Maria's mother was deported 6 months ago, and she is staying with a cousin. She has to share a room with 3 other children and is very discouraged. She has little energy to do much of anything, and she cries a lot. She is probably suffering from?

Answer:

Approximately [tex]2.8 \times 10^{5} \; \rm J[/tex] (assuming that the car is moving on level ground, and that there is no friction to hinder the motion of the car.)

Explanation:

Formula for the kinetic energy, [tex]\rm KE[/tex], of an object of [tex]m[/tex] travelling at velocity [tex]v[/tex]:

[tex]\displaystyle \text{KE} = \frac{1}{2}\, m \cdot v^{2}[/tex].

Let [tex]v_1[/tex] and [tex]v_2[/tex] denote the velocity of this car before and after the acceleration.

Kinetic energy of this car before the acceleration:

[tex]\begin{aligned}\text{KE}_1 &= \frac{1}{2}\, m \cdot {v_1}^{2} \\ &= \frac{1}{2} \times 700\; \rm kg \times (12\; \rm m \cdot s^{-1})^{2} \\ &\approx 5.0 \times 10^{4}\; \rm J\end{aligned}[/tex].

Kinetic energy of this car after the acceleration:

[tex]\begin{aligned}\text{KE}_2 &= \frac{1}{2}\, m \cdot {v_2}^{2} \\ &= \frac{1}{2} \times 700\; \rm kg \times (30.6\; \rm m \cdot s^{-1})^{2} \\ &\approx 3.3\times 10^{6}\; \rm J\end{aligned}[/tex].

Assume that this car was travelling on level ground. Also assume that there is no friction to hinder the motion of this car. The work of the engine of this car  would be equal to the amount of [tex]\rm KE[/tex] that the car has gained:

[tex]\rm KE_2 - KE_1 \approx 2.8\times 10^{5}\; \rm J[/tex].

Answer:

E = 7200 J = 7.2 KJ

Explanation:

The electric field due to a sphere is similar to the electric field due to a point charge. It is calculated by the use of the following formula:

[tex]E = \frac{kq}{r^2}\\[/tex]

where,

E = Electric Field = ?

k = Coulomb Constant = 9 x 10⁹ Nm²/C²

q = charge on sphere = 2 μC = 2 x 10⁻⁶ C

r = distance from the center of the sphere to the location = 5 cm = 0.05 m

Therefore,

[tex]E = \frac{(9\ x\ 10^9\ Nm^2/C^2)(2\ x\ 10^{-6}\ C)}{(0.05\ m)^2}[/tex]

E = 7200 J = 7.2 KJ

Answer:

D. Friction

Explanation:

"Friction is caused by microwelds that form between two surfaces. Microwelds are stronger when the two surfaces are pushed together with a greater force." - ( Module 3 • Forces and Newton’s Laws) quoted

hope this helps and is right. p.s. i really need brainliest :)

Answer:

Friction

Explanation:

Took The Test

Answer:

Explanation:

In this case, a dark shirt or blanket would be a heat conductor as well as metal would be, too

Answer:

It means it is the main building block material for society.

Specific heat is the amount of heat energy that causes a unit increase in temperature by required to be added to the unit mass of the substance. It can be measured by the heat capacity of a particular substance. The unit of specific heat is joule/kg/kelvin.

Material Specific heat capacity Thermal conductivity

Clay                1000                                       0.60

stone              1000                                      1.8

brick               800                                       0.73

concrete        1000                                       1.13

Advice on what this means for society:

Learn more about specific heats:

https://brainly.com/question/21041726

The statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

A linear relationship is a type of association between two variables where a change in one produces a direct modification in the another one.

A linear relationship may change depending on the rate of change and therefore the size of this variation is not the same.

In conclusion, the statement 'in a linear relationship, a change in one variable will always result in a change of the same size in the other variable' is FALSE.

Learn more about linear relationships here:

https://brainly.com/question/6691346

#SPJ1

Answer:

the answer is B. it's too easy

Answer:

4.5

Explanation:

Given the following

Weight of the car = 1200N (Load)

Let us get the effort by using the formula;

F1/A1 = F2/A2

Substitute the given values

1200/0.9 = F2/0.2

Cross multiply

0.9F2 = 1200 * 0.2

0.9F2 = 240

F2 = 240/0.9

F2 = 266.67N

Hence the effort is 266.67N

Mechanical Advntage = Load/Effort

MA = 1200/266.67

MA = 4.5

Hence he mechanical advantage of the hydraulic lift is 4.5

Answer:

about 2.7liters for women and 3.7liters for men

Explanation:

Answer:Electrical conduction is the transfer of electrically charged particles through a medium, such as electricity traveling through the power lines in your house. Sound conduction (or acoustic conduction) is the transfer of sound waves through a medium, such as vibrations from loud music passing through a wall.

Explanation: Trust

Answer:

An object is in notion if its position change with time.

Answer:

It follows that the magnitude in radians of one complete revolution (360 degrees) is the length of the entire circumference divided by the radius, or 2πr / r, or 2π. Thus 2π radians is equal to 360 degrees, meaning that one radian is equal to 180/π ≈ 57.295779513082320876 degrees.

Explanation:

Answer:corrosion (i believe)

Explanation:

Answer

Mix baking soda and salt with hot water and cover everything with it. The proportions are not crucial, but about 1 tablespoon of salt and 1 tablespoon of baking soda to 3 dl water should do the trick. Lightly tarnished objects should clean up in a few minutes, and you just rinse them of and dry them.

Explanation:

Letter B

without a medium, there is nothing to compress, hence, no wave. A fast- medium like a gas (air) is easy to compress and allows waves to move through it easily. a slow medium, like a liquid, is still pretty fast, but not as fast as air.

Answer:

(a) Luna

(b) Luna

Explanation:

(b)

The final speed can be found by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration

s = distance covered

vf = final speed

vi = initial speed

For Angela:

a = 2 m/s²

s = 30 m

vi = 4 m/s

vf = v_fa

therefore,

[tex]2(2\ m/s^2)(30\ m) = (v_{fa})^2 - (4\ m/s)^2\\v_{fa}^2 = 120 m^2/s^2 + 16\ m^2/s^2\\v_{fa} = 11.66\ m/s\\[/tex]

For Luna:

a = 3 m/s²

s = 30 m

vi = 3 m/s

vf = v_fl

therefore,

[tex]2(3\ m/s^2)(30\ m) = (v_{fa})^2 - (3\ m/s)^2\\v_{fa}^2 = 180 m^2/s^2 + 9\ m^2/s^2\\v_{fa} = 13.74\ m/s\\[/tex]

Therefore, Luna will be running faster at the end of the race.

(b)

To calculate the time of completion we will use the first equation of motion:

[tex]v_f = v_i + at[/tex]

FOR ANGELA:

[tex]11.66\ m/s = 4\ m/s + (2\ m/s^2)t_a\\t_a = \frac{7.66\ m/s}{2\ m/s^2}\\\\t_a = 3.83\ s[/tex]

FOR LUNA:

[tex]13.74\ m/s = 3\ m/s + (3\ m/s^2)t_l\\t_l = \frac{10.74\ m/s}{3\ m/s^2}\\\\t_l = 3.58\ s[/tex]

Hence, LUNA finishes the race first.

Answer:

t = 3 minutes

Explanation:

Given that,

Power of fan, P = 50 W

Energy used, E = 1 kWh

We know that,

Energy = Power/time

As, 50 watts = 0.05 kilowatts

So,

[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]

or

t = 3 min

So, the required time is equal to 3 minutes.

Answer:

A. respiration.

Explanation:

Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.

Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.

Basically, oxygen goes into the body of a living organism such as plants, humans and animals when they breathe while glucose is absorbed by the body when they eat.

Hence, the conversion of sugar to energy in the presence of oxygen is respiration.

Answer:

The answer of this question

Explanation:

a3.5 kg blowing ball that is rolling at 30 m/s

Answer:

D.) Blue

Explanation:

because Blue is a higher frequency and therefore corresponds to a higher energy level transition.

I hope this helped you :)

Answer:

True Edg2020

Explanation:

Answer: true

Explanation:

because I say so :P

Answer:

1, 2 and 3

Explanation:

The most dense substance will settle at the bottom of the cup

Answer:

La velocidad del sistema bala-bloque es 5 metros por segundo.

Explanation:

El enunciado tiene una omisión gramatical. La forma correcta es la siguiente:

Una bala de 0.8 kilogramos de masa se mueve horizontalmente con una velocidad de 30 metros por segundo y se introduce en un bloque de 4 kilogramos, inicialmente en reposo. ¿Cuál es la velocidad de la bala y el bloque después del impacto?

Esta situación es un caso clásico de colisión enteramente inelástica, en donde el sistema bala-bloque no tiene influencia de fuerzas externas, entonces la situación queda descrita por la siguiente ecuación:

[tex]m_{b}\cdot v_{b,o} = (m_{b}+m_{B})\cdot v[/tex] (1)

Donde:

[tex]m_{b}[/tex] - Masa de la bala, en kilogramos.

[tex]v_{b,o}[/tex] - Velocidad inicial de la bala, en metros por segundo.

[tex]m_{B}[/tex] - Masa del bloque, en kilogramos.

[tex]v[/tex] - Velocidad del sistema bala-bloque, en metros por segundo.

Si sabemos que [tex]v_{b,o} = 30\,\frac{m}{s}[/tex], [tex]m_{b} = 0.8\,kg[/tex] y [tex]m_{B} = 4\,kg[/tex], entonces la velocidad del sistema masa-bloque es:

[tex]v = \frac{m_{b}}{m_{b}+m_{B}}\cdot v_{b,o}[/tex]

[tex]v = 5\,\frac{m}{s}[/tex]

La velocidad del sistema bala-bloque es 5 metros por segundo.

Answer:

It will be reflected to the principal focus of the concave mirror

Explanation:

This is because all rays parallel and close to the principal axis of a concave mirror get reflected to the principal focus of the mirror.

For a ray to be parallel to the mirror, it must be coming from an infinite distance.

So, using the mirror formula,

1/u + 1/v = 1/f where u = object distance from mirror, v =image distance form mirror and f =focal length of mirror.

Since u = infinite distance = ∞

1/u + 1/v = 1/f

1/∞ + 1/v = 1/f

0 + 1/v = 1/f

1/v = 1/f

v = f

So, the image is at the principal focus.

So, the ray of light parallel to the principal axis of the concave mirror is reflected to the principal focus of the concave mirror.

Answer:

B

Explanation:

Answer:

Current = 0.063 Amperes

Explanation:

Let the three resistors be R1, R2, and R3 respectively.

Given the following data;

R1 = 25.0Ω,

R2 = 30.0Ω

R3 = 40.0Ω

Voltage = 6 Volts

First of all, we would determine the equivalent or total resistance;

Total resistance (in series) = R1 + R2 + R3

Total resistance = 25.0Ω + 30.0Ω + 40.0Ω

Total resistance = 95 Ω

Next, we find the current flowing through the circuit;

Voltage = current * resistance

Substituting into the formula, we have;

6 = current * 95

Current = 6/95

Current = 0.063 Amperes