Step-by-step explanation:
The difference between. Each numbers is 5 so, it's answer is 22 and 27
The population of Adamsville grew from 6000 to 13000 in 7 years. Assuming uninhibited exponential growth, what is the expected population in an additional 3 years?
Answer:
18107.32
Step-by-step explanation:
Set up the exponential function in the form:
[tex]P = P_0(R)^t[/tex]
so P is the new population, [tex]P_0[/tex] is the original population, R is the rate of increase in population, and t is the time in years.
You have to use the information given to find the rate that the population is increasing and then use that rate to find the new population after more time passes.
[tex]13000 = 6000(R)^7\\\\\\frac{13000}{6000} = R^7\\\\\sqrt[7]{\frac{13000}{6000} } = R\\\\\\ R = 1.116786872[/tex]
Now that you found the rate, you can use the function to find the population after another 3 years.
[tex]P = 13000(1.116786872)^3\\P = 18107.32317\\[/tex]
So the population is 18107, rounded to the nearest whole number.
Caleb puppy weighs 2250 grams if the puppy weight 600 grams at the last visit to the vets office what is the percent increase in the puppy's weight rounded to the nearest whole number
Answer: 375%
Step-by-step explanation:
375%. Simply do 2250/600 to get 3.75, or 375%.
Hope it helps <3
m−4+m−5 how do i solve this?
Answer:
2m-9
Step-by-step explanation:
m-4+m-5
=m+m-4-5
=2m-9
Answer:
2m-9
Step-by-step explanation:
m-4+m-5
take the like terms
= 2m-4-5
= 2m-9
Sorry if that didn't help
What is the solution to the system of equations?
y=-3x – 2
5x + 2y = 15
0 (-40. 19)
(-19.55)
(19-40)
(55.-19)
Answer:
Step-by-step explanation:
y = -3x - 2
5x + 2y = 15
5x + 2(-3x -2) = 15
5x -6x - 4 = 15
-x - 4 = 15
-x = 19
x = -19
y = -3(-19) - 2
y = 57 - 2
y = 55
(-19, 55)
solution is b
Which of the following is false? Correlation coefficient and the slope always have the same sign (positive or negative). If the correlation coefficient is 1, then the slope must be 1 as well. If the correlation between two variables is close to 0.01, then there is a very weak linear relation between them. Correlation measures the strength of linear association between two numerical variables.
Answer:
If the correlation coefficient is 1, then the slope must be 1 as well.
Step-by-step explanation:
Coefficient of correlation is used in statistics to determine the relationship between two variables. Correlation coefficient and slope always have same sign. It measures the strength of linear relation between two variables. The values of correlation coefficient ranges between 0 to 1. where 0 determines that there is no relationship between two variables.
If the correlation coefficient is 1, then the slope must be 1 as well.
The correlation coefficient (ρ) is a measure that determines the degree to which the movement of two different variables is associated.
Correlation coefficient and the slope both quantify the direction and strength of the relationship between two numeric variables. When the correlation (r) is negative, the regression slope (b) will be negative. When the correlation is positive, the regression slope will be positive.If the correlation between two variables is close to 0.01, then there is a very weak linear relation between them.
So, the false statement is:
If the correlation coefficient is 1, then the slope must be 1 as well.
Learn more:https://brainly.com/question/16557696
Lee watches TV for 2 hours per day. During that time, the TV consumes 150 watts per hour. Electricity costs (12 cents)/(1 kilowatt-hour). How much does Lee's TV cost to operate for a month of 30 days?
Answer:
$1.08
Step-by-step explanation:
30 days × (2 hrs/day) × (150 W) × (1 kW / 1000 W) × (0.12 $/kWh) = $1.08
I NEED HELP PLEASE, THANKS! :)
please see the attached picture for full solution..
Hope it helps..
Good luck on your assignment...
Brainliest to whoever gets this correct! Does this graph show a function? Explain how you know.A.No; there are y-values that have more than one x-value.B.No; the graph fails the vertical line test.C.Yes; the graph passes the vertical line test.D.Yes; there are no y-values that have more than one x-value.
Answer:
B. No; the graph fails the vertical line test.
Step-by-step explanation:
If you hold a pencil up to the graph, the parabola would technically touch the pencil at more than one point. That means it failed the test, and therefore it is not a function.
hope this helped :)
The highway fuel economy of a 2016 Lexus RX 350 FWD 6-cylinder 3.5-L automatic 5-speed using premium fuel is a normally distributed random variable with a mean of μ = 26.50 mpg and a standard deviation of σ = 3.25 mpg.
Required:
a. What is the standard error of X and the mean from a random sample of 25 fill-ups by one driver?
b. Within what interval would you expect the sample mean to fall, with 98 percent probability?
Answer:
a) 0.65 mpg
b) Between 24.99 mpg and 28.01 mpg.
Step-by-step explanation:
To solve this question, we need to understand the normal probability distribution and the central limit theorem.
Normal probability distribution
When the distribution is normal, we use the z-score formula.
In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.
Central Limit Theorem
The Central Limit Theorem estabilishes that, for a normally distributed random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the sampling distribution of the sample means with size n can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation, which is also called standard error, [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].
For a skewed variable, the Central Limit Theorem can also be applied, as long as n is at least 30.
In this question, we have that:
[tex]\mu = 26.50, \sigma = 3.25, n = 25, s = \frac{3.25}{\sqrt{25}} = 0.65[/tex]
a. What is the standard error of X and the mean from a random sample of 25 fill-ups by one driver?
s = 0.65 mpg
b. Within what interval would you expect the sample mean to fall, with 98 percent probability?
From the: 50 - (98/2) = 1st percentile
To the: 50 + (98/2) = 99th percentile
1st percentile:
X when Z has a pvalue of 0.01. So X when Z = -2.327.
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
By the Central Limit Theorem
[tex]Z = \frac{X - \mu}{s}[/tex]
[tex]-2.327 = \frac{X - 26.50}{0.65}[/tex]
[tex]X - 26.50 = -2.327*0.65[/tex]
[tex]X = 24.99[/tex]
99th percentile:
X when Z has a pvalue of 0.99. So X when Z = 2.327.
[tex]Z = \frac{X - \mu}{s}[/tex]
[tex]2.327 = \frac{X - 26.50}{0.65}[/tex]
[tex]X - 26.50 = 2.327*0.65[/tex]
[tex]X = 28.01[/tex]
Between 24.99 mpg and 28.01 mpg.
Approximate the area under the curve y = x^3 from x = 2 to x = 5 using a Right Endpoint approximation with 6 subdivisions.
Answer:
182.8125
Step-by-step explanation:
Given:
y = x^3
from [2,5] using 6 subdivisions
deltax = (5 - 2)/6 = 3/6 = 0.5
hence the subdivisions are:
[2, 2.5]; [2.5, 3]; [3, 3.5]; [3.5, 4]; [4, 3.5]; [4.5, 5]
hence the right endpoints are:
x1 = 2.5; x2 = 3; x3 = 3.5; x4 =4; x5 = 4.5; x6 = 5
now the area is given by:
A = deltax*[2.5^3 + 3^3 + 3.5^3 + 4^3+ 4.5^3 + 5^3]
A = 0.5*365.625
A = 182.8125
Area using Right Endpoint approximation is 182.8125
The area of the region is an illustration of definite integrals.
The approximation of the area of the region R is 182.8125
The given parameters are:
[tex]\mathbf{f(x) = x^3}[/tex]
[tex]\mathbf{Interval = [2,5]}[/tex]
[tex]\mathbf{n = 6}[/tex] ------ sub intervals
Using 6 sub intervals, we have the partitions to be:
[tex]\mathbf{Partitions = [2,2.5]\ u\ [2.5, 3]\ u\ [3,3.5]\ u\ [3.5,4]\ u\ [4,4.5]\ u\ [4.5,5]}[/tex]
List out the right endpoints
[tex]\mathbf{x= 2.5,\ 3,\ 3.5,\ 4,\ 4.5,\ 5}[/tex]
Calculate f(x) at these partitions
[tex]\mathbf{f(2.5) = 2.5^3 = 15.625}[/tex]
[tex]\mathbf{f(3) = 3^3 = 27}[/tex]
[tex]\mathbf{f(3.5) = 3.5^3 = 42.875}[/tex]
[tex]\mathbf{f(4) = 4^3 = 64}[/tex]
[tex]\mathbf{f(4.5) = 4.5^3 = 91.125}[/tex]
[tex]\mathbf{f(5) = 5^3 = 125}[/tex]
So, the approximated value of the definite integral is:
[tex]\mathbf{\int\limits^5_2 {f(x)} \, dx \approx \frac{1}{2}(\sum f(x))}[/tex]
This becomes
[tex]\mathbf{\int\limits^5_2 {f(x)} \, dx \approx \frac{1}{2}(15.625 + 27 + 42.875 + 64+91.125 + 125)}[/tex]
[tex]\mathbf{\int\limits^5_2 {f(x)} \, dx \approx \frac{1}{2} \times 365.625}[/tex]
[tex]\mathbf{\int\limits^5_2 {f(x)} \, dx \approx 182.8125}[/tex]
Hence, the approximation of the area of the region R is 182.8125
Read more about definite integrals at:
https://brainly.com/question/9897385
What is the area of the figure below 13 in length, 11 in width, 29 in and 13 in?
Answer:
B. 533in²
Step-by-step explanation:
Step 1: Find the area of the rectangle
A = lw
A = (29)13
A = 377
Step 2: Find the leg of the triangle
13 + 11 = 24
Step 3: Find the area of the triangle
A = 1/2bh
A = 1/2(24)(13)
A = 12(13)
A = 156
Step 3: Add the areas of the 2 figures together
377 + 156 = 533
Graph the line y=-1/3x+2
Answer:
Graphed below.
Step-by-step explanation:
The slope of the line is -1/3.
The y-intercept is at (0, 2).
The x-intercept is at (6, 0).
Compare the distributions using either the means and standard deviations or the five-number summaries. Justify your choice. Set A Set B The distributions are symmetric, so use the means and standard deviations. The mean for Set A is about 44.6 with standard deviation of about 6.2. The mean for Set B is about 42.8 with standard deviation of about 1.86. While the average low temperatures for the cities are approximately equal, the greater standard deviation for Set B means that Set A’s low temperatures have a greater variability than Set B temperatures. The distributions are symmetric, so use the means and standard deviations. The mean for Set B is about 41.56 with standard deviation of about 6.07. The mean for Set A is about 43.8 with standard deviation of about 14.8. While the average low temperatures for the cities are approximately equal, the greater standard deviation for Set A means that Set A’s low temperatures have a greater variability than Set B temperatures. The distributions are symmetric, so use the means and standard deviations. The mean for Set A is about 44.6 with standard deviation of about 6.4. The mean for Set B is about 41.5 with standard deviation of about 6.7. While the average low temperatures for the cities are approximately equal, the greater standard deviation for Set B means that Set B’s low temperatures have a greater variability than Set A temperatures. The distributions are symmetric, so use the means and standard deviations. The mean for Set A is about 44.6 with standard deviation of about 6.2. The mean for Set B is about 43.8 with standard deviation of about 14.8. While the average low temperatures for the cities are approximately equal, the greater standard deviation for Set B means that Set B’s low temperatures have a greater variability than Set A temperatures.
Answer:
Explained below.
Step-by-step explanation:
The question is:
Compare the distributions using either the means and standard deviations or the five-number summaries. Justify your choice.
