matter graphic organizer

Answers

Answer 1
Wym there is no way of finding out the answer

Related Questions

A graduated cylinder is placed on an electronic balance, and the scale reads 78.32 g. 10.0mL of glycerine are added, and the scale reads 91.78 g. What is the density of glycerine

Answers

Answer:

1.346 g/mL

Explanation:

The density is defined as the mass of a substance per unit of volume.

In the problem, you add 10.0mL of glycerine. the mass change from 78.32g to 91.78g. The difference is the mass of the glycerine:

Mass glycerine: 91.78g - 78.32g = 13.46g

As the volume added was 10.0mL, the density, δ, in g/mL is:

δ =13.46g / 10.0mL =

1.346 g/mL

Is the equation above balanced or unbalanced? Explain? Worth 55 points.

Answers

Answer:

For me, it is balanced

Explanation:

Because the amount of element Zn reaction is equal the production. Also as the amount of Hydrogen and Chloride in the reaction and the production are equal.

Balanced even though it is formed differently on each side they are the same. When counting the coefficient in front of it they are still the same.

+
equations

2. Na,CO3(aq) + 2K(s) → K2CO3(aq) + 2Na(s)

Answers

Answer:

Explanation:

Na2CO3(ag) +2k(s) →K2CO3 (aq) + 2Na(s)

SHOW YOUR WORK!!!!!!!!!!!!!!!
An experiment performed to determine the density of lead yields a value of 10.95 g/cm3. The accepted value for the density of lead is 11.342 g/cm3. Find the percent error.

Answers

Answer:

3.45618%

Explanation:

Percent Error = measured value - accepted value/ accepted value x 100

Measured Value: 10.95

Accepted Value: 11.342

Work:

[tex]\frac{10.95-11.342}{11.342} *100[/tex]

[tex]\frac{-0.392}{11.342} *100[/tex] = -3.45618

You cannot have a negative percentage. Therefore the answer is 3.45618%

plz tell me I will also give brainiest. forces can be ________ or unbalanced ​

Answers

Answer:

balanced

Explanation:

hope this helps

Answer:

[tex] \boxed{ \bold{ \huge{ \boxed{ \sf{ \: Balanced}}}}}[/tex]

Explanation:

Forces can be balanced or unbalanced.

[tex] \bigstar {\sf{ \: \: Balanced \: force}}[/tex]

When a number of forces acting on a body do not change its state of rest or uniform motion in a straight line , the forces are said to be balanced forces. For example : In the game of tug of war, two teams pull a rope in opposite directions. When the two teams exert equal and opposite forces on the rope, the rope remains steady and does not move in any direction. It appears as if no force is acting on the rope. Thus, the two forces acting on the rope in this case are balanced forces.

[tex] \bigstar{ \sf{ \: Unbalanced \: force}}[/tex]

When a number of forces acting on a body change it's state of rest or uniform motion in a straight line, the forces are said to be unbalanced forces. For example, if we push a toy car towards east, it moves towards east. If it is pushed towards west, it moves towards west. This unbalanced force produces motion.

Hope I helped!

Best regards! :D

~TheAnimeGirl

A marathon is approximately 42.195 km Convert the distance to
centimeters.

Answers

Answer:

4219500 centimeters

Explanation:

I hope this helped!

How do you know when a boy likes you? A. He talks to you a lot B. He is mean to you C. He hugs you a lot D. He tries to take your stuff from you

Answers

Answer:

I feel it would be C or D but more likely to be D

Explanation:

Answer:

I guess it is A he talks to u alot but boys are different so it could be each one u know?

Boron (B) has two Isotopes, boron-10 and boron-11. The atomic weight of boron is the

A. combined masses of boron-10 and boron-11

B. average number of neutrons in boron-10 and boron-11

C. weighted average of the masses of boron-10 and boron-11

D. mass of boron-10 minus the mass of boron-11​

Answers

Answer:

C. is the correct answer

Explanation:

I just completed this question and got it correct.

WILL MARK BRAINLIEST

7. When the numbers 5.56 x 10^2 and 3.81 x 10^3 are added the result is:
a) 4.36 x 10^3
b) 4.366 x 10^3
c) 4.366 x 10^2
d) 4.37 x 10^3

Answers

Answer:

option b

Explanation:

556+3810

=4366

=4.366*10^3

Hope it helps

Pls mark as brainliest

Please please help :(

Answers

Answer: ¹²₅C

Explanation:

¹²₅C is incorrect. The superscript is the atomic mass. This varies between each element. The subscript is the atomic number. This doesn't change. You will see every element has the correct atomic atomic number except for Carbon. Carbon should have atomic number 6.

The ground-state electron configuration for an element contains an unpaired 3s electron.

Answers

Answer:

Na

Sodium is located in the third row of the periodic table, where the 3s3s3, s orbital is being filled. Because sodium is the first of the two 3s3s3, s elements, its ground-state electron configuration contains a single, unpaired 3s3s3, s electron.

Explanation:

its late but ik someone can use it

The ground-state electron configuration for an element contains an unpaired 3s electron is Sodium, Na.

The ground state electron configuration of an element shows a series of how its electrons are arranged in thier orbitals at their  lowest energy state.

The element which contained an unpaired 3s electron is the Alkali metal, Sodium.

Sodium, Na has atomic number of 11 and at ground state and will therefore be written as  1s²2s²2p⁶3s¹   We can also write the condensed form since the core electrons is the same with Ne,  a noble gas which is [Ne]3s1.

The s orbital should contain at most 2 electrons , since for sodium, it has 1 electron in the 3s orbital, we say it is unpaired.

See more here:https://brainly.com/question/2071096

A
is a changeable factor in an experiment.
O THEORY
O LAW
O HYPOTHESIS
O CONTROL
O VARIABLE

Answers

Answer:

Variable is a changebale factor in an experiment.

Explanation:

Answer: O VARIABLE

Explanation:

Which can be categorized as a use of plasma in technology?
A. taking pictures of solar flares
B. observing the aurora borealis
C. making fluorescent lights for houses
D. making telescopes to observe distant stars

Answers

The answer would be: Making fluorescent light for houses.

Making fluorescent lights for houses can be categorized as use of plasma in technology.

What is Plasma Technology ?

Plasma technology is commonly used in many industries, including in the automotive, microelectronics, packaging and medical device industries. Along with solid, liquid and gas, plasma is a state of matter.

State changes occur by either adding or removing energy from a substance.

Making fluorescent lights for houses can be categorized as use of plasma in technology

The mercury atoms in the plasma generate light very efficiently, but much of it is ultra-violet (UV), invisible to the eye and harmful to it (or rather, it would be, were it not absorbed by the glass).

The solution is to coat the inside of the tube with a glow-in-the-dark (fluorescent) paint, which absorbs the UV and re-emits its energy as visible light.

Therefore Option C is the correct answer.

To know more about Plasma Technology

https://brainly.com/question/12578690

#SPJ5


What’s the independent variable, dependent variable, experimental variable and constant?Scenario #1: Traci thinks that instrumental music played in the office will increase the productivity
of workers at the office. She creates two groups of 50 workers each and assigns each group the
same task in this case, they are asked to staple a set of papers). Group A has instrumental music
playing while they work. Group B does not have any music playing for them. After an hour, Traci
counts how many stacks of papers each group has made. Group A made 2,113 stacks. Group B
made 1,587 stacks.

Answers

Answer:

independent variable- instrumental music

dependent variable- Number of stacks of papers made

experimental variable- Group A has instrumental music

playing

constant- same task,

Explanation:

When an atom of a Radioactive element emits alpha radiation, an atom of a different element is formed. A different element is formed because the radioactive element has lost...

Answers

Explanation:

its its originality as an atom has to be pure

A different element is formed because the radioactive element has lost its originality as a pure atom when a radioactive element emits alpha radiation.

What is a radioactive element?

Some elements of unstable atomic nuclei undergo radioactive decay to form stable nuclei because of the presence of excess nuclear charge inside them are known as radioactive elements.

The stability of nuclei of an element can be estimated by neutron to proton ratio. The atomic number up to Z= 20 is stable nuclei and contains an equal number of protons and neutrons. As the atomic number starts to increase, the repulsion forces between protons increase.

Thus, the neutron-to-proton ratios of stable nuclei increase with increasing atomic numbers. If elements with the atomic number, Z > 83 and n/p > 1.5 and they will be most unstable and radioactive.

For example, Pu-240 emits an alpha particle and gets converted into U-236 which is completely different from the original nuclei.

²⁴⁰Pu₉₄  →   ⁴He₂  +   ²³⁶U₉₂

Therefore, the radioactive element lost its identity after disintegration.

Learn more about the radioactive element, here:

https://brainly.com/question/23759636

#SPJ2

A balloon has a volume of 10,500 liters, and the temperature is 15°C. If the temperature were -25°C, what would the volume of the balloon be?

12,194 L
9,042 L

Answers

Answer: 12,194 L

Explanation:

Which would be an example of a homogeneous mixture?

Question 10 options:

Sprite


marinara sauce


air


ranch dressing

Answers

Answer:

Air

Explanation:

Air is an homogeneous mixture because it contain gaseous samples that have the same proportion throughout it's given sample. Air is a mixture of gaseous substances of 78.09% nitrogen, 20.95% oxygen, 0.93% argon, 0.04% carbon dioxide, 1% of water vapor and small amounts of other gases in same proportion.


What type of element is used in the electronics industry because it is a semiconductor

Answers

Answer:

Pure Silicon in Electronics

Silicon material is commonly used as a semiconductor in electronics: devices such as transistors, printed circuit boards, and integrated circuits make use of silicon's highly conductive properties to maximize their performance.

Explanation:

2) A wooden block has a volume of 176 cm3 and a density of 18.2 g/ cm3. What is the mass?

Answers

Answer:

9.67 g

Explanation:

176 cm³ / 18.2 g/cm³ = 9.6703296703...

I rounded to the nearest hundredth

A scientist observes that the electric resistance of a superconducting material drops to zero when the material is cooled to very low temperatures which of the following statements best describe what the scientist is observing

Answers

Answer: The scientist is observing an intensive property of a superconductor. ( So C)

Explanation: edu

Answer: the scientist is observing an intensive property of a superconductor.

saftey goggles are worn in the lab- ​

Answers

Answer:

Yes

Explanation:

Is this a question or what?

Answer:

this is true and should always be true

Explanation:

if they are not on in the lab you or others may get injured

How many joules of heat are needed to raise the temperature of 10.0 g of aluminum from 22°C to 55°C, if the specific heat of aluminum is 0.90 J/g°C?

Answers

Answer:

0.90 degree C

Explanation:

The key to this problem lies with aluminium's specific heat, which as you know tells you how much heat is needed in order to increase the temperature of  1 g of a given substance by 1∘C

In your case, aluminium is said to have a specific heat of

0.90 J g∘ C.

Greg ran for 25 minutes at a speed of 5 km/m. Find the distance.

Answers

Here it is⬆️ Distance is 125 km

18 grams
4 kilograms
8 kilograms

Answers

Answer:

1 18 grams

2 500g

4 960 grams

5 7 kilograms

How do atoms emit light ?

Answers

Answer:

The frequencies of light that an atom can emit are dependent on states the electrons can be in. When excited, an electron moves to a higher energy level or orbital. When the electron falls back to its ground level the light is emitted.

Please Help!!! Time LImit. Extra Points and Brainiest.
Acids are a group of molecules with similar physical and chemical properties. Acids react with metal, but vegetable oil does not. What can you infer from this observation? Choose the two statements that apply.
A. The combination of atoms in acids and oil result in very different properties.
B. Acids and oil have different properties because they have different shapes.
C. The atoms present in molecules affect their properties.
D. Vegetable oil is most likely some type of acid.

