (2 * 295) / 25.1 = 23.51 m/s

The velocity of the body at that instant is 23.51 m/s.

b) Momentum is given as:

p = mv

=> m = p / v

m = 25.1 / 23.51  = 1.07 kg

The mass of the body at that instant is 1.07 kg

Answer:

Explanation:

Find the diagram relating to the question for proper explanation of the question below.

Using the principle of moment

Sum of clockwise moments = Sum of anticlockwise moments

Moment = Force * perpendicular distance

For anti-clockwise moment:

Since the 30 kg moves in the anticlockwise direction according to the diagram

ACW moment = 30 * 1 = 30 kgm

For clockwise moment

If another child sits 0.75 m away from the pivot point on the opposite side, moment of the child in clockwise direction = M * 0.75 = 0.75M (M is the mass of the unknown child).

Equating both moments we have;

0.75M = 30

M = 30/0.75

M = 40 kg

The second child's mass is 40 kg

Answer:

2.45 m/s

Explanation:

kinetic energy = 1/2 * m * v^2

then, 0.5 * 2500 * x^2 = 0.5 * 67 * 15^2

by solving for x, X = 2.45 m/s

Answer:

speed of puck acc. to the radar gun = 138 km/h

speed of player = 15 km/h

since the player is in motion when he shoots, the speed of the puck will be the sum of the speed of the player and the speed at which he shot. so,

speed of puck = speed of player + speed of puck acc. to player

138 = 15 + speed of puck acc. to player

speed of puck acc. to player = 138 -15

speed of puck acc. to player = 123 km/h

Brainly this answer if you think it deserves it

Answer:

A pie chart is a type of graph in which a circle is divided into sectors that each represents a proportion of the whole

Explanation:

pie charts are a useful way to organize data in order to see the size of components relative to the whole.

Answer:

Only the horizontal component of a projectile’s momentum is conserved. Where as The vertical component of the momentum is not conserved, because the net vertical force Fy–net is not zero

Explanation:

Answer:

In collision between equal-mass objects, each object experiences the same acceleration, because of equal force exerted on both objects.

Explanation:

In a collision two objects, there is a force exerted on both objects that causes an acceleration of both objects. These forces that act on both objects are equal in magnitude and opposite in direction.

Thus, in collision between equal-mass objects, each object experiences the same acceleration, because of equal force exerted on both objects.

Answer:

The rate at which energy is dissipated in the resistor is equal to the rate at which energy is stored in the inductor's magnetic field in 24.95 ms.

Explanation:

The energy stored in the inductor is given as

E₁ = ½LI²

The rate at which energy is stored in the inductor is

(dE₁/dt) = (d/dt) (½LI²)

Since L is a constant

(dE₁/dt) = ½L × 2I (dI/dt) = LI (dI/dt)

(dE₁/dt) = LI (dI/dt)

Rate of Energy dissipated in a resistor = Power = I²R

(dE₂/dt) = I²R

When the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field

(dE₁/dt) = (dE₂/dt)

OK (dI/dt) = I²R

L (dI/dt) = IR

Current in a this kind of series setup of inductor and resistor at any time, t, is given as

I = (V/R) (1 - e⁻ᵏᵗ)

k = (1/time constant) = (R/L)

(dI/dt) = (kV/R) e⁻ᵏᵗ = (RV/RL) e⁻ᵏᵗ = (V/L) e⁻ᵏᵗ

L (dI/dt) = IR

L [(V/L) e⁻ᵏᵗ] = R [(V/R) (1 - e⁻ᵏᵗ)

V e⁻ᵏᵗ = V (1 - e⁻ᵏᵗ)

e⁻ᵏᵗ = 1 - e⁻ᵏᵗ

2 e⁻ᵏᵗ = 1

e⁻ᵏᵗ = (1/2) = 0.5

e⁻ᵏᵗ = 0.5

In e⁻ᵏᵗ = In 0.5 = -0.69315

- kt = -0.69315

kt = 0.69315

k = (1/time constant)

Time constant = 36.0 ms = 0.036 s

k = (1/0.036) = 27.78

27.78t = 0.69315

t = (0.69315/27.78) = 0.02495 = 24.95 ms

Hope this Helps!!!

