Answer:
The planets of the solar system are 8:
Mercury is the planet closest to the sun, and therefore the hottest planet in stable conditions. It has an average temperature of 160º C, but with nights of up to -170º C. It is a rocky planet, and it does not have satellites. Its period of rotation around the sun is 88 days.
Venus is also a rocky planet, but considerably larger than Mercury. It has an average temperature of 460º C, due to its enormous atmospheric pressure, thus surpassing Mercury, which is even closer to the sun. Its rotation period is 225 days, and it does not have satellites either.
The Earth, our planet, is the only one with ideal conditions for the development of life: it has a rotation of 365 days, an average temperature of 15ºC and water in sufficient abundance to allow the development of oxygen-producing vegetation.
Mars, the last rocky planet in the chain, has a rotation period of 687 days, an average temperature of -46º C and minimal amounts of water. It has 2 satellites.
Then we have the gaseous planets, which are Jupiter, Saturn, Uranus, and Neptune. These do not have a solid surface, but are composed of gases (and portions of ice due to the extremely high temperature they have, from -120ºC to -220ºC) and enormous amounts of satellites. These are the least fit for life, due to their temperature and lack of solidity.
Answer:
Look below.
Explanation:
Mercury is the closest planet to the sun. It rotates slowly — about twice for every three orbits it completes. Slightly larger than Earth's moon, it is the smallest planet in the solar system. It has no moons, no rings, and an atmosphere so thin that scientists classify it as an exosphere.
The second planet from the sun, Venus is slightly smaller than Earth.The heat and pressure make the planet decidedly inhospitable to life.
Earth, the third planet from the sun and the largest terrestrial planet, is the only planet known to host living beings and the only one known to have liquid water on its surface. The atmosphere, made of mostly nitrogen, oxygen and carbon dioxide, is crucial to Earth's ability to support life.
Mars, the fourth planet from the sun.The red color of the surface comes from iron oxide or rust in the soil. The topography is characterized by large volcanoes and deep valleys, and Mars experiences frequent planet-wide wind storms. Some of the surface features of Mars, such as dry river beds, hint to the possibility that water previously existed on the planet and may still flow under the surface.
Jupiter
Jupiter is the largest planet in our solar system
Jupiter's mass is 318 times greater than Earth's. Jupiter’s magnetic field is 20,000 times stronger than Earth’s and it has the strongest radio emissions of any planet in the solar system. as of April 2011 has 63 known moons in orbit around it, the largest of which are Io, Europa, Ganymede and Calliso.
Saturn, the sixth planet from the sun, is also a gas giant, and it's most impressive feature as seen from afar is an extensive and complex ring system. The rings orbit the planet in a thin band about a mile thick. The radius of Saturn is about 9.5 times that of Earth, and instead of one paltry moon, it boasts 62. The interior of Saturn, like Jupiter, is made of mostly hydrogen and helium. Nearing the core, the intense pressure turns the gases into liquids and ultimately into a metallic form that conducts electricity.
While most planets spin on their axis with a slight tilt, the ice giant Uranus spins on an axis parallel to its orbit. With a diameter of 31,518 miles (50,723 kilometers), this cold planet is four times the size of Earth and is made of a large atmosphere of methane with a dense core of frozen methane. Uranus has a faint ring system and 27 moons in its orbit.
The blue planet Neptune is the farthest one from the sun and, like Uranus, is a very cold place. one year on Neptune is 165 Earth years. The atmosphere is mostly methane, which gives the planet its blue color. The cold interior of the planet is mainly methane ice. Like all the outer planets, Neptune, like Uranus, has a diameter roughly four times that of Earth. Thirteen moons and a faint ring system orbit the planet.
Saturn
Saturn has 53 named satellites
Saturn has the lowest density of any planet in our solar system. It has a rocky core composed of liquid metallic hydrogen and elements consistent with the primordial solar nebula (gaseous cloud) that formed the solar system. Saturn’s most prominent feature is its rings, first observed by Galileo in 1610. The rings are composed of millions of small particles of rock and ice, each having its own independent orbit around the planet. Although the other gas planets also have rings, it is not yet known why Saturn’s are so prominent.
Uranus
Uranus is the only gas giant with its equator at a right angle to its orbit. It was also the first planet to be discovered through a telescope. It has 13 known rings that are dark and composed of dust and particles up to 10 meters in diameter. Uranus has 5 large moons as well as 10 smaller ones that were discovered by the Voyager 2 probe. The methane in Uranus’s upper atmosphere is what gives the planet its blue color.
Neptune
Neptune’s existence was the first to be predicted by mathematical calculations before the planet was actually seen. Neptune's mass is approximately 17 times greater than Earth’s. Its winds can reach up to 2,000 km per hour, the fastest in the solar system.
A long cylindrical rod of diameter 200 mm with thermal conductivity of 0.5 W/m⋅K experiences uniform volumetric heat generation of 24,000 W/m3. The rod is encapsulated by a circular seeve having an outer diameter of 400 mm and a thermal conductivity of 4 W/m⋅K. The outer surface of the sleeve is exposed to cross flow air at 27∘C with a convection coefficient of 25 W/m2⋅K.
(a) Find the temperature at the interface between the rod and sleeve and on the outer surface.
(b) What is the temperature at the center of the rod?
Answer:
a, 71.8° C, 51° C
b, 191.8° C
Explanation:
Given that
D(i) = 200 mm
D(o) = 400 mm
q' = 24000 W/m³
k(r) = 0.5 W/m.K
k(s) = 4 W/m.K
k(h) = 25 W/m².K
The expression for heat generation is given by
q = πr²Lq'
q = π . 0.1² . L . 24000
q = 754L W/m
Thermal conduction resistance, R(cond) = 0.0276/L
Thermal conduction resistance, R(conv) = 0.0318/L
Using energy balance equation,
Energy going in = Energy coming out
Which is = q, which is 754L
From the attachment, we deduce that the temperature between the rod and the sleeve is 71.8° C
At the same time, we find out that the temperature on the outer surface is 51° C
Also, from the second attachment, the temperature at the center of the rod was calculated to be, 191.8° C
A 0.20 kg mass on a horizontal spring is pulled back 2.0 cm and released. If, instead, a 0.40 kg mass were used in this same experiment, the total energy of the system would A 0.20 mass on a horizontal spring is pulled back 2.0 and released. If, instead, a 0.40 mass were used in this same experiment, the total energy of the system would Be half as large. Double. Remain the same.
Answer:
The total mechanical energy does not change if the value of the mass is changed. That is, remain the same
Explanation:
The total mechanical energy of a spring-mass system is equal to the elastic potential energy where the object is at the amplitude of the motion. That is:
[tex]E=U=\frac{1}{2}kA^2[/tex] (1)
k: spring constant
A: amplitude of the motion = 2.0cm
As you can notice in the equation (1), the total mechanical energy of the system does not depend of the mass of the object. It only depends of the amplitude A and the spring constant.
Hence, if you use a mass of 0.40kg the total mechanical energy is the same as the obtained with a mas 0.20kg
Remain the same
After using a mass of 0.40 kg the total mechanical energy is the same as the obtained with a mass of 0.20 kg
If the object is at the amplitude of the motion, the total mechanical energy of a spring-mass system is equal to the elastic potential energy.
[tex]\bold {E = U =\dfrac 1{2} kA^2}[/tex]
Where,
k: spring constant
A: amplitude of motion = 2.0 cm
In the equation, the total mechanical energy only depends of the amplitude and the spring constant. It does not depend on the mass of the object. It
Therefore, after using a mass of 0.40 kg the total mechanical energy is the same as the obtained with a mass of 0.20 kg
To know more about mechanical energy,
https://brainly.com/question/15172211
If the magnitude of the magnetic field is 2.50 mT at a distance of 12.6 cm from a long straight current carrying wire, what is the magnitude of the magnetic field at a distance of 19.8 cm from the wire
Answer:
The magnetic field at a distance of 19.8 cm from the wire is 1.591 mT
Explanation:
Given;
first magnetic field at first distance, B₁ = 2.50 mT
first distance, r₁ = 12.6 cm = 0.126 m
Second magnetic field at Second distance, B₂ = ?
Second distance, r₂ = ?
Magnetic field for a straight wire is given as;
[tex]B = \frac{\mu I}{2 \pi r}[/tex]
Where:
μ is permeability
B is magnetic field
I is current flowing in the wire
r distance to the wire
[tex]Let \ \frac{\mu I}{2\pi} \ be \ constant; = K\\\\B = \frac{K}{r} \\\\K = Br\\\\B_1r_1 = B_2r_2\\\\B_2 =\frac{B_1r_1}{r_2} \\\\B_2 = \frac{2.5*10^{-3} *0.126}{0.198} \\\\B_2 = 1.591 *10^{-3}\ T\\\\B_2 = 1.591 \ mT[/tex]
Therefore, the magnetic field at a distance of 19.8 cm from the wire is 1.591 mT
A device for acclimating military pilots to the high accelerations they must experience consists of a horizontal beam that rotates horizontally about one end while the pilot is seated at the other end. In order to achieve a radial acceleration of 27.9 m/s2 with a beam of length 5.21 m , what rotation frequency is required
Answer: the angular frequency is 2.31 rad/s
Explanation:
The data we have is:
Radial acceleration A = 27.9 m/s^2
Beam length r = 5.21m
The radial acceleration is equal to the velocity square divided the radius of the circle (the lenght of the beam in this case)
And we can write the velocity as:
v = w*r where r is the radius of the circle, and w is the angular frequency.
w = 2pi*f
where f is the "normal" frequency.
