One pot has a water height of 8cm. Calculate the water pressure at the bottom of the pot. They give g = 10N / kg p = 1000kg / m3

Explanation:

.Flame retar,dant plastic additi,ves are compounds added to plastics and other materials to inhibit, suppress or de,lay combustion. These compounds are useful in impending burning in the ign,ition phase of fire. They do not prevent char,ring or melting nor do they increase the heat resistance of a material

Answer:

gsg

Explanation:

The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.

The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.

In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.

The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.

Find more on electrostatic repulsion:

https://brainly.com/question/24013868

#SPJ2

Answer:

a) v₂ = 4.2 m/s

b) v₂ = 5 m/s

Explanation:

a)

We will use the law of conservation of momentum here:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = m₂ = mass of bowling pin = 1.8 kg

u₁ = speed of first pin before collsion = 5 m/s

u₂ = speed of second pin before collsion = 0 m/s

v₁ = speed of first pin after collsion = 0.8 m/s

v₂ = speed of second after before collsion = ?

Therefore,

[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0.8\ m/s)+(1.8\ kg)(v_2)\\v_2 = 5\ m/s - 0.8\ m/s[/tex]

v₂ = 4.2 m/s

b)

We will use the law of conservation of momentum here:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = m₂ = mass of bowling pin = 1.8 kg

u₁ = speed of first pin before collsion = 5 m/s

u₂ = speed of second pin before collsion = 0 m/s

v₁ = speed of first pin after collsion = 0 m/s

v₂ = speed of second after before collsion = ?

Therefore,

[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0\ m/s)+(1.8\ kg)(v_2)[/tex]

v₂ = 5 m/s

Answer:

The parent nucleus splits into lighter daughter elements

Explanation:

Nuclear fission involves the splitting of nucleus of a lighter element with smaller particles

Answer:

   i = 1.09 10⁴ A

Explanation:

For this exercise we will look for the resistance of the wire

          R = ρ L / a

the area of ​​the wire is

          a =ππ r² = π πd² / 4

we substitute

         R = ρ L 4 / π d²

          R = 1.72 10⁻⁸   20  4/π 8 10⁻⁴

         R = 5.47 10⁻⁴ Ω

to calculate the current we use ohm's law

           V = R i

            i = V / R

            i = 6 / 5.47 10⁻⁴

            i = 1.09 10⁴ A

Answer: same force in opposite direction.

Explanation: Charges of opposite sign attracts each other and charges with same sign repel each other. Because only sign of negative charge changes, and absolute value of charge remains same, value of force is same but is in opposite direction.

Answer:

A) same force, but in the opposite direction

Explanation:

he's right

Answer:

This is based upon the fact that meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids

Explanation:

Iron meteorites are interpreted as deriving from the cooled metallic core of a larger asteroid , because meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids that are located outside the planet but found their way into our planet .

Answer:

391.5 J

Explanation:

The amount of work done can be calculated using the formula:

Looking at the formula, we can see that the mass of the object does not affect the work done on it.

Substitute the force applied and the displacement of the object into the equation.

The amount of work done on the object is 391.5 J in order to move it 4.5 meters with an applied force of 87 Newtons.

Mass doesn't matter on amount of work done .We can calculate amount of work done through Force and Displacement

[tex]\boxed{\sf W=Fd}[/tex]

[tex]\\ \sf\longmapsto Work\:Done=87(4.5)[/tex]

[tex]\\ \sf\longmapsto Work\:done=391.5J[/tex]

Answer:

It’s like medium uk

Explanation:

The size of electron charge is estimated to be 1.6 × 10-¹⁹

Answer:Due to change in direction

Explanation:

Given

Initially train has traveled a 100 km in North and after exchanging some railroad cars, it traveled 100 in south.

The velocity of the train changes as it direction of motion changes. Velocity is the vector quantity which require direction and magnitude for its reperesentation.

Answer:

The answer to your question is given below.

Explanation:

The energy and frequency of a wave are related by the following equation:

E = hf

Where

E => is the energy.

h => is the Planck's constant.

f => is the frequency

From the formula i.e

E = hf

The energy is directly proportional to the frequency. Thus, an increase in the frequency of the wave will lead to an increase in the energy and a decrease in the frequency of the wave will lead to a decrease in the energy.

Considering the question given above, if the frequency of the wave is decreased, then the energy of the wave will also decrease.

Answer:

v1= 12.5miles, t= -7.25m, a= 0

v= 1/2at^2

v= 1/2×

Answer:

Linear magnification = 1/3

Explanation:

Given:

Convex mirror

Object's distance from pole = 2f

Find:

Linear magnification

Computation:

Object distance, u = −2f

So,

1/v + 1/u = 1/f

1/v + 1/(-2f) = 1/f

1/v = 1/f + 1/2f

BY taking LCM

1/v = 3 / 2f

v = 2f / 3

Magnification, M = -v / u

So,

Magnification, M = (2f / 3) / 2f

Magnification, M = 2f / 6f

Magnification, M = 2 / 6

Linear magnification = 1/3

Answer:

C. mg sin(θ)

Explanation:

The plane is incline and the only force acting in the object is the gravity, so you multiply mg per sin(θ) because sin(θ) gave you the part of the gravity acting in the horizontal direction parallel with the inclined surface

The expression shows the net force on the object along the surface of the incline is mg sin(θ).  The correct option is C.

When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.

An object of mass m slides down an incline with angle (θ).

The plane is incline and the only force acting in the object is the gravity, The weight or gravity acting in the horizontal direction parallel with the inclined surface is  mg sin(θ).

Thus, the correct option is C.

Learn more about net force.

https://brainly.com/question/18031889

#SPJ2

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

Answer:

here's an explanation but not the answer

please kindly send No or Yes understand.

Explanation:

A 10-N force is applied to push a block across a friction free surface for a displacement of 5.0 m to the right.

See Answer

See Answer

A 10-N frictional force slows a moving block to a stop after a displacement of 5.0 m to the right.

Answer:

The question above would be written again but this time with options attached to it for comprehension sake:

Which of the following best describes the formation of surf?

A.  Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break.

B. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break.

C. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break.

D. As waves enter shallow water, the distance between wave crests (wavelength) shortens, increasing the tendency to break.

The correct answer is option C (A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break).

Explanation:

Surf could mean crashing waves or breaking waves. Generally, the wave speed is constant in the same medium, however, the wave speed decreases as it enters shallow water which is largely due to the water depth which is relatively small, especially when it encounters the bottom of the shallow water. While the top of the wave overtakes the bottom of the wave, making sure the top of the wave continues at its previous speed.

Answer:

a.  9.99625 cm b. 68 °C

Explanation:

(a) What is the length of the rod at the freezing point of water (0 0C)?

Before we find the length of the rod, we need to find the coefficient of linear expansion, α = (L - L₀)/[L₀(T - T₀)] where L₀ = length of rod at temperature T₀ = 10.0 cm, T₀ = 20 °C, L = length of rod at temperature T = 10.015 cm and T = 100 °C

Substituting the values of the variables into the equation, we have

α = (L - L₀)/[L₀(T - T₀)]

α = (10.015 cm - 10.0 cm)/[10.0 cm(100 °C - 20 °C)]

α = 0.015 cm/[10.0 cm × 80 °C]

α = 0.015 cm/[800.0 cm °C]

α = 0.00001875 /°C

We now find the length L₁ at T₁ = 0 °C from

L₁ = L₀(1 + α(T₁ - T₀))

So, substituting the values of the variables into the equation, we have

L₁ = L₀(1 + α(T₁ - T₀))

L₁ = 10.0 cm[1 +  0.00001875 /°C(0° C - 20 °C)]

L₁ = 10.0 cm[1 +  0.00001875 /°C × -20° C]

L₁ = 10.0 cm[1 - 0.000375]

L₁ = 10.0 cm[0.999625]

L₁ = 9.99625 cm

(b) What is the temperature if the length of the rod is 10.009 cm?

