Need help! Photo says all! Will mark brainliest :)

Answer:

(I).  The acceleration of the cart with low fan speed is 18 cm/s²

(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²

(III).  The acceleration of the cart with high fan speed is 32 cm/s²

Explanation:

Given that,

You looked at speed-time graphs to determine the acceleration of the cart for each of the three fan  speeds in the lab.

According to graph,

A , B and shows the high, medium and low fan speeds respectively.

We know that,

The speed-time graph shows the acceleration.

Acceleration is equal to the rate of change of velocity.

(I). We need to calculate the acceleration of the cart with low fan speed

Using formula of acceleration

[tex]a_{l}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]

Put the value from graph

[tex]a_{l}=\dfrac{125-0}{7}[/tex]

[tex]a_{l}=18\ cm/s^2[/tex]

(II). We need to calculate the acceleration of the cart with medium fan speed

Using formula of acceleration

[tex]a_{m}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]

Put the value from graph

[tex]a_{m}=\dfrac{140-0}{6}[/tex]

[tex]a_{m}=23.3\ cm/s^2[/tex]

(III). We need to calculate the acceleration of the cart with high fan speed

Using formula of acceleration

[tex]a_{h}=\dfrac{v_{f}-v_{i}}{t_{f}-t_{i}}[/tex]

Put the value from graph

[tex]a_{h}=\dfrac{160-0}{5}[/tex]

[tex]a_{h}=32\ cm/s^2[/tex]

Hence, (I).  The acceleration of the cart with low fan speed is 18 cm/s²

(II). The acceleration of the cart with medium fan speed is 23.3 cm/s²

(III).  The acceleration of the cart with high fan speed is 32 cm/s²

Answer:

18.0, 24.0, 32.0

Explanation:

just did it

Answer: b

Explanation:Because protons are positive and the nucleus is positive so it will be repelled and the neutron is neutral so it will be unaffected.

Answer:

I think its A & C

Explanation:

The vertical columns on the periodic table are called groups or families because of their similar chemical behavior.

Elements located in the vertical column of the periodic table are of the same group and have similar chemical properties, therefore the correct answer is option A and option C.

The total number of protons present in an atom is known as the atomic number of that atom.

While the atomic mass of an atom is the sum of the total number of protons and the number of neutrons present inside any atom.

The element belonging to the same group have approximately similar chemical behavior while on the other hand element belonging to the same period would have the same outermost shell.

The correct response is option A and option C because elements included in the vertical column of the periodic table belong to the same group and have comparable chemical characteristics.

Learn more about the atomic number here, refer to the link ;

brainly.com/question/14190064

#SPJ2

Answer:

Explanation:

No, not any of these substance will float in Methanol , simply because Methanol has a density of 0.79 g, if you put any substance that weighs more than 0.79 g, it will sink, it all depends on the weight if it is more or less than methanol  

2: D=m/v

D=135/50 = 2.7 g/cm³ ( Aluminum)

D=M/V

if two objects has the same mass but one has larger volume, then te one with larger volume has less density

example : 2 objects

mass of both=350

volume of the first one=500 and  the other 750

D1=M1/V1 = 350/500 =0.7

D2 = M2/V2 = 350/750 = 0.4666

D1 is larger than D2( with larger volume )

Answer:

multiplication

Explanation:

multiply your distance of 18 kilometers by 1,000 to get 18,000 meters.

Answer:

7.27 m/s

Explanation:

You would be dividing 40 (distance) by 5.5 (time) to get the average velocity of 7.27 m/s .

Answer:

7.27

Explanation:

40/5.5=7.27

Answer:

t = 25 seconds

Explanation:

Given that,

Distance, d = 115 m

Initial speed, u = 4.2 m/s

Final speed, v = 5 m/s

We need to find the time taken in increasing the speed.

We know that,

Acceleration, [tex]a=\dfrac{v-u}{t}[/tex] ....(1)

The third equation of kinematics is as follows :

[tex]v^2-u^2=2ad\\\\\text{Put the value of a in above equation}\\\\v^2-u^2=2\times \dfrac{v-u}{t}\times d\\\\\because (a^2-b^2)=(a-b)(a+b)\\\\(v-u)(v+u)=\dfrac{2\times (v-u)d}{t}\\\\t=\dfrac{2d}{v+u}\\\\\text{Putting all the values}\\\\t=\dfrac{2\times 115}{4.2+5}\\\\t=25\ s[/tex]

Hence, it will take 25 seconds to increase the speed.

Answer: A a decrease of 8000

Explanation: 10,500 - 2,500= 8000

Answer:

Its A

Explanation:   Sure

Answer:

2700

Explanation:

1m/s=3.6km/hr

Answer:

the speed limit 6 seconds and the car will travel in 90m

Answer:

pascal

Explanation:

its obtained after either division or multiplication

Answer:

The answer to your question is 404.2000

Answer:

the distance between point a and b and the time it takes to get from a to b.

Explanation:

d/t =v

Answer:

you need to include the units for both axis to be able to answer this

Explanation:

average speed in uniform motion is the slope anywhere on the line but you could always pick 2 points and do it that way and speed is just rise over run

or y2-y1/x2-x1

Pick two points on the line and determine their coordinates.

Determine the difference in y-coordinates of these two points (rise).

Determine the difference in x-coordinates for these two points (run).

Divide the difference in y-coordinates by the difference in x-coordinates (rise/run or slope).

the second bit i think they are looking for this calculation y = mx + b, where m is the slope and b is the y-intercept (where the line crosses the y axis (the vertical one that has no units

Then use that formula for the last question and put in the x value of 10 and complete the formula to find out what y is

Answer:

3 m

Explanation:

[tex]work \: = force \times displacement \\ 450 = 150 \times displacement \\ displacement = 3m[/tex]

Answer:

the percentage we have the fraction between the error and the magnitude,

Explanation:

When absolute error is used, it is a value that remains constant regardless of the magnitude of the measurement, for large measurements it can represent great accuracy, but for small measurements the accuracy may be low, for example> if we use a tape measure with error of Dx = 0.1 cm if the measurement is 1 meter this error is acceptable, but if the measurement is 1 cm the error is too big.

When we use the percentage we have the fraction between the error and the magnitude, so if this relationship is small the measure is very tight and but if the relationship is high the measure has little pressure, for example

           Δx = 1 cm = 0.01 m

          % = 0.01 / 1   100 = 1%

          % = 0.01 / 0.01 100 = 100%

therefore the precision of the measurement is known the percentage error

Answer:

Float

Explanation:

It is given that,

The density of water is 1 g/mL

The density of a rock is 0.87 g/mL

It can be seen that the density of water is more than that of rock. The density of an object is calculated from its mass and volume.

If the density of liquid in which it is placed, is more that that of the object, it will float at the top.

Hence, in this case the rock will float.

Answer:

The time is 0.6 sec.

Explanation:

Given that,

Acceleration of car = 7.2 m/s²

Speed = 4 m/s

We need to calculate the time

Using equation of motion

[tex]v=u+at[/tex]

Where, u = initial velocity

v = final velocity

a = acceleration

t = time

Put the value in the equation

[tex]4=0+7.2\times t[/tex]

[tex]t=\dfrac{4}{7.2}[/tex]

[tex]t=0.6\ sec[/tex]

Hence, The time is 0.6 sec.

Answer:

7.5 seconds

Explanation:

Given that a dog starts at the origin and runs forward at 6 m/s for 1.5 s

From speed formula

Speed = distance/time

Substitute speed and time into the formula

6 = distance/1.5

Distance = 6 × 1.5 = 9 m

and then turns around to fetch the ball by

running backward at 7 m/s for 3 s. If the dog runs.

Calculate the distance covered

Distance = 7 × 3 = 21 m

This means that the dog ran beyond the original position.

The elapsed distance = 21 - 9 = 12m

back to the origin at 4 m/s, by covering distance 12 m

Calculate the time.

Speed = distance/time

Time = 12/4 = 3s

The time elapsed between the start and when he returns with the ball will be:

T = 1.5 + 3 × 3

T = 7.5 seconds

Answer:

They are accurate and reproducible.

Explanation:

Answer:

They are precise and reproducible.

Explanation:I just took the test on Edgenuity

Answer:

The average speed will be "1038 mph".

Explanation:

Period for one revolution is:

T = 24 hours

  = 86,400 sec

x = c = 2πr

The given values is:

r = 6.38×10⁶ m

Now,

⇒  [tex]T=\frac{2 \pi r}{v}[/tex]

Or,

⇒  [tex]v=\frac{2 \pi r}{T}[/tex]

On substituting the values, we get

       [tex]=\frac{2 \pi (6.38\times 10^6)}{86,400}[/tex]

       [tex]=464 \ min/sec[/tex]

       [tex]=(464 \frac{min}{sec}) (\frac{3600 \ sec}{1 \ hour} )(\frac{1 \ mi}{1609 \ m} )[/tex]

       [tex]=1038 \ mph[/tex]

First find the diameter of each.

Jupiter’s diameter is 86,881 mi.

Earth’s diameter is 7,917.5 mi.

Then divide those two.

Rounded, Jupiter is 11 times larger.

unrounded: 10.9732870224186927691821913482791285127

Finding out how large something is compared to something can be done by dividing.

For example I have two dogs. One dog is 3 feet tall. The other is 2 feet tall. How much taller is dog one? Dog one is 1.5 times larger because 3/2 = 1.5 AND 2 x 1.5 = 3.

So for this case multiplying Earth’s diameter by 10.9732870224186927691821913482791285127 will give you Jupiter’s diameter.

Answer:

2 m/s

Explanation: Given that a flatbed car of a train moves 8 m/s to the east. A jogger runs along to top the flatbed car (which is not very safe) with a velocity of 6 m/s to the west.

Since the jogger is moving in an opposite direction to the direction of the train, and velocity is the distance covered in a specific direction, the jogger will be moving at a velocity relative to the velocity of the train.

Velocity = (8 - 6) m/s

Velocity = 2 m/s

Therefore, the jogger will be moving at the speed of 2 m/s

Answer:

Vf = 15 m/s

Explanation:

First we consider the upward motion of ball to find the height reached by the ball. Using 3rd equation of motion:

2gh = Vf² - Vi²

where,

g = acceleration due to gravity = -9.8 m/s² (negative sign for upward motion)

h = height =?

Vf = Final Velocity = 0 m/s (Since, ball momentarily stops at highest point)

Vi = Initial Velocity = 15 m/s

Therefore,

2(-9.8 m/s²)h = (0 m/s)² - (15 m/s)²

h = (-225 m²/s²)/(-19.6 m/s²)

h = 11.47 m

Now, we consider downward motion:

2gh = Vf² - Vi²

where,

g = acceleration due to gravity = 9.8 m/s²

h = height = 11.47 m

Vf = Final Velocity = ?

Vi = Initial Velocity = 0 m/s

Therefore,

2(9.8 m/s²)(11.47 m) = Vf² - (0 m/s)²

Vf = √(224.812 m²/s²)

Vf = 15 m/s

Answer:

The __law__ conservation

of state that either energy may produced nor destroyed

In space we feel weightlessness because the earth's gravity has less effect on us. The Earth's gravitational attraction at those altitudes is only about 11% less than it is at the Earth's surface. If you had a ladder that could reach as high as the shuttle's orbit, your weight would be 11% less at the top.

Answer:

The velocity of the motorboat after 6s is 24 m/s.

Explanation:

Given;

acceleration of the motorboat, a = 4.0 m/s²

initial velocity of the motorboat, u = 0

time of motion of the motorboat = 6s

Apply the following kinematic equation to determine the velocity of the motorboat after 6 ;

v = u + at

v = 0 + (4 x 6)

v = 24 m/s

Therefore, the velocity of the motorboat after 6s is 24 m/s.

Answer:

There is no particular relationship between the height and shoe size. But the shoe sizes in males is usually bigger than females. And the shoe size tends to get bigger when the person is taller.

Explanation: