If 65 kW is to be transmitted over two 0.100 ohm lines, estimate how much power is saved if the voltage is stepped up from 120 V to 1200 V
Answer: 5.91kw
Explanation:
given data:
power = 65kw
voltage stepped up = 120v t0 1200
R 0.100
Solution:
when the it is stepped to 120v
[tex]P = VI \\65000/ 120I\\ I = 541.7A\\[/tex]
power loss
[tex](I^{2} )R*2\\= (541.7^{2})0.100*2\\= 58536.2w[/tex]
when it is stepped to 1200v
[tex]\frac{65000}{1200} \\ I = 54.17A\[/tex]
[tex](I^{2} )R*2\\= (54.17^{2})0.100*2\\= 586.9w[/tex]
total power saved
[tex]= 65kw - 58.5kw - 0.59kw\\= 5.91kw[/tex]
A diffraction pattern is formed on a screen 150 cm away from a 0.500-mm-wide slit. Monochromatic 546.1-nm light is used. Calculate the fractional intensity I/Imax at a point on the screen 4.10 mm from the center of the principal maximum.
Solution :
The expression for the intensity of light is given by :
[tex]$I=I_{max}\left(\frac{\sin \frac{\pi a \sin \theta}{\lambda}}{\frac{\pi a \sin \theta}{\lambda} }\right)^2$[/tex]
For a small angle, θ
sin θ = tan θ
[tex]$=\frac{y}{L}$[/tex]
Therefore the above equation becomes,
[tex]$I=I_{max}\left(\frac{\sin \frac{\pi a y}{\lambda L}}{\frac{\pi a y}{\lambda L} }\right)^2 $[/tex]
The given data is
λ = 546.1 nm
L = distance between the slit and the screen = 140 cm
= 1.40 m
a = width of the slit
= [tex]$0.50 \times 10^{-3} \ m$[/tex]
Therefore,
[tex]$I=I_{max}\left(\frac{\sin \frac{\pi \times 0.50 \times 10^{-3} \times 4.10 \times 10^{-3}}{546.1 \times 10^{-9} \times 1.20}}{\frac{\pi \times 0.50 \times 10^{-3} \times 4.10 \times 10^{-3}}{546.1 \times 10^{-9} \times 1.20} }\right)^2 $[/tex]
[tex]$=\left(\frac{0.170}{9.82}\right)^2$[/tex]
[tex]$= 2.89 \times 10^{-4} \ I_{max}$[/tex]
Therefore the fractional intensity is [tex]$\frac{I}{I_{max}}= 2.89 \times 10^{-4} $[/tex]
12 ounces of beer plus 12 ounces of wine plus 3 ounces of liquor = how
many "drinks"?
6 drinks
7 drinks
12 drinks
PLS HURRY
Answer:
12 ounces of beer plus 12 ounces of wine plus 3 ounces of liquor are equivalent to 6 drinks.
Explanation:
In the United States, a standard "drink" of beer has 12 ounces, a standard "drink" of wine has 5 ounces and standard drink of liquor has 1.5 ounces. Then, we obtain the quantity of drinks by dividing the total volume of each drink by its respective unit volume and summing each term. That is:
[tex]N = \frac{12\,oz}{12\,\frac{oz}{dr} }+\frac{12\,oz}{5\,\frac{oz}{dr} }+\frac{3\,oz}{1.5\,\frac{oz}{dr} }[/tex]
[tex]N = 1\,dr+2.4\,dr+2\,dr[/tex]
[tex]N = 5.4\,dr[/tex]
[tex]N = 6\,dr[/tex]
12 ounces of beer plus 12 ounces of wine plus 3 ounces of liquor are equivalent to 6 drinks.
What is the final velocity of an object that starts from rest and accelerates uniformly at 4
m/s2 over a distance of 8 m?
Answer:
8m/s
Explanation:
Given parameters:
Initial velocity = 0m/s
Acceleration = 4m/s²
Distance = 8m
Unknown:
Final velocity = ?
