The kinetics of first order governs nuclear decay. The nuclide's rate constant is 0.0803 min1, and it decays from 12.9 g to 2.04 g in 23.0 minutes.
By nuclide, what do you mean?This number of protons, neutron, and the activity state of a nucleus define a species of atom known as a nuclide, also known as a nuclear species. Thus, a nuclide is identified by its atomic number and mass number (A) (Z).
Nuclide example: What is it?A kind of atom known as a nuclide is one that has a particular number of proton and neutrons with in nucleus, such as carbon-13, which has 6 protons & 7 neutrons. Radionuclides connected to the carrier release ionizing radiation that kills cancer cells.
To know more about Nuclide visit:
https://brainly.com/question/9826865
#SPJ4
a sample of vitamin a, c20h30o, contains 4.0 x 1024 atoms of carbon. how many moles of vitamin a does it represent?
A sample of vitamin a, C20H30O, contains 4.0 x 1024 atoms of carbon. It represents 6.64 mol of vitamin.
A mole is defined as the quantity of a material that contains precisely the Avogadro number of the substance's "elementary entities."
Every material has the same amount of atoms or other particles in a mole. The mole has the following relationship to an element's mass: One mole of carbon-12 atoms weighs 12 grams and has 6.02214076 x 10^23 atoms.The mole concept helps in putting quantitative data about what transpires in a chemical equation on a macroscopic scale.
Number of carbon atoms in the given sample = 4 x 10^24 atoms.
We know that 6.022 x 10^23 carbon atoms = 1 mole (avagardo constant)
So, moles in 4 x 10^24 carbon atoms will be = 4 x 10^24/ 6.022 x 10^23
= 6.64 mol.
Therefore, no of moles present is 6.64 mol.
To learn more about Mole concept visit :
https://brainly.com/question/14475422
#SPJ4
which of the following isomers is expected to undergo an sn2 reaction most rapidly upon treatment with naoh?
The following isomers is expected to undergo an SN2 reaction most rapidly upon treatment with NaOH is primary alkyl halide.
The SN2 reaction is the bimolecular reaction. the primary alkyl halides undergoes SN2 reaction than the secondary alkyl halide and the tertiary alkyl halide. the reason is because of the less steric hindrance experienced by the nucleophile that is approaching to word compound. the secondary and the tertiary alkyl halides are slower than the primary one. the secondary alkyl halide and the tertiary alkyl halide experienced more steric hindrance as compared to the primary alkyl halide.
Thus, the primary alkyl halide under goes more readily an SN2 reaction.
To learn more about SN2 reaction here
https://brainly.com/question/29341964
#SPJ4
indentify the three decomposition reactions. how did you determine the calssification of these chemicals reactions
Thermolysis, photolysis, and electrolysis are three different forms of breakdown reactions. A single source was cooked to yield two or more objects in each instance (decomposition).
Which reaction is decomposition?Decomposition reactions happen when complex chemical entities split apart into smaller components. Decomposition reactions often demand energy input. For instance, the thermal breakdown of potassium hydroxide (KClO3) is a typical technique used during laboratories to generate oxygen gas.
What kind of decomposition best illustrates this?Below is a typical illustration of a thermal breakdown reaction. Calcite breaks down into calcareous dioxide and atmospheric co2 when heated. The production of quick lime, a crucial component in numerous industries, uses this procedure.
To know more about Decomposition reaction visit:
https://brainly.com/question/16987748
#SPJ4
what is the percent yield of hcl if 42.0 g of hcl are produced from the reaction of 62.0 g of pcl3? use percent yield equals startfraction actual yield over theoretical yield endfraction times 100.. 28.4% 72.8% 85.0% 93.5%
The percent yield of HCl is 85.0%.
In chemistry, yield, also referred to as reaction yield, is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.
%yield = (actual yield/theoretical yield) x 100
The presence of impurities lowers the actual yield, which lowers the percentage yield. The purity of the reactants influences the percentage yield. Highly pure reactants tend to increase actual yield and, as a result, percentage yield.
A percentage yield greater than 100 percent is only possible if the product is contaminated with impurities or if all of the solvent from the reaction mixture has not been dried off.
To know more about percent yield visit :
https://brainly.com/question/26430784
#SPJ4
a major component of gasoline is octane . when liquid octane is burned in air it reacts with oxygen gas to produce carbon dioxide gas and water vapor. calculate the moles of water produced by the reaction of 1.70 of oxygen. be sure your answer has a unit symbol, if necessary, and round it to significant digits.
The number of moles of carbon dioxide produced by the reaction of 0.085 moles of oxygen is 0.1 moles.
Solution:
2C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
25 moles of O₂ reacted to produce 16 moles of CO₂.
Therefore,
0.085 mole of O₂ will react to produce = [tex]\frac{0.085*16}{25}[/tex] = 0.1 mole of CO₂.
Thus, the number of moles of CO₂ produced from the reaction is 0.1 mole.
When liquid octane is burned in the air it reacts with oxygen gas to produce carbon dioxide gas and water vapor. When octane burns in the air it chemically reacts with oxygen gas to produce carbon dioxide and water.
Combustion reactions of hydrocarbons release thermal energy and are an example of exothermic reactions. Gasoline burns and reacts with oxygen in the atmosphere to produce light and heat, converting carbon-based molecules into carbon dioxide gas and water vapor.
Learn more about Carbon dioxide gas here:- https://brainly.com/question/23865234
#SPJ4
consider the following voltaic cell which of the following statements is false? the al electrode is the anode the al electrode will tose mass the pt electrode is the cathode the pt electrode will gain mass electrons flow from the al electrode to the pt
According to the provided voltaic cell equation, it is untrue that the al electrode serves as the anode.
An electrode is a conductor of electricity used to make electrical contact with a nonmetallic component of a circuit. Depending on the type of battery, electrodes can be made of a range of materials and are a vital component. A conductor used to make electrical contact with a circuit's nonmetallic components is called an electrode. Common applications for electrodes include electrochemical cells, semiconductors like diodes, and medical equipment.
The voltaic cell, which bears the names of scientists Luigi Galvani and Alessandro Volta, is an electrochemical device that produces an electric current through uninhibited oxidation-reduction reactions. A voltaic cell is an electrochemical device that harnesses the power of a chemical process to generate electricity. the essential elements of a solar cell.
learn more about voltaic cell here
https://brainly.com/question/22170690
#SPJ4
how long (in hours) must a current of 2.32 amps be passed to produce 10.3 g of copper metal from a solution of aqueous copper(ii) chloride?
In 3.75 hours a current of 2.32 amps be passed to produce 10.3 g of copper metal from a solution of aqueous copper(ii) chloride.
According to Faraday's first law, the amount of chemical reaction that takes place at any electrode during electrolysis is proportional to the amount of electricity that is passed through the electrolyte.
According to Faraday's first law-
w= zit
w= (E/F) it
w- weight of copper , which is 10.3 grams according to the given question.
i- current = 2.32 ampere
t- time =?
E- equivalent weight of copper = atomic weight/ charge
⇒ 63.5/ 2 = 31.7 g.
F- Faradays constant= 96500C
∴10.3 = (31.7/96500) x 2.32 x t
⇒ t= 13517 sec
⇒t= 13517 / 60x60
∴t= 3.75 hours
Hence, In 3.75 hours a current of 2.32 amps be passed to produce 10.3 g of copper metal from a solution of aqueous copper(ii) chloride.
To learn more about Faraday's law refer-https://brainly.com/question/1640558
#SPJ4
when an atom loses or gains electrons, the electron configuration for the resulting ion will be different than that of the original atom. if ar were to lose 2 electrons what would be the full electron configuration of the ar2 ion? question 10 options: a) 1s22s22p63s23p6 b) 1s22s22p6 c) 3s23p4 d) 1s22s22p63s23p4 e) 1s22s22p4
1s22s22p63s23p4 What would the entire electron configuration of the ar2 ion be if ar lost 2 electrons?
Does argon gain or lose how many electrons?A noble gas element is argon. As a result of having a fully charged outer shell, argon is extremely stable. The outer shell of argon would be incomplete if it were to give or receive one electron. Argon is already stable, therefore it neither gains nor loses electrons.
What ion does argon produce?Argonium. A proton and an argon atom are combined to form the ion argonium (ArH+). The amount of molecular hydrogen H2 is between 0.0001 and 0.001 percent in diffuse atomic hydrogen gas in interstellar space, where it can be discovered.
Learn more about electron configuration here:
https://brainly.com/question/14283892
#SPJ4
which of the following has more valence electrons than it does core electrons? a.) calcium b.) neon c.) chlorine d.) aluminum
Neon has more valence electrons than does core electrons. The core electrons of neon are 2 and valence electrons are 8.
10 electrons make up neon, with 2 in the outermost shell and 8 in the outermost shell (so eight valence electrons)
With a total of 10 electrons, neon is the tenth element. The initial two electrons in the electron configuration for neon will be in the 1s orbital. The following two electrons for Ne enter the 2s orbital since 1s can only hold two electrons. Six additional electrons will enter the 2p orbital. The Ne electron configuration will be 1s22s22p6 as a result.
Because there are eight electrons in the second energy level (2s22p6) Neon has a full outer shell and an octet. Therefore, it is a Nobel Gas.
For more information on valence electrons kindly visit to
https://brainly.com/question/15054861
#SPJ4
if 50.9 g of aspirin (c₉h₈o₄) are produced from 79.8 g of c₇h₆o₃, what is the percent yield from the reaction below? c₇h₆o₃ (s) c₄h₆o₃ (l) → c₉h₈o₄ (s) hc₂h₃o₂ (aq).
48.90% yield is produced in the given reaction
What is yield of a reaction?
The quantity of moles of a product created in relation to the amount of reactant consumed during a chemical reaction is measured in chemistry as yield, also known as reaction yield.
One of the most important aspects of organic and inorganic chemical synthesis that researchers must take into account is yield. The terms "yield," "conversion," and "selectivity" are used in chemical reaction engineering to describe ratios of how much of a reactant was consumed (conversion), how much of the desired product was formed (yield), and how much of the undesired product was formed (selectivity), represented as X, Y, and S.
Hence, 48.90% yield is produced in the given reaction.
To know more about yield of the reaction from the given link
https://brainly.com/question/20884766
#SPJ4
Write the configuration of a magnesium atom? Will the atom lose or gain electrons? Explain using the idea of stability and energy.
Answer:
[tex]1s^{2} 2s^{2} 2p^{6} 3s^{2}[/tex]
Magnesium will lose 2 electrons.
Explanation:
Looking at a periodic table, magnesium is in the third period and the second group. It would help to look up where atomic orbitals are on the periodic table, but basically, s orbitals are filled in the first two groups. Since magnesium is in the second group, it will just have filled a 3s orbital with two electrons.
Elements in groups 1A, 2A, and 3A especially like to lose electrons to gain stability. Elements want to have a filled valence (outer) orbital with 8 electrons (except for hydrogen and helium) like noble gases. As such, they will lose or gain electrons in the easiest way possible to get a filled valence orbital. Magnesium wants to have the electron configuration of the nearest noble gas, in this case neon, so it will lose 2 electrons to achieve this stability. It takes much less energy to lose 2 electrons than gain 6 to fill its valence orbital, so magnesium will go for the former.
which solute would you expect to most lower the freezing point of water? which solute would you expect to most lower the freezing point of water? all solutes lower the freezing point equally cacl2 sugar nacl
[tex]CaCl_{2}[/tex] is the substance that one would anticipate lowering water's freezing point the most.
This makes use of the freezing point depression theory. When dealing with this problem, we employ the equation shown below:
T = iKfm, which is rendered as follows in English:
Vant Hoff factor times molal freezing point depression constant * Solution molality equals the change in freezing point.
The quantity of molecules, not their composition, determines the freezing point depression because it is a colligative feature.
Now that we are certain that Kf and molality will remain constant, the Van't Hoff factor, also known as "i" is our sole remaining unknown.
The number of atoms that separate from each particular molecule is known as the Van't Hoff factor. The freezing point will be more depressed the greater the Van't Hoff factor.
NaCl will dissociate into Na+ and Cl-, therefore it has I = 2 CaCl2 will dissociate into Ca2+ and 2 Cl-, so it has I = 3. Sugar (C12H22O11) has I = 1.
Choice B is the appropriate response as a result.
To learn more about freezing point, refer:-
https://brainly.com/question/13380426
#SPJ4
What mass of liquid ethanol (c2h5oh) must be burned to supply 500 kj of heat? the standard enthalpy of combustion of ethanol at 298 k is -1368 kj/mol.
500 kJ of heat are created by burning 16.84 grams of ethanol. The standard enthalpy of combustion for ethanol is -1368 kj/mol at 298 k.
Alcohol or fuel: which is ethanol?
A renewable fuel known as "biomass" is used to create ethanol from diverse plant components. Ethanol, often in the form of E10 (10% ethanol, 90% gasoline), is added to more than 98% of gasoline sold in the US in order to oxygenate the fuel and lower air pollution.
Where can you find ethanol?
Corn is the most widely used ingredient in ethanol produced domestically. It can also be produced utilizing cellulosic feedstocks such crop waste and wood, however this is less common. The Midwest region of the United States has a concentration of ethanol facilities since maize production is nearby.
Briefing:
Given the following data:
Standard enthalpy of combustion of ethanol = −1368 kJ/mol.
Temperature = 298 K
By stoichiometry:
1 mole of ethanol = 1368 kJ of heat
X mole of ethanol = 500 kJ
Cross-multiplying, we have:
X = 0.3655 moles
Now, we can determine the mass of ethanol required:
Mass = 16.84 grams
To know more about ethanol visit:
https://brainly.com/question/13264860
#SPJ4
assume the equivalent weight of an acid is 94.0.94.0. calculate the number of ml of 0.353 m0.353 m naohnaoh that would be needed to titrate 0.223 g0.223 g of the acid.
The volume required for titration of NaOH is 0.000837ml.
Given -M=94g
m=0.223g
V=0.353
To find the new volume consider following points -
The most frequently used phrase in chemistry and one of the fundamental ideas in the physical chemistry section is "equivalent weight." The definition of an equivalent weight, also referred to as a gram equivalent, is the mass of one equivalent, or the mass of a given substance that will combine with or replace a specific amount of another substance. To put it another way, the mass of a substance that can displace 1 point 008 grams of hydrogen, 8 point 0 grams of oxygen, or 35 point 5 grams of chlorine is known as its gram equivalent or equivalent weight. As a result, the atomic weight of the substance is divided by its valence to determine the equivalent weight. As an illustration, the oxygen's equivalent weight will be 16 g / 2 = 8 g.Calculations-
[tex]MV=mv\\\\94V=0.223 *0.353\\\\V=\frac{0.223 *0.353}{94} ml\\\\V=0.000837ml[/tex]
To learn about titration of NaOH -
https://brainly.com/question/23911347
#SPJ4
how long on average would it take an oxygen gas molecule (o2) to diffuse a distance of 15.0 mm in air?
Diffusion takes place in the gas phase by the random motion of gas molecules. The thermal motion of gas particles at above absolute zero temperature is called molecular diffusion. Since, molecular diffusion occurs as a result of thermal motion of the molecules, it proceeds at a maximum rate in gases, at a lower rate in liquids, and at a still lower rate in solids.
The diffusion rate can be calculated by t=x²/(2D)
How to calculate the diffusion of gas at a particular distance?
Apply,
time= x²/(2D)
where
D= Diffusion constant = 10 ↑ -9 m²/s
x= distance =15 mm = 15 * 10↑-3 m
then, substitute
t= (15*10↑-3)²/2*10↑-9
=112.5 * 10↑ -3 sec
Thus, Diffusion of gas at a particular distance is
t =3.125* 10↑-5 hours
To know more about molecular diffusion, click on https://brainly.com/question/94094
#SPJ4
True or false: When subject to homogeneous Dirichlet boundary conditions on an in- terval [a,b], every nonsingular second-order linear ordinary differential equation a(x)u" + 6(x) u' + c(u) u = f(x) is (a) self-adjoint, (b) positive definite, (c) positive semi- (x ( definite, with respect to some weighted inner product (9.76).
True. When homogeneous Dirichlet boundary conditions are applied to an interval [a,b], any nonsingular second-order linear ordinary differential equation a(x)u" + 6(x) u' + c(u) u = f(x) is (a) self-adjoint.
What is meant by homogenous?Homogeneous often refers to having the same parts or components. Something that is uniform in nature or character throughout is said to be homogeneous. The term "homogeneous" can also apply to a variety of items that are fundamentally the same as one another or fall under the same category.
What is homogenous in science?A homogeneous mixture has a consistent composition across the whole mixture. The salt water in the aforementioned example is homogeneous because the dissolved salt is evenly distributed across the whole salt water sample.
To know more about Homogeneous visit:
brainly.com/question/9192462
#SPJ4
which of the following is not true? group of answer choices the bronsted-lowry model applies to a wider range of acid-base phenomena than does the arrhenius model. the arrhenius model of acids and bases applies toward substances that are nonaqueous. the arrhenius model of acids and bases was developed before the bronsted-lowry model. the bronsted-lowry model can apply to bases that do not contain hydroxide ions. none of the above
Arrhenius Model of acids and bases is applicable to nonaqueous substances.
Which of the following statements is FALSE?
A) Nonaqueous substances are subject to the Arrhenius Model of acids and bases.
B) The Bronsted-Lowry Model was created before the Arrhenius Model of acids and bases.
C) Bases without hydroxide ions can still use the Bronsted-Lowry Model.
D) Compared to the Arrhenius Model, the Bronsted-Lowry Model covers a greater spectrum of acid-base phenomena.
option A is correct
To know more about bronted lowery model
visit:
https://brainly.com/question/13920847
#SPJ4
WHICH OF THE FOLLOWING IS TRUE ABOUT THE MASSES OF THE SUBATOMIC PARTICALS OF AN ATOM?
a
ELECTRONS AND NEUTRONS ARE 1 AMU AND PROTONS ARE 1/2000 AMU.
b
ELECTRONS, PROTONS AND NEUTRONS ARE ALL 1 AMU.
c
PROTONS AND NEUTRONS ARE 1 AMU AND ELECTRONS ARE 1/2000 AMU.
d
ELECTRONS AND PROTONS ARE 1 AMU AND NEUTRONS ARE 1/2000 AMU.
Answer:
C.
Explanation:
Both protons and neutrons are 1 amu while electrons are 1/2000 amu
Staci ordered a frozen yogurt cone. The picture shows the frozen yogurt cone after Staci was finished and ran off to play. A partially melt yogurt in a cone. Which statement correctly describes the particles that make up the yogurt cone shown? A. The particles move slower and vibrate in place in the melted yogurt. B. The particles stop moving when the yogurt is completely melted. C. The particles move faster and slide past each other in the melted yogurt. D. The particles in the yogurt move only if the temperature changes suddenly.
According to the forces of attraction, in the frozen yogurt which is melted the particles move faster and slide past each other in the melted yogurt.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/14365107
#SPJ1
a 25.0 ml solution of hbr is neutralized with 16.8 ml of 0.105 m sr(oh)₂. what is the concentration of the original hbr solution?
The concentration of the original hbr solution is 0.147m.
How do you make HBr solution?
Distillation of a solution of sodium bromide or potassium bromide with phosphoric acid or sulfuric acid yields HBr: KBr + H2SO4 KHSO4 + HBr Because it oxidises HBr to bromine, concentrated sulfuric acid is less effective: 2 HBr + H2SO4 + 2 H2O Br2 + SO2 + 2 H2O
2Hbr + sr(oh)₂ --> srbrc + 2h₂0
25ml 16.8 ml
xm 0.105 m
for complete neutralization
Moles of Hbr =2× moles of sr(oh)₂
xm × 25ml = 2 × 16.8 ml × 0.105 m
x = 0.147m
Hence 0.147m is a correct answer.
To know more about HBr solution follow link
https://brainly.com/question/10662366
#SPJ4
Gustatory receptors are sensitive to dissolved chemicals but insensitive to light. This is due to.
Gustatory receptors are touchy to dissolved chemical substances however insensitive to mild. this is due to receptor fields.
The receptive area of a somatic sensory neuron is the vicinity of the skin within which a tactile stimulus evokes a sensory response in the cellular or its axon
The receptive subject (RF) of a neuron refers to the attributes of a visual stimulus that generates a reaction in that cell, and commonly includes an outline of visual field area and desire for other precise capabilities, which includes desired orientation or course of visual stimuli.
For instance, the complete place that a watch can see is called the visual view, and the patch of the field of vision that any single neuron video display units is that cell's receptive subject.
Learn more about receptor field here:- https://brainly.com/question/14833020
#SPJ4
what volume of a 0.425 m naoh solution is needed to neutralize 80.0 ml of a 0.176 m solution of h2so4?
The volume of a 0.425M NaOH solution that is needed to neutralize 80.0 ml of a 0.176M solution of sulfuric acid is 33.13mL.
How to calculate volume?The volume of a substance can be calculated using the following expression:
CaVa = CbVb
Where;
Ca = initial concentrationCb = final concentrationVa = initial volumeVb = final volumeAccording to this question, 0.425M NaOH solution is needed to neutralize 80.0 ml of a 0.176M solution of sulfuric acid. The volume needed can be calculated as follows:
0.425 × Va = 80 × 0.176
0.425Va = 14.08
Va = 33.13mL
Therefore, 33.13mL is the volume of the solution.
Learn more about volume at: https://brainly.com/question/12346232
#SPJ1
Describe what happens in a collision??
Answer:
The forces involved in a collision are equal in size and directed in the opposite direction, and they accelerate both objects. Each object accelerates equally in collisions with things of equal mass.
Explanation:
what term is used to describe the thick mixture of liquid and solid used to form the chromatography column?
The dense mixture of liquid and solid utilized to create the chromatography column uses stationary phase and mobile phase. Silica gel is the most widely used stationary phase for column chromatography.
In what types of mixes is chromatography used?For the separation of complicated combinations of amino acids, peptides, carbohydrates, steroids, purines, and a lengthy list of simple chemical compounds, paper chromatography has evolved into a common procedure. On paper, inorganic ions can also be easily separated. Thin-layer chromatography is compared.
Which mixes are separated using column chromatography?A separation method used to separate soluble mixtures is chromatography. A mixture is mixed in a solvent and poured down a column that is filled with a solid substance in column chromatography.
Learn more about organic compounds here:
https://brainly.com/question/11761946
#SPJ4
What do you notice about the temperature while the water is in the process of freezing?.
Answer:
During freezing, the temperature of a substance remains constant while the particles in the liquid form a crystalline solid.
Explanation:
place the steps in order from first to last for confirming the presence of lead(ii) ions in a sample.
The correct steps in order from first to last for confirming the presence of lead(ii) ions in a sample is i, iv, ii, vi, viii, iii, vi, v.
The chemical element of lead ion has the atomic number 82 and the letter Pb. It is a hefty metal with a higher density than the majority of everyday materials. Its melting point is rather low, and lead is soft and flexible. lead ion is a lustrous, slightly blue-tinged grey when it is first cut. A sample is a representative piece or one object taken from a bigger whole or group, especially when it is offered for inspection or displayed as proof of quality: specimen. A sample is a selection of individuals, things, or things used in study that is used for measurement out of a wider population. In order to be able to extrapolate the results from the research sample to the entire population, the sample must be representative of the population.
the complete question is:
place the steps in order from first to last for confirming the presence of lead(ii) ions in a sample.
i) The formation of a white and black precipitate confirms the presence of lead(II).
ii) Decant the liquid above the white precipitate and add hot water to the white precipitate.
iii) Decant the liquid and add K, CrO, to the liquid.
iv) Add HCI to the sample.
v) The formation of a yellow precipitate confirms the presence of lead(II).
vi) Decant the liquid and add HNO, to the liquid.
vi) Decant the liquid and add NH, to the white precipitate.
viii) The formation of a white solid confirms the presence of lead(II).
learn more about lead ion here
https://brainly.com/question/1782326
#SPJ4
name the following iconic compound: CoNO2
Answer:
Cobalt;nitrite
Explanation: there is none that is the compound
Answer:
CoNO2 is an ionic compound and is composed of cobalt cation (having +2 valency) and nitrite anion.
Explanation:
The chemical formula of cobalt cation is Co2+ and the formula of nitrite ion is NO−2 . When writing the name of an ionic compound, the name of the cation is written first and then the name of the anion. So, the name of CoNO2 is Cobalt (II) Nitrite.
Brainliest, Please!During glycolysis, sugar (glucose) is converted to a more usable form called __________________________.
Answer:
-ATP -carbon -glycolysis -Electron -Transport -FADH -phosphates -dioxide -pyruvate -ADP -NADH -Synthase -Water -cytoplasm -Chain -mitochondria -Krebs -oxygen
Explanation:
Ruthenium (Ru) is commonly used in the manufacture of platinum alloys. What is the ground-state electron configuration for an atom of ruthenium?
It always takes specific quantity of energy to remove only 1 electron from an atom.
What is electron?Electron is a stable sub atomic particle with a charge of negetive electricity found in all atoms and acting as the primary Carrier of electricity in solid.
Sol-This is shown by the equation where this is the orbit of the electron around a proton is equal to the quantum. The quantities by energy level, times by wavelength. So this is this equation and then abruptly hypothesis in links quantities. Energy states with a standing wave function so as that the energy of the election on increases its orbit must also increase. And as it is considering the wavelength, we're assuming statnon is constant. It's not to the changing and two pies just by a constant.
As the energy or quantifies energy level of an electron increases the its radius around the nucleus must increase. Also, if its energy level of the decreases, its radius must also decrease. So this is the hypothesis ties together quantities, energy levels and the relationship and its relationship by it with the size of the circumference of around it. A nucleus which is also to the Electron.
To know more about electron click-
https://brainly.com/question/25674345
#SPJ1
What is evaporation
Answer:
The process of turning from liquid into vapor.
Explanation: