Answer:B) The Skin and The Skin cells
Explanation:
Hope this helped
The Lewis dot notation for two atoms is shown.
Mg is written with two dots on its right. O is written on the right of Mg. There are six dots around O. Two arrows point from the dots near Mg to O.
What is represented by this notation?
Mg gains two protons from O.
Mg donates two protons to O.
Mg gains two electrons from O.
Mg donates two electrons to O.
Answer:
Mg donates two electrons to O
Explanation:
Lewis dot notation uses dots and crosses to represent valence electrons on atoms.
Magnesium is a metal and would donate or lose electrons during bonding.
Oxygen is a non metal and would gain electrons during bonding.
The correct option is;
Mg donates two electrons to O
What is the density of an object with a mass of 8.7 g and a volume of 8.6 cm??
Answer:
1.01 grams/ cm^3
Explanation:
because that's just how it is
What is Kb for N2H4 if the pH of a 0.158M solution of N2H5Cl is 4.5?
Answer:
Kb[tex]= 1.58 * 10^{-6}[/tex]
Explanation:
The correct question is
What is Kb for N2H4 if the pH of a 0.158M solution of N2H5Cl is 4.5?
Solution-
N2H4Cl hydrolyses on addition of water
The reaction equation is as follows -
N2H4+ + H2O ----> N2H4 + H3O+
[tex]Ka = \frac{K_w}{K_b} = \frac{10^{-14}}{K_b}[/tex]
pH [tex]= 4.5[/tex]
[tex][H+] = 10^{-pH} = 10^{-4.5}[/tex]
[tex]K_b= \frac{10^{-14} }{K_b} = \frac{Y_2}{0.158} \\K_b= \frac{(10^{-4.5})^2}{0.158}\\=> Kb = 0.158 * 10-14 /(10-4.5)2[/tex]
Kb[tex]= 1.58 * 10^{-6}[/tex]
How did American prepare for and fight for the France battle
Answer:
their warfare had changed dramatically
Answer:
Explanation:
They first tried to build there army. They did this by passing the Selective Service Act. ... In the next 18 months about 4 million men and women joined the army, but then the army had to be educated.
C3H8 (g)+ 502 (g) 3CO2 (g) + 4 H2O (g) + 531 kcal
Answer:
Exotérmica.
Explanation:
¡Hola!
En este caso, dado que la mayoría de reacciones de combustión son exotérmicas, al generar calor en los productos, es posible inferir que esta reacción, referida a la combustion de metano es exotérmica debido a lo anteriormente mencionado, ya que el término de energía de reacción, 531 kcal, está al lado de los productos, lo que quiere decir que es energía generada.
¡Saludos!
When N,N-Dimethylaniline is treated with bromine, ortho and para products are observed. However, when N,N-Dimethylaniline is treated with a mixture of nitric and sulfuric acid, only the meta product is observed. Explain these results. (Hint: what can happen to the nitrogen atom in the presence of the strong acids
Answer:
See explanation below
Explanation:
To get a better understanding watch the picture attached.
In the case of the reaction with Bromine, the -N(CH₃)₂ is a strong ring activator, therefore, it promotes a electrophilic aromatic sustitution, so, in the mechanism of reaction, the lone pair of the Nitrogen, will move to the ring by resonance and activate the ortho and para positions. That's why the bromine wil go to the ortho and para positions, mostly the para position, because the -N(CH₃)₂ cause a steric hindrance in the ortho position.
In the case of the reaction with HNO₃/H₂SO₄, the acid transform the -N(CH₃)₂ in a protonated form, the anilinium ion, which is a deactivating of the ring, and also a strong electron withdrawing, so, the electrophile will go to the meta position instead.
Hope this helps.
What is the theoretical yield of SO3 produced by 8.96 g of S?
Answer: Theoretical yield of [tex]SO_3[/tex] produced by 8.96 g of S is 33.6 g
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} S=\frac{8.96g}{32g/mol}=0.28moles[/tex]
The balanced chemical equation is:
[tex]2S+3O_2\rightarrow 2SO_3[/tex]
According to stoichiometry :
2 moles of [tex]S[/tex] produce = 3 moles of [tex]SO_3[/tex]
Thus 0.28 moles of [tex]S[/tex] will produce=[tex]\frac{3}{2}\times 0.28=0.42moles[/tex] of [tex]SO_3[/tex]
Mass of [tex]SO_3=moles\times {\text {Molar mass}}=0.42moles\times 80g/mol=33.6g[/tex]
Thus theoretical yield of [tex]SO_3[/tex] produced by 8.96 g of S is 33.6 g
Which statement best defines the resistance of an electric circuit?
it limits the amount of electrical energy that can pass through a circuit.
It is the amount of electrical energy that is available in a circuit
It is the measurement of the rate of electrical energy in a circuit.
It describes how much electrical energy passes in a circuit.
Answer:
electric circuits can be dangerous
Explanation:
Answer:
The first one
it limits the amount of electrical energy that can pass through a circuit.
Why is petrified wood considered a fossil?
Petrified wood was part of a plant that has been changed into rocks.
Petrified wood is can be burned to make create energy.
Petrified wood is dense like a fossil.
Petrified wood contains minerals that are only found in fossils.
Answer:
Petrified wood contains minerals that are only found in fossils.
Explanation:
learned it in school (promise)
Help plz :( Convert 48,000 seconds into hours. (Two step problem, use two conversion factors in a row)
Answer:
13.3 h
Explanation:
Step 1: Given data
Time (t): 48,000 seconds
Step 2: Convert "t" from seconds to minutes
We will use the conversion factor 1 min = 60 s.
48,000 s × 1 min/60 s = 800 min
Step 3: Convert "t" from minutes to hours
We will use the conversion factor 1 h = 60 min.
800 min × 1 h/60 min = 13.3 h
To sum up, 48,000 seconds is equal to 13.3 hours.
One mole of a metallic oxide reacts with one mole of hydrogen to produce two moles of the pure metal
and one mole of water. 5.00 g of the metallic oxide produces 2.32 g of the metal. What is the metallic
oxide? (Use molar masses)
Answer:
The metallic oxide is Li₂O
Explanation:
Let the metallic oxide be M₂O
Thus;
M₂O + H₂ = 2M + H₂O
Molar mass of M₂O = (2x + 16)
We assumed Molar mass of M to be x.
We are told that 5.00 g of the metallic oxide produces 2.32 g of the metal.
By proportion, we can write the following;
5g of M₂O × (1 mole of M₂O/(2x + 16)) × (2 moles of M/1 mole of M₂O) = 2.32 g of M × 1 mole of M/x g of M
This cancels out to give us;
10/(2x + 16) = 2.32/x
Cross multiply to get;
10x = 2.32(2x + 16)
10x = 4.64x + 37.12
10x - 4.64x = 37.12
5.36x = 37.12
x = 37.12/5.36
x = 6.925 g/mol
The metal with a molar mass closest to this value of x is Lithium which has a molar mass of 6.94 g/mol
Thus the metal is Lithium and as such the metallic oxide is Li₂O
Draw a mechanism for the reaction of methanol with sodium amide. In the box to the left, draw any necessary curved arrows. Show the products of the reaction in the box to the right. Include any nonzero formal charges and all lone pairs of electrons. Finally, check the box to indicate which side of the reaction is favored at equilibrium.
Answer:
See explanation
Explanation:
When sodamide reacts with methanol, the following equilibrium is set up;
CH3OH(aq) + NH2-(aq) ⇄ CH3O-(aq) + NH3(aq)
In the reaction, the sodamide acts as a base that abstracts a proton from methanol to yield the conjugate base of methanol which is the methoxide ion.
The forward reaction is favoured at equilibrium.
We use less than 1% of the water on Earth for
Answer: drinking, bathing.
Explanation:
It is common to mix polar solvents (e.g., acetone) with non-polar solvents (e.g., hexane) to obtain an eluting solvent of intermediate polarity. Would it be appropriate to use a water-DMSO mixture
Answer:
No, it is not appropriate to mix water and DMSO
Explanation:
We have to realize that DMSO is a highly polar solvent and water is a highly polar solvent. The question explicitly says that our target is to produce a solvent of intermediate polarity.
We can only do this by mixing a polar and a nonpolar solvent. We have been given the example of the mixture of acetone/hexane which is quite a perfect mixture.
Thus, it is inappropriate to mix DMSO and water.
The water-DMSO mixture has a high polarity and is not appropriate for intermediate polarity solution.
The interactions between solute-solvent result in the solubility and the polarity of the solution. The polar and non-polar solvents result in intermediate polarity of the solution.
What is the polarity of Water-DMSO solute?The water and DMSO both are highly polar in nature. The addition of polar DMSO to polar water results in the dipole-dipole interaction between the molecules.
The interactions result in the solubility of the solute with solvent. However, the polarity of the solution will be high as both the molecules gave synergistic mixture polarity to the solution.
Thus, to obtain the solution of intermediate polarity, water-DMSO mixture is not appropriate.
Learn more about non-polar, here:
https://brainly.com/question/1716818
How are acids and alkalis
similar?
Answer:h
Explanation:
Answer:
Acids and alkalis both contain ions. Acids contain lots of hydrogen ions, which have the symbol H+. Alkalis contain lots of hydroxide ions, symbol OH-. Water is neutral because the number of hydrogen ions is equal to the number of hydroxide ions.