Solution:
To solve this problem, we use the right motion equation and find the unknown.
The right motion equation to solve this problem is given as :
v² = u² + 2aS
v is the final velocity
u is the initial velocity
a is the unknown acceleration
S is the distance
Now insert the parameters and solve;
v² = 0² + 2 (4) (8)
v² = 64
v = 8m/s
Which has more momentum, a 2000 lb car moving at 100 km/hr or a 4000 lb truck moving at 50 km/hr ?
Answer:
The truck and car have the same momentum.
Explanation:
[tex]m_1[/tex] = Mass of car = [tex]2000\ \text{lb}=2000\times0.45359237\ \text{kg}[/tex]
[tex]v_1[/tex] = Velocity of car = [tex]\dfrac{100}{3.6}\ \text{m/s}[/tex]
[tex]m_2[/tex] = Mass of truck = [tex]4000\times0.45359237\ \text{kg}[/tex]
[tex]v_2[/tex] = Velocity of truck = [tex]\dfrac{50}{3.6}\ \text{m/s}[/tex]
Momentum of car
[tex]p_1=m_1v_1\\\Rightarrow p_1=2000\times0.45359237\times \dfrac{100}{3.6}\\\Rightarrow p_1=25199.58\ \text{kg m/s}[/tex]
Momentum of the truck
[tex]p_2=m_2v_2\\\Rightarrow p_2=4000\times0.45359237\times \dfrac{50}{3.6}\\\Rightarrow p_2=25199.58\ \text{kg m/s}[/tex]
Both the truck and car have the same momentum of [tex]25199.58\ \text{kg m/s}[/tex].
Energy stored because of an object's height above the Earth's surface is_____energy.
nuclear
gravitational
electrical or chemical
Two forces of 50 N and 30N respectively, are acting on an object. Find the net force (in N) on the object if
A) the forces are acting in the same direction.. B) Together, forces are acting in opposite directions
Answer:
A) 80 N
B) 20 N
Explanation:
A) If the forces acting are in the same direction, then the net force will be a sum of both so many faces..
Thus;
ΣF = 50 + 30
ΣF = 80 N
B) If the forces are acting in the in opposite directions with the larger force pointing in the positive y-axis then, the net force is;
ΣF = 50 - 30
ΣF = 20 N
if a certain car, going with speed v1, rounds a level curve with a radius r1, it is just on the verge of skidding. if its speed is now doubled, the radius of the tightest curve on the same road that it can round without skidding is:
Answer:
The correct answer is 4R1
Explanation:
According to the given scenario ,the radius of the tightest curve on the same road without skidding is as follows:
As we know that
Centeripetal Acceleration is
= v^2 ÷ r
In the case when velocity becomes 2 times so the r would be 4 times
So, the radius of the tightest curve on the same road without skidding is 4R1
A wire is carrying current vertically downward. What is the direction of the force due to Earth's magnetic field on the wire?
A wire is carrying current vertically downward.
What is the direction of the force due to Earth's magnetic field on the wire?
a) horizontally towards the east
b) horizontally towards the west
c) horizontally towards the south
d) horizontally towards the north vertically upward
Answer: The correct option is A ( horizontally towards the east)
Explanation:
Magnetic field is a region around a magnet or a current- carrying conductor, where a magnetic force is experienced. The magnetic effect of electric current was first discovered in the early 1820 by Oersted. Using a wire that had current flowing through it and a pivoted magnetic needle, he discovered that the direction of deflection depended on the direction of the current and whether the wire was above or below the needle.
From the way the needle turns when current when current carrying wire is held parallel to it, he therefore concluded that:
--> a current has magnetic field all round it,
--> the magnetic field is in a direction perpendicular to the current.
The above discovery was now modified in Fleming's left hand rule which states that when conductor carrying current is placed in a magnetic field, the conductor will experience a force perpendicular to both the field and the flow of current.
Therefore from the question, a vertical wire carrying current in DOWNWARD direction is placed in a HORIZONTAL magnetic field directed to the NORTH. The direction of the force on the wire is to the EAST.