So we have:
A = (v^2)/r = (r*w)^2/r = r*w^2
We can replace the values and find w.
27.9m/s^2 = 5.21m*w^2
√(27.9/5.21) = w = 2.31 rad/s
Question 4
3 pts
I am approaching a traffic light at a speed of 135 km/h when I suddenly notice that
the light is red. I slam on my brakes and come to a stop in 4.29 seconds. What is the
acceleration of the car as I screech to a complete stop? (Note that an object that slows down
simply has a negative acceleration.)
& show work please I want to also understand
Answer:
The deceleration of the car is [tex]\approx -0.065m/s^{2}[/tex]
Explanation:
to solve this, we will have to apply the knowledge that will be got from the equations of motion.
There are several equations of motion, and depending on the parameters given in the problem, we can choose the perfect equation that can best be used to solve the problem.
In this case, since we are given the velocity and time, and we are solving for the acceleration, we will use this formula
[tex]v = u +at[/tex]
where v= final velocity = 0
u = initial velocity = 135Km/h [tex]\approx 0.278 m/s[/tex]
t= time = 4.29 seconds.
[tex]a = \frac{v - u}{t}[/tex]
[tex]a =\frac{0-0.278}{4.29} \approx 0.065m/s^{2}[/tex]
Hence, the deceleration of the car is [tex]\approx -0.065m/s^{2}[/tex]
A 1.0-kg ball on the end of a string is whirled at a constant speed of 2.0 m/s in a horizontal circle of radius 1.5 m. What is the work done by the centripetal force during one revolution
Answer:
The work done by the centripetal force is always, zero.
Explanation:
The formula for the work done by a force on an object is given as follows:
W = F d Cos θ
where,
W = Magnitude of the Work Done
F = Force applied to the body
θ = Angle between the direction of force and direction of motion of the object
In case of the circular motion, the force is the centripetal force. The centripetal force is always directed towards the center of the circle. While, the object moves in a direction, which is tangential to the circle. Hence, the angle between them is always 90°. Therefore,
W = F d Cos 90°
W = F d (0)
W = 0 J
Hence, the work done by the centripetal force is always, zero.
The robot HooRU is lost in space, floating around aimlessly, and radiates heat into the depths of the cosmos at the rate of 13.1 W. HooRU's surface area is 1.55 m2 and the emissivity of its surface is 0.287. Ignoring the radiation that HooRU absorbs from the cold universe, what is HooRU's temperature T?
Answer:
The temperature is [tex]T = 168.44 \ K[/tex]
Explanation:
From the question ewe are told that
The rate of heat transferred is [tex]P = 13.1 \ W[/tex]
The surface area is [tex]A = 1.55 \ m^2[/tex]
The emissivity of its surface is [tex]e = 0.287[/tex]
Generally, the rate of heat transfer is mathematically represented as
[tex]H = A e \sigma T^{4}[/tex]
=> [tex]T = \sqrt[4]{\frac{P}{e* \sigma } }[/tex]
where [tex]\sigma[/tex] is the Boltzmann constant with value [tex]\sigma = 5.67*10^{-8} \ W\cdot m^{-2} \cdot K^{-4}.[/tex]
substituting value
[tex]T = \sqrt[4]{\frac{13.1}{ 0.287* 5.67 *10^{-8} } }[/tex]
[tex]T = 168.44 \ K[/tex]
A man stands on a platform that is rotating (without friction) with an angular speed of 1.2 rev/s; his arms are outstretched and he holds a brick in each hand.The rotational inertia of the system consisting of the man, bricks, and platform about the central vertical axis of the platform is 6.0 k g times m squared. If by moving the bricks the man decreases the rotational inertia of the system to 2.0 k g times m squared, what is the resulting angular speed of the platform in rad/s
Answer:
resulting angular speed = 3.6 rev/s
Explanation:
We are given;
Initial angular speed; ω_i = 1.2 rev/s
Initial moment of inertia;I_i = 6 kg/m²
Final moment of inertia;I_f = 2 kg/m²
From conservation of angular momentum;
Initial angular momentum = Final angular momentum
Thus;
I_i × ω_i = I_f × ω_f
Making ω_f the subject, we have;
ω_f = (I_i × ω_i)/I_f
Plugging in the relevant values;
ω_f = (6 × 1.2)/2
ω_f = 3.6 rev/s
Two metal spheres are hanging from nylon threads. When you bring the spheres close to each other, they tend to attract. Based on this information alone, discuss all the possible ways that the spheres could be charged. Is it possible that after the spheres touch, they will cling together? Explain.
Explanation:
In the given question, the two metal spheres were hanged with the nylon thread.
When these two spheres were brought close together, they attracted each other. The attraction between these spheres is the result of the opposite charges between them.
The possible ways by which these two metal spheres can be charged are by induction that is touching the metal or by rubbing them.
During induction, the same charges are transferred to each sphere. In this case, either both the spheres will be negatively charged or positively charged.
It is not possible that after the sphere touch each other they will cling together because the same charge repels each other and during touching, if one sphere is neutral, then the charged one will transfer the same charge. And as we know that same charge repel each other therefore they will repel each other.
While sitting in your car by the side of a country road, you see your friend, who happens to have an identical car with an identical horn, approaching you. You blow your horn, which has a frequency of 260 Hz; your friend begins to blow his horn as well, and you hear a beat frequency of 5.0 Hz. Part A How fast is your friend approaching you
Answer:
-6.49 m/s
Explanation:
This is doppler effect.
The equation is;
F_l = [(v + v_l)/(v + v_s)]F_s
Where;
F_l is frequency observed by the listener
v is speed of sound
v_l is speed of listener
v_s is speed of source of the sound
F_s is frequency of the source of the sound
In this question, the source of the sound is the moving vehicle.
Thus;
F_l = F_beat + F_s
We are given beat frequency (f_beat) as 5 Hz while source frequency (F_s) as 260 Hz.
So,
F_l = 5 + 260
F_l = 265 Hz
Since listener is sitting by car, thus; v_l = 0 m/s
Thus,from our doppler effect equation, let's make v_s the subject;
v_s = F_s[(v + v_l)/F_l] - v
Speed of sound has a value of v = 344 m/s
Thus;
v_s = 260[(344 + 0)/265] - 344
v_s = -6.49 m/s
This value is negative because the source is moving towards the listener
Cart A, with a mass of 0.20 kg, travels on a horizontal air trackat 3.0m/s and hits cart B, which has a mass of 0.40 kg and is initially traveling away from Aat 2.0m/s. After the collision the center of mass of the two cart system has a speed of:____________.A. zeroB. 0.33m/sC. 2.3m/sD. 2.5m/sE. 5.0m/s
Answer:
[tex]\large \boxed{\text{C. 2.3 m/s}}[/tex]
Explanation:
Data:
[tex]m_{\text{A} } = \text{0.20 kg};\,v_{\text{Ai}} = \text{3.0 m/s}\\m_{\text{B} } = \text{0.40 kg};\,v_{\text{Bi}} = \text{2.0 m/s}\\[/tex]
Calculation:
This is a perfectly inelastic collision. The two carts stick together after the collision and move with a common final velocity.
The conservation of momentum equation is
[tex]\begin{array}{rcl}m_{\text{A}}v_{\text{Ai}} +m_{\text{B}} v_{\text{Bi}}&=&(m_{\text{A}} + m_{\text{B}})v_{\text{f}}\\0.20\times 3.0 + 0.40\times 2.0 & = & (0.20 + 0.40)v_{\text{f}}\\0.60 + 0.80 & = & 0.60v_{\text{f}}\\1.40 & = & 0.60v_{\text{f}}\\v_{\text{f}}&=& \dfrac{1.40}{0.60}\\\\& = & \textbf{2.3 m/s}\\\end{array}\\\text{The centre of mass has a velocity of $\large \boxed{\textbf{2.3 m/s}}$}[/tex]
A swimmer of mass 64.38 kg is initially standing still at one end of a log of mass 237 kg which is floating at rest in water. He runs toward the other end of the log and dives off with a horizontal speed of 3.472 m/s relative to the water. What is the speed of the log relative to water after the swimmer jumps off
Answer:
0.9432 m/s
Explanation:
We are given;
Mass of swimmer;m_s = 64.38 kg
Mass of log; m_l = 237 kg
Velocity of swimmer; v_s = 3.472 m/s
Now, if we consider the first log and the swimmer as our system, then the force between the swimmer and the log and the log and the swimmer are internal forces. Thus, there are no external forces and therefore momentum must be conserved.
So;
Initial momentum = final momentum
m_l × v_l = m_s × v_s
Where v_l is speed of the log relative to water
Making v_l the subject, we have;
v_l = (m_s × v_s)/m_l
Plugging in the relevant values, we have;
v_l = (64.38 × 3.472)/237
v_l = 0.9432 m/s
A charged particle q moves at constant velocity through a crossed electric and magnetic fields (E and B, which are both constant in magnitude and direction). Write the magnitude of the electric force on the particle in terms of the variables given. Do the same for the magnetic force
Answer:
The magnitude of the electric force on the particle in terms of the variables given is, F = qE
The magnitude of the magnetic force on the particle in terms of the variables given is, F = q (v x B)
Explanation:
Given;
a charged particle, q
magnitude of electric field, E
magnitude of magnetic field, B
The magnitude of the electric force on the particle in terms of the variables given;
F = qE
The magnitude of the magnetic force on the particle in terms of the variables given;
F = q (v x B)
where;
v is the constant velocity of the charged particle
Answer:
The magnitude of the electric force acting on a charged particle moving through an electric field = |qE|
The magnitude of the magnetic force of a charged particle moving at a particular velocity through a magnetic field = |qv × B|
Explanation:
The electric force acting on a charged particle, q, moving through an electric field, E, is given as a product of the charge on the particle (a scalar quantity) and the electric field (a vector quantity).
Electric force = qE
The magnitude of the electric force = |qE|
That is, magnitude of the product of the charge and the electric field vector.
The magnetic force acting on a charged particle, q, moving with a velocity, v, through a magnetic field, B is a vector product of qv [a product of the charge of the particle (a scalar quantity) and the velocity of the particle (a vector quantity)] and B (a vector quantity).
It is given mathematically as (qv × B)
The magnitude of the magnetic force is the magnitude of the vector product obtained.
Magnitude of the magnetic force = |qv × B|
Hope this Helps!!!
A heavy, 6 m long uniform plank has a mass of 30 kg. It is positioned so that 4 m is supported on the deck of a ship and 2 m sticks out over the water. It is held in place only by its own weight. You have a mass of 70 kg and walk the plank past the edge of the ship. How far past the edge do you get before the plank starts to tip, in m
Answer:
about 1 meter
Explanation:
The distance past the edge that the man will get before the plank starts to tip is; 0.4285 m
We are given;
Mass of plank; m = 30 kg
Length of plank; L = 6m
Mass of man; M = 70 kg
Since the plank has 2 supports which are the deck of the ship, then it means that, we can take moments about the right support before the 2m stick out of the plank.
Thus;
Moment of weight of plank about the right support;
τ_p = mg((L/2) - 2)
τ_p = 30 × 9.8((6/2) - 2)
τ_p = 294 N.m
Moment of weight of man about the right support;
τ_m = Mgx
where x is the distance past the edge the man will get before the plank starts to tip.
τ_m = 70 × 9.8x
τ_m = 686x
Now, moment of the board is counterclockwise while that of the man is clockwise. Thus;
τ_m = τ_p
686x = 294
x = 294/686
x = 0.4285 m
Read more at; https://brainly.com/question/22150651
Set the battery to a value between 0.0 V and 1.5 V. Now drag the voltage meter toward the capacitor and move the red and black leads to measure the voltage. Determine the potential difference between the two plates and whether the top plate is at higher or lower voltage than the bottom plate
Answer:
the positive terminal has higher potential(voltage) than the negative. Any terminal at the positive terminal has higher potential
Explanation:
ΔV =Vtop - Vbottom
If the number of loops in a coil around a moving magnet doubles, the emf created:_________
a. Doubles
b. Halves
c. Remains the same
Answer is a. Doubles
when the loops are increased in the coil then the magnetic field created doubles
Light rays from stars bend toward smaller angles as they enter Earth's atmosphere. a. Explain why this happens using Snell's law and the speed of light. b. Where are the actual stars in relation to their apparent position as viewed from the Earth's surface?
Answer:
Following are the answer to this question:
Explanation:
In option (a):
The principle of Snells informs us that as light travels from the less dense medium to a denser layer, like water to air or a thinner layer of the air to the thicker ones, it bent to usual — an abstract feature that would be on the surface of all objects. Mostly, on the contrary, glow shifts from a denser with a less dense medium. This angle between both the usual and the light conditions rays is referred to as the refractive angle. Throughout in scenario, the light from its stars in the upper orbit, the surface area of both the Earth tends to increase because as light flows from the outer atmosphere towards the Earth, it defined above, to a lesser angle.In option (b):
Rays of light, that go directly down wouldn't bend, whilst also sun source which joins the upper orbit was reflected light from either a thicker distance and flex to the usual, following roughly the direction of the curve of the earth. Throughout the zenith specific position earlier in this thread, astronomical bodies appear throughout the right position while those close to a horizon seem to have been brightest than any of those close to the sky, and please find the attachment of the diagram.One kind of baseball pitching machine works by rotating a light and stiff rigid rod about a horizontal axis until the ball is moving toward the target. Suppose a 144 g baseball is held 82 cm from the axis of rotation and released at the major league pitching speed of 87 mph.
Required:
a. What is the ball's centripetal acceleration just before it is released?
b. What is the magnitude of the net force that is acting on the ball just before it is released?
Answer:
a. ac = 1844.66 m/s²
b. Fc = 265.63 N
Explanation:
a.
The centripetal acceleration of the ball is given as follows:
ac = v²/r
where,
ac = centripetal acceleration = ?
v = speed of ball = (87 mph)(1 h/ 3600 s)(1609.34 m / 1 mile) = 38.9 m/s
r = radius of path = 82 cm = 0.82 m
Therefore,
ac = (38.9 m/s)²/0.82 m
ac = 1844.66 m/s²
b.
The centripetal force is given as:
Fc = (m)(ac)
Fc = (0.144 kg)(1844.66 m/s²)
Fc = 265.63 N
Potential difference of a battery is 2.2 V when it is connected
across a resistance of 5 ohm, if suddenly the potential difference
falls to 1.8V, its internal resistance will be
Answer:
1.1ohms
Explanation:
According to ohms law E = IR
If potential difference of a battery is 2.2 V when it is connected across a resistance of 5 ohm and if suddenly the voltage Falls to 1.8V then the current in the 5ohms resistor I = V/R = 1.8/5
I = 0.36A (This will be the load current).
Before we can calculate the value of the internal resistance, we need to know the voltage drop across the internal resistance.
Voltage drop = 2.2V - 1.8V = 0.4V
Then we calculate the internal resistance using ohms law.
According to the law, V = Ir
V= voltage drop
I is the load current
r = internal resistance
0.4 = 0.36r
r = 0.4/0.36
r = 1.1 ohms
A satellite in the shape of a solid sphere of mass 1,900 kg and radius 4.6 m is spinning about an axis through its center of mass. It has a rotation rate of 8.0 rev/s. Two antennas deploy in the plane of rotation extending from the center of mass of the satellite. Each antenna can be approximated as a rod of mass 150.0 kg and length 6.6 m. What is the new rotation rate of the satellite (in rev/s)
Answer:
6.3 rev/s
Explanation:
The new rotation rate of the satellite can be found by conservation of the angular momentum (L):
[tex] L_{i} = L_{f} [/tex]
[tex] I_{i}*\omega_{i} = I_{f}*\omega_{f} [/tex]
The initial moment of inertia of the satellite (a solid sphere) is given by:
[tex] I_{i} = \frac{2}{5}m_{s}r^{2} [/tex]
Where [tex]m_{s}[/tex]: is the satellite mass and r: is the satellite's radium
[tex] I_{i} = \frac{2}{5}m_{s}r^{2} = \frac{2}{5}1900 kg*(4.6 m)^{2} = 1.61 \cdot 10^{4} kg*m^{2} [/tex]
Now, the final moment of inertia is given by the satellite and the antennas (rod):
[tex] I_{f} = I_{i} + 2*I_{a} = 1.61 \cdot 10^{4} kg*m^{2} + 2*\frac{1}{3}m_{a}l^{2} [/tex]
Where [tex]m_{a}[/tex]: is the antenna's mass and l: is the lenght of the antenna
[tex] I_{f} = 1.61 \cdot 10^{4} kg*m^{2} + 2*\frac{1}{3}150.0 kg*(6.6 m)^{2} = 2.05 \cdot 10^{4} kg*m^{2} [/tex]
So, the new rotation rate of the satellite is:
[tex] I_{i}*\omega_{i} = I_{f}*\omega_{f} [/tex]
[tex]\omega_{f} = \frac{I_{i}*\omega_{i}}{I_{f}} = \frac{1.61 \cdot 10^{4} kg*m^{2}*8.0 \frac{rev}{s}}{2.05 \cdot 10^{4} kg*m^{2}} = 6.3 rev/s[/tex]
Therefore, the new rotation rate of the satellite is 6.3 rev/s.
I hope it helps you!
A solenoidal coil with 23 turns of wire is wound tightly around another coil with 310 turns. The inner solenoid is 20.0 cm long and has a diameter of 2.20 cm. At a certain time, the current in the inner solenoid is 0.130 A and is increasing at a rate of 1800 A/s. For this time, calculate:
(a) the average magnetic flux through each turn of the inner solenoid;
(b) the mutual inductance of the two solenoids;
(c) the emf induced in the outer solenoid by the changing current in the inner solenoid.
Answer:
Explanation:
From the given information:
(a)
the average magnetic flux through each turn of the inner solenoid can be calculated by the formula:
[tex]\phi _ 1 = B_1 A[/tex]
[tex]\phi _ 1 = ( \mu_o \dfrac{N_i}{l} i_1)(\pi ( \dfrac{d}{2})^2)[/tex]
[tex]\phi _ 1 = ( 4 \pi *10^{-7} \ T. m/A ) ( \dfrac{310}{20*10^{-2} \ m }) (0.130 \ A) ( \pi ( \dfrac{2.20*10^{-2} \ m }{2})^ 2[/tex]
[tex]\phi_1 = 9.625 * 10^{-8} \ Wb[/tex]
(b)
The mutual inductance of the two solenoids is calculated by the formula:
[tex]M = 23 *\dfrac{9.625*10^{-8} \ Wb}{0.130 \ A}[/tex]
M = [tex]1.703 *10^{-5}[/tex] H
(c)
the emf induced in the outer solenoid by the changing current in the inner solenoid can be calculate by using the formula:
[tex]\varepsilon = -N_o \dfrac{d \phi_1}{dt}[/tex]
[tex]\varepsilon = -M \dfrac{d i_1}{dt}[/tex]
[tex]\varepsilon = -(1.703*10^{-5} \ H) * (1800 \ A/s)[/tex]
[tex]\varepsilon = -0.030654 \ V[/tex]
[tex]\varepsilon = -30.65 \ V[/tex]
What is the internal energy (to the nearest joule) of 10 moles of Oxygen at 100 K?
(Given, the universal gas constant = 8.315 J/(mol.k))
Answer:
U = 12,205.5 J
Explanation:
In order to calculate the internal energy of an ideal gas, you take into account the following formula:
[tex]U=\frac{3}{2}nRT[/tex] (1)
U: internal energy
R: ideal gas constant = 8.135 J(mol.K)
n: number of moles = 10 mol
T: temperature of the gas = 100K
You replace the values of the parameters in the equation (1):
[tex]U=\frac{3}{2}(10mol)(8.135\frac{J}{mol.K})(100K)=12,205.5J[/tex]
The total internal energy of 10 mol of Oxygen at 100K is 12,205.5 J
A block slides down a ramp with friction. The friction experienced by the block is 21 N. The mass of the block is 8 kg. The ramp is 6 meters long (meaning, the block slides across 6 meters of ramp with friction). The block is originally 2 meters vertically above the ground (the bottom of the ramp). What is the change in energy of the block due to friction, expressed in Joules
Complete Question
The complete question is shown on the first uploaded image
Answer:
the change in energy of the block due to friction is [tex]E = -126 \ J[/tex]
Explanation:
From the question we are told that
The frictional force is [tex]F_f = 21 \ N[/tex]
The mass of the block is [tex]m_b = 8 \ kg[/tex]
The length of the ramp is [tex]l = 6 \ m[/tex]
The height of the block is [tex]h = 2 \ m[/tex]
The change in energy of the block due to friction is mathematically represented as
[tex]\Delta E = - F_s * l[/tex]
The negative sign is to show that the frictional force is acting against the direction of the block movement
Now substituting values
[tex]\Delta E = -(21)* 6[/tex]
[tex]\Delta E = -126 \ J[/tex]
An object spins in a horizontal circle with a radius of 15.0 cm. The rotations are timed and the amount of time it takes for it to go around once is 0.56 s. The centripetal force is measured to be 6.1 N.According to the experiment, the speed of the object is closest to:'
Answer:
1.7 m/s
Explanation:
Relevant Data provided as per the question below:-
Radius = 15.0 cm
Time = 0.56 s.
Based on the above information
The computation of the speed of the object is shown below:-
[tex]Velocity = \frac{2\times \pi \times Radius}{Time}[/tex]
[tex]Velocity = \frac{2\times \frac{22}{7} \times 0.15}{0.56}[/tex]
[tex]= \frac{0.942857}{0.56}[/tex]
= 1.683 m/s
or
= 1.7 m/s
Therefore for computing the speed of the object or velocity we simply applied the above formula by considering the pi and all other given data
How much force is needed to cause a 15 kilogram bicycle to accelerate at a rate of 10
meters per second per second?
O A. 15 newtons
OB. 1.5 newtons
C. 150 newtons
OD. 10 newtons
A 50 gram meterstick is placed on a fulcrum at its 50 cm mark. A 20 gram mass is attached at the 12 cm mark. Where should a 40 gram mass be attached so that the meterstick will be balanced in rotational equilibrium
Answer:
The 40g mass will be attached at 69 cm
Explanation:
First, make a sketch of the meterstick with the masses placed on it;
--------------------------------------------------------------------------
↓ Δ ↓
20 g.................50 cm.................40g
38 cm y cm
Apply principle of moment;
sum of clockwise moment = sum of anticlockwise moment
40y = 20 (38)
40y = 760
y = 760 / 40
y = 19 cm
Therefore, the 40g mass will be attached at 50cm + 19cm = 69 cm
12cm 50 cm 69cm
--------------------------------------------------------------------------
↓ Δ ↓
20 g.................50 cm.................40g
38 cm 19 cm
A 4.5 kg ball swings from a string in a vertical circle such that it has constant sum of kinetic and gravitational potential energy. Ignore any friction forces from the air or in the string. What is the difference in the tension between the lowest and highest points on the circle
Answer:
88.29 N
Explanation:
mass of the ball = 4.5 kg
weight of the ball will be = mass x acceleration due to gravity(9.81 m/s^2)
weight W = 4.5 x 9.81 = 44.145 N
centrifugal forces Tc act on the ball as it swings.
At the top point of the vertical swing,
Tension on the rope = Tc - W.
At the bottom point of the vertical swing,
Tension on the rope = Tc + W
therefore,
difference in tension between these two points will be;
Net tension = tension at bottom minus tension at the top
= Tc + W - (Tc - W) = Tc + W -Tc + W
= 2W
imputing the value of the weight W, we have
2W = 2 x 44.145 = 88.29 N
A 25 kg box is 220 N pulled at constant speed up a frictionless inclined plane by a force that is parallel to the incline. If the plane is inclined at an angle of 25o above the horizontal, the magnitude of the applied force is
Answer:
F = 103.54N
Explanation:
In order to calculate the magnitude of the applied force, you take into account that the forces on the box are the applied force F and the weight of the box W.
The box moves with a constant velocity. By the Newton second law you have that the sum of forces must be equal to zero.
Furthermore, you have that the sum of forces are given by:
[tex]F-Wsin\theta=0[/tex] (1)
F: applied force = ?
W: weight of the box = Mg = (25kg)(9.8m/s^2) = 245N
θ: degree of the incline = 25°
You solve the equation (1) for F:
[tex]F=Wsin\theta=(245N)sin(25\°)=103.54N[/tex] (2)
The applied force on the box is 103.54N
The cart travels the track again and now experiences a constant tangential acceleration from point A to point C. The speeds of the cart are 4.50 m/s at point A and 5.00 m/s at point C. The cart takes 4.00 s to go from point A to point C, and the cart takes 1.60 s to go from point B to point C. What is the cart's speed at point B
Answer:
Vi = 4.8 m/s
Explanation:
First we need to find the magnitude of constant tangential acceleration. For that purpose we use the following formula between points A and C:
a = (Vf - Vi)/t
where,
a = constant tangential acceleration from A to C = ?
Vf = Final Velocity at C = 5 m/s
Vi = Initial Velocity at A = 4.5 m/s
t = time taken to move from A to C = 4 s
Therefore,
a = (5 m/s - 4.5 m/s)/4 s
a = 0.125 m/s²
Now, applying the same equation between points B and C:
a = (Vf - Vi)/t
where,
a = constant tangential acceleration from A to B = 0.125 m/s²
Vf = Final Velocity at C = 5 m/s
Vi = Initial Velocity at B = ?
t = time taken to move from B to C = 1.6 s
Therefore,
0.125 m/s² = (5 m/s - Vi)/1.6 s
Vi = 5 m/s - (0.125 m/s²)(1.6 s)
Vi = 4.8 m/s
A helium nucleus (charge = 2e, mass = 6.63 10-27 kg) traveling at 6.20 105 m/s enters an electric field, traveling from point circled A, at a potential of 1.50 103 V, to point circled B, at 4.00 103 V. What is its speed at point circled B?
Answer:
[tex]v_B=3.78\times 10^5\ m/s[/tex]
Explanation:
It is given that,
Charge on helium nucleus is 2e and its mass is [tex]6.63\times 10^{-27}\ kg[/tex]
Speed of nucleus at A is [tex]v_A=6.2\times 10^5\ m/s[/tex]
Potential at point A, [tex]V_A=1.5\times 10^3\ V[/tex]
Potential at point B, [tex]V_B=4\times 10^3\ V[/tex]
We need to find the speed at point B on the circle. It is based on the concept of conservation of energy such that :
increase in kinetic energy = increase in potential×charge
[tex]\dfrac{1}{2}m(v_A^2-v_B^2)=(V_B-V_A)q\\\\\dfrac{1}{2}m(v_A^2-v_B^2)={(4\times 10^3-1.5\times 10^3)}\times 2\times 1.6\times 10^{-19}=8\times 10^{-16}\\\\v_A^2-v_B^2=\dfrac{2\times 8\times 10^{-16}}{6.63\times 10^{-27}}\\\\v_A^2-v_B^2=2.41\times 10^{11}\\\\v_B^2=(6.2\times 10^5)^2-2.41\times 10^{11}\\\\v_B=3.78\times 10^5\ m/s[/tex]
So, the speed at point B is [tex]3.78\times 10^5\ m/s[/tex].