Answer:
Explanation:
Potential energy
What's the molar mass of CoCl
Answer:129.839 g/mol
Explanation:
A 12 gram piece of Cu at 475 oC is placed in contact with a 15 gram piece of Cr at 265 oC.
Assume the two pieces of metal are the system and that there is no heat exchange between system and surrounding.
What is the final temperature of the two pieces of metal expressed in degree C?
Answer:
349.22°C
Explanation:
Let the final temperature of the two pieces of metal be x.
Now, the warmer metal which is C u reduces from 475°C to x. Thus Δt for C u is; Δt1 = 475 - x.
The cooler metal Cr increases in temperature from 265°C to x. Thus, it's change in temperature is Δt for Cr is; Δt2 = x - 265.
Now from conservation of energy, the amount of energy leaving the C u metal is equal to the amount of energy entering the Cr metal.
Thus;
q_lost = q_gain
Where;
q_lost = m1•c1•Δt1
q_gained = m2•c2•Δt2
Now, c1 & c2 are the specific heat capacity of C u and Cr respectively.
From online tables, c1 = 0.385 J/g°C and c2 = 0.46 J/g°C
We are given;
m1 = 12g and m2 = 15g
Thus;
12 × 0.385 × (475 - x) = 15 × 0.46 × (x - 265)
2194.5 - 4.62x = 6.9x - 1828.5
6.9x + 4.62x = 2194.5 + 1828.5
11.52x = 4023
x = 4023/11.52
x = 349.22°C
Whenever the same two elements form more than one
compound, the different masses of one element that combine
with the same mass of the other element are in the ratio of
small whole numbers.
TRUE
FALSE
Answer:
The answer is true
Explanation: Because The law of multiple proportions states that when two elements react to form more than one compound, a fixed mass of one element will react with masses of the other element in a ratio of small, whole numbers.
A rock rolls down a hill. Which form of energy is this an example of?
Chemical
Electrical
Mechanical
Thermal
Answer:
Mechanical
Explanation:
chemical
Explanation:
I took test 2020
I need the answer multiple choice
Answer:
it's answer is
element of an atom ✌️
What mass in grams of MgSO4 is required to make 59.3 mL of 2.68 M
solution?
Answer:
Approximately [tex]19.1\; \rm g[/tex].
Explanation:
Number of moles of formula units of magnesium sulfate required to make the solutionThe unit of concentration in this question is "[tex]\rm M[/tex]". That's equivalent to "[tex]\rm mol \cdot L^{-1}[/tex]" (moles per liter.) In other words:
[tex]c(\mathrm{MgSO_4}) = 2.68\; \rm M = 2.68\; \rm mol \cdot L^{-1}[/tex].
However, the unit of the volume of this solution is in milliliters. Convert that unit to liters:
[tex]\displaystyle V = 59.3\; \rm mL = 59.3 \; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.0593\; \rm L[/tex].
Calculate the number of moles of [tex]\rm MgSO_4[/tex] formula units required to make this solution:
[tex]\begin{aligned}n(\rm MgSO_4) &= c \cdot V \\ &= 2.68 \; \rm mol \cdot L^{-1} \times 0.0593\; \rm L \approx 0.159\; \rm mol \end{aligned}[/tex].
Mass of magnesium sulfate in the solutionLook up the relative atomic mass data of [tex]\rm Mg[/tex], [tex]\rm S[/tex], and [tex]\rm O[/tex] on a modern periodic table:
[tex]\rm Mg[/tex]: [tex]24.305[/tex].[tex]\rm S[/tex]: [tex]\rm 32.06[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].Calculate the formula mass of [tex]\rm MgSO_4[/tex] using these values:
[tex]M(\mathrm{MgSO_4}) = 24.305 + 32.06 + 4 \times 15.999 \approx 120.361\; \rm g \cdot mol^{-1}[/tex].
Using this formula mass, calculate the mass of that (approximately) [tex]0.159\; \rm mol[/tex] of [tex]\rm MgSO_4[/tex] formula units:
[tex]\begin{aligned}m(\mathrm{MgSO_4}) &= n \cdot M \\&\approx 0.159 \; \rm mol \times 120.361 \; \rm g \cdot mol^{-1} \approx 19.1\; \rm g\end{aligned}[/tex].
Therefore, the mass of [tex]\rm MgSO_4[/tex] required to make this solution would be approximately [tex]19.1\; \rm g[/tex].
Please help
It’s super quick
Answer:
1. a
Explanation:
2. c
Answer:
1 is A number two is C
Which of the following statements is true regarding both theories and laws?
A: Change over time
B: Cannot be proven
C: Require consensus
D: Supported by observations
Answer:
D. Supported by observations
Explanation:
Because theories change over time, they both need to be proven, they do not go off of consensus, but they do need to be supported by observations.
HOPE IT HELPS❣️
How and why was the periodic table set up?
HELP
What type of bond is formed between the carbon and either oxygen in CO2?
A) Single
B) Double
C) Triple
An atom has 8 protons, 8 neutrons and 9 electrons. is thus a cation, anion, or neutral atom?
Answer:
It is an Anion because there are more electrons than protons making it negative
Which of the following elements has 3 electrons in the 2p sublevel?
O A. O
O B. C
O C. B
O DN
Answer:
the answer is D. N
AP3X
According to electronic configuration, there are 3 electrons in the 2p sublevel ,hence the correct option is D.
Electronic configuration is defined as the distribution of electrons that are present in an atom or molecule in an atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is important for understanding the structure of periodic table. It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions so as to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in their ground state and hence are said to be stable.
Thus, the correct option is D.
Learn more about electronic configuration,here:
https://brainly.com/question/29184975
#SPJ4
which body system carries oxygen, glucose and amino acids to all the cells of the body?
Answer:
Blood
Explanation:
This flows through the body so it gives it all over.
The atom is one of the basic units of matter. Which part of the atom mostly determines the size of the atom?
a.Electrons
b.Nucleus
c.Neutrons
d.Protons
Answer:
Atomic size is the distance from the nucleus to the valence shell where the valence electrons are located. The separation that occurs because electrons have the same charge. The number of protons in the nucleus. The core electrons in an atom interfere with the attraction of the nucleus for the outermost electrons.
Explanation:
That would be B I believe, but please correct me if I'm wrong.
why saturated fatty acid can’t create kink ?
C is the element symbol for which element?
a. Carbon
b. Cadmium
c. Celenium
d. Chlorine
Answer:
A) Carbon
Explanation:
the others are wrong its A
Answer:
A) carbon
Explanation:
carbon or simply c has an atomic number of 6 and it has an atomic mass of 12.01 amu. it belongs to group 4a
If the stack of bricks on the right has a mass of 240 kg, approximately what is the mass of the stack of bricks on the left?
A.
2400 kg
B.
720 kg
C.
320 kg
D.
480 kg
Answer:
720
Explanation: study island
Answer:
720
Explanation:
17. Which is a fat-soluble vitamin?
O vitamin B
O vitamin C
O vitamin A
______ bonds form when 2 metal atoms share electrons.
Calculate the time required for a constant current of 0.868 A to deposit 0.387 g of Tl(III) as Tl(s) on a cathode.
Answer:
632.7 secs
Explanation:
Equation of the reaction:
Tl^3+ + 3e ------> Tl
If 1F = 96500 C
Q= It
Where;
I= current
t= time
3× 96500 C deposited 204 g of Tl
0.868 × t deposited 0.387 g of Tl
3 × 96500 × 0.387 = 204 × 0.868 × t
t= 3 × 96500 × 0.387/ 204 × 0.868
t= 632.7 secs
The time required for a constant current of 0.868 A to deposit 0.387 g of Tl(III) as Tl(s) is 2689 s
We'll begin by calculating the quantity of electricity needed to deposit 0.387 g of Ti
Ti³⁺ + 3e —> Ti
Recall:
1 mole of Ti = 48 g
1 electron (e) = 96500 C
Thus,
3 electrons = 3 × 96500 = 289500 C
From the balanced equation above,
48 g of Ti was deposited by 289500 C of electricity.
Therefore,
0.387 g of Ti will be deposited by = (0.387 × 289500) / 48 = 2334.09375 C of electricity
Finally, we shall determine the time required.Quantity of electricity (Q) = 2334.09375 C
Current (I) = 0.868 A
Time (t) =?t = Q / I
t = 2334.09375 / 0.868
t = 2689 sTherefore, the time required for the reaction is 2689 s
Learn more: https://brainly.com/question/17135793
which type of rection has the general formuial ab+cd
The net force on a vehicle that is accelerating at a rate of 1.5m/s^2 is 1,800 newtons. What is the mass of the vehicle to the nearest kilogram?
Answer:
Explanation:
Net force F = 1800 N
acceleration a = 1.5 m /s²
mass = m
mass = force / acceleration
= 1800 / 1.5
m = 1200 kg
The mass of the vehicle to the nearest kilogram is 1200 Kg
The force acting on an object is defined by the following equation
Force (F) = mass (m) × Acceleration (a)
F = ma
With the above formula, we can obtain the mass of the vehicle as follow:
Force (F) = 1800 N
Acceleration (a) = 1.5 m/s²
Mass (m) =?[tex]m = \frac{F}{a} \\ \\ m = \frac{1800}{1.5} \\ \\ m = 1200 \: Kg[/tex]
Therefore, the mass of the vehicle is 1200 Kg
Learn more on force and acceleration: https://brainly.com/question/14486244
The critical resolved shear stress for a metal is 35 MPa. Determine the maximum possible yield strength (in MPa) for a single crystal of this metal that is pulled in tension.
Answer:
The maximum possible yield strength for a single crystal is 70 MPa.
Explanation:
To find the maximum possible yield strength for a single crystal we need to use the following equation:
[tex]\sigma_{y} = \frac{\tau_{CRSS}}{m_{max}}[/tex]
Where:
[tex]m_{max}[/tex] is the maximum value for Schmid factor
[tex]\tau_{CRSS}[/tex] is the critical resolved shear stress = 35 MPa
[tex] \sigma_{y}[/tex] is the yield strength =?
The Schmid factor is given by:
[tex]m = cos(\phi)cos(\lambda)[/tex]
And its maximum value is obtained when λ = 45° and Φ = 45°, so:
[tex] m = cos(45)cos(45) = 0.5 [/tex]
Finally, the maximum possible yield strength is:
[tex]\sigma_{y} = \frac{\tau_{CRSS}}{m_{max}} = \frac{35 MPa}{0.5} = 70 MPa[/tex]
Therefore, the maximum possible yield strength for a single crystal is 70 MPa.
I hope it helps you!
TRUE OR FALSE? Alloys are used more than pure metals because they are generally softer and less likely to react with air or water. WILL GIVE BRAINLIEST
Answer:
False
Explanation:
They’re used cause they’re generally harder than pure metals
Alloys are used much more than pure metals because they are generally stronger and less likely to react with air or water...
So I would say false
please help 10 points asap
Answer:
opposite
Explanation:
Answer:
opposite
Explanation:
cu9c9ucoucucpucfpufupfpucupvpjvpucu
Will give brainliest, Look at the graph above. Compare it to the periodic table. What do you notice about the location on the periodic table of the elements that represent the high points
Answer:
We can see that the atomic radius decreases across every row.
Explanation:
I will comment more below.
The elements that represent the highest points on the graph are all elements of group 1 and occur at the head of the period to which they belong.
The periodic table is an arrangement of elements in groups and periods. The elements in the same group have the same number of valence electrons while the elements in the same period have the same number of shells.
Looking at the graph, we can see that the high points in the graph all correspond to the group 1 elements; sodium, potassium, rubidium and cesium.The have the highest atomic radii in the period. Atomic radii increases down the group but decreases across the period. Remember that these elements are at the head of the period to which they belong hence they have the highest atomic radii.
Learn more: https://brainly.com/question/9352088
Which one of the following is NOT a proper unit for frequency? *
m·s–1
Hz
s–1
1/s
Answer:
m*s⁻¹.
Explanation:
Hello!
In this case, since the frequency measures how repetitive an event is per unit of time, for instance the laps a car drives every 5 minutes or something similar, we can infer it has units of event/time; in such a way, the unit m*s⁻¹ is not a proper unit of frequency because it is a proper unit of velocity which is the distance traveled per unit of time.
In such a way, Hz (hertz), s⁻¹ and 1/s are possible ways frequency can be represented.
Best regards!
Which of the following increases with increasing atomic
number down a group?
Answer:
The number of energy levels increases as you move down a group as the number of electrons increases. Each subsequent energy level is further from the nucleus than the last. ... The outermost electrons are repelled by the inner shell electrons (Screening effect) and hence, the atomic size increases.
Explanation:Increase in atomic size
TRUE OR FALSE QUESTIONS
1) ___________________________ The physical properties of metals include
dullness, malleability, ductility, and conductivity.
2) ___________________________ Neutrons have a negative charge.
3) ___________________________Mendeleev was known as the father of the
periodic table.
1: FALSE The physical properties of metals include shininess, malleability, ductility, and conductivity.
2: FALSE Neutrons are the particles in an atom that have a neutral charge. They aren't positive like protons. They aren't negative like electrons.
3: TRUE Dmitri Ivanovich Mendeleev was a Russian chemist and inventor. He is best remembered for formulating the Periodic Law and creating a farsighted version of the periodic table of elements. He is also known as the "father of the periodic table"
Answer:
1.T, 2.F., 3.T
Explanation:
2 is false because electrons have a negative charge neutrons have no charge
Which of these solutions are basic at 25 °C ? A:[OH−]=2.53×10−7 M B:[H3O+]=9.99×10−9 M C:[H3O+]=6.31×10−4 M
Answer: frfg6
Explanation: 655tyyt