With length L₃ = 10.009 cm at temperature T₃, using

L₃ = L₀(1 + α(T₃ - T₀))

making T₃ subject of the formula, we have

L₃/L₀ = 1 + α(T₃ - T₀)

L₃/L₀ - 1 = α(T₃ - T₀)

T₃ - T₀ = (L₃/L₀ - 1)/α

T₃ = T₀ + (L₃/L₀ - 1)/α

substituting the values of the variables into the equation, we have

T₃ = 20 °C + (10.009 cm/10.0 cm - 1)/0.00001875 /°C

T₃ = 20 °C + (1.0009 - 1)/0.00001875 /°C

T₃ = 20 °C + 0.0009/0.00001875 /°C

T₃ = 20 °C + 48 °C

T₃ = 68 °C

Answer:

Potential difference, V = -0.000224 Volts

Explanation:

Given the following data;

Quantity of charge = 6.93*10-4 C

Energy = -3.09 J

To find the electric potential V at that point?

Mathematically, the energy transferred per unit of charge is given by the formula;

E = QV

Where:

E is the energy

Q is the quantity of charge

V is the potential difference.

Substituting into the formula, we have;

[tex] -3.09 = 6.93*10^{-4} * V [/tex]

[tex] V = \frac {6.93*10^{-4}}{-3.09} [/tex]

Potential difference, V = -0.000224 Volts

Answer:

a) 3.9 x 10⁻⁵ kg

Explanation:

The amount of mass required to produce the energy can be given by Einstein's formula:

[tex]E = mc^2\\\\m = \frac{E}{c^2}[/tex]

where,

m = mass required = ?

E = Energy produced = 3.5 x 10¹² J

c = speed of light = 3 x 10⁸ m/s

Therefore,

[tex]m = \frac{3.5\ x\ 10^{12}\ J}{(3\ x\ 10^8\ m/s)^2} \\\\m = 3.9\ x\ 10^{-5}\ kg[/tex]

Hence, the correct option is:

a) 3.9 x 10⁻⁵ kg

Answer:

The uniy which is accepted all over the world is called SI unit.

Explanation:

The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.

I = 4 A

Explanation:

From Ohm's law, the voltage is given by

V = IR

or

I = V/R = (80 V)/(20 ohms)

= 4 A

Answer:

C. Visible light

Explanation:

Visible light is responsible for the colors of objects.

Hope it will help :)❤

Answer:

The initial speed of the second arrow is 33.8 m/s.

Explanation:

initial speed of first arrow, u = 34 m/s

Let the initial height of the second arrow is h.

Let they both reaches at maximum height H.

Let the time taken by the first arrow is t and the second arrow is t - 0.0204

Let the initial speed of the second arrow is u'.

Use first equation of motion for the first arrow.

v = u - gt

0 = u - gt

34 = gt ..... (1)

For the second arrow

v =u' - g (t - 0.0204)

0 = u' - gt + 9.8 x 0.0204

u' = 34 - 0.1999 = 33.8 m/s

Answer:

Increases

Explanation:

In the Compton scattering experiment with x-rays,

The change in operation

[tex]\Delta \lambda = \frac{h}{m_oc} [1-cos\theta][/tex]

Now rest being constant, as \theta increases, cos\theta decreases

Hence, The change in wavelength will increase with the increase in \theta.

Hence, wavelength increases with an increase in the angle of scatttering.

Answer:

small amounts of mass are converted to large amounts of energy

Explanation:

According to the mass-energy equivalence, which Albert Einstein initially proposed as a general principle. It was revealed that mass and energy are connected and that a "small amount of mass can be converted into enormous amounts of energy."

Using the formula E=mc^2. This means Energy equals mass times the speed of light squared.

Hence, it is true that "small amounts of mass are converted to large amounts of energy."

Answer: hello the options related to your question is missing attached below are the missing options

answer : The molecules with the highest temperature will bounce off their neighbors, losing energy to them and so on until the system is at a new equilibrium with the piston moved out  ( option B )

Explanation:

What best describes the situation of what will happen next as explained in the question is in Option B

Because molecules with higher temperatures will always posses higher kinetic energy and they will collide more frequently with surrounding molecules passing on their energy in the process until the energy gets to the molecules closest to the piston. The molecules closest to the piston will then hit the piston until a new equilibrium is achieved

Answer:

b. Because the southern pole of the Earth's magnet is in the north.

Explanation:

This is very weird to think about but Earth's southern magnetic pole is in Earth's geographic north. So when compass points north, it is actually getting attracted to the southern magnetic pole (that is actually located in the north direction- geographic location- in earth).

Answer:

=>8x+9x+5+3

=>8x+9x+5+3=>17x+8