Answer:
0.354 molal
Explanation:
The molarity (M) or the concentration of a solution is defined as the number of moles of a compound in the solution per liter of solution (mol/L), whereas molality, is defined as the number of moles of a compound in the solution per kg of the compound (mol/kg).
Given that the density of the solution is 1.202 g/mL, which is equivalent to 1.202 kg/L. Since the prefix mili- denotes a factor of one thousandth ( [tex]10^{-3}[/tex] ) and kilo- denotes a factor of one thousand ( [tex]{10}^3[/tex] ),
[tex]1.202 \ \frac{g}{mL} \ = \ 1.202 \ \frac{g}{(10^{-3}) L} \ = \ 1.202 \ \frac{{10}^3g}{L} \ = \ 1.202 \ \frac{kg}{L}[/tex].
To calculate the corresponding molality of the solution, the formula
[tex]Molality \ (mol/kg) \ = \ \frac{Molarity \ (mol/L)}{Density \ (kg/L)}[/tex] is used.
Therefore,
[tex]Molality \ = \ \frac{0.426 \ mol/L}{1.202 \ kg/L} \ = \ 0.354 \ mol/kg \ \ (3 \ s.f.)[/tex]
Heart, 5 stars, and Brainiest to first right answer!
Which of these is a likely impact of stronger than normal trade winds in the Pacific Northwest of the United States?
A. Jet stream would be displaced northwards causing drought
B. Jet stream would be displaced southwards causing drought
C. Jet stream would be displaced southwards causing heavy rain and flooding
D. Jet stream would be displaced northwards causing heavy rain and flooding
I think correct answer is C.Jet stream would be displaced southwards causing heavy rain and flooding
The statement that is a likely impact of stronger than normal trade winds in the Pacific Northwest to the United States is Jet stream would be displaced southwards causing heavy rain and flooding.
Which of the following could be classified as unleavened bread?
sourdough bread
muffins
tortilla
bagels
Answer:
Tortilla
Explanation:
Answer:
tortilla
Explanation:
what is the chemical formula of copper (ii) hyddroxide
Answer:
Cu(OH)₂
Explanation:
Hope that helps
Answer: The chemical formula is Cu(OH)₂
what is the molecular geometry of AsCl3?
Molecules' general shape, as well as bond lengths, bond angles, torsional angles, and any other geometrical factors that affect each atom's position, are revealed by their molecular geometry. The molecular geometry of AsCl₃ is trigonal pyramidal.
Molecule geometry is the study of the three-dimensional configuration of the atoms that make up a molecule. Because the shared pairs of electrons remain localized in a specific location between the nuclei of the involved atoms, covalent molecules have directed bonds.
The arsenic atom is surrounded by 4 regions of electron density which means that it has a steric number equal to 4. According to VSPER Theory, the molecular geometry will be trigonal pyramidal, AX₃E₁.
To know more about molecular geometry, visit;
https://brainly.com/question/31383201
#SPJ6
Which statements prove the law of conservation of matter (select all that apply)
a) burning a piece of paper
b) sugar dissolving into water
c) cookie dough is baked into a cookie
d) water evaporating in the water cycle which is an open system
Answer:
It's all of the above.
Explanation:
I took the quiz.
If I place an egg in orange soda will it gain mass or lose mass?
Answer:
The soda or the egg?
Explanation:
The soda will gain but the egg will lose it may take a while though
Answer:
Gains Weight UwU
Explanation:
Seeds Roots Cones Stem Spores Leaves 1. Mongo 2. Moss 3. Ferns 4. Pine Tree 5. Guava 6. Mango 7. Coconut 8. Katakataka 9. Potato 10. Okra 14
The method of propagation of the given organisms is shown below:
1. Mongo ---> seeds
2. Moss ---> spores
3. Ferns ---> stem
4. Pine Tree ---> cones
5. Guava ---> seeds
6. Mango ---> seeds
7. Coconut ---> seeds
8. Katakataka ---> leaves
9. Potato ---> stem
10. Okra ---> seeds
Definition of reproductionRepr0duction is the process by which living organisms produce young ones of their kind.
Repr0duction can either involve two parents through the joining of male and female gametes to produce a zygote i.e. seeds in plants and embryo in animals or can involve only one parent and occurs through vegetative parts such as roots, stem, or leaves.
List of organisms and their propagation partsThe table below gives organisms and their propagation parts:
1. Mongo ---> seed
2. Moss ---> spores
3. Ferns ---> stem
4. Pine Tree ---> cones
5. Guava ---> seeds
6. Mango ---> seeds
7. Coconut ---> seeds
8. Katakataka ---> leaves
9. Potato ---> stem
10. Okra ---> seeds
Learn more about propagation and repr0duction at: https://brainly.com/question/13876478
Which species has 54 electrons
Answer: Neutral Xe atom
What kind of intermolecular forces act between two chloramine (NH2CI) molecules?
Explanation:
brain and heart froce acts between two chloramine
Answer:
Dispersion, Hydrogen-bonding, and Dipole forces act between two chloramine (NH2CI) molecules.
Explanation:
Dispersion is exerted between all molecules. Chloramine is polar, therefore dipole forces are present. The molecular geometry of chloramine (NH2Cl) is a trigonal pyramidal, therefore hydrogen-bonding forces are present.
452 grams of ammonium carbonate are dissolved to make 1050 mL of solution. What is the molarity of the solution?
Do not forget significant figures. Write your final answer with no units.
Answer:
1050-452 = 598, the liquid is more than the ammonium chloride so it is the majority
pa help thank yoeee <3333
Answer:
1.c
2.c
3.a
4.b
5.a
i think that's the answer
CO 2 is an element. true or false
Answer: false
Explanation:
f this helps typically an element wont have a 2 next to it, to see if something is an element or compound check for the element on the periodic table and see if the structure or name matches the one given to you on the question. for example here it is Co2 on the periodic table it's simply written as Co
co2 or carbon dioxide is a compound not an element, you can even check this on the periodic table
Answer:
true
Explanation:
co2 is carbon dioxide
Hope this helps.
a solid substance a is soluble in water to the extent of 10 mg/ml of water at 25oc and 100 mg/ml of water at 100oc. you have a sample that contains 100 mg of a and 25 mg of an impurity b. a and b have the same solubility behavior. if one 10ml portion of water was used for the recrystallization, what was the % recovery of a
Answer:
join the provisonal IRA and help free and unite ireland
Explanation:
fight aganst the english oppressors and free ireland
erinn go braugh
Mole problems. See the image for reference. Please show your work.
? Which types of batteries are commonly used in laboratory equipments
Answer:
your question is not very clear but I think the answer is either
Primary (non-rechargeable)
Secondary (rechargeable) or
Lithium-ion battery.
Rechargeable li-ion button cell.
Gaseous methane reacts with gaseous oxygen gas to produce gaseous carbon dioxide and gaseous water. If 0.809g of carbon dioxide is produced from the reaction of 0.80g of methane and 2.1g of oxygen gas, calculate the percent yield of carbon dioxide.
Be sure your answer has the correct number of significant digits in it.
Answer:
About 58%.
Explanation:
We first need to write the balanced chemical equation:
[tex]\displaystyle \text{CH$_4$(g)} + 2\text{O$_2$(g)} \longrightarrow \text{CO$_2$(g)} + 2\text{H$_2$O(g)}[/tex]
We are given that 0.809 g of carbon dioxide was produced from the reaction of 0.80 g of methane and 2.1 g of oxygen gas. We want to calculate the percent yield of carbon dioxide.
First, determine the limiting reagent. We can convert each initial mass to the mass of carbon dioxide using stoichiometry. The molar mass of methane is 16.05 g/mol and the molar mass of carbon dioxie is 44.01 g/mol. From the equation, every one mole of carbon dioxide is produced from every one mole of methane and every two moles of oxygen gas.
0.80 g of methane will (theoretically) produce:
[tex]\displaystyle \begin{aligned} 0.80 \text{ g CH$_4$} &\cdot \frac{1 \text{ mol CH$_4$}}{16.05 \text{ g CH$_4$}} \cdot \frac{1 \text{ mol CO$_2$}}{1 \text{ mol CH$_4$}} \cdot \frac{44.01 \text{ g CO$_2$}}{1 \text{ mol CO$_2$}} \\ \\ & = 2.2 \text{ g CO$_2$}\end{aligned}[/tex]
2.1 g of oxygen gas will (theoretically) produce:
[tex]\displaystyle \begin{aligned} 2.1 \text{ g O$_2$} & \cdot \frac{ 1 \text{ mol O$_2$}}{32.00 \text{ g O$_2$}} \cdot \frac{1 \text{ mol CO$_2$}}{2 \text{ mol O$_2$}}\cdot \frac{44.01 \text{ g CO$_2$}}{1 \text{ mol CO$_2$}} \\ \\ & = 1.4 \text{ g CO$_2$} \end{aligned}[/tex]
Hence, oxygen gas is the limiting reagent. A maximum of 1.4 g of carbon dioxide can be produced.
To calculate the percent yield, we divide the actual yield by the theoretical yield. The actual yield was 0.809 g and the theoretical yield is 1.4 g. Hence:
[tex]\displaystyle \begin{aligned} \%\text{Yield} & = \frac{\text{Actual}}{\text{Theoretical}} \times 100\% \\ \\ & = \frac{(0.809\text{ g CO$_2$})}{(1.4\text{ g CO$_2$})} \times 100\% \\ \\ & = 58\%\end{aligned}[/tex]
In conclusion, the percent yield of carbon dioxide is about 58%.
How many moles are in 50 g of CO2
Answer:
1.1 mol
Explanation:
n=m/M, where n is moles, m is mass, and M is molar mass.
M of CO2 = 12.01+16.00+16.00 = 44.01g/mol
n=50g/44.01g/mol
n = 1.13610543 mol
n ≈ 1.1 mol
Hope that helps
2). How are simple carbohydrates, like glucose, used to build starches?
Carbohydrates which include sugars and starches are the primary energy sources produced in plants and used by heterotrophic organisms.
Carbohydrates are composed of a basic chemical formula that typically contains a ratio of one Carbon atom for every two Hydrogen atoms and one Oxygen atom C1H2O1. Basically one carbon atom for every one water molecule Carbon + Water = Carbohydrate.
Monosaccharides or Single Carbon Chain Sugars include Glucose C6H12O6
Disaccharides or Double Carbon Chain Sugars include Sucrose C12H22O11
Combining monosaccharides and disaccharides create Polysaccharides which are complex sugars called starches.
PLEASE PLEASE HELP! CHEM!
Answer:
0.963158 maybe just put 0.96
Explanation:
732mmhg to atm is 0.963158 i looket it up sorry if I am wrong
What is the most soluble in water? iconic, covalent, metallic or nonmetallic
Y’all what’s this I don’t feel like doing it and I’ll give brainlist too
Answer:
2.Closed System: A closed system is a thermodynamic system where energy can be exchanged with its surrounding but not matter. Open System: Open systems can exchange matter with the surrounding. Closed System: Closed systems cannot exchange matter with the surrounding. Open System: The mass of the system will vary with time in open systems.
Explanation:
1.The particle model is the name for the diagrams used to draw solids, liquids and gases. In the model, the particles are shown as circles or spheres. However, the particles in ice, liquid water and steam look the same because they are all water, but in different states of matter. Why do we use the particle model in science?
3.An open system can be defined as a system which can exchange both matter and energy with the surrounding. For example, the earth can be recognized as an open system. In this case, the earth is the system, and space is the surrounding. Sunlight can reach the earth surface and we can send rockets to space.
An unknown substance has a boiling point of 174°C. Which statement is true about this unknown substance?
a) It has a higher boiling point than water, and it likely has stronger electrostatic forces between its molecules than water.
b) It has a higher boiling point than water, and it likely has weaker electrostatic forces between its molecules than water.
c) It has a lower boiling point than water, and it likely has weaker electrostatic forces between its molecules than water.
D) It has a lower boiling point than water, and it likely has stronger electrostatic forces between its molecules than water.
Answer:
It has a higher boiling point than water, and it likely has a stronger electrostatic forces between its molecules than water.
Explanation:
The unknown substance has a higher boiling point than water, and it likely has stronger electrostatic forces between its molecules than water.
What is the meaning of Boiling Point ?The temperature at which a liquid's saturated vapour pressure equals the air pressure surrounding it is known as the boiling point.
It is given that an unknown substance has a boiling point of 174°C.
The boiling point of water is 100°C.
So the boiling point of the unknown substance is higher than that of water.
Higher boiling point signifies more heat required to break the bonds.
Higher boiling point means existence of strong non covalent bonds.
This means it likely has stronger electrostatic forces between its molecules than water.
Therefore Option A is the correct answer.
To know more about Boiling Point
https://brainly.com/question/2153588
#SPJ2
What makes a cyclone rotate counter-clockwise north of the Equator and clockwise south of the Equator?
1 Ocean currents
2 Coriolis Effect
3 the Jet Stream
4 Landscape differences
The Coriolis Effect (Core-nol-e-us)
I figured it out no problem
Answer:
good job ;0
Explanation:
The person who answerers this will get 100 points pls answer all the question's
Answer:
I think that is the literal answer
What volume in liters of carbon dioxide will be produced by the reaction of 18.5 liters of oxygen gas at STP?
L CO2
C3H8(g) + 5 O2(g) --> 3 CO2(g) + 4 H2O(g)
**Report your answer to the correct number of significant digits!
Answer:
0.16 L
Explanation:
Step 1: Write the balanced equation
C₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(g)
Step 2: Calculate the moles of CO₂ produced from 0.012 moles of O₂
The molar ratio of O₂ to CO₂ is 5:3. The moles of CO₂ produced are 3/5 × 0.012 mol = 0.0072 mol.
Step 3: Calculate the volume occupied by 0.0072 moles of CO₂ at standard temperature and pressure
At STP, 1 mole of CO₂ occupies 22.4 L.
0.0072 mol × 22.4 L/1 mol = 0.16 L
HOPE THAT HELP YOU mark me brinilylist
Which muscles is most important to you and why?
Answer:
cardiac muscle
Explanation:
because they help the heart to pump blood to all parts of the body
Answer:
Muscle is also very important to everyone because we need our muscles to survive. The HEART is the strongest muscle in our body and is always looking to get stronger. Muscles enable us to be active and exercise. Our strength comes for our muscles and how much they are used.
Explanation:
#CarryonlearningThe lab stockroom has a bottle of Sulfuric acid labeled 15.5M. How many mL of water will you need to add to 5.41mL of the acid solution in order to get a concentration of 0.175M?
The volume of water needed to make the solution is 473.76 mL
We'll begin by calculating the volume of the diluted solution.
Molarity of stock solution (M₁) = 15.5 MVolume of stock solution needed (V₁) = 5.41 mL Molarity of diluted solution (M₂) = 0.175 MVolume of diluted solution (V₂) =?M₁V₁ = M₂V₂
15.5 × 5.41 = 0.175 × V₂
83.855 = 0.175 × V₂
Divide both side by 0.175
V₂ = 83.855 / 0.175
V₂ = 479.17 mL
Finally, we shall determine the volume of water needed.
Volume of stock solution needed (V₁) = 5.41 mLVolume of diluted solution (V₂) = 479.17 mLVolume of water =?Volume of water = V₂ – V₁
Volume of water = 479.17 – 5.41
Volume of water = 473.76 mL
Therefore, the volume of the water needed is 473.76 mL
Learn more about dilution: https://brainly.com/question/16167657
given the reaction 4Na(s) +O2 -> 2Na2O How many grams of Na2O can form from 3.0g of Na? use these molecular weight Na=23g/mole and O = 16g / mole
A quantity of HCL ( 1.5*10⁻³ M) is added to water at 25°C to increase the hydrogen ion concentration from 1*10⁻⁷ to 1.5* 10⁻³ moles per liter. What is the new hydroxyl ion concentration?