please help :) hope you have a good day

Answer:

i think niether

Explanation:

Answer: A. HNO3

Explanation:

Answer:

An electrolytic cell is a cell that converts electrical energy into chemical energy.

Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell. A typical cell consists of two metallic or electronic conductors held apart and in contact with an electrolyte, which is usually a dissolved or fused ionic compound.

An electrolytic cell is a type of electrochemical cell that uses an external source of electrical energy to force a chemical reaction that would not occur otherwise. A voltage applied between the cell's two electrodes, an anode and a cathode immersed in an electrolyte solution, serves as the external energy source.

Electrons in the form of an electric current are deliberately pumped through the chemicals in the section to induce an oxidation-reduction reaction. An electrolytic cell is a setup used to electrolytically decompose water into hydrogen and oxygen.

Electrochemical cells that generate an electric current are known as voltaic or galvanic cells, whereas those that generate chemical reactions, such as electrolysis, are known as electrolytic cells.

Thus, Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell.

To learn more about electrolytic cell, follow the link;

https://brainly.com/question/4030224

#SPJ5

Answer:

Cells are the smallest living unit of an organism

Answer:

all living things living things have blood cells

Explanation:

this is because robert hooke did not make this apart of the theory

Answer:

A

Explanation:

using

mC∆t

50×4.17×(91-56)

=50×4.17×35

=7297.5

~ 7298 J

Answer:

C10H15N is the chemical equation for methamphetamine

Have a wonderful day :) thanks for the points

Answer:

Expansion: increase in size Contraction: decrease in size

Explanation:

The increase in size of an object on heating is called expansion where as the decrease in size of an object on cooling is called contraction.

Answer:

766ijn

Explanation:

hovibibbunununububububyhybyybybnu

Answer:

snow, hail, rain

Explanation:

precipitation is the transfer of water in any form from the atmosphere to the land or sea surface

Forms of Precipitation. It can be liquid or solid; the main precipitation types are rain, sleet, snow, ice pellets, hail, and drizzle.

There are different forms of precipitation based on atmospheric conditions. Warmer atmospheric conditions might result in rain, drizzle, or hail (if it's a thunderstorm). Colder atmospheric conditions might result in snow, sleet, freezing rain, or ice crystals.

The four main types of precipitation are rain, snow, sleet, and hail. Rain is liquid precipitation that falls during many parts of the year. Hail is associated with thunderstorms and generally falls in warmer temperatures. Snow and sleet are frozen and generally fall in colder temperatures.

Learn more about different forms of precipitation at

https://brainly.com/question/866725

#SPJ2

Answer:

because they react with other gases of atmosphere and pollute the environment

Answer:

6.25gm

half life is 66hrs 11 days is 24*11 then take that and divide by 66 to find out how many time it will have halved and half 50 by that many times

Explanation:

If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.

Molybdenum-99 follows first-order decay.

First-order decay means that for a population of atoms (e.g. radioactive), molecules, or anything else, a constant fraction/unit time is converted to something else.

The half-life (th) of Mo-99 is 66 h.

We will find its rate constant (k) using the following expression.

k = ln2 / th = ln2 / 66 h = 0.011 h⁻¹

Next, we will convert 11 days to hours, knowing that 1 day = 24 h.

11 d × 24 h/1 d = 264 h

If we start with 50 g of Mo-99, we can calculate the remaining mass after 264 h using the following expression.

[tex][Mo] = [Mo]_0 \times e ^{-k \times t} }\\\\[Mo] = 50g \times e ^{-0.011 h^{-1} \times 264 h} } = 2.7 g[/tex]

where,

If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.

Learn more about first-order decay here: https://brainly.com/question/14478152

Answer:

A. 2H₂O₂  → 2H₂O + O₂

Explanation:

If we make a net sum of both reactions, we're left with:

Grouping species:

There is OI⁻ at both sides, so it is eliminated -same goes for the catalyst, I⁻-.

Thus the answer is option A.

Explanation:

1. Pb(CO3)2

Element Number Mass Percet Composition

Oxygen 6 16.00 29.34%

Carbon 2 12.01 7.34%

Lead 1 207.21 63.32%

2. Ga(OH)3

Element Number Mass Percet Composition

Hydrogen 3 1.0079 2.50%

Oxygen. 3 16.00 39.75%

Gallium 1 69.72 57.74%

3. P4O10

Element Number Mass Percet Composition

Oxygen. 10 16.00. 56.36%

Phosphorus. 4 30.97 43.64%

4. Ca3P2

Element Number Mass Percet Composition

Phosphorus 2 30.97 34.00%

Calcium. 3 40.08 66.00%

5. Ti(NO3)3

Element Number Mass Percet Composition

Oxygen. 9 16.00 61.56%

Titanium. 1 47.87 20.47%

Nitrogen. 3 14.01 17.97%

Answer:

Formic acid titrated with ammonia (NH3) as a titrant

Explanation:

We have to look at something very critical here and that is, considering whether the acid/ base is strong or weak.

For a weak acid weak base titration, there is no suitable indicator neither is there any sharp pH range because no sharp change occurs. So, for a weak acid-weak base titration, there is only a very small change in pH at the equivalence point. This makes it impractical to carry out a weak acid- weak base titration.

Formic acid is a weak acid and ammonia is a weak base. Hence, Formic acid titrated with ammonia (NH3) as a titrant is a bad titration

Answer:

S0rRy i d0nT kn0w fRenCh

Answer:

Relative Humidity

Air Temperature

Explanation:

Relative humidity  and air temperature are the factors that creates fog. When the moist and warm air makes contact with the cooler air, water vapor condenses due to low temperature of that region that causes for the formation of fog. So we can say that relative humidity  and air temperature are the main factors for the formation of fog in that region.

Answer:

High Cold High

Explanation:

Answer:

I think its C I'm sorry if I'm wrong good luck guys!

Explanation:

Answer:

C4H4

Explanation:

92.31% of 52.0 g/mol is 48.0012 g/mol

7.69% of 52.0 g/mol is is 3.9988 g/mol

Carbon has a gram-formula mass of about 12, which goes into 48.0012 about 4 times, so there should be 4 atoms of Carbon

Hydrogen has a gram-formula mass of about 1, which goes into 3.9988 about 4 times, so there should also be 4 atoms of hydrogen

Answer:

[tex]T_f=72.5\°C[/tex]

Explanation:

Hello!

In this case, since this a problem in which the cold water is heated by the hot water, we can write:

[tex]Q_{hot}+Q_{cold}=0[/tex]

Thus, by plugging in the mass, specific heat and temperatures, we obtain:

[tex]m_{hot}C_{hot}(T_f-T_{hot})+m_{cold}C_{cold}(T_f-T_{cold})=0[/tex]

Now, we can also write:

[tex]m_{hot}(T_f-T_{hot})+m_{cold}(T_f-T_{cold})=0[/tex]

Then, after applying some algebra, it is possible to obtain:

[tex]T_f=\frac{m_{hot}T_{hot}+m_{cold}T_{cold}}{m_{hot}+m_{cold}}[/tex]

If we plug in, we obtain:

[tex]T_f=\frac{350.0g*95.0\°C+150.0g*20.0\°C}{350.0g+150.0g}[/tex]

[tex]T_f=72.5\°C[/tex]

Best regards!

Answer:

The top layer was the organic layer.

9-fluorenone was most soluble in the organic layer.

Deprotonated chloroanilic acid was most soluble in the aqueous layer.

The bottom layer was the aqueous layer.

The organic layer was a yellow colored solution.

The aqueous layer turned into a pink colored solution.

Answer:

First write the balanced equation for the reaction of HCl with Zn (NOTE: the previous answer did NOT do this and thus obtained an incorrect answer)

Zn + 2HCl ==> ZnCl2 + H2(g)

moles of H2 desired:  PV = nRT

n = PV/RT = (1 atm)(10L)/(0.0821 Latm/Kmol)(298K)

n = 0.409 mole H2 desired

moles Zn needed:

0.409 moles H2 x 1 mole Zn/2 moles HCl = 0.204 moles Zn needed

mass Zn needed = 0.204 moles Zn x 65.4 g/mol = 13.4 g Zn needed (to 3 sig. figs.)

Explanation:people always get this wrong but i got you

Explanation:

tgggghhhhijyyhhjjjjjjjj

Answer:The ocean forms layers because the water has different density throughout. 2. Water with higher density sinks to the bottom while water with lower density sits on the top. ... Low-density water tends to be warmer and less saline, while high-density water is generally cooler and more saline.

Explanation:

Answer:

C is the false one atoms contain chemical bonds

Answer:

C. Atoms contain chemical bonds.

Reason:

Atoms don't have any chemical bonds. Molecules are the particles have chemical bonds.

Answer:

AN ELECTRON HAS THE SMALLEST MASS!

Answer:

A) electron

good luck, i hope this helps :)

Answer:

compound composed of cations and anions the forces of attraction that bind oppositely charged ions together - ionic compound

lowest whole-number ratio of ions in an ionic compound - formula unit

a depiction of the valence electrons as dots around the symbol for an element - electron dot structure

a mixture of two or more elements, at least one of which is a metal - alloy

the attraction of the free-floating valence electrons for the positively charged metal - metallic bond

ions of the halogen atoms - halide ions

the electron(s) in the highest occupied energy level of an atom - valence electrons

the number of ions of opposite charge that surround each ion in a crystal - coordination number

Atoms in a compound tend to have the electron configuration of a noble gas - octet rule

Shows the kinds and numbers of atoms in the smallest representative unit - chemical formula

Explanation:

An ionic compound is composed of oppositely charged ions held together in a crystal lattice. The lowest whole-number ratio of ions in an ionic compound is known as the formula unit.  The number of ions of opposite charge that surround each ion in a crystal is called the coordination number. Ions of the halogen atoms  are negatively charged and are called halide ions

Elements are composed of atoms, the electron(s) in the highest occupied energy level of an atom are called valence electrons. In metals, the attraction of the free-floating valence electrons for the positively charged metal is called the metallic bond. For atoms of elements, a depiction of the valence electrons as dots around the symbol for an element is called the electron dot structure or Lewis structure.

A combination of elements may be a compound or an alloy. An alloy usually contains at least one metal. For compounds, the chemical formula Shows the kinds and numbers of atoms in the smallest representative unit. Atoms form compounds because atoms in a compound tend to have the electron configuration of a noble gas this is the octet rule.

The correct match of the given statement are 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.

Ionic compounds are made up of oppositely charged ions that are kept together in a crystal lattice. The formula unit is the lowest whole-number ratio of ions in an ionic compound.  

The coordination number is the number of ions with opposite charges that surround each ion in a crystal. Halide ions are halogen atom ions that are negatively charged.

Elements are made up of atoms, and the electron(s) in the atom's highest occupied energy level are known as valence electrons. The metallic bond refers to the attraction of free-floating valence electrons to positively charged metals in metals.

The electron dot structure or Lewis structure is a representation of the valence electrons as dots around the symbol for an element for atoms.

A compound or an alloy is a mixture of components. A metal is frequently present in an alloy.

The chemical formula is used for compounds. The types and numbers of atoms in the smallest representative unit are displayed.

The octet rule states that atoms in a compound tend to have the electron configuration of a noble gas.

Therefore, the correct matches are: 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.

Learn more about ionic compound, here:

https://brainly.com/question/30420333

#SPJ6

The given question is incomplete, so the most probable complete question is,

Match the correct statement with their appropriate terms:

Answer:

4.16 * 10²⁴ particles

Explanation:

1. We convert from grams to moles

4 g NaCl / 58 g of NaCl = 0.0689655172 moles

-> 0.0690 moles

2. Now we will convert from moles to particles by multiplying by avogadro's number..

0.0690 * 6.022 *10²³ = 4.15518 * 10²⁴ particles or 4.16 * 10²⁴ particles

Answer:

it can tell and show what pathogen is in you as well what type and mutation so then your body can fight back and remember the genetic dna so then you will be immune in some way.

Explanation:

Question;

How does a fever aid an immune response?

Answer:

One type of immune cell jumps into the fray after body temperature rises, according to experiments in mice. A fever fights infection by helping immune cells to crawl along blood-vessel walls to attack invading microbes