Answer:

Time taken to stop = 6 sec

Explanation:

Given:

Rotation of wheel = 1.10 × 10² rev/min

Final velocity (v) = 0

Angular acceleration (a) = - 1.92 rad/s²

Find:

Time taken to stop

Computation:

Initial velocity (u) = (1.10 × 10² × 2π rad) / 60 sec

Initial velocity (u) = 11.52 rad / sec

We know that,

V = U +at

t = (v-u)a

t = (0 - 11.52) / (-1.92)

Time taken to stop = 6 sec

Answer:

(a)    f = 0.58Hz

(b)    vmax = 0.364m/s

(c)    amax = 1.32m/s^2

(d)    E = 0.1J

(e)    [tex]x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Explanation:

(a) The frequency of the oscillation, in a spring-mass system, is calulated by using the following formula:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{k}{m}}[/tex]          (1)

k: spring constant = 20.0N/m

m: mass = 1.5kg

you replace the values of m and k for getting f:

[tex]f=\frac{1}{2\pi}\sqrt{\frac{20.0N/m}{1.5kg}}=0.58s^{-1}=0.58Hz[/tex]

The frequency of the oscillation is 0.58Hz

(b) The maximum speed is given by:

[tex]v_{max}=\omega A=2\pi f A[/tex]     (2)

A: amplitude of the oscillations = 10.0cm = 0.10m

[tex]v_{max}=2\pi (0.58s^{-1})(0.10m)=0.364\frac{m}{s}[/tex]

The maximum speed of the mass is 0.364 m/s.

The maximum speed occurs when the mass passes trough the equilibrium point of the oscillation.

(c) The maximum acceleration is given by:

[tex]a_{max}=\omega^2A=(2\pi f)^2 A[/tex]

[tex]a_{max}=(2\pi (0.58s^{-1}))(0.10m)=1.32\frac{m}{s^2}[/tex]

The maximum acceleration is 1.32 m/s^2

The maximum acceleration occurs where the elastic force is a maximum, that is, where the mass is at the maximum distance from the equilibrium point, that is, the acceleration.

(d) The total energy of the system is:

[tex]E=\frac{1}{2}kA^2=\frac{1}{2}(20.0N/m)(0.10m)^2=0.1J[/tex]

The total energy is 0.1J

(e) The displacement as a function of time is:

[tex]x(t)=Acos(\omega t)=Acos(2\pi ft)\\\\x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]

Answer:

STATIC,  STATIC

KINETIC friction is less than static friction

Explanation:

In this exercise you are asked to complete the sentences with the correct words.

STATIC friction prevents the relative movement of two surfaces in contact.

For moving surfaces the friction is STATIC is greater than the kinetic friction.

For the last two sentences I think they are misspelled, the correct thing is

KINETIC friction is less than static friction

Answer:

Explanation:

A converging lens id also known as a convex lens. A convex lens has a positive focal length.

Using the lens formula to determine the image distance from the lens for each object distance.

1/f = 1/u + 1/v

f = focal length

u = object distance

v = image distance

For an object placed at distance of 18.0cm with focal length 14.0cm,

1/v = 1/f-1/u

1/v = 1/14 - 1/18

1/v = 9-7/126

1/v = 2/126

v = 126/2

v = 63cm

Since the image distance is positive for an object 18cm from the lens, the image formed by the object at this distance is a real and inverted image.

The magnification = v/u = 63/18 = 3.5

Similarly for an object placed at distance of 7.0cm with focal length 14.0cm,

v = uf/u-f

v = 7(14)/7-14

v= -14.0 cm

Since the image distance is negative for an object placed 7.0 cm from the lens, the image formed by the object at this distance is a virtual and upright image.

The magnification = v/u = 14/7 = 2

Note that the negative value is not taken into account when calculating magnification. The negative value only tells us the nature of the image formed.

Answer:

for the first interference m = 1   y = 2,839 10-3 m

for the second interference m = 2   y = 5,678 10-3 m

Explanation:

The double slit interference phenomenon, for constructive interference is described by the expression

                d sin θ = m λ

where d is the separation between the slits, λ the wavelength and m an integer that corresponds to the interference we see.

