Answers
Answer:
The answer is option C.
voltage (V) = Current( I ) × Resistance (R)
V = IR
I = V/ R
V = 10V R = 20Ω
I = 10/20 = 1/2
I = 0.50A
Hope this helps
Related Questions
At a temperature of 393 K, the pressure of a sample of nitrogen is 1.07 atm. What will the pressure be at a temperature of 478 K? (Assume constant volume)
Answers
Answer:
1.30atm
Explanation:
P1/T1 = P2/T2
1.07/393 = P2/478
Answer: the first one is correct
Explanation:
jhkfjfjgjgjjggj
If 50 ml of 1.00 M of H2SO4 and 50 ml of 2.0 M KOH are mixed what is the concentration of the resulting solutes?
Answers
Answer: [H2SO4] = 0.5M;
[KOH] = 1M
Explanation: Molarity is the solution concentration defined by:
molarity = [tex]\frac{mol}{L}[/tex] or M
To determine the concentration of the mixture, find how many mols of each compound there are in the mixture:
50 mL = 0.05L
H2SO4
1 mol/L * 0.05L = 0.05mol
KOH
2mol/L * 0.05L = 0.1 mol
The mixture has a total volume of:
V = 50 + 50 = 100 mL = 0.1 L
The concentration of the resullting solutes:
[H2SO4] = [tex]\frac{0.05}{0.1}[/tex] = 0.5 M
[KOH] = [tex]\frac{0.1}{0.1}[/tex] = 1 M
Concentration of H2SO4 is 0.5M while for KOH is 1M.
A sample of oxygen is collected over water at a total pressure of 692.2 mmHg at 17°C. The vapor pressure of water at 17°C is 14.5 mmHg. The partial pressure of the O2
Answers
Answer:
677.7 mmHg
Explanation:
The first empirical study on the behaviour of a mixture of gases was carried out by John Dalton. He established the effects of mixing gases at different pressures in the same vessel.
Dalton's law states that,the total pressure exerted by a mixture of gases is equal to the sum of the partial pressures of the individual gases present in the mixture of gases. When a gas is collected over water, the gas also contains some water vapour. The partial pressure of the gas will now be given as; total pressure of gas mixture - saturated vapour pressure of water (SVP) at that temperature.
Given that;
Total pressure of gas mixture = 692.2 mmHg
SVP of water at 17°C = 14.5 mmHg
Therefore, partial pressure of oxygen = 692.2-14.5
Partial pressure of oxygen = 677.7 mmHg
Covalent bonding occurs between two oxygen atoms to form O2. What's the partial charge on each oxygen atom in 02?
A. Both oxygen atoms have positive partial charge.
B. Both oxygen atoms have negative partial charge.
C. Both oxygen atoms have zero partial charge.
D. One oxygen atom has positive partial charge, and the other has negative partial charge.
Answers
Answer:
Both oxygen atoms have zero partial charge.
Explanation:
In covalent bonds, electrons are shared between the two bonding atoms. The shared electron pair of the covalent bond is positioned between the nuclei of the two bonding atoms.
A covalent bond may be formed between two or more elements of different electronegativities. When a difference in electro negativity exists between these atoms in a covalent bond, the molecule becomes polarized. The shared electron pair of the covalent bond becomes closer to the nucleus of the more electronegative atom (s). This more electronegative atom (s) becomes partially negative while the other atom becomes partially positive.
When the two bonding atoms are of equal electronegativities such that the electro negativity difference between the bonding atoms is zero, there is now no difference in electro negativity and no consequent partial charges.
Since the two oxygen atoms have the same electro negativity, there is no difference in electronegativity, hence there is no partial charge between the two oxygen atoms.
Answer:
Both oxygen atoms have zero partial charge.
Explanation:
Look up and record the boiling point of acetic acid, and explain why only some of it evaporates from the reaction mixture.
