Kate is pulling her doll in a wagon. Which arrow shows us the force of Kate pulling the wagon?

[tex]\mathfrak{\huge{\orange{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Force.

Force = Mass * Acceleration.

here, Mass = 45 kg and Force = 65 N

hence, Acceleration = 65/45

===> Acc. = 1.44 m/s^2

hence the acceleration is 1.44 m/s^2

Answer:

People have been aware of magnets and magnetism for thousands of years. The earliest records date back to ancient times, particularly in the region of Asia Minor called Magnesia—the name of this region is the source of words like magnet. Magnetic rocks found in Magnesia, which is now part of western Turkey, stimulated interest during ancient times. When humans first discovered magnetic rocks, they likely found that certain parts of these rocks attracted bits of iron or other magnetic rocks more strongly than other parts. These areas are called the poles of a magnet. A magnetic pole is the part of a magnet that exerts the strongest force on other magnets or magnetic material, such as iron. For example, the poles of the bar magnet shown in Figure 20.2 are where the paper clips are concentrated.

A bar magnet with paper clips attached to it.

Figure 20.2 A bar magnet with paper clips attracted to the two poles.

If a bar magnet is suspended so that it rotates freely, one pole of the magnet will always turn toward the north, with the opposite pole facing south. This discovery led to the compass, which is simply a small, elongated magnet mounted so that it can rotate freely. An example of a compass is shown Figure 20.3. The pole of the magnet that orients northward is called the north pole, and the opposite pole of the magnet is called the south pole.

Answer:

Yes, the coil of wire with current passing through it is a magnet.

Explanation:

Answer:

The force that must be exerted at the other end is 102.08 N/m₂

Explanation:

Using Pascal's formula; P₁ = P₂

P₁ = F₁/A₁ = m*g/(πr²)

m = 1500 kg; g = 9.8 m/s², r = 24 cm = 0.24 m

P₁ = (1500 * 9.8)/(22/7 * 0.24 * 0.24)

P₁ = 81235 N/m²

P₂ = F₂/A₂

A₂ = πr² where π = 22/7; r = 2.00 cm = 0.02m

A₂ = 22/7 * 0.02 * 0.02 = 0.00126 m²

P₂  = F₂ / 0.00126 m₂

substituting in the formula  P₁ = P₂

81235 N/m² =  F₂ / 0.00126 m²

F₂ = 81235 N/m² * 0.00126 m²

F₂ = 102.08 N/m₂

Explanation:

Answer:Why does water stop flowing out of the top hole even before the water level falls ... Calculate pressure on the bottom of the pool due to the water. 3. ... 2. If the ratio of A2 to A1 was 100, what force would be required to lift a 10000 N car? ... A cylinder with a radius of 11 cm and a height of 3.4 cm has a mass of 10.0 kg. a.

Explanation:

Answer:

1.lunar eclipse- happen when Earths shadow block the sun light

2.solar eclipse-A solar eclipse occurs when a portion of the Earth is engulfed in a shadow cast by the Moon which fully or partially blocks sunlight

3. lunar and solar eclipses occur with about equal frequency. Lunar eclipses are more widely visible because Earth casts a much larger shadow on the Moon during a lunar eclipse than the Moon casts on Earth during a solar eclipse. As a result, you are more likely to see a lunar eclipse than a solar eclipse.

Explanation:

Answer:

83790 J.

Explanation:

Potential Energy: This can be defined as the energy possessed by a body, by vitue of it position in the gravitational field. The S.I unit of Potential Energy is Joules (J).

From the question,

P.E = mgh........................................... Equation 1

Where P.E = potential Energy of the bell, m = mass of the bell, h = height of the tower, g = Acceleration due to gravity.

Given: m = 190 kg, h = 45 m.

Constant: g = 9.8 m/s²

Substitute these values into equation 1

P.E = 190×45×9.8

P.E = 83790 J.

Hence the potential energy of the bell is  83790 J.

[tex] \\ [/tex]

Renewable resources are natural resources that can be replaced in a relatively short period of time or are virtually limitless in supply. Renewable energy resources include wind, sunlight, moving water, biomass, and geothermal energy.

[tex] \\ [/tex]

Hope It Helps!

Answer:

true

Explanation:

Answer:

The moon has no atmosphere

Explanation:

The temperatures on the surface of the Moon vary much more than those on Earth because the moon has no atmosphere (third answer in the list), and therefore there are no molecules that could retain residual heat and make the change from day to night a softer transition.

Answer:

U = 1.84 10⁻²⁷ J

Explanation:

Electric potential energy is

        U = k q₁q₂/ r

in this case the electric charge is

         q = 2 p

         q = 2 1.6 10⁻¹⁹

         q = 3.2 10⁻¹⁹ C

indicate the distance between the charges is 0.500 m

we calculate

         U = 9 10⁹  3.2 10⁻¹⁹  3.2 10⁻¹⁹ /0.500

         U = 1.84 10⁻²⁷ J

Answer:

stars #3

Explanation:

they didn't know it was stars

Answer:

C. sodium combines with chlorine to form sodium chloride

Explanation:

Answer:

C. sodium combines with chlorine to form sodium chloride.

Explanation:

Given values are:

As we know the formula,

→ [tex]\Sigma f = ma[/tex]

or,

→ [tex]\Sigma f = \frac{mv^2}{r}[/tex]

By putting the values, we get

         [tex]= \frac{52\times 8^2}{1.6}[/tex]

         [tex]= \frac{52\times 64}{1.6}[/tex]

         [tex]= 2080 \ N[/tex]

Thus the response above is appropriate.

Learn more about force here:

https://brainly.com/question/14109330

the pressure exerted by the atmospheric air is called atmospheric pressure

Answer: normal

Explanation:

Explanation:

unable to understand ur question,,,sry!

Permanent magnets are important for their industrial uses especially when it comes to power generation and electric motors. The induction process for turbines and generators needs permanent magnets to turn mechanical motion into energy.

Exposing magnetized magnets to opposing external fields produces a demagnetizing effect. This effect is most apparent in permanent magnet materials having a non-linear demagnetization curve, such as Alnico. ... Other factors such as SHOCK and VIBRATION have very little effect on today's permanent magnet materials.

Answer:

carbon + oxygen → carbon dioxide

If energy is conserved, then initial (PE + KE) = final (PE + KE). So, the correct option is A.

The law of conservation of energy states that, energy can neither be created nor be destroyed, but can be transformed from one form to another.

Here,

According to law of conservation of energy,

The total energy of an isolated system remains constant. That means, the total energy of the system in the initial state will be same as that in the final state.

The total mechanical energy is the sum of kinetic energy and potential energy.

TE = KE + PE

Therefore, the energy to be conserved in the system,

Initial TE = Final TE

So, Initial (KE + PE) = Final (KE + PE)

Hence,

If energy is conserved, then initial (PE + KE) = final (PE + KE).

To learn more about law of conservation of energy, click:

https://brainly.com/question/29775341

#SPJ2

Answer:

Required distance is 103 miles and the required time is 1 hour

Explanation:

Given;

speed of the car, v = 103 miles per hour

Speed is the given as the ratio of distance traveled to time taken for the motion.

The distance it will take another car to catch up to them from a complete stop is 103 miles and the time it will take the car is 1 hour.

Therefore, required distance is 103 miles and the required time is 1 hour.

Answer:

  v = 11.7 m / s

Explanation:

For this exercise we can use the conservation of energy

starting point. Where you drop the stone

          Em₀ = K + U = ½ m v² + m g h₁

final point. Point where the stone arrives

          Em_f = U = mgh₂

We are assuming that there is no friction, so the energy is conserved

          Em₀ = Em_f

          ½ m v² + m g h₁ = m g h₂

         v² = 2g (h₂-h₁)

let's calculate

         v² = 2 9.8 (17 - 10)

         v = √137.2

         v = 11.7 m / s

Answer:

Radio

Explanation:

As the stonger the waves get the more compressed they get

Answer:

13

Explanation:

34

soooo

Explanation:

dont know

Answer:

Its 50 points for me but ok 100 4 u nice uh... here. Bringing the 1996 Summer Olympic Games to Atlanta was a long shot. Athens, Greece, was the sentimental favorite to host the centennial games, and tension was palpable as IOC President Juan Antonio Samaranch made the announcement back on Sept. 18, 1990.

"The International Olympic Committee has awarded the 1996 Olympic Games to the city of ... Atlanta," Samaranch revealed.

That announcement launched more than $1 billion of construction projects, from Olympic venues to housing for the athletes. Now, on the 15th anniversary of the games, Atlanta sees both gains and losses from the international event. Bringing the 1996 Summer Olympic Games to Atlanta was a long shot. Athens, Greece, was the sentimental favorite to host the centennial games, and tension was palpable as IOC President Juan Antonio Samaranch made the announcement back on Sept. 18, 1990.

"The International Olympic Committee has awarded the 1996 Olympic Games to the city of ... Atlanta," Samaranch revealed.

That announcement launched more than $1 billion of construction projects, from Olympic venues to housing for the athletes. Now, on the 15th anniversary of the games, Atlanta sees both gains and losses from the international event.

One of the most prominent legacies of the games is Centennial Olympic Park in the heart of Atlanta. The 21-acre plaza glistens in what was an area of urban decay, and children run and linger in the fountain.

Harvey Newman, a professor of public policy at Georgia State University, says the park brought economic development downtown.

"The area surrounding the park has added major hotels, condominiums, new office structures and, of course, people continue to flock to enjoy the Olympic rings fountain," Newman says.

Explanation:

Plz give brainliest and hearts and stars and hope i helped plz tell me! Your welcome! Have a great week! Get a good score!

Answer:

In the world of mechanics, there are four basic types of motion. These four are rotary, oscillating, linear and reciprocating. Each one moves in a slightly different way and each type of achieved using different mechanical means that help us understand linear motion and motion control

Answer:

1. v₂ = 12.43 m/s

2. I₁ = - 80 N.s

3. I₂ = 80 N.s

Explanation:

Consider the following data given in the question:

m₁ = mass of the Cart 1 = 16 kg

m₂ = mass of the Cart 2 = 7 kg

u₁ = velocity of cart 1 before collision = 4 m/s

u₂ = velocity of cart 2 before collision = 1 m/s

v₁ = velocity of cart 1 after collision = - 1 m/s

v₂ = velocity of cart 2 after collision = ?

1.

Applying the law of conservation of momentum:

[tex]m_{1}u_{1} + m_{2}u_{2} = m_{1}v_{1} + m_{2}v_{2}\\(16\ kg)(4\ m/s)+(7\ kg)(1\ m/s)=(16\ kg)(-1\ m/s)+(7\ kg)(v_{2})\\v_{2} = \frac{87\ kg.m/s}{7\ kg}[/tex]

v₂ = 12.43 m/s

2.

Impulse of cart 1 = I₁ = m₁(v₁ - u₁)

I₁ = (16 kg)(- 1 m/s - 4 m/s)

I₁ = - 80 N.s

3.

Impulse of cart 2 = I₂ = m₂(v₂ - u₂)

I₂ = (7 kg)(12.43 m/s - 1 m/s)

I₂ = 80 N.s

Answer:

2400 J

Explanation:

Latent heat: This is also called hidden heat, it is the heat that is not detectable by the thermometer.

From the question,

Q = cm.................. Equation 1

Where Q = Energy, c = specific latent heat of the liquid, m = mass of the liquid.

Given: c = 4000 J/kg, m = 600 g =( 600/1000) kg = 0.6 kg

Substitute these values into equation 1

Q = 4000×0.6

Q = 2400 J

Hence the energy required is 2400 J