A diver 50 m deep in 10∘C fresh water exhales a 1.0-cm-diameter bubble. What is the bubble's diameter just as it reaches the surface of the lake, where the water temperature is 20∘C?
Answer:
18.2mm
Explanation:
D = 50m
T1 = 10+273 = 283K
T2 = 20+273 = 293K
R1 = 5x10^-3
Absolute pressure at 50m
P1 = pA + pwateer x g x d
= 101000+ 1000x9.81x50
= 591500pa
New volume of bubble
= P1v1/T1 = p2v2/T2
= 125x10^-9 x 591500x293/101000*283
= 757.9x10^-9m³
R2 = 9.2x10^-3
D2 = 18.2mm
Or 1.82cm
Thomas the Tank Engine (a train) is going 80 m/s and slows down to 30 m/s over a period of 30s. What is his deceleration? Acceleration= (final velocity-initial velocity)/ time A. -1.67 m/s/s B. 0.67 m/s/s C. -50 m/s/s D. 50 m/s/s
Answer: D
Explanation:
a 1220 kg automobile travels at 75 m/s. what net work would be required to bring it to a stop
Answer:
W = - 3431250 [N]
Explanation:
In order to solve this problem, we must use the theorem of work and energy conservation. This theorem tells us that the initial mechanical energy of a body plus the work done on this body must be equal to the final mechanical energy of the body. We must remember that the mechanical energy of a body is equal to the sum of kinetic energies plus potential energy plus elastic energy.
In this problem, we only have kinetic energy.
[tex]E_{1}+W_{1-2}=E_{2}\\where:\\E_{1}=E_{pot}+E_{kine}+E_{elas}\\E_{pot} = 0\\E_{elas}=0\\E_{kine}=\frac{1}{2} *m*v^{2}[/tex]
And we have:
m = mass = 1220 [kg]
v = velocity = 75 [m/s]
As the carriage stops the final kinetic energy is zero.
Now replacing:
[tex]\frac{1}{2} *1220*(75)^{2} +W_{1-2}=0\\W_{1-2}= - 3431250[N][/tex]
Note: The negative force means that the force has to be carried out by the carriage. That is, no external force acts on the car to stop it.
The water drops fall at regular intervals from a tap 5 m above the ground. The third drop is leaving the tap at the instant the first touches the ground. How far above the ground is the second drop at that instant?
I will mark brainliest
Answer:
The second drop is 3.75 m above the ground
Explanation:
Free Fall Motion
A free-falling object falls under the sole influence of gravity without air resistance.
If an object is dropped from rest in a free-falling motion, it falls with a constant acceleration called the acceleration of gravity, which value is [tex]g = 9.8 m/s^2[/tex].
The distance traveled by a dropped object is:
[tex]\displaystyle y=\frac{gt^2}{2}[/tex]
If we know the height h from which the object was dropped, we can find the time it takes fo hit the ground:
[tex]\displaystyle t=\sqrt{\frac{2y}{g}}[/tex]
When the first drop touches the ground there are two more drops in the air: the second drop still traveling, and the third drop just released from the tap.
The total time taken for the first drop to reach the ground is:
[tex]\displaystyle t_1=\sqrt{\frac{2*5}{g}}[/tex]
[tex]t_1 = 1.01\ s[/tex]
Half of this time has taken the second drop to fall:
[tex]t_2 = 1.01\ s/2=0.505\ s[/tex]
It has fallen a distance of:
[tex]\displaystyle y_2=\frac{9.8(0.505)^2}{2}[/tex]
[tex]y_2 = 1.25\ m[/tex]
Thus its height is:
h = 5 - 1.25 = 3.75
The second drop is 3.75 m above the ground
you pick up a 3.8 kg can of paint from the ground a lift it to a height of 1.4 m. you hold the can stationary for half a minute, waiting for a friend on a ladder to take it. how much work do you do duting this time (when the can of paint is stationary)?
Answer:
No work
Explanation:
During the time of holding the can stationary, no work is being done by the person carrying the can.
The can is simply at rest.
Work is done when a force is applied to move a body through a certain distance.Work done = force x distance
In the instance given in this problem, only when the paint was lifted up is work done.
When the paint is stationary and being supported by the person, no work is done.
Plz help
Fill in the blank with the correct observation from the simulation.
As the days go on, the distance that the moon is from the sun in the night sky
A. Stays the same
B. Decreases
C. Increases
Starting at New Moon, The visual distance increases for about 2 weeks, then decreases for about the next 2weeks, until the next New Moon.
On the average, it changes by about 12° per day.
Why does a stop sign appear red?
Answer:
because it’s suppose to be red like a stop light.
Explanation:
So it tells you to stop
2
Look at the circult dlagram.
Direction
of current
Battery
Bulb-
What type of circuit is shown?
A. open series circult
B. closed series circuit
C. open parallel circult
D. closed parallel circult
The direction of the current from the positive to the negative battery terminals and the fact that the bulbs are connected in parallel to each other suggests that this circuit is a Closed Parallel Circuit. The correct option is D.
What is the difference between open and closed circuits?An open circuit and a closed circuit are two types of electrical circuits that describe the flow of electrical current through a circuit.
An open circuit is a circuit in which there is a break in the path of the current, meaning that the current cannot flow through the circuit. In an open circuit, the switch is in the "off" position or there is a broken wire, and so no electrical current can flow through the circuit. This means that there is no voltage or electrical energy being transferred from the source to the load.
On the other hand, a closed circuit is a circuit in which there is a complete path for the current to flow through, meaning that the current can flow through the circuit. In a closed circuit, the switch is in the "on" position, and there is a continuous path for the current to flow from the source to the load and back to the source. This means that there is voltage and electrical energy being transferred from the source to the load.
Here in this question,
The direction of the current from the positive to the negative battery and the fact that the bulbs are connected in parallel to each other suggests that this circuit is a Closed Parallel Circuit.
In a closed parallel circuit, the components are connected in parallel to each other, meaning that they are connected to the same two points in the circuit and the current has multiple paths to flow through. The voltage across each component is the same, and the total current flowing through the circuit is divided among the components according to their resistance.
In contrast, an open series circuit is a circuit in which the components are connected in series, meaning that they are connected end to end in a single path, with no other branch points for the current to follow. If one component fails, the circuit becomes open and the current stops flowing.
Therefore, based on the information provided, the circuit described in the question is a Closed Parallel Circuit.
To learn about Ohm's law click:
brainly.com/question/29775285
#SPJ7
what is the object's position at 6s?
Answer:
6sec and 8 postion
Explanation:
A woman walks 5 meters due east in 12 seconds and then back 2 meters in 7 seconds due west. Determine the person’s velocities for the 5 meters, the 2 meters and the person’s average velocity for the whole walk.
Answer:
Due east - 0.42mps
Due west - 0.29mps
Explanation:
So for the 5 meters 12s
and 2 meters 7s
for the first one we will do 12/5 = 2.4
for the second one 7/2 = 3.5
that is the amount of seconds per meter but we want meters per seconds so
5/12 = 0.42mps
2/7 = 0.29mps
Shelley is in an elevator that is traveling downward and slowing down at a rate of
0.950 m/s2. If Shelley has a mass of 73.2 kg, what is her apparent weight during this
period?
Answer:
N = 648.55[N]
Explanation:
To solve this problem we must use Newton's second law which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
∑F = m*a
where:
∑F = Forces applied [N]
m = mass = 73.2 [kg]
a = acceleration = 0.950 [m/s²]
Let's assume the direction of the upward forces as positive, just as if the movement of the box is upward the acceleration will be positive.
By performing a summation of forces on the vertical axis we obtain all the required forces and other magnitudes to be determined.
[tex]-m*g + N = -m*a\\[/tex]
where:
g = gravity acceleration = 9.81 [m/s²]
N = normal force (or weight) measured by the scale = 83.4 [N]
Now replacing:
[tex]-(73.2*9.81)+N=-73.2*0.950\\-718.092+N=-69.54\\N = -69.54+718.092\\N = 648.55[N][/tex]
The acceleration has a negative sign, this means that the elevator is descending at that very moment.
A student adds two vectors of magnitudes 48 m and 22 m. What are the maximum and minimum possible values for the resultant of these two vectors.
Answer:
Maximum=70 m
Minimum=26 m
Explanation:
Vector Addition
Since vectors have magnitude and direction, adding them takes into consideration not only the magnitudes but also their respective directions. Two vectors can be totally collaborative, i.e., point to the same direction, or be totally opposite. In the first case, the magnitude of the sum is at maximum. Otherwise, it's at a minimum.
Thus, the maximum magnitude of the sum is 48+22 = 70 m and the minimum magnitude of the sum is 48-22= 26 m
Two wave pulses pass each other on a string. The pulse traveling toward the right has positive amplitude, whereas the pulse traveling toward the left has equal amplitude in the negative direction. What happens when they occupy the same region of space at the same time?
a. constructive interference occurs
b. destructive interference occurs.
c. a standing wave is produced.
d. a traveling wave is produced.
e. a wave pulse is produced.
Answer:
destructive interference occurs
A ball is thrown horizontally at a height of 1.5 meters at a velocity of 70 m/s. Assume no air resistance. How long until the ball reaches the ground?
0.25 s
0.38 s
0.55 s
0.67 s
Answer:
[tex]t = 0.55[/tex]
Explanation:
Given
[tex]Height, s = 1.5m[/tex]
[tex]Velocity, v = 70m/s[/tex]
Required
Determine the time to hit the ground
Using free fall formula:
[tex]S = \frac{1}{2}gt^2[/tex]
Take g as 9.8 and substitute value for S
[tex]1.5 = \frac{1}{2} * 9.8 * t^2[/tex]
[tex]1.5 = 4.9 * t^2[/tex]
Make t^2 the subject
[tex]t^2 = \frac{1.5}{4.9}[/tex]
[tex]t^2 = 0.30612244898[/tex]
Solve for t
[tex]t = \sqrt{0.30612244898[/tex]
[tex]t = 0.55[/tex] -- approximated
The scientific method can easily be misinterpreted as ___________. Question 1 options: a great magical trick, or slide of hands, rather than factual an "auto mechanics" guide to Science Investigation a "cookbook" recipe for performing scientific investigations the perfect method for finding the answers to all questions
Answer:
I think the answer is
a "cookbook" recipe for performing scientific investigations
Explanation:
A 125 g pendulum bob hung on a string of length 35 cm has the same period as when the bob is hung from a spring and caused to oscillate. What is the spring’s elastic constant?a) 3.5 N/mb) 5.2 N/mc) 1.9 N/md) 27 N/m
Answer:
k = 3.5 N/m
Explanation:
It is given that the time period the bob in pendulum is the same as its time period in spring mass system:
[tex]Time\ Period\ of\ Pendulum = Time\ Period\ of\ Spring-Mass\ System\\2\pi \sqrt{\frac{l}{g}} = 2\pi \sqrt{\frac{m}{k}[/tex]
[tex]\frac{l}{g} = \frac{m}{k}\\\\ k = g\frac{m}{l}[/tex]
where,
k = spring constant = ?
g = acceleration due to gravity = 9.81 m/s²
m = mass of bob = 125 g = 0.125 kg
l = length of pendulum = 35 cm = 0.35 m
Therefore,
[tex]k = (9.81\ m/s^2)(\frac{0.125\ kg}{0.35\ m})\\\\[/tex]
k = 3.5 N/m
What causes the magnetic field around the wire?
Magnetic field
O A. An electric current
O B. An electric field
PREVIOUS
An electric current causes the magnetic field around the wire. The correct answer is A.
The magnetic field around a wire is caused by the flow of electric current through the wire. When an electric current passes through a wire, it generates a magnetic field that forms circular lines of magnetic flux around the wire. This phenomenon is described by Ampere's law, which states that a magnetic field is produced by an electric current and its strength is directly proportional to the magnitude of the current.
The relationship between the electric current and the magnetic field can be understood using the right-hand rule. If you wrap your right hand around the wire with your thumb pointing in the direction of the current, the curled fingers indicate the direction of the magnetic field lines.
Therefore, an electric field is generated by an electric charge, not by an electric current. While an electric field can exist around a wire if there is a potential difference (voltage) applied across it, it is the flow of electric current that primarily generates the magnetic field.
To learn more about the electric field click:
brainly.com/question/8971780
#SPJ1
A particular engine has a power output of 5 kW and an efficiency of 30%. If the engine expels 6464 J of thermal energy in each cycle, find the heat absorbed in each cycle. Answer in units of J.
Answer:
The heat absorbed in each cycle is 9,234.286 J
Explanation:
Given;
power output, P = 5 kW = 5,000 W
efficiency of the engine, e = 30 % = 0.3
thermal heat expelled, [tex]Q_c[/tex] = 6464 J
let the heat absorbed = [tex]Q_h[/tex]
The efficiency of the engine is given as;
[tex]e = \frac{W}{Q_h} = \frac{Q_h-Q_c}{Q_h} = \frac{Q_h}{Q_h} - \frac{Q_c}{Q_h} = 1-\frac{Q_c}{Q_h}\\\\e = 1-\frac{Q_c}{Q_h}\\\\0.3 = 1-\frac{Q_c}{Q_h}\\\\\frac{Q_c}{Q_h} = 1-0.3\\\\\frac{Q_c}{Q_h} = 0.7\\\\Q_h = \frac{Q_c}{0.7} \\\\Q_h = \frac{6464}{0.7} = 9,234.286 \ J.[/tex]
Therefore, the heat absorbed in each cycle is 9,234.286 J.
A 3 kg mass is travelling in a circle of 0.1 m radius with a speed of 2 m/s. What is the centripetal acceleration?
a = v² / R = (2 m/s)² / (0.1 m) = 40 m/s²
If a marble is dropped from a cliff, how fast is the marble going after falling for 3.6 seconds?
PLEEEEAAASSSEEEEEE HELPPPP MEEEE>
Answer:
35.28m/s
Explanation:
Given
Time t = 3.6secs
Required
Final speed v
Using the equation of motion;
v = u + gt
Substitute;
v = 0 + 9.8(3.6)
v = 0 + 35.28
v = 35.28m/s
Hence the speed of the marble is 35.28m/s
A person holds a ladder horizontally at its center. Treating the ladder as a uniform rod of length 4.15 m and mass 7.98 kg, find the torque the person must exert on the ladder to give it an angular acceleration of 0.396 rad/s2.
Answer:
4.535 N.m
Explanation:
To solve this question, we're going to use the formula for moment of inertia
I = mL²/12
Where
I = moment of inertia
m = mass of the ladder, 7.98 kg
L = length of the ladder, 4.15 m
On solving we have
I = 7.98 * (4.15)² / 12
I = (7.98 * 17.2225) / 12
I = 137.44 / 12
I = 11.45 kg·m²
That is the moment of inertia about the center.
Using this moment of inertia, we multiply it by the angular acceleration to get the needed torque. So that
τ = 11.453 kg·m² * 0.395 rad/s²
τ = 4.535 N·m
The Torque will be "4.535 N.m".
Given:
Mass of ladder,
m = 7.98 kgLength of ladder,
L = 4.15 m
The moment of inertia will be:
→ [tex]I = \frac{mL^2}{12}[/tex]
[tex]= \frac{7.98\times (4.15)^2}{12}[/tex]
[tex]= \frac{7.98\times 17.2225}{12}[/tex]
[tex]= 11.45 \ kg.m^2[/tex]
hence,
The torque will be:
→ [tex]\tau = 11.453\times 0.395[/tex]
[tex]= 4.535 \ N/m[/tex]
Thus the above approach is correct.
Learn more about torque here:
https://brainly.com/question/19247046