Answers
Answer:
Heating the mixture to a temperature above the boiling point of acetic acid, but below 100°C (the boiling point of water). The vapours from the acetic acid rise, and go into a tube. They are then condensed within the tube, and run off into a separate storage area. Because water can exist as a gas at pretty much any temperature above 0°C, it will result in an impure mixture, but repeatedly doing this will get the acetic acid to the desired purity.
A chemist observed an unknown Balmer Series decay through an emission of 410 nm. Using the experimental wavelength, determine the energy levels transition involved in the
emitted wavelength.
Answers
Answer:
Option D is correct.
n = 6 to n = 2
Explanation:
Like all waves emitted from the movement of electrons from one energy level to another, the wavelength (λ) is given by the equation involving Rydberg's constant
(1/λ) = Rₕ [(1/n₂²) - (1/n₁²)]
where Rₕ = 10973731.57 m⁻¹ = (1.0974 × 10⁷) m⁻¹
n₂ = principal quantum number corresponding to the final energy level of the electron = 2 (For Balmer Series)
n₁ = principal quantum number corresponding to the final energy level of the electron = ?
λ = 410 nm = (410 × 10⁻⁹) m
(1/λ) = (2.439 × 10⁶) m⁻¹
2.439 × 10⁶ = (1.0974 × 10⁷) [(1/2²) - (1/n₁²)]
0.25 - (1/n₁²) = (2.439 × 10⁶) ÷ (1.0974 × 10⁷) = 0.2222602562
(1/n₁²) = 0.25 - 0.2222602562 = 0.0277397438
n₁² = (1/0.0277397438) = 36.05
n₁ = 6
Hope this Helps!!!
A 3.00-g sample of an alloy (containing only Pb and Sn) was dissolved in nitric acid (HNO3). Sulfuric acid was added to this solution, which precipitated 2.93 g of PbSO4. Assuming that all of the lead was precipitated, what is the percentage of Sn in the sample? (molar mass of PbSO4 = 303.3 g/mol)
Answers
Answer:
33.3% of Sn in the sample
Explanation:
The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.
Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:
2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.
As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:
9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺
As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g
And the percentage of Sn in the sample is:
1.00g / 3.00g ₓ 100 =
33.3% of Sn in the sampleCalculate the molar mass of (NH4)3AsO4.
Answers
Answer:
193.07 g / mol
Explanation:
Molar mass of (NH₄)₃ = 3 * (14.01 + 4 * 1.01) = 54.15
As = 74.92 and O₄ = 4 * 16 = 64
Answer is 54.15 + 74.92 + 64 = 193.07
What is the [OH-] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution
Answers
Answer: The [tex][OH^-][/tex] of a solution is [tex]10^{-12}[/tex] M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]HCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{0.0912g}{36.5g/mol}=0.0025mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{0.0025\times 1000}{250}=0.01[/tex]
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl\rightarrow H^++Cl^{-}[/tex]
According to stoichiometry,
1 mole of [tex]HCl[/tex] gives 1 mole of [tex]H^+[/tex]
Thus [tex]0.01[/tex] moles of [tex]HCl[/tex] gives =[tex]\frac{1}{1}\times 0.01=0.01[/tex] moles of [tex]H^+[/tex]
Putting in the values:
[tex][H^+][OH^-]=10^{-14}[/tex]
[tex][0.01][OH^-]=10^{-14}[/tex]
[tex][OH^-]=10^{-12}[/tex]
Thus the [tex][OH^-][/tex] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M
The [OH-] of a solution is [tex]10^{12}[/tex] M.
What is Molarity?Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
M = n/ V..................(1)
where,
n = moles of solute
V = volume of solution in ml
Calculation for number of moles:
Moles of HCl = 0.0912 g/ 36.5 g/mol = 0.0025 mol
On substituting the values in equation 1:
M = n/ V
M= 0.0025*1000 / 250
M=0.01 M
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl---- > H^++Cl^-[/tex]
According to stoichiometry,
1 mole of HCl gives 1 mole of [tex]H^+[/tex]
Thus, 0.01 moles of HCl gives = 1 / 1 *0.01 = 0.01 mole of [tex]H^+[/tex]
On adding the values:
[tex][H^+][OH^-]=10^{14}\\\\(0.01)[OH^-]=10^{-14}\\\\OH^-=10^{-12}[/tex]
Thus, the [OH-] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M.
Find more information about pH here:
brainly.com/question/13557815
What is the product(s) of the reaction below?
2Al(s) + Fe2O3(s) Al2O3(s) + 2Fe(s)
A. Solid aluminum oxide and solid iron
B. Solid aluminum
C. Saturated aluminum oxide and saturated iron
D. Iron(III) oxide and aluminum oxide
Answers
Answer:
I would put A
Explanation:
A new substance is produced as a result of a chemical reaction in which bonds between the molecules of the reactant and product are broken and new bonds are formed. Here the products are Al₂O₃ and Fe. The correct option is A.
Chemical reactions are interactions between two or more molecules that result in the production of new products. Products, as opposed to reactants, are compounds that result from an interaction between two other substances.
The reactants are on the left, while the products that are created are on the right. A one-headed or two-headed arrow connects the reactants and products.
Thus the correct option is A.
To know more about reaction, visit;
https://brainly.com/question/34137415
#SPJ4
a soluation of acetone in water has a molarity of 2.422M and a density of 0.970 g/mL. Calculate the mole fraction
Answers
Answer:
[tex]x_{acetone}=7.970x10^{-3}[/tex]
Explanation:
Hello,
In this case, for the given molarity, we can assume a volume of 1 L of solution, to obtain the following moles of acetone:
[tex]n=0.422mol/L*1L=0.422mol[/tex]
Then, with the density of solution, we can compute the mass of the solution for the selected 1-L volume basis:
[tex]m_{solution}=1L*\frac{1000mL}{1L}*\frac{0.970g}{1mL}=970g[/tex]
After that, we compute the mass of water in the solution, considering the mass of acetone (molar mass = 58.08 g/mol):
[tex]m_{H_2O}=970g-0.422molAcetone*\frac{58.08g\ Acetone}{1mol\ Acetone} =945.49gH_2O[/tex]
Next, the moles of water:
[tex]n_{H_2O}=945.49g*\frac{1molH_2O}{18gH_2O} =52.53molH_2O[/tex]
Finally, the mole fraction:
[tex]x_{acetone}=\frac{n_{acetone}}{n_{acetone}+n_{H_2O}}=\frac{0.422mol}{0.422mol+52.53mol}\\ \\x_{acetone}=7.970x10^{-3}[/tex]
Regards.
What would the cathode be in a nickel and copper electrolytic cell
Answers
Answer:
d
Explanation:
The lock and key model and the induced fit model are two models of enzyme action explaining both the specificity and the catalytic activity of enzymes. Indicate whether each statement is part of the lock and key model, the induced fit model, or is common to both models.
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex
c. Enzyme active site has a rigid structure complementary
d. Substrate binds to the enzyme through noncovalent interactions
Answers
Answer:
"The active site of the enzyme has a complementary rigid structure" belongs to the key and lock system
"The conformation of the enzyme changes when it binds to the substrate so that the active site conforms to the substrate." belongs to the induced fit system.
"The substrate binds to the enzyme at the active site, forming an enzyme-substrate complex" belongs to both, that is, the key and lock system and the induced fit system.
"The substrate binds to the enzyme through non-covalent interactions" can belong to both enzyme systems.
Explanation:
Enzymatic key and lock systems bear this name because the enzyme at its site of union with the substrate has an ideal shape so that its fit is perfect, similar to a headbreaker, so once they are joined they are not It can bind another substrate to the enzyme, since they are generally associated with strong chemical bonds.
The shape of the enzyme's active site is a negative of what the shape of the substrate would be.
On the other hand, in the mechanism or enzyme system of induced adjustment, the enzyme has an active site that is where it binds with the substrate and another site where another chemical component binds, which when this chemical component binds this enzyme changes its morphology and becomes "active" to bond with your substrate.
This happens a lot in the inactive enzymes that are usually activated in digestive processes since the fact that these enzymes are constantly active would be dangerous, therefore the body takes the induced enzyme system as a control mechanism, where a molecule or chemical compound induces change morphological of an enzyme by means of the allosteric union so that it joins its substrate and catalyzes or analyzes it, depending on the enzymatic character of the enzyme.
Write the empirical formula
Answers
Answer:
[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]
Explanation:
[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]
What is the molarity of a solution that is 7.00% by mass magnesium sulfate and has a density of 1.071 g/mL?
Answers
Answer:
0.623 M
Explanation:
Step 1: Given data
Percent by mass (%m/m): 7.00 %Density of the solution (ρ): 1.071 g/mLMolar mass of magnesium sulfate: 120.37 g/molStep 2: Calculate the percent by volume (%m/v)
We will use the following expression.
[tex]\%m/v = \%m/m \times \rho = 7.00\% \times 1.071g/mL = 7.50g\%mL[/tex]
Step 3: Calculate the molarity
7.50 g of magnesium sulfate are dissolved in 100 mL of the solution. The molarity is:
[tex]M = \frac{7.50g}{120.37g/mol \times 0.100L } = 0.623 M[/tex]
Cual es la diferencia entre agua pesada y agua ligera a) el agua pesada contiene mas minerales que el agua ligera b) el agua ligera es liquida mientras el agua pesada es solida c) el agua ligera es agua purificada y el agua pesada es agua contaminada d) el agua pesada contiene mas elementos estearato de sodio
Answers
Answer:
d) El agua pesada contiene mas elementos
Explanation:
La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.
Answer:
....................
lllllllllllllllll
Explanation:ki
A solid white substance A is heated strongly in the absence of air. It decomposes to form a new white substance B and a gas C. The gas has exactly the same properties as the product obtained when carbon is burned in an excess of oxygen. Based on these observations, can we determine whether solids A and B and the gas C are elements or compounds?
Answers
Answer:
A, B and C are compounds
Explanation:
First of all, I need to establish that when carbon is burnt in excess oxygen, carbon dioxide is obtained as shown by this equation; C(s) + O2(g) ----> CO2(g).
Looking at the presentation in the question, A was said to be heated strongly and it decomposed to B and C. Only a compound can decompose when heated. Elements can not decompose on heating. Secondly, compounds usually decompose to give the same compounds that combined to form them. Compounds hardly decompose into their constituent elements.
Again from the information provided, the compound A is a white solid. This is likely to be CaCO3. It decomposes to give another white solid. This may be CaO and the gas was identified as CO2.
Hence;
CaCO3(s)--------> CaO(s) + CO2(g)
A compound consisting of atoms of small atomic mass is more likely to require what
Answers
Answer:
a lower temperature to liquefy
Explanation:
Resources Use the exothermic and endothermic interactive to classify the solution process for each solute. Exothermic solution process Endothermic solution process
KOH CaCl, NaCT NaOH NaNO, NH NO,
Answers
Answer:
Exothermic interractive are the following: NaOH, KOH, CaCl₂
Endothermic interactive are the following: NaCl, NH₄NO₃, NaNO₃
Explanation:
NaOH, KOH, and CaCl2 are exothermic reactants. NaCl, NH4NO3, and NaNO3 are endothermic interacting substances.
Endothermic reactions: what are they?Chemical processes that can release or absorb energy are referred to as endothermic. In endothermic reactions, more energy is used when bonds in the reactants are broken than is released when new bonds are formed in the products.
How do endothermic processes take place?When the temperature of the an isolated system drops while the surroundings of the a non-isolated system warm up, this is known as an endothermic response. The heat of reaction is generally positive in endothermic processes (qrxn>0).
To know more about endothermic reactions visit:
https://brainly.com/question/23184814
#SPJ2
the iupac name this compound
Answers
Answer:
It's HYDROXIDE
Explanation:
You do not call it as hydroxide ion because ion always have + or -
I hope this helps
HAVE A GOOD DAY!
Answer:
Tetranol
Explanation:
Since it consist of 4 carbons So the prefix is "Tetra"
=> It has an "OH" group attached to it so the functional group is "ALCOHOL".
For alcohols, the suffix is "-ol" so the name becomes
=> Tetranol
Which of the following would be useful for converting g/mol to g/L?
A. Mass percent
B. Avogadro's number
C. Molarity
D. Molar mass
Answers
Answer:
Molarity
Explanation:
The conversion of g/mol to g/L molarity can be used. Thus, option C is correct.
The g/mol has been the amount of solute present in a mole. The g/mol has been the molecular weight of the compound.
The g/L has been the mass of solute present in a L of solution. The g/L has the unit for density.
Molarity has been the moles of solute present in the liter of solution. It has been given as mol/L.
The product of g/mol and g/L gives the value of mol/L. Thus, to convert g/mol to g/L molarity can be used. Thus, option C is correct.
For more information about g/L refer to the link:
https://brainly.com/question/13153210
3. The density of acetic anhydride is 1.08 g/mL. How many moles of acetic anhydride are used in this experiment
Answers
Answer:
Number of moles = 0.1058 mol
Explanation:
Density = 1.08 g/mL
Volume = 10ml
Density = Mass / Volume
Mass = Density * Volume
Mass = 1.08 * 10 = 10.8g
The molar mass of acetic anhydride = 102.09 g/mol
Molar mass = Mass / Moles
Upon solving for moles;
Moles = Mass / Molar mass
Moles = 10.8 / 102.09 = 0.1058 mol
The moles of acetic acid used in the experiment has been 0.1058 mol.
Density has been defined as mass of a substance per unit volume. The density has been expressed as:
[tex]\rm Density=\dfrac{Mass}{Volume} [/tex]
The moles have been the mass of the substance with respect to the molar mass. The moles of a substance has been given as:
[tex]\rm Moles=\dfrac{Mass}{Molar\;mass} [/tex]
Computation for the Moles of Acetic AcidThe given sample of acetic acid has density = 1.08 g/ml
The volume of the sample used in the experiment has been 10 ml.
Substituting the values for the mass of acetic acid:
[tex]\rm 1.08=\dfrac{Mass}{10}\\ Mass=1.08\;\times\;10\;g\\ Mass=10.8\;g[/tex]
The mass of the acetic acid used has been 10.8 g.
The molar mass of acetic acid has been 102.09 g/mol.
Substituting the values for the moles of acetic acid:
[tex]\rm Moles=\dfrac{10.8}{102.09} \\ Moles=0.1058\;mol[/tex]
The moles of acetic acid used in the experiment has been 0.1058 mol.
Learn more about density, here:
https://brainly.com/question/14373997
The mathematics of combining quantum theory with wave motion of atomic particles is known as _____.
Answers
Combining quantum theory with wave motion of atomic particles is: Wave Mechanics
If an electromagnetic wave has a frequency of 4.5 x 10^18 Hz, what is its wavelength? The speed of light is 3 x 108 m/s.
Answers
Answer:
Wavelength, λ = 6.7 x 10^-11 m
Explanation:
Frequency and wavelength are inversely proportional to each other.
In this problem;
f = 4.5 x 10^18 Hz
wavelength, λ = ?
Speed of light, c = 3 x 108 m/s.
These variables are related by the following equation;
c = λ * f
Making λ subject of focus, we have;
λ = c / f
λ = 3 x 10^8 / 4.5 x 10^18
λ = 0.67 x 10^-10
λ = 6.7 x 10^-11 m
An unknown monoprotic acid HA with a concentration of 0.050 M has a pH of 2.3. Which of the following can we conclude?
A) It must be a strong acid.
B) It must be a weak acid.
C) A salt of its conjugate base would have no pH effect in solution.
D) Both A and C
E) None of the above
Answers
Answer:
B) It must be a weak acid.
Explanation:
If HA is a strong acid
[tex]HA\rightleftharpoons H^++A^-[/tex]
Now the pH value can be written as follows
[tex]pH=-log[H^+]\\pH=-log(5\times 10^{-2})\\pH=2\times log5\\pH=1.4[/tex]
But given that acid HA has 2.3 pH value.
Therefore we can say that HA is weak acid.
Thus the answer will be option (B).
B) It must be a weak acid.
If 500 mL of 2.0 M HCl is diluted with water to a volume of 1 liter, what is the molarity of the new solution?
Answers
Answer: 1 mole per L
Explanation:
(2M)(500mL)=(M)(1000mL)
1000=(M)(1000mL)
M=1
Taking into account the definition of dilution, if 500 mL of 2.0 M HCl is diluted with water to a volume of 1 liter, the molarity of the new solution is 1 M.
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.
Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vfwhere
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeFinal molarityIn this case, you know:
Ci= 2.0 MVi= 500 mLCf= ?Vf= 1 L= 1000 mLReplacing in the definition of dilution:
2.0 M× 500 mL= Cf× 1000 mL
Solving:
(2.0 M× 500 mL)÷ 1000 mL= Cf
1 M= Cf
In summary, if 500 mL of 2.0 M HCl is diluted with water to a volume of 1 liter, the molarity of the new solution is 1 M.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ2
Use the reaction I2(s) I2(g), H = 62.4 kJ/mol, S = 0.145 kJ/(molK)
At what temperature is the reaction at equilibrium?
A.157K
B.430K
C.0.002K
D.62K
Answers
Answer: B. 430 K
Explanation:
According to Gibb's equation:
[tex]\Delta G=\Delta H-T\Delta S[/tex]
[tex]\Delta G[/tex] = Gibbs free energy
[tex]\Delta H[/tex] = enthalpy change = +62.4 kJ/mol
[tex]\Delta S[/tex] = entropy change = +0.145 kJ/molK
T = temperature in Kelvin
[tex]\Delta G[/tex] = +ve, reaction is non spontaneous
[tex]\Delta G[/tex] = -ve, reaction is spontaneous
[tex]\Delta G[/tex] = 0, reaction is in equilibrium
[tex]\Delta H-T\Delta S=0[/tex] for reaction to be spontaneous
[tex]T=\frac{\Delta H}{\Delta S}[/tex]
[tex]T=\frac{62.4kJ/mol}{0.145kJ/molK}=430K[/tex]
Thus the Reaction is spontaneous when temperature is 430 K.
Answer:
430 K
Explanation:
i just took the test on a pex :)
The force that opposes drag and is powered by combustion reactions in the
engine is
Answers
Answer:
Thrust.
Explanation:
hope this helps you :)
Answer:
thrust
Explanation:
A gas contained in a steel tank has a volume of 1.5 L at a temperature of 390 K. What will be the volume when the temperature changes to 1470C? Group of answer choices
Answers
Answer:
1.5 L
Explanation:
If the gas is contained in a steel tank, the volume will remain constant when the temperature changes.
The volume will be 1.5 L.
Match the words in the below to the appropriate blanks in the sentences.
1. When comparing the two elements A s and S n , the more metallic element is ______based on periodic trends alone.
2. When comparing the two elements G e and S b , the more metallic element is ________ based on periodic trends alone.
A. Ge
B. Pb
C. Sb
D. impossible to determine
E. K
Answers
Answer:
Sn and Ge
Explanation:
To obtain the more metallic element, we compare the group in which both elements are. Generally the element with the lower ionzation energy is he more metallic one.
Ionization energy increases fro left to right across a period. Ionization energy decreases down the group.
1. When comparing the two elements A s and S n , the more metallic element is ______based on periodic trends alone.
Sn has a lower ionization energy so it is the more metallic one.
2. When comparing the two elements G e and S b , the more metallic element is ________ based on periodic trends alone.
Ge has a lower ionizaiton energy compared to Sb. So it is more metallic element than Sb.