knee flexion during stair descent exceeds knee flexion during walking, is this statement true or false

The claim is refuted -rotation curve 1, -rotation curve 3, -rotation curve 2 -supports Rotation Curve 4, Rotation Curve 6, and Rotation Curve 5

You can work every significant muscle area with Curves since it combines stretching, cardio, and upper- and lower-body strength training routines. It may be done by people of all fitness levels and employs hydraulic resistance gym equipment created specifically for ladies.

Although males are permitted to join in some jurisdictions, Curves fitness and weight reduction facilities are focused solely on and built for women. Competitors of the clubs include Spa Lady and Lucille Roberts, two chains that cater only to women.

To know more about Curves visit:

https://brainly.com/question/28793630

#SPJ4

As stated in the query, 14.57 m/s is the velocity at which one would go after descending 10 m in height.

A Frictionless Guest Experience: What Is It? Any stage in a customer's relationship with a business where they experience friction is when they run into a roadblock that brings them down or makes them unhappy. Customer gives seamless service, in the simplest fundamental way, entails monitoring their path and improving their encounter.

Here we can use the concept of mechanical energy conservation

Ui + KEi = Uf + KEf

mgh₁ + 1/2 mv²i = mgh₂ + 1/2 mv²f

Now we know that,

vi = 4m/s

m = 60kg

h₁ = 0m

h₂ = -10m As its going down

now from above equation we will have

n + 1/2(60)(1)² = (60)(9.81)(-10)+1/2(60)v²f

180 = -5886 + 30v²f

v²f = 212.2

vf = 14.57m/s

So his speed will be 14.57m/s

To know more about Frictionless visit:

https://brainly.com/question/11289241

#SPJ4

The statement that best describes the after effect of the ball is that the ball would be Less than 60 centimeters, as the ball transforms a part of its potential energy into heat energy. That is option A.

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

There are various types of energy which include the he following:

Potential energy is defined as the type of energy that is found in the body that is at rest. Therefore when the ball is dropped from a height, it would bounce with less than 60 centimetres as the potential energy is transformed to heat energy.

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

The velocity of the wave is 10m/s .

A wave's velocity is determined by multiplying its frequency by its wavelength. The wavelength of a wave is defined as the space between two successive crests or troughs, and the frequency is the reciprocal of the wavelength in time.

We are given that,

The distance between two consecutive wave = λ = 5cm

The no. of waves = n = 2

The velocity of the wave can be calculated by the formula,

ν = nλ

v = 2 ×​ 5 = 10cm/sec

Therefore the velocity of the wave would be 10 m/s .

To know more about wave

https://brainly.com/question/28277521

#SPJ4

When a metal car is struck by lightning, the resulting electric field inside the car is zero.

To know more about charges visit:

https://brainly.com/question/22674820

#SPJ4

The radius of the alpha particle's trajectory is 4.0 r.

An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

Given:  the mass of the alpha particle is four times that of the proton, and its charge is twice that of the proton.

After elastic collision, the speed of the  proton and the alpha particle will be in a ratio of 2: 1.

Let, the speed of the proton be2 v then the speed of the alpha particle be v.

So, the proton's trajectory is = 2mv/qB = 4.0 r

Hence, alpha particle's trajectory is = (4m×v)/(2qB)

=2mv/qB  

=4.0 r

= 4.0r.

Learn more about  elastic collisions here:

https://brainly.com/question/12941951

#SPJ1

The work done by a constant force f with arrow on a particle during a straight-line displacement d with arrow if the angle between f with arrow and d with arrow is 27° is positive.

Paintings done are elaborated in one way it consists of both forces exerted on the frame and the whole displacement of the frame. This block is preceded via a steady pressure F. The cause of this force is to move the frame a sure distance d in a direct route in the direction of the force.

To express this concept mathematically, the paintings W is identical to the pressure f times the gap d, or W = fd. If the force is being exerted at an attitude θ to the displacement, the paintings completed is W = FD cos θ.

The paintings accomplished through pressure are described to be the product of thing of the pressure inside the route of the displacement and the value of this displacement. formula. work can be calculated with the aid of multiplying force and Distance in the route of pressure as follows. W = F × d.

Learn more about work done here:-https://brainly.com/question/18363506

#SPJ4

The coefficient of friction between the cube and the ground is 0.177.

Friction is a shape of contact pressure. It exists between the surfaces that are in touch. The frictional force relies upon on the character of the floor in contact. The rougher the ground, the extra the friction is involved. The frictional force is proportional to the urgent pressure, that is the burden of the body. it's miles impartial of the place of the touch.

Calculation:-

F = ma

  = 54 × 1.3 m/s²

  = 70.2

force required = 164 N

so friction force = 164 - 70.2 N

                           = 93.8 N

normal force = mg

                      = 54 × 9.8

                      = 529.2 N

Friction force = μN

    μ = Friction force/N

        = 93.8 / 529.2

         = 0.177

Friction is the force resisting the relative motion of sturdy surfaces, fluid layers, and material factors sliding towards each specific. There are numerous styles of friction. Dry friction is a strain that opposes the relative lateral movement of two stable surfaces in touch.

Learn more about friction here:-https://brainly.com/question/24338873

#SPJ4

In water that was 22 °C in temperature, a tablet took an average of 28.3 seconds to dissolve.

Drugs are any chemicals that have an impact on how living creatures and the microbes that infect them (such as bacteria, fungi, and viruses) operate. The study of pharmaceuticals, or pharmacology, covers all facets of a drug's use in medicine, such as its mechanism of effect, physical & chemical characteristics, metabolism, treatments, and toxicity.

A drug is any substance that, when eaten, affects an organism's physiology or psychology. Foods and other items that aid in nourishment are typically kept apart from medications. Drugs can be ingested orally, smoked, injected, inhaled, applied topically with a patch and suppository, or broken down sublingually.

To know more about drug, visit:

https://brainly.com/question/20083654

#SPJ1

Answer:

51 seconded

Explanation:

A permanent magnetic substance be called a hard magnet.

Option C is correct.

Hard magnets, also referred to as permanent magnets can be described as those magnetic materials that retain their magnetism after being magnetized.

Examples of magnet function include the following:

Learn more about hard magnets at:  https://brainly.com/question/14256749

#SPJ1

The force that the gas applies to the container boundaries is known as the gas's pressure. Along the given volume, the gas molecules move at random.

They bump into the ground and each other as they move. The pressure of a gas is therefore a measurement of the average linear momentum of the moving molecules in a gas because the impact of each individual gas molecule is too minute and challenging to observe. The pressure exerted on the wall is normal to it and acts perpendicularly; the gas's viscosity affects the force's tangential (shear) component.

The quantity of gas particles, the capacity of the container, and the temperature of the gas all affect how much pressure is applied to a contained gas. The pressure will rise as the volume of gas particles in a container increases. The pressure will rise as a container's volume increases.

To learn more about pressure of the gas refer to:

https://brainly.com/question/29321317

#SPJ4

The maximum height attained by the projectile in terms of h is 12h/7.

The maximum height attained by the projectile is calculated by applying the following formula as shown below.

H = v² sin²θ / 2g

where;

H = ( v² ( sin 60 )² ) / 2g

H = ( v² x ³/₄ ) /2g

H = 3v² / 8g

To solve for the maximum height attained by the projectile in terms of h is calculated as follows;

vf² = vi² - 2gh

2gh = vi² - vf²

h = (vi² - vf²) /2g

where;

h = (v² - (3v/4)²) / 2g

h = (v² - 9v²/16) / 2g

h = (7v²/16) / 2g

h = 7v² / 32g

7v² = 32gh

v² = 32gh/7

The maximum height becomes;

H = 3v² / 8g

H = 3(32gh / 7) / 8g

H = (3 x 32 gh) / (7 x 8g)

H = 12 h / 7

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

To protect you from overhead power lines:

Keep a safe distance away from lines when working.

Ask the power company to ground and de-energize the electrical lines.

The only way to avoid being electrocuted is to wear PPE.

Have insulated sleeves, commonly referred to as "eels," installed over electricity wires by the utility provider.

What exactly do overhead power wires mean?

To carry electrical energy across long distances, an overhead power line is a structure used in electric power transmission and distribution. For three-phase power, it typically consists of one or more uninsulated electrical cables suspended from towers or poles.

The more precautions taken, the better in order to prevent the employee from being electrocuted by the electricity lines. The safety of the personnel must be ensured by taking all necessary precautions. Particularly when it comes to electrical wiring, problems might arise in a variety of ways.

To know more about overhead power wires  use link below:

https://brainly.com/question/13489356

#SPJ4

If a metal cools  while releasing 160 j of heat energy, its specific heat capacity is 1.4222 J/kg. In the event that the metal weighs 5.0 g

How is the change of specific heat calculated given the temperature?

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine how much heat is absorbed or lost by a sample (q).

T₁ = 225°C

T₂ = 25°C

q = -160 J

m = 5.0 g

As we know,

q = mcΔT

Now,

-160 = 5*c*(T₂-T₁)

-160 = 5*c*(25-225)

c = -160/5(-200)

c = 0.16 J/g°c.

How can you determine the ultimate temperature given the initial?

To calculate your substance's final heat, multiply the temperature change by the starting temperature.For instance, if your water started out at 24 degrees Celsius, it final

To know more about specific heat visit:

https://brainly.com/question/11297584

#SPJ4

A convex mirror can never provide more than one in magnification effect. This is so because a convex mirror's image of the thing is smaller than the object itself.

When an object is held 30 cm away from a convex mirror, the image it creates is half the size of the actual object. A convex mirror is a kind of spherical mirror in which the reflecting surface is the protruded portion of the sphere; in other words, the reflecting surface of these mirrors protrudes outward in the direction of the incident light source. Enlarging something's seeming size—rather than its actual size—is known as magnification. A calculated value known as "magnification" is used to measure this enlargement.

Learn more about convex mirror here

https://brainly.com/question/3627454

#SPJ4

The force in the biceps muscle increases as the arm is raised.

Weight lifting is an effective form of exercise for strengthening the biceps muscles. The biceps are the muscles located on the front of the upper arm and are responsible for flexing the arm and bending the elbow. As the weight lifter raises the arm, the force in the biceps muscle increases and the muscles become stronger.

Weight lifting can be beneficial for any individual looking to:

The muscle fibers in the biceps become stronger and more efficient as they are worked with weights. This helps to improve the range of motion of the arms and makes them more capable of performing daily tasks.

Learn more about Strengthening Biceps Muscles:

https://brainly.com/question/18905258

#SPJ4

If this glass is heated ice will turn into water

Explain forms of water.

Ice, water, and gas are all forms of water that can exist (vapour or gas). Ice, a solid, can melt into water with the addition of heat (a liquid). Ice forms when heat is removed from water, a liquid (a solid). We refer to a shift in a substance's state as occurring when liquid water becomes a solid or a gas. The molecules of the water don't change, even when its physical appearance does.

Solid water is what an ice block is. The ice turns into liquid water when heat (an energy source) is introduced. It's melted since it's at 0 degrees Celsius. If you keep heating the water, it will transform into water vapour, which is water that has turned gaseous.

To learn more about forms of water use link below:

https://brainly.com/question/28166145

#SPJ4

The displacer receives a stronger force as the liquid level rises, appears heavier to the device, which takes the dieting as an increment and sends the equal signal.

The balance of a creature floating for still water depends on Archimede's Principle, which asserts that such a body in a liquid suffers an upthrust proportional to the volume of the fluid expelled. Gravity exerts a downward force on a body that is free-floating in calm water.

The upward force that is applied to a body submerged in a fluid, whether wholly or partially, is equivalent to the mass of displaced fluid, according to Archimedes' principle (sometimes spelled Archimedes' principle). The Archimedes' rule is a fundamental physical law in fluid mechanics.

To know more about Archimedes' principle visit:

https://brainly.com/question/13106989

#SPJ4

Throughout the process, from a finite time before the collision to a finite time after the collision, the angular momentum of the rod and puck system is constant about any fixed point in space.

The condition of conservation of angular momentum of a system about a point is that net torque about that point of the system must be zero. The point that has zero net torque is any fixed point in space.

τ = I α

I = L / ω

τ = L ω / ω t

τ = L / t

Since L is constant, τ = 0

To know more about conservation of angular momentum

https://brainly.com/question/1597483

#SPJ4

Answer: physical characteristic during the formation of the solar system most significantly contributed to the distinction between the two types of planets

Instead, look for the crucial physical characteristic that, during the formation of the solar system, distinguished between the two kinds of planets.

Explanation: What characteristics does the solar system have in terms of physics?

Dimensions of the Solar System

The novice teacher lists the characteristics of the solar system's constituent parts. defining ideas The Sun is the centre of the solar system, which also includes planets, dwarf planets, moons, comets, asteroids, meteoroids, dust, atomic particles, electromagnetic radiation, and magnetic fields.

Which two broad categories would you say our solar system's planets fall under?

The two categories of planets—terrestrial and giant—are typically used to categorize them. The four inner planets make up the four terrestrial planets: Mercury,

To know more about solar system visit;

https://brainly.com/question/12075871?

#SPJ4

There are 10 identical machines could you add to the factory without exceeding the 85 dB limit.

Calculation:-

sound leve in decibel is:

β dB = 10 log ( I / Io )

where I is the intensity of sound

It is the relative intensity

72 = 10 logs ( I /10⁻¹²)

8  = log ( I /10⁻¹²)

10⁸  =  I / 10⁻¹²

I  =  10⁸ . 10⁻¹² =  10⁻⁴  W /m2

If the sound level is 85 dB, the number of identical machines is n.

85 = 10 logs ( n I / Io )

=  10 logs ( n . 10⁻⁴ / 10⁻¹² )

9  =  log ( n . 108 )

10⁹ = n. 10 8

n = 10.

so  n  = 10 .

Sounds below 70 dB are considered safe for hearing. This is the sound of a normal conversation between two people. A noise level of 80 or 85 dB will damage your hearing over time. 70 decibels is as loud as a washing machine or dishwasher. Medium noise level. 70 dB of noise is not considered harmful to human hearing.

Learn more about The sound level here:- https://brainly.com/question/17062836

#SPJ4

We are likely to acquire moderate-resolution photos and spectra of Earth-like planets around other stars in ten or twenty years thanks to space observatories that are currently in the planning phases.

What are stars ?

Large celestial bodies known as stars are primarily composed of hydrogen and helium and generate light and heat in their centres from churning nuclear forges. Only a very small portion of the tens of billions of trillions of stars in the observable cosmos are visible to the unaided eye.

The enormous volumes of radiation emanating from the planet's host star overwhelm any light reflected off the planet or heat radiation from the planet itself. The only way to find life on other planets is through the analysis of their spectra, which will enable us to find chemicals in other atmospheres and even look for surface features that might be signs of life.

To learn more about planets click here:

https://brainly.com/question/9544561

#SPJ4

The work done on the gas is 2.73 Joules and the change in internal energy of the system is -2.73 Joules.

The monoatomic gas is taken from 7.43L to 3.32L at a constant pressure of 0.293 atm.

(a) The work done for monoatomic gas is,

W = PΔV/(1-y)

P is pressure, V is volume and y is adiabatic constant which is 1.66 for monoatomic gas.

Putting values,

W = 0.293(3.32-7.73)/-0.44

W = 2.73 Joules.

So, the work done in this process is 2.73 Joules.

(b) In this process the change in internal energy is negative to the work done so, Change in internal energy of the system is -2.73 Joules.

To know more about Internal energy, visit,

https://brainly.com/question/25737117

#SPJ4

If a crossover 260 v/m magnetic field will render the path straight, then the value of q/m for a piece moving within a circle at size 6.8 mm in some kind of a 0.50 t magnetic field is 0.0982 T.m2.

The region around a magnet where the effects of magnetism are felt is known as the magnetic field. To describe that how magnetic force is dispersed in the area around and inside something magnetic in nature, we utilize the magnetic flux as a tool.

Briefing :

Given, magnitude of magnetic field, B = 0.5 T

radius of the loop, r = 6.88 m

Area  is given by;

A = πr²

A = 3.142 x (6.88)²

A = 148.72 m²

The magnitude of the magnetic flux through the loop is given by;

Ф = BA

Where;

B is the magnitude of the magnetic field

A is area of the field

Ф = 0.5 x 0.1964

Ф = 0.0982 T.m²

Therefore, the magnitude of the magnetic flux through the loop is 0.0982 T.m²

To know more about magnetic field visit:

https://brainly.com/question/24397546

#SPJ4

Among irregular galaxies, the large and small magellanic cloud are useful for astronomers to study because they are very close to us.

The Milky Way's satellite galaxies are the Large and Small Magellanic Clouds. They are large, misty blobs of light that stand out against the night sky as some of the nearest galaxies to our home galaxy.

According to estimates, there are about 3 billion stars in the Small Magellanic Cloud and 30 billion stars in the Large Magellanic Cloud.

The Large and Small Clouds are thought to have originated between 12 and 13 billion years ago, at around the same time as our Milky Way.

Great galactic tides may have shaped them irregularly due to their repeated interactions with the larger Milky Way galaxy.

Can learn more about irregular galaxies from: https://brainly.com/question/1241789

#SPJ4

(a) The maximum speed of emitted electrons is 5.67 x 10^−19 J

(b) The work function is 2 x 10^-19 eV and the metal is Cesium

It is given that

Wavelength of light = 350 nm

We have to find maximum speed and work function

(a)

We use the energy of a photon equation, which states that,

E = hf

h is Planck's constant, which is

h = 6.62 x 10^-34 Js

f is the frequency in hertz

So here:

f = c/λ

f = 3*10^8 m/s/3.5*10^-7 m

f = 8.57 x 10^14 Hz

E = 6.62 x 10^-34 Js x 8.57 x 10^14 Hz

E = 5.67 x 10^−19 J

(b)

Work Function = eVs where Vs is the stopping potential.

Vs = 1.25 V

e = 1.6 x 10^-19 C

Work function = 1.6 x 10^-19 C x 1.25 V

Work function = 2 x 10^-19 eV

Hence, the Cesium is the metal whose work function is 2 x 10^-19 eV

Maximum speed of emitted electrons is 5.67 x 10^−19 J

Learn more about Work function here:

https://brainly.com/question/19427469

#SPJ4

4.5 * 10⁷ J energy, in joules, is needed to make it oscillate with an amplitude of 0.095 m.

The highest payout of a current or voltage is its amplitude. Either of the diffraction signals of the sine wave can be used to symbolize it. The peak voltage is another name for this voltage level, which might be positive or negative. Positive and negative only describe the flow of current in one direction.

From the periodic motion  we know that the energy of the system :

E = 1/2 kA²

E is the system's energy reserve.

The spring's amplitude is denoted by A.

The spring constant is k.

A = 0.95 m

k = 1.1 × 10⁸

Putting in known data to obtain

E = 1/2 k A²

E = 1/ 2 * 100 * 10⁸ * 0.95²

E =  4.5 * 10⁷ J

To know more about Amplitude visit:

https://brainly.com/question/9525052

#SPJ4

Because a quick manifestation of charge is a monopole and electromagnetism theory states that a monopole cannot radiate, it cannot transmit electromagnetic waves.

Since electrons are always generated in pairs with positrons and the electron-positron dipole does broadcast its changing state as an electromagnetic wave at the speed of light, we actually never have to deal with this conundrum. Maxwell's equations reveal that all of space "knows" that a charge exists in the form of a field or a potential, both of which instantly fill space. Because these charges have always existed alongside their corresponding opposite charges, which may now be located elsewhere, this does not contradict the speed limit of light propagation.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4

The overall momentum of the system can be thought of as being conserved because the total momentum before and after the collision is the same. As a result, the system receives no net external impulse.

Momentum is a vector quantity that is influenced by the object's direction. During collisions between objects, momentum is a relevant concept. The total momentum before a collision between two objects equals the total momentum after the impact (in the absence of external forces).

The law of conservation of momentum is this. It holds true in every collision. According to the principle of momentum conservation, momentum is only modified by the action of forces as they are outlined by Newton's equations of motion; momentum is never created nor destroyed inside a problem domain.

For more questions like Momentum click the link below:

https://brainly.com/question/14283213

#SPJ4

A small car collides head-on with a large SUV, both vehicles undergo the same change in magnitude of momentum.

The collision also called effect, in physics, is the unexpected, forceful coming together in direct contact of bodies, which includes, for an instance,  billiard balls, a golf membership and a ball, a hammer and a nail head,  railroad automobiles while being coupled together, or a falling item and a floor.

Physicists use collisions to determine the houses of atomic and subatomic debris. Essentially, a particle accelerator is a device that provides a managed collision system among subatomic debris so that, amongst other things, some of the houses of the target particle can be studied. The maximum common motive of an automobile collision is distracted use.

Learn more about Collision here:-https://brainly.com/question/20628781

#SPJ4