In these experiments in general the observation screen is L >> d, let's use trigonometry to find the angles

           tan θ = y / L

with the angle it is small,

          tan θ = sin θ / cos θ = sin θ

we substitute

         sin θ = y / L

         d y / L = m λ

the distance between the central maximum and an interference line is

        y = m λ L / d

let's reduce the magnitudes to the SI system

     λ = 546 nm = 546 10⁻⁹ m

     d = 0.25 mm = 0.25 10⁻³ m

let's substitute the values

      y = m 546 10⁻⁹ 1.3 / 0.25 10⁻³

      y =  m 2,839 10⁻³

the explicit value for a line depends on the value of the integer m, for example

for the first interference m = 1

the distance from the central maximum to the first line is y = 2,839 10-3 m

for the second interference m = 2

the distance from the central maximum to the second line is y = 5,678 10-3 m

Answer:

21 m/s

Explanation:

There are three forces on the pendulum:

Weight force mg pulling down,

Vertical tension component Tᵧ pulling up,

and horizontal tension component Tₓ pulling towards the center of the curve.

Sum of forces in the y direction:

∑F = ma

Tᵧ − mg = 0

T cos 37° = mg

T = mg / cos 37°

Sum of forces in the centripetal direction:

∑F = ma

Tₓ = mv²/r

T sin 37° = mv²/r

(mg / cos 37°) sin 37° = mv²/r

g tan 37° = v²/r

v = √(gr tan 37°)

v = √(9.8 m/s² × 60 m × tan 37°)

v = 21 m/s

Answer:

Explanation:

Given that

speed u=4*10^6 m/s

electric field E=4*10^3 N/c

distance b/w the plates d=2 cm

basing on the concept of the electrostatices

now we find the acceleration b/w the plates

acceleration a=qE/m=1.6*10^-19*4*10^3/9.1*10^-31=0.7*10^15 =7*10^14 m/s

now we find the horizantal distance travelled by electrons hit the plates

horizantal distance X=u[2y/a]^1/2

=4*10^6[2*2*10^-2/7*10^14]^1/2

=3*10^-2=3 cm

now we find the velocity f the electron strike the plate

v^2-(4*10^6)^2=2*7*10^14*2*10^-2

v^2=16*10^12+28*10^12

v^2=44*10^12

speed after hits =>V=6.6*10^6 m/s

Answer:

Muons reach the earth in great amount due to the relativistic time dilation from an earthly frame of reference.

Explanation:

Muons travel at exceedingly high speed; close to the speed of light. At this speed, relativistic effect starts to take effect. The effect of this is that, when viewed from an earthly reference frame, their short half life of about two-millionth of a second is dilated. The dilated time, due to relativistic effects on time for travelling at speed close to the speed of light, gives the muons an extended relative travel time before their complete decay. So in reality, the muon do not have enough half-life to survive the distance from their point of production high up in the atmosphere to sea level, but relativistic effect due to their near-light speed, dilates their half-life; enough for them to be found in sufficient amount at sea level.  

Answer:

The greater the density of the electric field lines the stronger the electric field and vice versa

Explanation:

Electric field can be defined as the region where an electric force is experienced by a charged body. A charged body experiences a force whenever it is positioned close to another charged body.

An electric field may be described in terms of lines of force which represent the direction of a small positive charge placed at that point assuming that the charge is so small that it does not change appreciably in the presence of another charge. Arrows on the lines of force indicate the direction of the electric field.

The lines of force are indicated in such a way that the strength of the electric field is shown by the number or density of electric field lines crossing a unit area perpendicular to the lines. Hence, the greater the density of the electric field lines the stronger the the electric field and vice versa

Answer:

-i - 7j

Explanation:

The computation of components of the force is shown below:-

torque T = r cross F

T = (4.00 i + 5.00 j + 0 k) X (1.00 i + 7.00 j)

Now we will cross multiplying vectorilly

T = 4 × (iXi) + 28 × (jXi) + 0 + 5 × (iXj)35 × (jXj) + 0

T = 4 × 0 + 28 × (-k) + 5 × (k) + 35 × 0

T = 28 × (-k) + 5 × (k) = -23k

net torque |T| = 23 N - m

direction >> negative k

Or Simply we can do by the below method

r × f

28 - 5 = 23 K

-i - 7j

Answer:

Radius r = 20.34 cm

The radius that can produces such a disk is 20.34 cm

Explanation:

Area of a circle;

A = πr^2

A = area

r = radius

Making r the subject of formula;

r = √(A/π) ........1

Given;

A = 1300 cm^2

Substituting into the equation 1;

r = √(1300/π)

r = 20.34214472564 cm

r = 20.34 cm

The radius that can produces such a disk is 20.34 cm