Answers

Answer:

A and D

Explanation:

- 1. Justin usually blows his nose using Kleenex tissues. His snot keeps leaking through the tissue. He decided he is going to create an experiment to find out if there is something better. What is his dependent variable? - A. Justin - B. Amount of snot the tissue can hold - C. Amount of tissue - D. Type of tissue

Answers

Answer:

B. Amount of snot the tissue can hold

Explanation:

In this specific scenario, the dependent variable would be the amount of snot the tissue can hold. That is because this is what Justin is trying to measure, which is also dependent on the type of tissue which would be the independent variable in this scenario. The different types of tissues can absorb different amounts of snot and this is what Justin ultimately wants to determine.

How many neutrons in beryllium

Answers

Answer:

There are 5 neutrons in beryllium

5 neutrons
4 electrons
Atomic number is 4
Hope this helps

There are 5 areas of chemistry:physical chemistry, organic chemistry, analytical chemistry, biochemistry and inorganic chemistry.identify which of the five area of chemistry best fits the action done by zoe, a chemist. zoe is using an instrument called a spectrophotometer to precisely determine the levels of various chemicals in a sample of drinking water.

If someone could help me I would really appreciate it. Thank you!

Answers

Answer:

Analytical chemistry

Explanation:

because in analytical chemistry checks that different chemicals in water,salt etc....

Discuss the sources and harmful effects of the following air pollutants.(i) Carbon monoxide (ii) Sulphur dioxide (iii) Oxides of nitrogen

Answers

Answer:

Oxides of Nitrogen (NOx)

NOx is a collective term used to refer to two species of oxides of nitrogen: nitric oxide (NO) and nitrogen dioxide (NO2).

Annual mean concentrations of NO2 in urban areas are generally in the range 10-45 ppb (20-90 µgm-3). Levels vary significantly throughout the day, with peaks generally occurring twice daily as a consequence of "rush hour" traffic. Maximum daily and one hourly means can be as high as 200 ppb (400 µgm-3) and 600 ppb (1200 µgm-3) respectively.

Globally, quantities of nitrogen oxides produced naturally (by bacterial and volcanic action and lightning) far outweigh anthropogenic (man-made) emissions. Anthropogenic emissions are mainly due to fossil fuel combustion from both stationary sources, i.e. power generation (21%), and mobile sources, i.e. transport (44%). Other atmospheric contributions come from non-combustion processes, for example nitric acid manufacture, welding processes and the use of explosives.

Sulphur Dioxide (SO2)

SO2 is a colourless gas. It reacts on the surface of a variety of airborne solid particles, is soluble in water and can be oxidised within airborne water droplets.

Annual mean concentrations in most major UK cities are now well below 35 ppb (100 µgm-3) with typical mean values in the range of 5-20 ppb (15-50 µgm-3). Hourly peak values can be 400-750 ppb (1000-2000 µgm-3) on infrequent occasions. Natural background levels are about 2 ppb (5 µgm-3).

The most important sources of SO2 are fossil fuel combustion, smelting, manufacture of sulphuric acid, conversion of wood pulp to paper, incineration of refuse and production of elemental sulphur. Coal burning is the single largest man-made source of SO2 accounting for about 50% of annual global emissions, with oil burning accounting for a further 25-30%.

Carbon Monoxide (CO)

Carbon Monoxide is a colourless, odourless, tasteless gas that is slightly lighter than air.

Natural background levels of CO fall in the range of 10-200 ppb. Levels in urban areas are highly variable, depending upon weather conditions and traffic density. 8-hour mean values are generally less than 10 ppm (12 mgm-3) but have been known to be as high as 500 ppm (600 mgm-3).

CO is an intermediate product through which all carbon species must pass when combusted in oxygen (O2). In the presence of an adequate supply of O2 most CO produced during combustion is immediately oxidised to carbon dioxide (CO2). However, this is not the case in spark ignition engines, especially under idling and deceleration conditions. Thus, the major source of atmospheric CO is the spark ignition combustion engine. Smaller contributions come from processes involving the combustion of organic matter, for example in power stations and waste incineration.

Ozone (O3)

O3 is the tri-atomic form of molecular oxygen. It is a strong oxidising agent, and hence highly reactive.

Background levels of O3 in Europe are usually less than 15 ppb but can be as 100 ppb during summer time photochemical smog episodes. In the UK ozone occurs in higher concentrations during summer than winter, in the south rather than the north and in rural rather than urban areas.

Most O3 in the troposphere (lower atmosphere) is formed indirectly by the action of sunlight on nitrogen dioxide - there are no direct emissions of O3 to the atmosphere. About 10 - 15% of tropospheric O3 is transported from the stratosphere where it is formed by the action of ultraviolet (UV) radiation on O2. In addition to O3, photochemical reactions involving sunlight produce a number of oxidants including peroxyacetyl nitrate (PAN), nitric acid and hydrogen peroxide, as well as secondary aldehydes, formic acid, fine particulates and an array of short lived radicals. As a result of the various reactions that take place, O3 tends to build up downwind of urban centres where most of NOx is emitted from vehicles.

Explanation:

Other Questions
If the average baby blue whale grows at a rate of 1.5 inches a day, how many days does a baby whale grow to reach 47.075 inches? (Round to the nearest hundredth of a day) Which details from the excerpt help the reader to visualize Rainsfords hiding spot?phrases such as leg-weary, face lashed, and need for restphrases such as lashed by the branches, and through the darkphrases such as thick trunk, outspread branches, and broad limbsphrases such as new confidence, feeling of security, and trace him there Joelle is a manager at a construction company, and she is interested in the chemistry behindthe materials they use. She has begun studying the materials used to fill walls. She knowsthat to keep the temperature inside a room steady the material must be a thermal insulator,and she predicts that materials should not be acidic or else they would dissolve too easily inwater 3. If the area of the rectangle is 252 square units, find x. PLEASE I REALLY NEED HELP! THANK YOU can you help please :) Is this relation a function? Find the distance between the points (5, 3) and (7,6). 1. Simplify (6x2 + x 5) + (9x2 3x+6). Ava is 23cm taller than Olivia, and Olivia is half the height of Lucas. If Lucas is is 1.78m tall, how tall is Ava and Olivia? Find the unit rate of 90 miles/2 hours, IN FEET PER SECOND! can you please do it step by step plz? May you help me please its due today Passing the USMLE is a requirement for licensure in the United States for which profession?O nurseO paramedicO physicianO technician Los almorvides, los almohades, los zires y los pueblos de Tifas no confiabanen un sector de la poblacin que en un pasado fueron cristianos pero que sehaban convertido al islam. Este hecho guarda una estrecha relacin con lamatanza de los Abencerraje. Identifica el nombre de este grupo social. Which of the following would be an example of using an art technique?'Creating an artwork that is realistic, abstract, or non-objectiveUsing a particular type of art material, such as paint or charcoalSelecting your choice of a surface to work on, such as canvas or paperMoving your hand to shade in a specific way to create a specific texture What can you conclude about Martin and his sister by the way they greet Grandpa? Hitting a ball off a tee would be considered which of the following? A. A closed serial skillB. An open continuous skillC. An open discrete skillD. A closed discrete skill The are adding a new room to their house. The room will be a cube with volume 6859 ft. They are going to put in hardwood floors, and the contractor charges $5 per square foot. How much will the hardwood floors cost? 54.29Which statement describes an atomic nucleus?O An atomic nucleus is negatively charged.O An atomic nucleus has no electrical charge.O An atomic nucleus consists of mostly empty space.O An atomic nucleus contains most of the atom's mass.Save and ExitNextSubmitd return What is the answer to this problem? Try to describe as much as you can. Help me anyone if you would please