measure the thickness of the brake rotor. how thick is the brake rotor? please help I've Kittery spent forever trying to do this
Answers
Answer:
Explanation:
its reading the caliper
as the 0 lines up w the 1/8" mark, it is 1 1/8"
Answer:
The minimum thickness will be stamped somewhere. You see there's part numbers and other things here you might need to use a wire brush to kind of clean it up but that's the thicknessUse a micrometer at the thinnest point on the surface of the rotor where it meets the pads to measure the minimum operational thickness. If your rotor needs to be cut or has worn passed this thickness, you'll need new rotors. You may also discover your rotor has Disc Thickness Variation.
Related Questions
Which device uses electricity to produce a rotational motion? A computer C magnet B generator D motor
Answers
Answer:
B generator
Explanation:
Water rockets are very different from fuel powered rockets for many reasons. Explain some of the differences between them and why rockets that are launched into space require more power and thrust that water rockets?
Answers
Answer:
How is a water rocket different than a compressed air rocket?
Usually the rocket is made from a 2-liter soda pop bottle. Before launch, the bottle is filled with some amount of water, which acts as the "propellant" for the launch. Since water is about 100 times heavier than air, the expelled water produces more thrust than compressed air alone.
we are learning about sound waves and pitched. i need to know which glass will make a high pitch and which one will make a low one.
Answers
Answer:
the glass that has the most water produces the lowest pitch and the glass with the smaller amount produces the highest pitch
Explanation:
the glass full of water causes the glass to vibrate slower and the sound u hear is at a lower pitch
According to the special theory of relativity, what is the fourth dimension?
Answers
Explanation:
A four-dimensional space is a mathematical extension of the concept of three-dimensional or 3D space. Three-dimensional space is the simplest possible abstraction of the observation that one only needs three numbers, called dimensions, to describe the sizes or locations of objects in the everyday world.
According to the special theory of relativity, the fourth dimension is time. The special theory of relativity, proposed by Albert Einstein in 1905, revolutionized our understanding of space and time.
It states that space and time are interconnected and form a four-dimensional framework known as spacetime. In this framework, three dimensions correspond to space (length, width, and height), and the fourth dimension is time. Einstein's theory introduced the concept of time dilation, which means that time can appear to pass differently for observers in relative motion. This idea challenges the notion of time as an absolute quantity and demonstrates that it is influenced by an observer's relative motion and gravitational fields.
To visualize the fourth dimension, consider a space-time diagram where an object's position in space is plotted against time. Each point on the diagram represents an event, combining its spatial coordinates with the time at which it occurred. This four-dimensional representation allows us to understand the relationship between space and time in a unified framework.
Learn more about Special Theory of Relativity here:
https://brainly.com/question/14140033
#SPJ2
Which nucleus completes the following equation?
Answers
Answer:
its b
Explanation:
a car has a mass of 200kg. It is on a hill 1000m high. How much gravitational potential energy does the car have?
Answers
Answer:
Explanation:
PE = m * g * h
m = 200 kg
h = 1000 m
g = 9.81
PE = 200 * 9.81 * 1000
PE = 1962000 Joules
Fundamentally, pressure is defined as force per unit area. What is the source of the force in a gas sample? A) The force is from gravity acting on the particles. B) The force is composed of the sum of the collisions only between gas molecules. C) The force is composed of the sum of the collisions only between the gas molecules and the container. D) The force is composed of the sum of all collisions--between the gas molecules, each other and the container. E) The force was imparted to the container in its initial filling, a transfer of momentum.
Answers
Answer:
Option C
Explanation:
Given
Pressure = Force /Area
For any gas sample, force is defined as basically the force exerted by the gas molecules when they strike the surface (with in which they are contained) and bounce back.
Hence, Option C is the correct
what is an echo?
give me an short answer
Answers
Answer:
Echo..... when the sound reflects back
A crane lifts a load of 15000N to a height 40m in 50 seconds. Calculate the power of the crane
Answers
Answer:
P = 12000 W
Explanation:
General data:
F = 15000 N d = 40 mt = 50 sP = ?Work is force times unit of distance. So in order to calculate the power we must first calculate the work.
Formula:
[tex]\boxed{\bold{W=\frac{F}{d}}}[/tex]Replace and solve
[tex]\boxed{\bold{W=\frac{15000\ N}{40\ m}}}[/tex][tex]\boxed{\bold{W=600000\ J}}[/tex]once the work is found, we proceed to find the power according to the formula:
[tex]\boxed{\bold{P=\frac{W}{t}}}[/tex][tex]\boxed{\bold{P=\frac{600000\ J}{50\ s}}}[/tex][tex]\boxed{\boxed{\bold{P=12000\ W}}}[/tex]The power of the crane is 12000 Watts.
Greetings.
There is a fixed voltage across a resistor, and you measure a current of c1 A. If you replace the resistor with one that has twice the resistance value, how much current will you measure? a) 0.2 A b) 0.5 A c) 0.8 A d) 1.1 A
Answers
Answer:
Option B
Explanation:
Given
The current flowing through the circuit = 1 Ampere
As we know
I is inversely proportional to resistance.
I α 1/r
or I = k/r
If the resistor "r" is replaced by any resistor "R" with resistance = 2r, then the current will be
I = 1/2 of 1 ampere
I = 0.5 Ampere
Hence, option B is correct
Describe how an oscilloscope should be used to measure the frequency of the sound wave from the sonometer
Answers
Answer:
T = reading (cm) time base (s / cm)
f = 1 / T
Explanation:
An oscilloscope is a piece of equipment that allows you to visualize and measure a wave that reaches you, in the case of having a sonometer this transforms the sound wave into an electrical signal to be introduced through one of the voltage channels of the equipment, on the screen we will see the oscillating alternating signal, if it is fixed we can make the reading, if it is moving the time base and the trigger must be adjusted to stop it.
In the oscilloscope we can read the period of the signal, this is the time it takes for the signal to repeat itself with this value, we can calculate the frequency with the formula, for the reading of the period the distance is measured on the labeled screen and multiplied by the time base
T = reading (cm) time base (s / cm)
f = 1 / T
What do you think we can learn about Earth's history by looking at the Grand Canyon?
Answers
Does anyone got notes on Newtons Law of Universal Gravitation?
Answers
Answer:
I swear I am not a bot! but I think people post some notes on g00gle as well there are many things you can find when searching
Explanation:
copy/paste
( I have NO idea if these will help you but I try)
https://www.richlandone.org/site/handlers/filedownload.ashx?moduleinstanceid=21002&dataid=21739&FileName=Gravitation%20Notes.pdf
https://www.physicsclassroom.com/class/circles/Lesson-3/Newton-s-Law-of-Universal-Gravitation
https://courses.lumenlearning.com/boundless-physics/chapter/newtons-law-of-universal-gravitation/
que es el periodo de un pendulo
Answers
Answer:
what
Explanation:
Answer:
El periodo del péndulo simple, para oscilaciones de poca amplitud, viene determinado por la longitud del mismo y la gravedad.
Explanation:
No influye la masa del cuerpo que oscila ni la amplitud de la oscilación. Donde: T: Periodo del péndulo.
sheet of paper and a ball having same mass are dropped from the same height and obviously paper balls faster than a sheet of paper. what conclusion can be drawn from this acticity?
Answers
Answer:
In free fall, all items will fall at the same time. You were told that they have the same mass hence g×t which is constant.Iqbal has push a lighter box and seema has to push a similar heavier box on the same floor . Who will have to apply a larger force and why ?
Answers
Answer: Seema
Explanation:
When an object is on the floor, there is a force of friction acting on it. This force is higher if the object is heavier because the object would be pushing against the floor with more force.
To push such an object, one would have to apply enough force to break the friction holding the object to the floor and so with heavier objects, more force is needed to push the object because there is more friction acting on it.
According to the law of universal gravitation, any two objects are attracted to each other. The strength of the gravitational force depends on the masses of the objects and their distance from each other.
Many stars have planets around them. If there were no gravity attracting a planet to its star, the planet's motion would carry it away from the star. However, when this motion is balanced by the gravitational attraction to the star, the planet orbits the star.
Two solar systems each have a planet the same distance from the star. The planets have the same mass, but Planet A orbits a more massive star than Planet B.
Which of the following statements is true about the planets?
A.
Planet B will keep orbiting its star longer than Planet A.
B.
Planet B is more attracted to its star than Planet A.
C.
Planet A orbits its star faster than Planet B.
D.
Planet A has a longer year than Planet B.
Answers
C. Planet A orbits its star faster than Planet B.
Explanation:
since Planet A is closer to the star due to its gravitational force, it will orbit its star faster than planet B
hope this helps :)
A 20×10⁹charge is moved between two points A andB that are 30mm apart and have an electric potential difference of 600v between them. calculate a) the electric field strength between A and B b)the work done on the charge.
Answers
Answer:
John Felix Anthony Cena is an American professional wrestler, actor, and television presenter. He is currently signed to WWE. Born and raised in West Newbury, Massachusetts, Cena moved to California in 1998 to pursue a career as a bodybuilder.
Explanation:
A baseball player hits a 140 g baseball with a force of 2800 N. What is the
acceleration of the ball as it leaves the bat?
A. 0.050 m/s2
B. 20 m/s2
C. 390 m/s2
D. 20,000 m/s2
Answers
Samples of different materials, A and B, have the same mass, but the sample
of A is higher in density. Which statement could explain why this is so?
A. The sample of material A has greater volume than the sample of
material B.
B. The particles that make up material B have more mass than the
particles that make up material A.
C. The particles that make up material B are more closely packed
together than the particles that make up material A.
D. The particles that make up material A have more mass than the
particles that make up material B.
Answers
Answer:
B. The particles that make up material B have more mass than the
particles that make up material A.
Explanation:
What is the frequency of light with a wavelength of 7.9 x 10^-9 m? ( the speed of light is 3.00 x 10^8)
A.) 3.80 x 10^16
B.) 2.37 Hz
C.) 2.37 m
D.) 3.80 x 10^16 Hz
Answers
then v=the speed of light.
and f=what’s we’re looking for
and lambada=the wavelength.
so then you sub what you have (v and lambada) in the formula.
then multiply the frequency(f) by the given wavelength and then solve for f
1. When energy is transformed from one form to another it is called
A. transformation of energy
B. conservation of energy
C. consumed energy
D. wasted enenergy
Answers
Answer:
A)
Explanation:
Energy transformation is when energy changes from one form to another.
How might other planets in the Solar system be studied?
Answers
Answer:
probably by robots
Explanation:
Answer:
they can be studied through telescopes, satellites, and rovers. maybe in the future spaceships
Explanation:
Un tanque de 50 litros tiene un gas a CNPT. ¿Cuánto valdrá la presión si la temperatura aumenta 40 °C, y el volumen permanece constante?
Answers
Answer:
La presion a 40 °C es 1.05 atm.
Explanation:
Usando la ecuación ideal de los gases.
[tex]PV=nRT[/tex]
Debemos recordar, que CNPT significa condiciones normales de presión y temperatura.
Para el primer estado tenemos:
[tex]P_{1}V_{1}=nRT_{1}[/tex]
Donde:
P(1) es la presion en el estado incial (1 atm)V(1) es el volumen incial (50 L)T(1) es la temperatura incial (25 °C = 298 K)Para el segundo estado:
[tex]P_{2}V_{2}=nRT_{2}[/tex]
Donde:
P(2) es la presion en el estado final ( x atm)V(2) es el volumen final (50 L)T(2) es la temperatura final (40 °C = 313 K)Como ambas ecuaciones tienen el mismo valor de volumen podemos igualarlas:
[tex]\frac{nRT_{1}}{P_{1}}=\frac{nRT_{2}}{P_{2}}[/tex]
n y R permanecen constantes, se puden cancelar.
[tex]\frac{T_{1}}{P_{1}}=\frac{T_{2}}{P_{2}}[/tex]
Despejamos P(2).
[tex]P_{2}=\frac{P_{1}T_{2}}{T_{1}}[/tex]
[tex]P_{2}=\frac{1*313}{298}[/tex]
[tex]P_{2}=1.05\: atm[/tex]
Espero te haya sido de ayuda!
Which type of lens is shown in the picture below?
plane
refractional
concave
Answers
Have a nice day
The table below shows the speed of sound waves from musical sound sources at 20°C. Which conclusion can be made based on the information in the table? Wave speed and wavelengths can vary inversely to produce the same frequency. Frequency and wave speed can vary directly to produce the same wavelength. Wavelengths and frequency can vary inversely to produce the same wave speed. Frequency and wavelengths can vary directly to produce the same wave speed. Mark this and return
Answers
Answer:
c
Explanation:
Answer:
C
Explanation:
Took it on edg
The density of silver is 10.49 g/cm3. If a sample of pure silver has a volume of 12.993 cm3, what is the mass?
Answers
Explanation:
Density=mass/volume
mass=x
10.49=X/12.99
X=10.49 X12.99
X=136.29657
mass=136.3g/cm^3
I hope it helped.
What is the connection between latitude and temperature?
What is the connection between longitude and temperature?
Answers
Answer:
1.Latitude forms an inverse relationship with temperature, where regions at lower latitudes have higher temperatures compared to areas at higher latitudes. The lower the latitude, the warmer the region becomes. Conversely, the higher the latitude, the colder the area becomes.
2.Latitude and longitude make up the grid system that helps humans identify absolute, or exact, locations on the Earth's surface. There is a relationship between latitude and temperature around the world, as temperatures are typically warmer approaching the Equator and cooler approaching the Poles.
A juggler is throwing balls up in the air and catching them. An observer in the crowd makes the statement that the potential and kinetic energy of the ball is the same when the ball is halfway down from its highest point. In one paragraph, using your own words, explain using the relationship of mechanical energy, potential energy, and kinetic energy why the observer is correct.
Answers
Answer:
do you have the answer?
Explanation:
if so whats the answer?
how is an earthquake's origin and intensity identified?
Answers
Answer:
using a seismograph
Explanation: