Answer:
The correct option is C) III. That is, the trout will suffer from disease.
Explanation:
Note: This question is not complete as the options are not included. The complete question with the options is therefore provided before answering the question as follows:
A lake is home to a large number of trout. Identify what is most likely to happen if a chemical is dumped into the lake.
I. The trout will not be affected by the pollution.
II. The number of trout will increase.
III. The trout will suffer from disease.
A) I
B) I and II
C) III
D) II and III
The explanation of the answer is now provided as follows:
Natural selection is the process that took place in the lake. Only those trouts that were fit to survive, or those that have alleles that allow them adapt to new conditions, live and multiply in the presence of an external environmental effect like pollution. In such a circumstance, the fittest organisms would have survived, and the population's allelic frequency would have grown through time. Due to pollution, creatures harboring the other alleles died, causing the total frequency of alleles to alter.
Therefore, the correct option is C) III. That is, the trout will suffer from disease.
A truck starts from rest with an acceleration of 0.3 m/ S^2 find its speed in km/h when it has moves through 150 m
Answer:
9.5 m/s
Explanation:
Distance, S = 150m
Acceleration, a = 0.3 m/s^2
Initial velocity, u = 0 m/s
Final velocity, v
Use kinematics equation
v^2 - u^2 = 2aS
v^2 - 0 = 2*0.3*150 = 90
v = sqrt(90) = 9.49 m/s
Do any of y’all know the answer to this? Please help, I’ve been stuck on this question forever
Answer:
I think it's B , maybe wrong tho....
I WILL MARK YOU THE BRAINLIEST NO LINKS
What type of friction is acting on the airplane?
sliding friction
static friction
fluid friction
rolling friction
Answer:
I believe it's sliding friction.
Explanation:
As shown in the diagram below, a 1 kg rock tied to a rope is
swung by a boy. This rock has a constant speed of 5 m/s,
and the length of the rope is 1 m. The rock's angular
momentum is
Answer:
Explanation:
Angular momentum has a formula of L = mvr. Fillingin:
L = (1.0)(5.0)(1.0)
L = 5.0 kg*m/s
A car is traveling at a speed of 20m/s and has a mass of 1200kg how much kinetic energy does it have
Answer:
Explanation:
The formula for Kinetic Energy is
[tex]KE=\frac{1}{2}mv^2[/tex]. Filling in:
[tex]KE=\frac{1}{2}(1200)(20)^2[/tex] It looks like we only need 1 significant digit here but I'll give you 2 and you can round how you want.
KE = 2.4 × 10⁵ J
Plz I need help with this work
sheet
Answer:
do it your self
Explanation:
Which of the following measurements has three significant figures
a. 0.0293 kg
b. 0.94 A
c. 5.321 V
d. 10.42 m
Answer:
b. 0.94 i think is the answer
a box of mass 4kg slides on the horizontal surface with kinetic frictional force of 8N. what coefficient of friction between the box and horizontal surface
Answer:
ų=0.8
Explanation:
F=mg
F=4×9.81=39.24N
Ff=Fn-F
=39.24-8=31.24
ų=Ff÷Fn
=31.24÷39.24
=0.8
HELP ME ASAP I WILL MARK YOU THE BRAINLIEST NO LINKS
Answer:
rolling friction is the lady in the forest
static friction is the man pushing the fridge
sliding friction is the snow kid
and fluid fraction is the bird I'm pretty sure
A cyclist rides at an average speed of 1.9 m/s for 3h 30min. How many kilometers does he travel
A football player kicks a football in a field goal attempt. When the football reaches its maximum height, what is the relationship between the direction of the velocity and acceleration vectors
Answer:
The correct answer is - At the maximum height, the velocity and acceleration vectors are perpendicular to each other.
Explanation:
When the football reaches maximum height, then the vertical component of velocity will be zero and therefore the only component of velocity left will be the horizontal component, and acceleration of the object will be downward, due to gravity.
So at the maximum height, there is horizontal velocity only which means velocity is horizontal and acceleration is vertical thus, the velocity and acceleration are perpendicular to each other.
Which of these describes a real image?
m = [1/√1-(v/c) 2 ]mo
An object whose rest mass is 2.0kg is accelerated to 0.9c. What is its relativistic mass?
Relativistic kinetic energy is KErel = (γ − 1)mc2. γ=1+1v22c2 γ = 1 + 1 v 2 2 c 2 . A binomial expansion is a way of expressing an algebraic quantity as a sum of an infinite series of terms.
Hope This Helps YouElectronic flash units for camera contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for 1675s with an average light power output of 2.70 x 105 W . (a) If the conversion of electric energy to light is 95% efficient ( the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash
Answer:
420J
Explanation:
Power is the time rate of change in energy. Power is the ratio of energy to time. The S.I unit of power is in watts.
Given that the flash lasts for 1/675 s, power output is 2.7 * 10⁵ W. Hence:
Power = Energy / time
Substituting:
2.7 * 10⁵ W = Energy / (1/675)
Energy = 2.7 * 10⁵ W * 1/675 = 400J
Therefore the energy emitted as light is 400J.
Since the conversion of electric energy to light is 95% efficient, hence the energy stored as electrical energy is:
Energy(capacitor) = 5% of 400J + 400J = 0.05*400 + 400
Energy(capacitor) = 420J
on a proton is 1.6×10`¹⁹. how many protons are in one coulomb of charge
Answer: There are [tex]6.25 \times 10^{18}[/tex] protons present in one coulomb of charge.
Explanation:
Given: Charge on proton = [tex]1.6 \times 10^{-19} C[/tex]
It is known that the charge on a proton is equal to the charge present on an electron.
Formula used to calculate number of protons is as follows.
Q = ne
where,
Q = charge considered
n = number of protons
e = charge on electron or proton
Substitute the values into above formula as follows.
[tex]Q = ne\\1 C = n \times 1.6 \times 10^{-19} C\\n = 0.625 \times 10^{19}\\= 6.25 \times 10^{18}[/tex]
Thus, we can conclude that there are [tex]6.25 \times 10^{18}[/tex] protons present in one coulomb of charge.
1. I get so much energy when I eat candy! What type of energy is this statement referring to?
O mechanical
O kinetic
O potential
O chemical
The answer is chemical
what is point mutation ?
Answer:
A point mutation or substitution is a genetic mutation where a single nucleotide base is changed, inserted or deleted from a DNA or RNA sequence of an organism's genome.
Hope it helps uHow much energy is transferred in 10 seconds with a current of 13 amperes and a potential difference of 230 volts?
29900 J
Explanation:
Recall that
P = VI
= (230 volts)(13 A)
= 2990 watts
Also,
E = Pt
= (2990 watts)(10 s)
= 29900 J
what is the power of a student that has done a work of 10 joules in 10 seconds
Answer:
1 Watt
Explanation:
P=W/t
P=10/10
P=1 Watt
Mark was traveling at 40 mph on a road with a drag factor of 0.85. His brakes were working at B0o/o efficiency. To the nearest tenth of a foot, what would you expect the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop
The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.
The given parameters:
Speed of Mark, v = 40 mphDrag factor, F = 0.85Working efficiency of the brake, n = 80%The average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is calculated as follows;
[tex]v = \sqrt{30 D fn} \\\\40 = \sqrt{30 \times D \times 0.85 \times 0.8} \\\\40 = \sqrt{20.4 D} \\\\40^2 = 20.4D\\\\1600 = 20.4 D\\\\D = \frac{1600}{20.4} \\\\D = 78.43 \ ft[/tex]
Thus, the average length of the skid marks to be if he applied his brakes in order to come to an immediate stop is 78.43 ft.
Learn more about length of a skid mark here: https://brainly.com/question/16914218
Electrical current is the flow of ____________
A) helium
B) protons
C) atoms
D) electrons
How much voltage is required to make 0.56 A flow through a 72-ohm resistance? [V = I x R]
A)48 V
B)36 V
C)40 V
D)52 V
WILL GIVE BRAINLIEST!!!
Solution :
A) Electric current is the flow of electrons .
B) We know, by ohm's law :
V = I × R
Putting given values in above equation, we get :
V = 0.56 × 72 V
V = 40.32 V
Hence, this is the required solution.
Physicist ____ was found to have completely made up some of the data on which his astounding discoveries were made.
Answer:
Jan Hendrik Schön I believe
Reason whether or not work is done in the following cases:
A. a basketball player shoots a free throw.
B. a peasant pulls a rope tied to a donkey without being able to displace it from its position.
Answer:
A work is done because the object moved
B no work is done because the donkey didnt move
Explanation:
walk done in units time is called
Answer:
Explanation:
work done per unit time is caleed power.it's SI unit is watt.it depends upon time.
‘The Universe is expanding.’ Justify this statement with the Big bang model of universe and Hubble’s Law.
Explanation:
The expansion of the universe is the increase in distance between any two given ... Metric expansion is a key feature of Big Bang cosmology, is modeled mathematically with the ...
If a positively charged rod is brought near the knob of a positively charged electroscope, the leaves of the electroscope will...
A) converge, only
B) diverge, only
C) first diverge, then converge
D) first converge, then diverge
Answer:
B
Explanation:
if a positively charged rod is brought near the knob of a neutral electroscope, it will attract some electrons up from the leaves onto the knob. That process causes both of the leaves to be positively charged (excess protons), and the leaves will diverge.
Two identical spheres a and b carry charges of +0.6 coulomb and -0.2 coulomb, respectively. If these spheres touch, the resulting charge on the first sphere will be...
A) + 0.8 C
B) + 0.2 C
C) - 0.3 C
D) + 0.4 C
Please hurry Describe why electric currents can be dangerous
Answer:
Cardiac Arrest, burns, and nerve damage.
Explanation:
Basically, the main risk is cardiac arrest, caused by the electric current interfering with the normal operation of the heart muscle. Other possible damages are burns due to the electric energy vaporizing the water inside the cells, and nerve damage caused by excessive current through the nerves.
How much larger is the diameter of Jupiter compared to the diameter of Saturn?
Warm air is less dense than cold air. The same is true of water. You decide to take a bath and turn on both the hot and cold faucets. When the tub is one-third full, you dip your hand in and discover the water is too cold. You turn the cold water faucet off and keep the hot water turned on. You leave the hot water running for ten minutes. When you return and dip your hand in, you discover that the water in the tub is different temperatures in different places. It is too hot close to the faucet and in a top layer across the entire tub. When you sit down, however, the water in the bottom of the tub is cold. Explain how this happens and why: • how the hot water ended up in a layer on the top and near the faucet. • why this is or is not a transfer of heat. • how the temperature of the water in the tub will change over time. • why you will eventually want to get out of the tub, considering the air and your porcelain enameled steel tub.
Answer:
Given that the warm water is less dense than the cold water, we have;
The cold water which is more dense than the warm water will remain settled in the lower part of the tub while particles of the less dense warm water will move above the cold water not being able to penetrate lower due of difference in their gravitational potential energiesThis is a case of (lack of) heat transfer due to inability of heat to penetrate into the lower layers and transfer the heat by conduction, from particle to particle, and therefore, one layer, the top remains warm while the other layer, the lower layer, remains coldWith time (over an hour) more and more warm water units will be able to penetrate deeper and make the lower layer warmer while the warm water at the top loses heat by evaporation to the atmosphere, until the entire water reaches equilibriumHeat will continue to be lost by evaporation to the air and by conduction through the porcelain to the steel tub until the water in the tub becomes coldExplanation: