Answer:
This is so cause ...
Igneous rocks are formed when the molten material cools and hardens
and
Metamorphic rocks form when they are subjected to high temperatures and the great pressure of the rock layers above it.
So most of these rocks are found beneath the earth''s crust
(I hope im right... this might not be the perfect answer... but this as close as I can get.. I hope it usefull for u )
The given statement is true because igneous and metamorphic rocks are formed through processes that typically occur deep within the Earth's crust or mantle.
What are igneous rocks ?Igneous rocks are formed from molten magma that cools and solidifies beneath the Earth's surface, while metamorphic rocks are formed from existing rocks that are subjected to intense heat and pressure deep within the Earth.
After their formation, these rocks may remain buried beneath the Earth's surface due to ongoing geological processes such as plate tectonics, where rocks are pushed deeper into the Earth's mantle over time.
Additionally, erosion and weathering can expose rocks at the Earth's surface, but the majority of the exposed rocks tend to be sedimentary rocks rather than igneous or metamorphic rocks.
As a result, the vast majority of igneous and metamorphic rocks remain buried deep within the Earth's crust and mantle, making up the majority of the Earth's crust beneath the surface.
Find more on igneous rocks:
https://brainly.com/question/23555197
#SPJ3
help !!!!!!!!!!!!!!!!!!!
3AgBr + GaPO4 = Ag3PO4 + GaBr3
1. How many grams of Ag3PO4 are produced from the use of 10.0 moles of GaPO4?
2. How many grams of AgBr are needed to produce 12 moles of GaBr3?
3. How many grams of GaBr3 are produced from the reaction of 15 moles of GaPO4?
Answer:
1.mass of Ag3PO4=4185.8g
2.mass of AgBr=6732g
Which environmental conditions contribute most to the spread of bacteria?
O A. cold temperatures and low humidity
B. warm temperatures and low humidity
oc, cold temperatures and high humidity
O
D. warm temperatures and high humidity
Select the correct answer from A, B, C, D & E for each statement given below:
A: Anthracite B: Diamond
C: Carbogen D: Urea E: Lampblack
1. An allotrope of carbon used as a tip for deep boring drills.
2. The type of coal with the highest carbon content.
3. An allotrope of carbon, obtained by burning kerosene oil in a limited supply of air.
4. A nitrogenous fertilizer obtained from carbon dioxide.
5. A compound which finds use for a victim of carbon monoxide poisoning.
Answer:
Didn't know the answer, sorry.
what is one of the causes of mechanical weathering
Answer:
Mechanical weathering is usually caused by extreme hot and cold temperatures. Water seeps into cracks in rocks, freezes, and expands, causing further breakdown of rocks. Wind is another example of mechanical weathering.
Explanation:
Answer:
carbon dioxide i think
Explanation:
Which of the following words could have a negative connotation?
Answer:
Where are the following words.
If the valence shell of an atom has 32 electrons,how many sets of degenerate orbitals are in the valence shell
Answer:
4
Explanation:
Given that:
a valence shell of an atom = 32 electrons. This seems to be an atomic element known as germanium. At the outer shell, the number of electrons for germanium is 4. Degenerate orbitals are usually known to be orbitals that possess the same energy. According to the Aufbau principle, the electron filling of germanium (32 electrons) = [Ar] 4s² 3d¹⁰ 4p². So, the number of a degenerate atom of 32 electrons = 4
Calculate the molarity of a solution prepared by dissolving 13.0 g of Na2CrO4 in enough water to produce a solution with a volume of 800. mL .
Express the molarity to three significant digits.
Answer:
molar mass sodium chromate = 162g
12.6g ÷ 162g/mole = moles sodium chromate (This is the solute)
molalrity or M = moles solute ÷ lliters of solution (You'll have to change given mL to L)
______ The total number of protons and neutrons in the nucleus.
A. Atomic Number
B. Mass number
C. Atomic mass
And why? I give Brainliest!
Answer:
A. Atomic Number
Explanation:
The mass number is used to calculate the number of neutrons & electrons in one atom of an element. In order to calculate the number of neutrons you must subtract the atomic number from the atomic mass.
Give an example of an element which was named as honour to a scientist!!
Explanation:
1) Einsteinium
2) Albert Einstein
Answer:
Einsteinium, Rutherfordium, Nobelium, Curium etc are some examples of elements named after scientists
7. Put the following elements in order from smallest to largest atomic radius and explain
why:
C.0, Sn, Sr
Answer:
O, C, Sn, Sr
Explanation:
As per the periodic table trends, atomic radius of an atom deceases from left to right and increases down a group this is so because across a period or from left to right, number of protons increases that increases the nuclear charge and nuclear radius decreases. Down the group, atomic radius increases because energy level increases and distance between nucleus and outermost orbital increases.
The elements in order from smallest to largest atomic radius are:
O, C, Sn, Sr because as per the periodic table trends, oxygen (O) fall into right side of Carbon (C) in the periodic table and Strontium (Sn) and Tin (Sn) fall into down the group where Tin (Sn) is on the right side of Strontium (Sn).
Hence, the correct order is "O, C, Sn, Sr".
describe Transpiration
Answer:
is the process of water movement through a plant and its evaporation from aerial parts, such as leaves stems and flowers.
Answer:
well in easy terms... its just like the loss of water from the leaves or other parts of a plant due to evaporation
Explanation:
Water is necessary for plants but only a small amount of water taken up by the roots is used for growth and metabolism.
What is the relationship between the molecular mass and the molar mass of a substance?
Answer:
That is, the molar mass of a substance is the mass (in grams per mole) of 6.022 × 10 23 atoms, molecules, or formula units of that substance. In each case, the number of grams in 1 mol is the same as the number of atomic mass units that describe the atomic mass, the molecular mass, or the formula mass, respectively.
Answer:
The molar mass of a substance is the mass (in grams per mole) of 6.022 x [tex]10^{23}[/tex] atoms, molecules, or formula units of that substance.
Explanation:
In each case, the number of grams in 1 mol is the same as the number of atomic mass units that describe the atomic mass, the molecular mass, or the formula mass, respectively.
The ocean floor, some parts of which get no sunlight, is the *
Answer:
Aphotic zone
Explanation:
Which option below will have a charge of negative 3?
A. Two electrons and five protons
B. Two electrons and three protons
C. Five electrons and two protons
D. Three electrons and two protons
Answer:
C
Explanation:
When the electron is greater than proton the atom will be negatively charged.
So, 2-5= -3
Hope this helped you!
When a molecule is separated into its components parts it form
A. Componds
B. Atoms
C. Protons
D. Ions
When a molecule is separated into its components it forms atoms as molecules are made up of same or different kind of atoms.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
What will lithium and bromine make when they bond
Answer:
they will form a compound
Answer:
When lithium and bromine bond it makes lithium bromide.
What is the charge of an atom with 6 protons and 8 electrons?
A. +2
B. -2
C. +6
D. -6
Answer:
B
Explanation:
Because the electrons are greater than the protons which makes the atom negative charged.
And when you minus 6-8=-2
Hope this helped!
The charge of an atom with 6 protons and 8 electrons is -2. Because the number of electrons dominates by 2 units.
What is charge of an atom?Atoms in their neutral state have equal number of electrons and protons. Electrons are negatively charged particles and protons are positively charged particles.
Hence, all the positive charges are neutralized with equal number of negative charges. When atoms loss or gain electrons they gets charged and this charged atom is called ions.
When electrons dominates in number or atoms gain electrons they acquire negative charge and form anions. Similarly if atoms loss electrons they form positive ions.
Here, the number of electron is 2 greater than protons. Hence the charge of the atom is -2.
Find more on ions:
https://brainly.com/question/14982375
#SPJ2
describe the relationship between kinetic energy and mass
Answer:
Kinetic energy has a direct relationship with mass, meaning that as mass increases so does the Kinetic Energy of an object. ... Objects with greater mass can have more kinetic energy even if they are moving more slowly, and objects moving at much greater speeds can have more kinetic energy even if they have less mass
If the reaction of 91.3 grams of C3H6 produces a 81.3% yield, how many grams of CO2 would be produced?
Answer:
81.3 a
Explanation:
Just search up answers on wolframalpha.com
Please Help!!
The covalent bonds within a molecule are (very strong/weak). However it requires (more/less) energy to melt a molecular compound than an ionic compound?
This is because the attractive forces between individual molecules are (weaker/stronger) than the forces between ions in an ionic compound.
choose the correct answer in the parentheses.
Answer: The covalent bonds within a molecule are very (strong). However it requires (less) energy to melt a molecular compound than an ionic compound.
This is because the attractive forces between individual molecules are (weaker) than the forces between ions in an ionic compound.
The term chemical bond generally refer to the attractive force which holds the respective ions or atoms of a molecular substance. Bonding in the compounds helps to attain the stability.
What is a covalent bond?A bond which is formed by the sharing of an electron pair among the atoms is known as the covalent bond. The concept of covalent bond was introduced by G.N Lewis in 1916.
An ionic bond is generally formed by the transfer of one or more electrons from one atom to another. In an ionic bond the positive and negative ions are held together by the electrostatic forces of attraction.
The ionic compounds have high melting and boiling points and in order to break the ionic bonds there is a need to supply large amount of energy than the covalent bonds. Thus ionic compounds are found to be stronger than the covalent compounds.
The covalent bonds within a molecule are (very strong) and it requires (less) energy to melt a molecular compound. The attractive forces between individual molecules are (weaker) than the forces between ions in an ionic compound.
To know more about the covalent bond, visit;
https://brainly.com/question/29545093
#SPJ5
What mass of krypton gas has a volume of 2.33 L at 53°C and 311 kPa?
i have no clue what so ever sorry
Answer:
22.35
>:) now go show your science teacher you have the smart
Analyses of mutations show they only result in variations in?
Answer:
Genetic variation
Explanation:
measure of the genetic differences that exist within a population.
After mixing equal amounts of the two molecules, the solution achieved equilibrium at 25 ∘ C . 25 ∘C. The concentration at equilibrium of glucose 1‑phosphate is 0.01 M, 0.01 M, and the concentration at equilibrium of glucose 6‑phosphate is 0.19 M. 0.19 M. Calculate the equilibrium constant, K eq , Keq, and the standard free energy change, Δ G ∘ , ΔG∘, of the reaction mixture.
Answer:
Keq = 19
ΔG° = -7.3kJ/mol
Explanation:
Based on the chemical reaction:
Glucose 1-phosphate ⇄ Glucose 6-phosphate
The equilibrium constant, Keq is defined as:
Keq = [Glucose 6-phosphate] / [Glucose 1-phosphate]
Where [] are equilibrium concentrations of each substance
Replacing:
Keq = [0.19M] / [0.01M]
Keq = 19
Now, standard free energy change, ΔG° is defined as:
ΔG° = -RT ln K
Where R is gas constant 8.314J/molK
T is absolute temperature (25°C + 273.15K = 298.15K)
and K is equilibrium constant = 19
Replacing:
ΔG° = -8.314J/molK*298.15K ln 19
ΔG° = -7299J/mol
ΔG° = -7.3kJ/mol
URGENT!
(a) A gas' pressure is 765 torr at 296k. At what temperature will the pressure be 560. torr?
(b) Which gas law is being represented above?
Boyle's Law, Charle's Law, Gay-Lussac's Law?
Answer !BOTH! questions.
Answer:
GAY-LUSSAC'S LAW.
Explanation:
P1 = 765 torr
T1 = 23°C = 296K
P2 = 560. torr
T2 = ?
(765 torr)/(296K) = (560. torr)/ T2
T2 = 226 K = -57°C
Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore the new temperature is -57°C. the law that is used over here is Gay-Lussac's Law.
What is ideal gas equation?Ideal gas equation is the mathematical expression that relates pressure volume and temperature. Ideal gas is only for ideal gas.
Mathematically the relation between Pressure, volume and temperature can be given as
PV=nRT
where,
P = pressure of gas
V= volume of gas
n =number of moles of gas
T =temperature of gas
R = Gas constant = 0.0821 L.atm/K.mol
P1 = 765 torr
T1 = 23°C = 296K
P2 = 560. torr
T2 = ?
Applying Gay-Lussac's Law
(765 torr)/(296K) = (560. torr)/ T2
T2 = 226 K = -57°C
Therefore the new temperature is -57°C. the law that is used over here is Gay-Lussac's Law.
To learn more about ideal gas equation, here:
https://brainly.com/question/14826347
#SPJ2
hello, if you can please help!
Answer:
A: False
Explanation:
B: True
C: part of earths mantle.
Given 35.0 grams of aluminum at 22.0 °C. What will be the final temperature of the Al if 300.0 joules of heat energy is added to the Al? (The specific heat of Al is 0.217 cal/g°C)
An anion reaction with a metal and forms a -3 charge. How many atoms of the metal would be required if the element is in group 1 on the periodic table?
Answer:
3 atoms
Explanation:
The number of atoms of the metal that would be required as it forms an anionic charge of -3 is 3 atoms.
Elements in group 1 generally have a charge of +1. They have a valency of 1
By the virtue of this;
It will take 3 atoms of a group one element to combine with an anion with a -3 charge on it.
This way, the ionic bond forms and the compound becomes neutral.
how do we separate cork and lead
Answer:
water exposure because it extracts millennials which is a product
Which of the following is NOT a way unbalanced forces can cause an object to change its motion?
A. changing the object's direction
B. stop the obect from moving
C. the object's motion stays constant
D. start the object moving