If an object gets smaller due to a change in state, what happens to its volume? How will this affect its density?
Answer:
the volume of a object will go down but the density stays the same
In NMR: The size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
1. True
2. False
Answer:
True
It is true that he size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
Explanation:
With the increase in the valence angle the coupling constant reduces. The distance between the carbon atoms also influence coupling constant. With increase in bond length, the coupling constant decreases. Also the more an atom is electronegative, the lesser is the coupling constant
Thus, it is true that he size of coupling constants (J values) depend on three factors:
a. Through bond distance between the protons.
b. Angle between the two C-H bonds.
c. Electronegative substituents.
For 100.0 mL of a solution that is 0.040M CH3COOH and 0.010 M CH3COO, what would be the pH after adding 10.0 mL 50.0 mM HCl?
Answer:
The pH of the buffer is 3.90
Explanation:
The mixture of a weak acid CH3COOH and its conjugate base CH3COO produce a buffer that follows the equation:
pH = pKa + log [A-] / [HA]
Where pH is the pH of the buffer, pKa is the pKa of acetic acid (4.75), and [A-] could be taken as the moles of the conjugate base and [HA] the moles of thw weak acid.
To solve this question we need to find the moles of the CH3COOH and CH3COO- after the reaction with HCl:
CH3COO- + HCl → CH3COOH + Cl-
The moles of CH3COO- are its initial moles - the moles of HCl added
And moles of CH3COOH are its initial moles + moles HCl added
Moles CH3COO-:
Initial moles = 0.100L * (0.010mol / L) = 0.00100moles
Moles HCl = 0.010L * (0.050mol / L) = 0.000500 moles
Moles CH3COO- = 0.000500 moles
Moles CH3COOH:
Initial moles = 0.100L * (0.040mol / L) = 0.00400moles
Moles HCl = 0.010L * (0.050mol / L) = 0.000500 moles
Moles CH3COO- = 0.003500 moles
pH is:
pH = 4.75 + log [0.000500] / [0.00350]
pH = 3.90
The pH of the buffer is 3.90
The pH of the buffer after addition of 10.0 mL of 50.0mM HCl is 3.90
What is the Henderson-Hasselbach equation?The Henderson-Hasselbach equation is given as:
pH = pKa + log [A-] / [HA]where
pKa of acetic acid (4.75), [A-] is moles of the conjugate base[HA] the moles of thw weak acid.How to determine the moles of CH3COO- and CH3COOHThe formula for calculating number of moles is:
Moles = concentration × volumeThe equation of the reaction is given below:
CH3COO- + HCl → CH3COOH + Cl-
moles of CH3COO- = initial moles - moles of HCl added
moles of CH3COOH = initial moles + moles HCl added
Moles CH3COO-
Molarity = 0.010 M
volume = 100 mL = 0.100 L
Initial moles = 0.100 L * 0.010 M = 0.001 moles
Moles HCl = 0.010L * 0.050 M= 0.0005 moles
Moles CH3COO- = 0.001 - 0.0005 moles
Moles of CH3COO- = 0.000500 moles
Moles CH3COOH:
Molarity = 0.040 M
volume = 100 mL = 0.100 L
Initial moles = 0.100L * (0.040mol / L) = 0.00400moles
Moles HCl = 0.010L * (0.050mol / L) = 0.000500 moles
Moles CH3COO- = 0.004 - 0.0005 moles
Moles CH3COO- = 0.003500 moles
Substituting the calculated values:
pH = 4.75 + log [0.000500] / [0.00350]
pH = 3.90
Therefore, the pH of the buffer after addition of the 10.0 mL 50.0mmHg HCL is 3.90
Learn more about about buffers and pH at: https://brainly.com/question/11851669
Calculate the [H+]
and pH of a 0.000295 M
butanoic acid solution. Keep in mind that the a
of butanoic acid is 1.52×10-5
[H⁺]=6.696 x 10⁻⁵
pH = 4.174
Further explanationGiven
The concentration of 0.000295 M (2.95 x 10⁻⁴ M) butanoic acid solution
Required
the [H+] and pH
Solution
Butanoic acid is the carboxylic acid group. Carboxylic acids are weak acids
For weak acid :
[tex]\tt [H^+]=\sqrt{Ka.M}[/tex]
Input the value :
[H⁺]=√1.52 x 10⁻⁵ x 2.95 x 10⁻⁴
[H⁺]=6.696 x 10⁻⁵
pH = - log [H⁺]
pH = - log 6.696 x 10⁻⁵
pH = 5 - log 6.696
pH = 4.174
Which of the following is not an example of potential energy? Group of answer choices electrical energy, chemical energy, gravitational energy, elastic energy.
PLS HELP FAST
Answer: The one listed below that's NOT an example of potential energy is mechanical energy. Mechanical energy is categorized as a kinetic energy with light, sound, and thermal/heat energy.
HOPE THIS HELPS
The energy that a body possesses as a result of its position with relation to other bodies, internal tensions, electric charge, and other considerations . Mechanical energy is not an example of potential energy.
What is potential energy ?Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases.
Although a force must be applied to an object in order for it to store potential energy, potential energy is technically stored inside matter.
The potential energy must be released, despite the fact that the energy is held in the object's mass due to gravity or elastic forces.
Thus, Mechanical energy is not an example of potential energy.
To learn more about potential energy refer the link below;
https://brainly.com/question/24284560
#SPJ2
cos(A)+cos(2A)+cos(3A)=0 is not an identity
Answer:
this is the required answer look it once
When an oxidant is present, vitamin C can be converted to a product described as (5R)-5-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy-furan-2,3,4(5H)-trione, which retains the furan-based nomenclature of vitamin C and describes the hydrogen placement at atom 5 of the ring. Which of the following statements best describes this vitamin C derivative?A) Vitamin C is reduced to yield a furan ring with 4 carbonyl groups and no double bonds.B) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and 1 double bond.C) Vitamin C is reduced to yield a furan ring with 1 carbonyl group and no double bonds.D) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and no double bonds
Answer:
D) Vitamin C is oxidized to yield a furan ring with 3 carbonyl groups and no double bonds
Explanation:
We can tell that the compound " (5R)-5-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy-furan-2,3,4(5H)-trione " has 3 carbonyl groups due to it having "trione" in the name (and it lacking other carbonyl group names, like amide or carboxylic acid).
As there is no "-ene" part of the name referencing a double bond, the only option left is option D).
How many moles are there in 6.33x10^23 molecules of NH3?
A 25 liter balloon holding 1.5 moles of carbon dioxide leaks. If we are able to determine that 0.9 moles of carbon dioxide escaped before the container could be sealed, what is the new volume of the container?
Answer:
10 Litre
Explanation:
Given that ::
v1 = 25L ; n1 = 1.5 mole ; v2 =? ; n2 = (1.5-0.9) = 0.6 mole
Using the relation :
(n2 * v1) / n1 = (n2 * v2) / n2
v2 = (n2 * v1) / n1
v2 = (0.6 mole * 25 Litre) / 1.5 mole
v2 = 15 / 1.5 litre
v2 = 10 Litre
can someone help me with this?
Answer:
The growth of any plant is controlled by many factor and it depends on them.
Explanation:
The words are sorted according to their genetic factors and the environment factors by the category on which they effect and impact the growth of a plant.
Genetic factor :
Waxy leaves, bad tasting leaves, disease, leaf structure, types of stem, plant structure, reproduction, types of roots.
Environment factor : sunlight, drought, fire, flood, heat wave, insects, wind, space, pH of soil, temperature, pollution, terrain, soil conditions, lack of air.
explain the 3 ways the elements were formed and which elements were formed in each method. (Big Bang, Stellar, And Supernova Nucleosynthesis)
Answer:
See explanation
Explanation:
Big Bang: During the big bang, elements were formed by the squeezing together of light nuclei. Hydrogen atoms were fused together to make helium, lithium and other light weight elements.
Stellar Nucleosynthesis: Stellar nucleosynthesis is the process by which elements are created within stars by combining the protons and neutrons together from the nuclei of lighter elements(Thoughtco). In the stars, hydrogen may be fused to give helium, lithium and other elements lighter than iron.
Supernova Nucleosynthesis: A supernova is a process in which a star releases a large amount of energy together with neutrons, hence elements that are heavier than iron, like uranium and gold, can be produced in the process.
What do you call the new material that are created in chemical
Which bond will each pair of elements form?
Explanation: Sodium is a metal with a low electronegativity it will form an ionic bond with a non metal with a high electronegativity.
Both Florine and Sulfur are non metals with high electronegativity.
Neon is a noble gas family VIII A and normally doesn't form any bonds at all.
MARK ME BRAINLIST
Which group of elements is listed in order of decreasing size? O oxygen, nitrogen, carbon, boron O xenon, krypton, argon, neon O carbon, silicon, germanium, tin O lead, thallium, mercury, gold
Answer:
oxygen, nitrogen, carbon, boron
Explanation:
Which of the following methods would best model how the mountains formed?
potential energy
potential energy
kinetic energy
kinetic energy
electrical energy
electrical energy
chemical energy
Answer:
Potential energy. Kinetic energy can be stored. ... If we drop the object from the shelf or release the spring, that potential energy is converted back into kinetic energy. Kinetic energy can also be transferred from one body to another in a collision, which can be elastic or inelastic.