Set A: {36, 51, 37, 42, 54, 39, 53, 42, 46, 38, 50, 47}
Set B: {22, 57, 46, 24, 31, 41, 64, 50, 28, 59, 65, 38}
The five-number summary is:
MinimumFirst Quartile Median Third Quartile MaximumThe five-number summary for set A is:
Variable Minimum Q₁ Median Q₃ Maximum
Set A 36.00 38.25 44.00 50.75 54.00
The five-number summary for set B is:
Variable Minimum Q₁ Median Q₃ Maximum
Set B 22.00 28.75 48.00 58.50 65.00
Compute the mean for both the data as follows:
[tex]Mean_{A}=\frac{1}{12}\times [36+51+37+...+47]=44.58\approx 44.6\\\\Mean_{B}=\frac{1}{12}\times [22+57+46+...+38]=44.58\approx 44.6[/tex]
Both the distribution has the same mean.Compare mean and median for the two data:
[tex]Mean_{A}>Median_{A}\\\\Mean_{B}>Median_{B}[/tex]
This implies that set A is positively skewed whereas set B is negatively skewed.Compute the standard deviation for both the set as follows:
[tex]SD_{A}=\sqrt{\frac{1}{12-1}\times [(36-44.6)^{2}+...+(47-44.6)^{2}]}=6.44\approx 6.4\\\\SD_{B}=\sqrt{\frac{1}{12-1}\times [(22-44.6)^{2}+...+(38-44.6)^{2}]}=15.56\approx 15.6[/tex]
The set B has a greater standard deviation that set A. Implying set B has a greater variability that set B.How do you calculate the y-intercept of a line written in Standard Form?
Answer:
y-int = C/B
Step-by-step explanation:
Ax + By = C
y-int = C/B
Answer:
I hope this helps.
Step-by-step explanation:
which inequality represents the statement? the number of new cars(C) a ship carries cant exceed 975.
A. c<975
B. c>975
C. c<(—under<)975
D. c>(—under>)975
"can't exceed 975" means this is the largest value possible for C. So we could have C = 975 or smaller. We write this as [tex]C \le 975[/tex] which is read as "C is less than or equal to 975".
Answer: Choice C. [tex]C \le 975[/tex]Answer:
5
Step-by-step explanation:
Mr.Chang needs to ship 8 boxes of cookies in a packing carton. Each box is a tight rectangular prism 8 inches long, 5 inches wide, and 3 inches high. What is the volume in cubic inches, of each box?
Answer:
120 inches cubed
Step-by-step explanation:
The formula for finding the volume of a rectangular prism is length * width * height.
In this case, 8 inches long is the length, 5 inches is the width, and 3 inches is the height.
So multiplying all of those together gets you 120 inches cubed.
Consider the following. x = 6 sin y , 0 ≤ y ≤ π, x = 0; about y = 4
(a) Set up an integral for the volume V of the solid obtained by rotating the region bounded by the given curve about the specified axis.
(b) Use your calculator to evaluate the integral correct to four decimal places.
Answer:
12pi(8-pi), or
183.158 to third decimal place
Step-by-step explanation:
The geometry is indicated in the attached figure.
A. by integration
We will find the volume of the solid by the method of shells, i.e. we will integrate strips parallel to the axis of rotation to form many thin shells, then integrate to get the sum of all these shells.
For each shell, of thickness dy, we integrate strips of length located at y
L(x) = y(x)
and area
L(x)dy
Each strip is at a distance of (4-y) from
for which the volume of each shell equals
dV = 2*pi*(4-y)*L(x)dy = 2*pi*(4-y)*y(x) dy
The total volume of the solid can be obtained by integrating y from 0 to pi
integral( dV ) from 0 to pi
= integral (2*pi*(4-y)*y(x) dy) for y from 0 to pi
= 12*pi(-sin(y)+y*cos(y)-4*cos(y)) for y from 0 to pi
=12(8-pi)*pi
= 183.158
B. Using Pappus theorem
Pappus theorem simplifies the calculation of volume of revolution by multiplying the area of the rotating region by 2pi times the distance between the centroid and the rotation axis.
Here the area of the figure is A=2*6=12, (2 is the area under the sine curve from 0 to pi), or
A = integral (6sin(x))dx, x from 0 to pi
= 6 cos(x), x from 0 to pi
= 6(1- (-1))
= 12
Distance from centroid to axis of rotation = (4-pi/2)
Volume = 2*pi*A*(4-pi/2) = 2*pi*12*(4-pi/2)
= 12pi(8-pi)
=183.158 as before
Which shapes have the same volume as the given rectangular prism?
What is the answer? ACB ~ EFD
Answer:
y=4solution,
[tex] \frac{ac}{ef} = \frac{cb}{fd} \\ or \: \: \frac{12}{y} = \frac{15}{5} \\ or \: 15 \times y = 12 \times 5( \: cross \: multiplication) \\ or \: 15y = 60 \\ or \: y = \frac{60}{15} \\ y = 4[/tex]
Hope this helps...
Good luck on your assignment..
Answer:
The value of y is 4
Step-by-step explanation:
What is similarity ?
In Euclidean geometry, two objects are similar if they have the same shape, or one has the same shape as the mirror image of the other.
Given,
ΔACB~ΔEFD
The proportional sides are equal.
[tex]\frac{AC}{EF}=\frac{CB}{FD}=\frac{AB}{DE} \\\frac{12}{y}=\frac{15}{5} \\y=12*\frac{5}{15}\\\\ y=4[/tex]
To know more about similarity, similar here
https://brainly.com/question/25087910
#SPJ2
The largest fish ever caught in Lake A weighed 650 pounds. This is 208.2 pounds less than seven times the weight of the largest fish ever caught in Lake B. Find the weight of the largest fish caught in Lake B nts
Answer:
122.6 pounds
Step-by-step explanation:
Let's call the weight of the largest fish from lake A 'x', and the weight of the largest fish from lake B 'y'.
If x is 208.2 pounds less than seven times y, we have that:
[tex]x = 7y - 208.2[/tex]
We know that x is equal 650 pounds, so we can find y:
[tex]650 = 7y - 208.2[/tex]
[tex]7y = 650 + 208.2[/tex]
[tex]7y = 858.2[/tex]
[tex]y = 122.6\ pounds[/tex]
So the weight of the largest fish caught in Lake B is 122.6 pounds
Ten different numbers are written on pieces of paper and thrown into a hat. The sum of all the numbers is 205. What is the probability of selecting four numbers that have a sum greater than 82
Answer:
The probability is 40%
Step-by-step explanation:
a) There are ten pieces of paper with ten numbers
Probability of selecting four pieces of paper = 4/10 or 40%
Probability that the four numbers selected will have a sum greater than 82 = 82/205 = 40%
Therefore, the probability of selecting four numbers that have a sum greater than 82 out of ten numbers totalling 205 is 40%.
b) Probability is the ratio of the number of outcomes favourable for the event to the total number of possible outcomes. In other words, it is a measure of the likelihood of an event (or measure of chance).
LM=9, NR=16, SR=8. Find the perimeter of △SMP.
HURRY FIRST ANSWER I WILL MARK YOU AS BRAINLILIST PROMISE
Answer:
perimeter of △SMP = 25Step-by-step explanation:
The perimeter of the triangle △SMP is the sum of al the sides of the triangle.
Perimeter of △SMP = ||MS|| + ||MP|| + ||SP||
Note that the triangle △LRN, △LSM, △MPN and △SRP are all scalene triangles showing that their sides are different.
Given LM=9, NR=16 and SR=8
NR = NP+PR
Since NP = PR
NR = NP+NP
NR =2NP
NP = NR/2 = 16/2
NP = 8
From △LSM, NP = PR = MS = 8
Also since LM = MN, MN = 9
From △SRP, SR = RP = PS = 9
Also SR = MP = 8
From the equation above, perimeter of △SMP = ||MS|| + ||MP|| + ||SP||
perimeter of △SMP = 8+8+9
perimeter of △SMP = 25
1/4 ÷ 3/8 simplest form
Answer:
2/3
Step-by-step explanation:
divide by a fraction = multiply by reciprocal
1/4 * 8/3
2/3
Answer:
⅔
Step-by-step explanation:
= ¼ ÷ ⅜
= ¼ × ⁸/3
= ⅔
Have a great day !
Please answer this for me!!! 25 points to whoever answers this!!!!!!
Sean, Angelina, and Sharon went to an office supply store. Sean bought 7 pencils, 8 markers, and 7 erasers. His total was $22.00. Angelina spent $19.50 buying 4 pencils, 8 markers, and 6 erasers. Sharon bought 6 pencils, 4 markers, and 7 erasers for $17.75. What is the cost of each item?
Answer:
Pencil = $0.25
Marker = $1.00
Eraser = $1.75
Step-by-step explanation:
Let P denote pencils, M denote markers and E denote erasers. The quantities of each item and total amounts spent by each person can be modeled into the following linear system:
[tex]7P+8M+7E=22\\4P+8M+6E=19.5\\6P+4M+7E=17.75[/tex]
Solving the linear system:
[tex]7P-4P+8M-8M+7E-6E=22-19.5\\3P+E=2.5\\E=2.5-3P \\\\7P+8M+7E-2*(6P+4M+7E)=22-2*17.75\\-5P-7E=-13.5\\-5P*-7*(2.5-3P)=-13.5\\16P=-13.5+17.5\\P=0.25\\E=2.5-0.25*3\\E=1.75\\7P+8M+7E =22\\7*0.25+8M+7*1.75 =22\\8M=8\\M=1[/tex]
The price of each item is:
Pencil = $0.25
Marker = $1.00
Eraser = $1.75
Gregoire sold 24 cars to his friend for $71.76. What was the price per car?
a. $47.76
b. $2.99
c. $17.22
d. $3.25
Answer:
2.99
Step-by-step explanation:
Take the total cost and divide by the number of cards
71.76/24 = 2.99
The cost per car is 2.99
Answer:
b. $2.99.
Step-by-step explanation:
To get the price per car, you get the total price divided by the total number of cars.
That would be 71.26 / 24 = 2.969166667, which is most close to b. $2.99. Those are some cheap cars!
Hope this helps!
If f(x)=8x and g(x)=2x+1, what is (f×g)(x)
Answer:
(f * g)(x) has a final product of 16x² + 8x.
Step-by-step explanation:
When you see (f * g)(x), this means that we are going to be multiply f(x) and g(x) together.
f(x)=8x
g(x)=2x+1
Now, we multiply these terms together.
(8x)(2x + 1)
Use the foil method to multiply.
16x² + 8x
So, the product of these terms is 16x² + 8x.
Select all the correct equations.
Which equations have no real solution but have two complex solutions? PLZ 20 POINTS
Answer:
You did not post the options, but i will try to answer this in a general way.
Because we have two solutions, i know that we are talking about quadratic equations, of the form of:
0 = a*x^2 + b*x + c.
There are two easy ways to see if the solutions of this equation are real or not.
1) look at the graph, if the graph touches the x-axis, then we have real solutions (if the graph does not touch the x-axis, we have complex solutions).
2) look at the determinant.
The determinant of a quadratic equation is:
D = b^2 - 4*a*c.
if D > 0, we have two real solutions.
if D = 0, we have one real solution (or two real solutions that are equal)
if D < 0, we have two complex solutions.
Answer:
This was for 5 points. not 20 my dude. Also the first answer is correct.
Step-by-step explanation:
Which statement best interprets the factor (r+7) in this context?
Answer:
the height of the cylinder is 7 units greater than the radius
Step-by-step explanation:
When you match the forms of the equations ...
[tex]V=\pi r^2(r+7)\\V=\pi r^2h[/tex]
you see that the factor (r+7) corresponds to the height (h) of the cylinder. That is ...
the height of the cylinder is 7 units greater than the radius.
Select the action you would use to solve 4x = 16. Then select the property
that justifies that action.
A. Action: Divide both sides by 4.
B. Property: Multiplication property of equality.
C. Action: Multiply both sides by 4.
D. Property: Division property of equality.
E. Property: Addition property of equality.
O F. Action: Add 4 to both sides.
Answer:
A.
Step-by-step explanation:
Since you are trying to find x, you have to divide both sides by 4 to isolate x and get your answer.
Which feature of a database displays data in a certain sequence, such as alphabetical order? Chart Filter Search Sort
Answer:
data bar
Step-by-step explanation:
Answer:
chart
Step-by-step explanation: