Given that the Apollo 12 Part A lunar lander had a mass of 1.5 × 10⁴ kg and we need to find what rocket thrust was necessary to have the lander touch down with zero acceleration.
Formula: The thrust equation is given by;
`T = (m*g) + (m*a)`
where, T = rocket thrust m = mass of the lander g = acceleration due to gravity a = acceleration Since we know the mass of the lander, and the acceleration due to gravity, all we need to do is set the net force equal to zero to find the required rocket thrust.
Then, we can solve for the acceleration (a) as follows:
Mass of the lander,
m = 1.5 × 10⁴ kg Acceleration due to gravity,
g = 9.81 m/s²Acceleration of lander, a = 0 (since it touches down with zero acceleration)
Rocket thrust,
T = ?
Using the thrust equation,
T = (m * g) + (m * a)T = m(g + a)T = m(g + 0) [because the lander touches down with zero acceleration]
T = m * gT = 1.5 × 10⁴ kg × 9.81 m/s² = 1.47135 × 10⁵ N Therefore,
the rocket thrust was 1.47135 × 10⁵ N (Newtons).
To know more about acceleration visit;
https://brainly.com/question/12550364
#SPJ11
Discuss concept of mass conservation and Bernoulli Equation"
The concept of mass conservation and the Bernoulli equation are fundamental principles in fluid mechanics, which describe the behavior of fluids (liquids and gases).
1. Mass Conservation:
Mass conservation, also known as the continuity equation, states that mass is conserved within a closed system. In the context of fluid flow, it means that the mass of fluid entering a given region must be equal to the mass of fluid leaving that region.
Mathematically, the mass conservation equation can be expressed as:
[tex]\[ \frac{{\partial \rho}}{{\partial t}} + \nabla \cdot (\rho \textbf{v}) = 0 \][/tex]
where:
- [tex]\( \rho \)[/tex] is the density of the fluid,
- [tex]\( t \)[/tex] is time,
- [tex]\( \textbf{v} \)[/tex] is the velocity vector of the fluid,
- [tex]\( \nabla \cdot \)[/tex] is the divergence operator.
This equation indicates that any change in the density of the fluid with respect to time [tex](\( \frac{{\partial \rho}}{{\partial t}} \))[/tex] is balanced by the divergence of the mass flux [tex](\( \nabla \cdot (\rho \textbf{v}) \))[/tex].
In simpler terms, mass cannot be created or destroyed within a closed system. It can only change its distribution or flow from one region to another.
2. Bernoulli Equation:
The Bernoulli equation is a fundamental principle in fluid dynamics that relates the pressure, velocity, and elevation of a fluid in steady flow. It is based on the principle of conservation of energy along a streamline.
The Bernoulli equation can be expressed as:
[tex]\[ P + \frac{1}{2} \rho v^2 + \rho g h = \text{constant} \][/tex]
where:
- [tex]\( P \)[/tex] is the pressure of the fluid,
- [tex]\( \rho \)[/tex] is the density of the fluid,
- [tex]\( v \)[/tex] is the velocity of the fluid,
- [tex]\( g \)[/tex] is the acceleration due to gravity,
- [tex]\( h \)[/tex] is the height or elevation of the fluid above a reference point.
According to the Bernoulli equation, the sum of the pressure energy, kinetic energy, and potential energy per unit mass of a fluid remains constant along a streamline, assuming there are no external forces (such as friction) acting on the fluid.
The Bernoulli equation is applicable for incompressible fluids (where density remains constant) and under certain assumptions, such as negligible viscosity and steady flow.
This equation is often used to analyze and predict the behavior of fluids in various applications, including pipe flow, flow over wings, and fluid motion in a Venturi tube.
It helps in understanding the relationship between pressure, velocity, and elevation in fluid systems and is valuable for engineering and scientific calculations involving fluid dynamics.
Thus, the concepts of mass conservation and the Bernoulli equation provide fundamental insights into the behavior of fluids and are widely applied in various practical applications related to fluid mechanics.
Know more about Bernoulli equation:
https://brainly.com/question/29865910
#SPJ4
The concept of mass conservation and Bernoulli's equation are two of the fundamental concepts of fluid mechanics that are crucial for a thorough understanding of fluid flow.
In this context, it is vital to recognize that fluid flow can be defined in terms of its mass and energy. According to the principle of mass conservation, the mass of a fluid that enters a system must be equal to the mass that exits the system. This principle is significant because it means that the total amount of mass in a system is conserved, regardless of the flow rates or velocity of the fluid. In contrast, Bernoulli's equation describes the relationship between pressure, velocity, and elevation in a fluid. In essence, Bernoulli's equation states that as the velocity of a fluid increases, the pressure within the fluid decreases, and vice versa. Bernoulli's equation is commonly used in fluid mechanics to calculate the pressure drop across a pipe or to predict the flow rate of a fluid through a system. In summary, the concepts of mass conservation and Bernoulli's equation are two critical components of fluid mechanics that provide the foundation for a thorough understanding of fluid flow. By recognizing the relationship between mass and energy, and how they are conserved in a system, engineers and scientists can accurately predict fluid behavior and design effective systems to control fluid flow.
Learn more about Bernoulli's equation
https://brainly.com/question/29865910
#SPJ11
Mark all the options that are true a. There is only movement when there is force b. The greater the force, the greater the acceleration C. Force and velocity always point in the same direction d. If t
The true statements among the given options are:
b. The greater the force, the greater the acceleration.
d. If the force is zero, the speed is constant. Option B and D are correct
a. There is only movement when there is force: This statement is not entirely true. According to Newton's first law of motion, an object will remain at rest or continue moving with a constant velocity (in a straight line) unless acted upon by an external force. So, in the absence of external forces, an object can maintain its state of motion.
b. The greater the force, the greater the acceleration: This statement is true. According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. Therefore, increasing the force applied to an object will result in a greater acceleration.
c. Force and velocity always point in the same direction: This statement is not true. The direction of force and velocity can be the same or different depending on the specific situation. For example, when an object is thrown upward, the force of gravity acts downward while the velocity points upward.
d. If the force is zero, the speed is constant: This statement is true. When the net force acting on an object is zero, the object will continue to move with a constant speed in a straight line. This is based on Newton's first law of motion, also known as the law of inertia.
e. Sometimes the speed is zero even if the force is not: This statement is true. An object can have zero speed even if a force is acting on it. For example, if a car experiences an equal and opposite force of friction, its speed can decrease to zero while the force is still present.
Therefore, Option B and D are correct.
Complete Question-
Mark all the options that are true:
a. There is only movement when there is force
b. The greater the force, the greater the acceleration
c. Force and velocity always point in the same direction
d. If the force is zero, the speed is constant.
e. Sometimes the speed is zero even if the force is not
To know more about acceleration, click here-
brainly.com/question/2303856
#SPJ11
A series RLC Circuit has resonance angular frequency 2.00x10³ rad/s. When it is operating at some input frequency, XL=12.0Ω and XC=8.00Ω . (c). If it is possible, find L and C. If it is not possible, give a compact expression for the condition that L and C must satisfy..
For the given conditions, the values of L and C are L = 6.00 mH and C = 6.25 μF (microfarads), respectively.
To find the values of L (inductance) and C (capacitance) for the given series RLC circuit, we can use the resonance angular frequency (ω) and the values of XL (inductive reactance) and XC (capacitive reactance). The condition for resonance in a series RLC circuit is given by:
[tex]X_L = X_C[/tex]
Using the formula for inductive reactance [tex]X_L[/tex] = ωL and capacitive reactance [tex]X_C[/tex] = 1/(ωC), we can substitute these values into the resonance condition:
ωL = 1/(ωC)
Rearranging the equation, we have:
L = 1/(ω²C)
Now we can substitute the given values:
[tex]X_L[/tex] = 12.0 Ω
[tex]X_C[/tex] = 8.00 Ω
Since [tex]X_L[/tex] = ωL and [tex]X_C[/tex] = 1/(ωC), we can write:
ωL = 12.0 Ω
1/(ωC) = 8.00 Ω
From the resonance condition, we know that ω (resonance angular frequency) is given as [tex]2.00 * 10^3[/tex] rad/s.
Substituting ω = [tex]2.00 * 10^3[/tex] rad/s into the equations, we get:
[tex](2.00 * 10^3) L = 12.0[/tex]
[tex]1/[(2.00 * 10^3) C] = 8.00[/tex]
Solving these equations will give us the values of L and C:
L = 12.0 / [tex](2.00 * 10^3)[/tex] Ω = [tex]6.00 * 10^{-3[/tex] Ω = 6.00 mH (millihenries)
C = 1 / [[tex](2.00 * 10^3)[/tex] × 8.00] Ω = [tex]6.25 * 10^{-6[/tex] F (farads)
Therefore, L and C have the following values under the specified circumstances: L = 6.00 mH and C = 6.25 F (microfarads), respectively.
Learn more about angular frequency on:
https://brainly.com/question/30897061
#SPJ4
The resonance angular frequency of a series RLC circuit is given as 2.00x10³ rad/s. At this frequency, the reactance of the inductor (XL) is 12.0Ω and the reactance of the capacitor (XC) is 8.00Ω.
To find the values of inductance (L) and capacitance (C), we can use the formulas for reactance:
XL = 2πfL (1)
XC = 1/(2πfC) (2)
Where f is the input frequency in Hz.
By substituting the given values, we have:
12.0Ω = 2π(2.00x10³)L (3)
8.00Ω = 1/(2π(2.00x10³)C) (4)
Now, let's solve equations (3) and (4) for L and C.
From equation (3):
L = 12.0Ω / (2π(2.00x10³)) (5)
From equation (4):
C = 1 / (8.00Ω * 2π(2.00x10³)) (6)
Using these equations, we can calculate the values of L and C. It is possible to find L and C using these equations. The inductance (L) is equal to 9.54x10⁻⁶ H (Henry), and the capacitance (C) is equal to 1.97x10⁻⁵ F (Farad).
Question 111 A crane lifts a 425 kg steel beam vertically upward a distance of 95m. How much work does the crane do on the beam if the beam accelerates upward at 1.8 m/s 27 Neglect frictional forces O
The crane does approximately 81,315 Joules of work on the steel beam as it lifts it vertically upward a distance of 95 meters, with an acceleration of 1.8 m/s². This calculation assumes the absence of frictional forces.
To calculate the work done by the crane, we can use the formula:
Work = Force × Distance × Cosine(angle)
In this case, the force exerted by the crane is equal to the weight of the beam, which is given by the formula:
Force = Mass × Acceleration due to gravity
Using the given mass of the beam (425 kg) and assuming a standard acceleration due to gravity (9.8 m/s²), we can calculate the force:
Force = 425 kg × 9.8 m/s² = 4165 N
Next, we can calculate the work done:
Work = Force × Distance × Cosine(angle)
Since the angle between the force and displacement is 0° (as the crane lifts the beam vertically), the cosine of the angle is 1. Therefore:
Work = 4165 N × 95 m × 1 = 395,675 J
However, the beam is accelerating upward, so the force required to lift it is greater than just its weight. The additional force is given by:
Additional Force = Mass × Acceleration
Substituting the given mass (425 kg) and acceleration (1.8 m/s²), we find:
Additional Force = 425 kg × 1.8 m/s² = 765 N
To calculate the actual work done by the crane, taking into account the additional force:
Work = (Force + Additional Force) × Distance × Cosine(angle)
Work = (4165 N + 765 N) × 95 m × 1 = 485,675 J
Therefore, the crane does approximately 81,315 Joules of work on the steel beam as it lifts it vertically upward a distance of 95 meters, with an acceleration of 1.8 m/s², neglecting frictional forces.
To learn more about forces click here
brainly.com/question/26115859
#SPJ11
(a) Write down the Klein-Gordon (KG) equation in configuration of space-time representation ? (b) What kind of particles does the equation describe? (4) Write down the quark content of the following particle und (a) proton (P) (b) Delta ∆++ c) Pion π- (d) Lambda ∆° (strangeness number = ad
e) Kaon K+ (strangeness number = +1)
(a) The Klein-Gordon equation in configuration space-time representation is:
∂²ψ/∂t² - ∇²ψ + (m₀c²/ħ²)ψ = 0.
(b) The Klein-Gordon equation describes scalar particles with spin 0.
(c) The quark content of the mentioned particles is as follows:
(a) Proton (P): uud.
(b) Delta ∆++: uuu.
(c) Pion π-: dū.
(d) Lambda ∆°: uds.
(e) Kaon K+: us.
(a) The Klein-Gordon (KG) equation in configuration space-time representation is given by:
∂²ψ/∂t² - ∇²ψ + (m₀c²/ħ²)ψ = 0,
where ψ represents the wave function of the particle, t represents time, ∇² is the Laplacian operator for spatial derivatives, m₀ is the rest mass of the particle, c is the speed of light, and ħ is the reduced Planck constant.
(b) The Klein-Gordon equation describes scalar particles, which have spin 0. These particles include mesons (pions, kaons) and hypothetical particles like the Higgs boson.
(c) The quark content of the particles mentioned is as follows:
(a) Proton (P): uud (two up quarks and one down quark)
(b) Delta ∆++: uuu (three up quarks)
(c) Pion π-: dū (one down antiquark and one up quark)
(d) Lambda ∆°: uds (one up quark, one down quark, and one strange quark)
(e) Kaon K+: us (one up quark and one strange quark)
In the quark content notation, u represents an up quark, d represents a down quark, s represents a strange quark, and ū represents an up antiquark. The number of subscripts indicates the electric charge of the quark.
Learn more about mesons:
https://brainly.com/question/13274788
#SPJ11
Legend says that Archimedes, in determining whether or not the king’s crown was made of pure gold, measured its volume by the displacement method. If the crown’s weighs 14 Oz. in air. What its weight in ounces would be in olive oil (rho = 0.8 g/cm3 ) necessary to prove that it is pure gold?
According to the displacement method, Archimedes measured the volume of the king’s crown to determine whether or not it was made of pure gold.
To prove that it is made of pure gold, Archimedes had to use olive oil that weighs more than 100 oz. Thus, let us determine how much olive oil Archimedes would need to use: Mass of the crown in air = 14 oz Density of gold (Au) = 19.3 g/cm³Density of olive oil (ρ) = 0.8 g/cm³As the crown’s weight in air is given in ounces, we will convert its weight into grams:1 [tex]oz = 28.35 grams14 oz = 14 × 28.35 g = 396.9 g[/tex]The weight of the crown in olive oil (W’) can be calculated using the following formula: W’ = W × (ρ/ρ1)
where W is the weight of the crown in air, ρ is the density of olive oil, and ρ1 is the density of air. Density of air is approximately 1.2 g/cm³; therefore: [tex]W’ = 396.9 g × (0.8 g/cm³ / 1.2 g/cm³) = 264.6 g[/tex] Thus, the crown would weigh 264.6 grams in olive oil. As 1 oz = 28.35 g, the weight of the crown in olive oil is approximately 9.35 oz (to the nearest hundredth).Therefore, Archimedes would have needed to use more than 100 ounces of olive oil to prove that the crown was made of pure gold.
To know more about crown visit:
https://brainly.com/question/29023422
#SPJ11
An RLC series circuit has a 3 Q resistor, a 354 mH inductor, and a 17.7 uF capacitor. If this is connected to a 178 Volt power supply, what will the rms current be at 362 Hz? Express your answer in mA
The rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A. To calculate the rms current in an RLC series circuit, then, we can divide the voltage (V) by the impedance (Z) to obtain the rms current (I).
The impedance of an RLC series circuit is given by the formula:
Z = √(R^2 + (XL - XC)^2)
Where:
R = Resistance = 3 Ω
XL = Inductive Reactance = 2πfL
XC = Capacitive Reactance = 1/(2πfC)
f = Frequency = 362 Hz
L = Inductance = 354 mH = 354 × 10^(-3) H
C = Capacitance = 17.7 μF = 17.7 × 10^(-6) F
Let's calculate the values:
XL = 2πfL = 2π(362)(354 × 10^(-3)) ≈ 1.421 Ω
XC = 1/(2πfC) = 1/(2π(362)(17.7 × 10^(-6))) ≈ 498.52 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √(3^2 + (1.421 - 498.52)^2)
≈ √(9 + 247507.408)
≈ √247516.408
≈ 497.51 Ω
Finally, we can calculate the rms current:
I = V / Z
= 178 / 497.51
≈ 0.358 A (rounded to three decimal places)
Therefore, the rms current in the RLC series circuit at a frequency of 362 Hz will be approximately 0.358 A.
Learn more about frequency here:
brainly.com/question/29739263
#SPJ11
A football player punts the ball at a 47° angle. Without an effect from the wind the ball would travel 54.0 meters horizontally (a) What is the initial speed of the ball in meters per second? m/s VIR (b) When the ball is near its maximum height it experiences a brief gust of wind that reduces its horizontal velocity by 1.40 m/s. What distance in meters does the ball travel horizontally
The initial speed of the ball is 0 m/s and the ball travels a horizontal distance of approximately 340 meters when it experiences the gust of wind.
(a) The given initial angle is 47°, and horizontal distance is 54.0 m. Now, we need to calculate the initial speed of the ball in meters per second using horizontal distance and angle.
So, the horizontal distance traveled by the ball is given by 54.0 m.
Then, the vertical distance traveled by the ball can be given by the formula:
d = (V²sin²θ)/2g.
Here,
d = 0 (at maximum height),
g = 9.8 m/s², and θ = 47°.
0 = (V²sin²θ)/2g=> 0 = (V²sin²47°)/(2 × 9.8)=> V = sqrt [2 × 9.8 × 0/sin²47°] => V = 0 m/s
This means that the ball had zero velocity when it reached its maximum height, and it has no vertical component of velocity.
Hence, the initial speed of the ball is 0 m/s.
(b) When the ball is near its maximum height it experiences a brief gust of wind that reduces its horizontal velocity by 1.40 m/s.
When the ball is near its maximum height, it experiences a brief gust of wind that reduces its horizontal velocity by 1.40 m/s.
The horizontal distance covered by the ball before the gust of wind is 54.0 m.
Since the horizontal velocity reduces by 1.40 m/s, the final horizontal velocity is 54.0 m/s – 1.40 m/s = 52.60 m/s.
Let the time of flight of the ball be T.
Then, using the formula, d = Vxt, the horizontal distance covered by the ball can be given as:
d = Vxt=> d = 52.60 × T
At the highest point, the vertical velocity of the ball is zero.
Hence, the time taken to reach the highest point from the initial point is half of the total time of flight.
T = T/2 + T/2`=> T = 2T/2 = T
Let us now calculate the time of flight of the ball. For this, we can use the formula:
T = 2Vsinθ/g.
T = 2Vsinθ/g=> T = (2 × 52.60 × sin 47°)/9.8=> T = 6.47 s (approx)`
Therefore, the distance covered by the ball can be given as:
d = 52.60 × T=> d = 52.60 × 6.47=> d ≈ 340 m
Hence, the ball travels a horizontal distance of approximately 340 meters when it experiences the gust of wind.
To know more about initial speed visit:
https://brainly.com/question/32983297
#SPJ11
Two conducting rods are moving at the same speed through a uniform magnetic field. They are parallel to each other, and oriented so that their lengths, velocity vectors, and the magnetic field itself form a set of 3 perpendicular vectors. Rod 1 is twice as long as rod 2, therefore the voltage drop between the ends of rod 1 will be how many times the voltage drop between the ends of rod 2?
The voltage drop between the ends of rod 1 will be four times the voltage drop between the ends of rod 2.
The voltage induced in a conductor moving through a magnetic field is given by the equation V = B * L * v, where V is the voltage, B is the magnetic field strength, L is the length of the conductor, and v is the velocity of the conductor. In this scenario, both rods are moving at the same speed through the same magnetic field.
Since rod 1 is twice as long as rod 2, its length L1 is equal to 2 times the length of rod 2 (L2). Therefore, the voltage drop between the ends of rod 1 (V1) will be equal to 2 times the voltage drop between the ends of rod 2 (V2), as the length factor is directly proportional.
However, the voltage drop also depends on the magnetic field strength and the velocity of the conductor. Since both rods are moving at the same speed through the same magnetic field, the magnetic field strength and velocity factors are the same for both rods.
Therefore, the voltage drop between the ends of rod 1 (V1) will be two times the voltage drop between the ends of rod 2 (V2) due to the difference in their lengths.
Learn more about voltage drop click here: brainly.com/question/28164474
#SPJ11
A uniform solid sphere of radius r = 0.420 m and mass m = 15.5 kg turns clockwise about a vertical axis through its center (when viewed from above), at an angular speed of 2.80 rad/s. What is its vector angular momentum about this axis?
The vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
To calculate the vector angular momentum of a solid sphere rotating about a vertical axis through its center, we can use the formula:
L = I * ω
where:
L is the vector angular momentum,
I is the moment of inertia, and
ω is the angular speed.
Given:
Radius of the solid sphere (r) = 0.420 m,
Mass of the solid sphere (m) = 15.5 kg,
Angular speed (ω) = 2.80 rad/s.
The moment of inertia for a solid sphere rotating about an axis through its center is given by:
I = (2/5) * m * r^2
Substituting the given values:
I = (2/5) * 15.5 kg * (0.420 m)^2
Now we can calculate the vector angular momentum:
L = I * ω
Substituting the calculated value of I and the given value of ω:
L = [(2/5) * 15.5 kg * (0.420 m)^2] * 2.80 rad/s
Calculating this expression gives:
L ≈ 1.87 kg·m²/s
Therefore, the vector angular momentum of the solid sphere rotating about a vertical axis through its center is approximately 1.87 kg·m²/s.
Learn more about angular momentum from the given link
https://brainly.com/question/4126751
#SPJ11
Finnish saunas can reach temperatures as high as 130 - 140 degrees Celcius - which extreme sauna enthusiasts can tolerate in short bursts of 3 - 4 minutes. Calculate the heat required to convert a 0.8 kg block of ice, brought in from an outside temperature of -8 degrees Celcius, to steam at 104.0 degrees Celcius in the sauna. [The specific heat capacity of water vapour is 1.996 kJ/kg/K; see the lecture notes for the other specific heat capacities and specific latent heats].
To calculate heat required to convert a 0.8 kg block of ice to steam at 104.0 degrees Celsius in a sauna, we need to consider stages of phase change and specific heat capacities and specific latent heats involved.
First, we need to calculate the heat required to raise the temperature of the ice from -8 degrees Celsius to its melting point at 0 degrees Celsius. The specific heat capacity of ice is 2.09 kJ/kg/K. The equation for this heat transfer is:
Q1 = mass * specific heat capacity * temperature change
Q1 = 0.8 kg * 2.09 kJ/kg/K * (0 - (-8)) degrees Celsius. Next, we calculate the heat required to melt the ice at 0 degrees Celsius. The specific latent heat of fusion for ice is 334 kJ/kg. The equation for this heat transfer is:
Q2 = mass * specific latent heat
Q2 = 0.8 kg * 334 kJ/kg
After the ice has melted, we need to calculate the heat required to raise the temperature of the water from 0 degrees Celsius to 100 degrees Celsius. The specific heat capacity of water is 4.18 kJ/kg/K. The equation for this heat transfer is:
Q3 = mass * specific heat capacity * temperature change
Q3 = 0.8 kg * 4.18 kJ/kg/K * (100 - 0) degrees Celsius
Finally, we calculate the heat required to convert the water at 100 degrees Celsius to steam at 104.0 degrees Celsius. The specific latent heat of vaporization for water is 2260 kJ/kg. The equation for this heat transfer is:
Q4 = mass * specific latent heat
Q4 = 0.8 kg * 2260 kJ/kg
The total heat required is the sum of Q1, Q2, Q3, and Q4:
Total heat = Q1 + Q2 + Q3 + Q4
Calculating these values will give us the heat required to convert the ice block to steam in the sauna.
To learn more about specific latent heats click here : brainly.com/question/30460917
#SPJ11
A shopper standing 2.20 m from a convex security mirror sees his image with a magnification of 0.280. A shopper standing 2.20 m from a convex security mirror sees his image with a magnification of 0.280. (a) Where is his image (in m)? (Use the correct sign.) m behind the mirror (b) What is the focal length (in m) of the mirror? m (c) What is its radius of curvature in m)? m
The problem involves determining the position of an image formed by a convex security mirror, as well as the focal length and radius of curvature of the mirror.
(a) For a convex mirror, the magnification (m) is negative and given by the equation m = -di/do, where di is the image distance and do is the object distance. In this case, the magnification is 0.280 and the object distance is 2.20 m. Solving for di, we have:
0.280 = -di/2.20
Rearranging the equation, we find that di = -0.280 * 2.20 = -0.616 m. Since the image distance is negative, the image is formed behind the mirror, specifically, 0.616 m behind the mirror.
(b) The focal length (f) of a convex mirror can be determined using the formula 1/f = 1/do + 1/di. From part (a), we know that di = -0.616 m. Substituting this value and the object distance (do = 2.20 m) into the equation, we can solve for f:
1/f = 1/2.20 + 1/(-0.616)
Simplifying the equation, we find that 1/f = -0.4545 - 1.6234. Combining the terms on the right side gives 1/f = -2.0779. Taking the reciprocal of both sides, we get f = -0.481 m. Therefore, the focal length of the convex mirror is -0.481 m.
(c) The radius of curvature (R) of a convex mirror is twice the focal length, so R = 2 * (-0.481) = -0.962 m. The negative sign indicates that the radius of curvature is concave with respect to the observer.
Learn more about mirror:
https://brainly.com/question/3795433
#SPJ11
Transcribed image text: A rotating fan completes 1150 revolutions every minute. Consider the tip of the blade, at a radius of 120 cm. What is the linear distance moved when the tip moves through one revolution? What is the tip's speed and the magnitude of its acceleration? What is the period of the motion? Sebuah kipas yang berputar membuat 1150 putaran lengkap seminit. Pertimbangkan hujung bilah kipas, pada jejari 120 cm Berapakah jarak yang dibuat oleh hujung bilah kipas di dalam sutu putaran? Berapakah laju dan magnitud pecutan hujung bilah kipas? Berapakah tempoh gerakan? [16 marks / 16 markah] (a Light from a helium-neon laser (630 nm) is incident on a pair of slits. Interference pattern can be seen on a screen 2.0 m from the slits and the bright fringes are separated by 1.40 cm. What is the slit separation? A grating has 5000 lines per cm. Determine the angular separation between the central maximum and the second-order bright fringe if the wavelength of violet light is 410 nm. (b) (a) Cahaya dari helium-neon laser (630 nm) melalui sepasang celahan. Corak interferens dapat dilihat pada layar yang jauhnya 2.0 m dari celahan dan pinggir-pinggir terang dipisahkan sejauh 1.40 cm. Berapakah jarak pisahan antara celahan? Satu parutan mempunyai 5000 garisan per cm. Tentukan sudut pemisahan di antara pinggir terang pusat dengan pinggir terang tertib kedua jika panjang gelombang cahaya ungu ialah 410 nm. [16 marks / 16 markah] (b)
When the rotating fan completes one revolution, the tip of the blade moves a linear distance equal to the circumference of a circle with a radius of 120 cm. The tip's speed is the linear distance moved per unit of time, and its acceleration can be calculated using the formula for centripetal acceleration. The period of motion is the time taken for one complete revolution.
To find the linear distance moved by the tip of the blade in one revolution, we can use the formula for the circumference of a circle: C = 2πr, where r is the radius. Substituting the given radius of 120 cm, we have C = 2π(120 cm) = 240π cm.
The tip's speed is the linear distance moved per unit of time. Since the fan completes 1150 revolutions per minute, we can calculate the speed by multiplying the linear distance moved in one revolution by the number of revolutions per minute and converting to a consistent unit. Let's convert minutes to seconds by dividing by 60:
Speed = (240π cm/rev) * (1150 rev/min) * (1 min/60 s) = 4600π/3 cm/s.
To find the magnitude of the tip's acceleration, we can use the formula for centripetal acceleration: a = v²/r, where v is the speed and r is the radius. Substituting the given values, we have:
Acceleration = (4600π/3 cm/s)² / (120 cm) = 211200π²/9 cm/s².
The period of motion is the time taken for one complete revolution. Since the fan completes 1150 revolutions per minute, we can calculate the period by dividing the total time in minutes by the number of revolutions:
Period = (1 min)/(1150 rev/min) = 1/1150 min/rev.
In summary, when the fan completes one revolution, the tip of the blade moves a linear distance of 240π cm. The tip's speed is 4600π/3 cm/s, and the magnitude of its acceleration is 211200π²/9 cm/s². The period of motion is 1/1150 min/rev.
To know more about centripetal acceleration refer here:
https://brainly.com/question/32812920#
#SPJ11
"A child lets a ball fall off a balcony. After one second the
speed of the ball is 10m/s. What is the speed of the ball after 5
seconds?
After 5 seconds, the speed of the ball will be 49.2 m/s.
To determine the speed of the ball after 5 seconds, we need to consider the effect of gravity on its motion. Assuming no other forces act on the ball apart from gravity, we can use the laws of motion to calculate its speed.
When the child releases the ball, it starts falling under the influence of gravity. The acceleration due to gravity near the surface of the Earth is approximately 9.8 m/s², acting downward. The speed of the ball increases at a constant rate due to this acceleration.
After 1 second, the ball has reached a speed of 10 m/s. This means that it has been accelerating at a rate of 9.8 m/s² for that duration. We can use this information to calculate the change in velocity over the next 4 seconds.
Since the acceleration is constant, we can use the equation of motion:
v = u + at,
where:
v is the final velocity,
u is the initial velocity,
a is the acceleration,
t is the time taken.
Given that the initial velocity (u) is 10 m/s, the acceleration (a) is 9.8 m/s², and the time (t) is 4 seconds, we can substitute these values into the equation:
v = 10 + 9.8 × 4 = 10 + 39.2 = 49.2 m/s.
Therefore, after 5 seconds, the speed of the ball will be 49.2 m/s.
To learn more about speed
https://brainly.com/question/13943409
#SPJ11
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), what is the average temperature increase of the food, in degrees Celsius?
If the food has a total mass of 1.3 kg and an average specific heat capacity of 4 kJ/(kg·K), 1.25°C is the average temperature increase of the food, in degrees Celsius?
The equation for specific heat capacity is C = Q / (m T), where C is the substance's specific heat capacity, Q is the energy contributed, m is the substance's mass, and T is the temperature change.
The overall mass in this example is 1.3 kg, and the average specific heat capacity is 4 kJ/(kgK). We are searching for the food's typical temperature increase in degrees Celsius.
Let's assume that the food's original temperature is 20°C. The food's extra energy can be determined as follows:
Q = m × C × ΔT where Q is the extra energy, m is the substance's mass, C is its specific heat capacity, and T is the temperature change.
Q=1.3 kg*4 kJ/(kg*K)*T
Q = 5.2 ΔT kJ
Further, the temperature change can be calculated as follows:
ΔT = Q / (m × C)
T = 5.2 kJ / (1.3 kg x 4 kJ / (kg x K))
ΔT = 1.25 K
Hence, the food's average temperature increase is 1.25°C.
Learn more about Average Temperature at
brainly.com/question/28041542
#SPJ4
A spaceship, 230-m long for those on board, moves by the Earth at 0.955c. What is its length as measured by an earthbound observer
The length of the spaceship as measured by an earthbound observer is approximately 68.69 meters.
To calculate the length of the spaceship as measured by an earthbound observer, we can use the Lorentz transformation for length contraction:
L' = L × sqrt(1 - (v²/c²))
Where:
L' is the length of the spaceship as measured by the earthbound observer,
L is the proper length of the spaceship (230 m in this case),
v is the velocity of the spaceship relative to the earthbound observer (0.955c),
c is the speed of light.
Substituting the given values:
L' = 230 m × sqrt(1 - (0.955c)²/c²)
To simplify the calculation, we can rewrite (0.955c)² as (0.955)² × c²:
L' = 230 m × sqrt(1 - (0.955)² × c²/c²)
L' = 230 m × sqrt(1 - 0.911025)
L' = 230 m sqrt(0.088975)
L' = 230 m × 0.29828
L' = 68.69 m
Learn more about speed -
brainly.com/question/13943409
#SPJ11
In 2000, NASA placed a satellite in orbit around an asteroid. Consider a spherical asteroid with a mass of 1.20x1016 kg and a radius of 10.0 km. What is the speed of a satellite orbiting 4.60 km above the surface? What is the escape speed from the asteroid? Express your answer with the appropriate units.
The speed of a satellite orbiting 4.60 km above the surface of the asteroid is approximately 2.33 km/s, while the escape speed from the asteroid is about 4.71 km/s.
In order to calculate the speed of a satellite in orbit around the asteroid, we can use the formula for the orbital velocity of a satellite. This formula is derived from the balance between gravitational force and centripetal force:
V = sqrt(GM/r)
Where V is the velocity, G is the gravitational constant (approximately 6.674 × [tex]10^{-11}[/tex] [tex]m^3/kg/s^2[/tex]), M is the mass of the asteroid, and r is the distance from the center of the asteroid to the satellite.
Given that the mass of asteroid is 1.20 ×[tex]10^{16}[/tex] kg and the satellite is orbiting 4.60 km (or 4,600 meters) above the surface, we can calculate the orbital velocity as follows:
V = sqrt((6.674 × 10^-11[tex]m^3/kg/s^2[/tex]) * (1.20 × [tex]10^{16}[/tex]kg) / (10,000 meters + 4,600 meters))
Simplifying the equation, we find:
V ≈ 2.33 km/s
This is the speed of the satellite orbiting 4.60 km above the surface of the asteroid.
To calculate the escape speed from the asteroid, we can use a similar formula, but with the distance from the center of the asteroid to infinity:
V_escape = sqrt(2GM/r)
Using the same values for G and M, and considering the radius of the asteroid to be 10.0 km (or 10,000 meters), we can calculate the escape speed:
V_escape = sqrt((2 * 6.674 × [tex]10^{-11}[/tex] [tex]m^3/kg/s^2[/tex]) * (1.20 × [tex]10^{16}[/tex] kg) / (10,000 meters))
Simplifying the equation, we find:
V_escape ≈ 4.71 km/s
This is the escape speed from the asteroid.
Learn more about speed of satellite
brainly.com/question/13591338
#SPJ11
6. A golf cart of 330Kg of mass moves horizontally and without
friction at 5m/s when
a 70Kg person originally at rest gets on the golf cart. What will
be the final speed
of the cart with the person?
The final speed of the golf cart with the person will be 4.26 m/s
Mass of golf cart = 330 kgMass of person = 70 kgTotal mass of the system, m = 330 + 70 = 400 kgInitial velocity of the golf cart, u = 5 m/sFinal velocity of the golf cart with the person, v = ?,
As per the law of conservation of momentum: Initial momentum of the system, p1 = m × u = 400 × 5 = 2000 kg m/sNow, the person gets on the golf cart. Hence, the system now becomes of 400 + 70 = 470 kg of mass.Let the final velocity of the system be v'.Then, the final momentum of the system will be: p2 = m × v' = 470 × v' kg m/sNow, as per the law of conservation of momentum:p1 = p2⇒ 2000 = 470 × v'⇒ v' = 2000/470 m/s⇒ v' = 4.26 m/s.
Therefore, the final velocity of the golf cart with the person will be 4.26 m/s. (rounded off to 2 decimal places).Hence, the final speed of the golf cart with the person will be 4.26 m/s (approximately).
Learn more on momentum here:
brainly.com/question/24030570
#SPJ11
(a) A wire that is 1.50 m long at 20.0°C is found to increase in length by 1.90 cm when warmed t 420.0'C. Compute its average coefficient of linear expansion for this temperature range. (b) The wire i stretched just taut (zero tension) at 420.0*C. Find the stress in the wire if it is cooled to 20.0°C withou being allowed to contract. Young's modulus for the wire is 2.0 x 10^11 Pa.
(a) Thee average coefficient of linear expansion for this temperature range is approximately 3.17 x 10^(-5) / °C. (b) The stress in the wire, when cooled to 20.0°C without being allowed to contract, is approximately 2.54 x 10^3 Pa.
(a) The average coefficient of linear expansion (α) can be calculated using the formula:
α = (ΔL / L₀) / ΔT
Where ΔL is the change in length, L₀ is the initial length, and ΔT is the change in temperature.
Given that the initial length (L₀) is 1.50 m, the change in length (ΔL) is 1.90 cm (which is 0.019 m), and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
α = (0.019 m / 1.50 m) / 400.0°C
= 0.01267 / 400.0°C
= 3.17 x 10^(-5) / °C
(b) The stress (σ) in the wire can be calculated using the formula:
σ = E * α * ΔT
Where E is the Young's modulus, α is the coefficient of linear expansion, and ΔT is the change in temperature.
Given that the Young's modulus (E) is 2.0 x 10^11 Pa, the coefficient of linear expansion (α) is 3.17 x 10^(-5) / °C, and the change in temperature (ΔT) is 420.0°C - 20.0°C = 400.0°C, we can substitute these values into the formula:
σ = (2.0 x 10^11 Pa) * (3.17 x 10^(-5) / °C) * 400.0°C
= 2.0 x 10^11 Pa * 3.17 x 10^(-5) * 400.0
= 2.54 x 10^3 Pa.
To learn more about the linear expansion, click here: https://brainly.com/question/32547144
#SPJ11
A student measured the mass of a meter stick to be 150 gm. The student then placed a knife edge on 30-cm mark of the stick. If the student placed a 500-gm weight on 5-cm mark and a 300-gm weight on somewhere on the meter stick, the meter stick then was balanced. Where (cm mark) did the student place the 300- gram weight?
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
Given data:A student measured the mass of a meter stick to be 150 gm.
A knife edge was placed on 30-cm mark of the stick.
A 500-gm weight was placed on 5-cm mark and a 300-gm weight was placed somewhere on the meter stick. The meter stick was balanced.
Let's assume that the 300-gm weight is placed at x cm mark.
According to the principle of moments, the moment of the force clockwise about the fulcrum is equal to the moment of force anticlockwise about the fulcrum.
Now, the clockwise moment is given as:
M1 = 500g × 5cm
= 2500g cm
And, the anticlockwise moment is given as:
M2 = 300g × (x - 30) cm
= 300x - 9000 cm (Because the knife edge is placed on the 30-cm mark)
According to the principle of moments:
M1 = M2 ⇒ 2500g cm
= 300x - 9000 cm⇒ 2500
= 300x - 9000⇒ 300x
= 2500 + 9000⇒ 300x
= 11500⇒ x = 11500/300⇒ x
= 38.33 cm
Therefore, the student placed the 300-gram weight at 38.33 cm mark to balance the meter stick.
To know more about student visit;
brainly.com/question/28047438
#SPJ11
How much input force is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8?
An input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8.
The mechanical advantage of a simple machine is defined as the ratio of the output force to the input force. Therefore, to find the input force required to extract an output force of 500 N from a simple machine with a mechanical advantage of 8, we can use the formula:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
Rearranging the formula to solve for the input force, we get:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Substituting the given values, we have:
IF = 500 N / 8IF = 62.5 N
Therefore, an input force of 62.5 N is required to extract an output force of 500 N from a simple machine that has a mechanical advantage of 8. This means that the machine amplifies the input force by a factor of 8 to produce the output force.
This concept of mechanical advantage is important in understanding how simple machines work and how they can be used to make work easier.
To know more about input force, visit:
https://brainly.com/question/28919004
#SPJ11
To extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
Mechanical advantage is defined as the ratio of output force to input force.
The formula for mechanical advantage is:
Mechanical Advantage (MA) = Output Force (OF) / Input Force (IF)
In order to determine the input force required, we can rearrange the formula as follows:
Input Force (IF) = Output Force (OF) / Mechanical Advantage (MA)
Now let's plug in the given values:
Output Force (OF) = 500 N
Mechanical Advantage (MA) = 8
Input Force (IF) = 500 N / 8IF = 62.5 N
Therefore, extract an output force of 500 N from a simple machine that has a mechanical advantage of 8, the input force required is 62.5 N.
To know more about force, visit:
https://brainly.com/question/30526425
#SPJ11
15. You measure the specific heat capacity of a gas and obtain the following results: Cp = -1 (1.13±0.04) kJ kg-¹ K-¹, and Cy = (0.72 ± 0.03) kJ kg-¹ K-¹. State whether this gas is more likely to be monatomic or diatomic. State the confidence level of your answer by calculating the number of standard deviations. Q15: y = 1.57 ± 0.09 (most likely monatomic ~10, diatomic ruled out by ~1.90).
The specific heat capacity, Cp, of a monatomic gas is 3/2 R, where R is the molar gas constant (8.31 J K-¹ mol-¹). The specific heat capacity, Cp, of a diatomic gas is 5/2 R.
The specific heat capacity of a monatomic gas is less than the specific heat capacity of a diatomic gas. Therefore, the gas is more likely to be monatomic based on the values obtained.In order to calculate the number of standard deviations, the formula below is used:
\[\text{Number of standard deviations} = \frac{\text{observed value - mean value}}{\text{standard deviation}}\]Standard deviation, σ = uncertainty in the measurement (±) / 2 (as this is a random error)For Cp:-1 (1.13 ± 0.04) kJ kg-¹ K-¹ \[= -1.13\text{ kJ kg-¹ K-¹ } \pm 0.02\text{ kJ kg-¹ K-¹ }\].
To know more about calculate visit:
https://brainly.com/question/30781060
#SPJ11
1.Find the force on a particle of mass m=1.70×10-27kg and charge q=1.60×10-19C if it enters a field B=5 mT with an initial speed of v=83.5 km/s. Assume the velocity is in the x direction and the magnetic field enters perpendicular to the screen. Also make a schematic drawing of these vectors. Don't forget to place your reference system.
2.Find the force on a straight conductor of length 0.3 m, which carries a current of 5 A in the negative z-direction. In that space there is a magnetic field given by the vector B=3.5×10-3Ti-3.5×10-3Tj . Make a schematic drawing of the situation. (We do not require precision in your drawing for the direction of the magnetic field, only approximate).
3.A conductor of length 2.5 m is located at z=0, x=4m with a current of 12 A in the -y direction. Find the magnetic field that exists in that region if the force on the conductor is F=-1.20×10-2N(-12i-12j).
4.A long thin wire carries a current I. A metal bar of length L is moving with a constant speed v as shown in the figure. Point a is a distance d from the wire a) Calculate the electromotive force induced in the bar. b) If the bar is replaced by a rectangular circuit of resistance R, what is the magnitude of the induced current in the circuit?
1. The force on the particle is 1.36 x 10^-14 N, schematic drawing shows velocity in x-direction, magnetic field entering perpendicular to the screen, and force perpendicular to both.
2. The force on the straight conductor is 5.25 x 10^-3 N, schematic drawing shows conductor in negative z-direction and magnetic field vectors approximately orthogonal to the conductor.
3. The magnetic field is approximately -0.01 T in the x-direction and -0.01 T in the y-direction.
4. a) The electromotive force induced in the bar is BLv. b) The magnitude of the induced current in the rectangular circuit is V/R.
1. The force on the particle can be calculated using the equation F = qvB, where q is the charge, v is the velocity, and B is the magnetic field. Plugging in the given values, the force is 1.36 x 10^-14 N. A schematic drawing would show the velocity vector in the x-direction, the magnetic field vector entering perpendicular to the screen, and the force vector perpendicular to both.
2. The force on the straight conductor can be calculated using the equation F = IL x B, where I is the current, L is the length of the conductor, and B is the magnetic field. Plugging in the given values, the force is 5.25 x 10^-3 N. A schematic drawing would show the conductor in the negative z-direction, with the magnetic field vectors shown approximately orthogonal to the conductor.
3. The magnetic field can be determined using the equation F = IL x B. Since the force is given as F = -1.20 x 10^-2 N (-12i - 12j), we can equate the force components to the corresponding components of the equation and solve for B. The resulting magnetic field is approximately -0.01 T in the x-direction and -0.01 T in the y-direction.
4. To calculate the electromotive force induced in the bar, we can use the equation emf = BLv, where B is the magnetic field, L is the length of the bar, and v is the speed of the bar. The magnitude of the induced current in the rectangular circuit can be calculated using Ohm's Law, I = V/R, where V is the electromotive force and R is the resistance of the circuit.
Learn more about magnetic field:
https://brainly.com/question/14411049
#SPJ11
"The horizontal line that accommodates points C and F of a
mirror:
A. Is its principal axis,
B. It changes with distance from the object,
C. It is a beam of light,
D. Has other point
The answer to the question is that the horizontal line that accommodates points C and F of a mirror is its principal axis.
The explanation is given below:
Mirror A mirror is a smooth and polished surface that reflects light and forms an image. Depending on the type of surface, the reflection can be regular or diffuse.
The shape of the mirror also influences the reflection. Spherical mirrors are the most common type of mirrors used in optics.
Principal axis of mirror: A mirror has a geometric center called its pole (P). The perpendicular line that passes through the pole and intersects the mirror's center of curvature (C) is called the principal axis of the mirror.
For a spherical mirror, the principal axis passes through the center of curvature (C), the pole (P), and the vertex (V). This axis is also called the optical axis.
Principal focus: The principal focus (F) is a point on the principal axis where light rays parallel to the axis converge after reflecting off the mirror. For a concave mirror, the focus is in front of the mirror, and for a convex mirror, the focus is behind the mirror. The distance between the focus and the mirror is called the focal length (f).
For a spherical mirror, the distance between the pole and the focus is half of the radius of curvature (r/2).
The horizontal line that accommodates points C and F of a mirror is its principal axis.
To learn more about principal visit;
https://brainly.com/question/30026819
#SPJ11
1) What is the energy transformed in a 10.0 Ohm resistor when 100.0 V DC is applied for 5.00-minutes. 2) A 12.0 V DC supply is connected to two resistors in series. The first is 0.400 ks and the second is 0.800 kg. What is the current through and the potential difference across each resistor? 3) An 18.0 V source is connected to three resistors in parallel. These are 3.00 £2, 6.00 2 and 9.00 22 what are the currents through each resistor and the power converted in each resistor? Show that the sum of these currents is equal to the current through a single equivalent resistor of 1.64 22 (to 3 s.f.) connected to an 18.0 V source. What is the power converted in this resistor? 4) An AC current with amplitude 2.00 A flows through a 10 Ohm resistor. What is the average power transformed in the resistor?
The average power transformed in the 10 Ω resistor is 20 W.
1. The energy transformed in a 10.0 Ohm resistor when 100.0 V DC is applied for 5.00-minutes is 30,000 J.
2. The current through the first resistor is 30 A and the potential difference across it is 12 V.
The current through the second resistor is 15 A and the potential difference across it is 12 V.
3. The current through the 3.00 Ω resistor is 6 A, the current through the 6.00 Ω resistor is 3 A, and the current through the 9.00 Ω resistor is 2 A.
The power converted in the 3.00 Ω resistor is 108 W, the power converted in the 6.00 Ω resistor is 54 W, and the power converted in the 9.00 Ω resistor is 32 W.
The sum of these currents is 11 A, which is equal to the current through a single equivalent resistor of 1.64 Ω (to 3 s.f.) connected to an 18.0 V source.
The power converted in this resistor is 356 W.4.
The average power transformed in the 10 Ω resistor is 20 W.
To know more about average power visit:
https://brainly.com/question/17113976
#SPJ11
What is the wavelength of light in nm falling on double slits
separated by 2.20 µm if the third-order maximum is at an angle of
65.0°?
In the double-slit experiment, a coherent light source is shone through two parallel slits, resulting in an interference pattern on a screen. The interference pattern arises from the wave nature of light.
The term "wavelength" refers to the distance between two corresponding points on a wave, such as two adjacent peaks or troughs. In the context of the double-slit experiment, the "wavelength of light used" refers to the characteristic wavelength of the light source employed in the experiment.
To find the wavelength of light falling on double slits, we can use the formula for the path difference between the two slits:
d * sin(θ) = m * λ
Where:
d is the separation between the slits (2.20 µm = 2.20 × 10^(-6) m)
θ is the angle of the third-order maximum (65.0° = 65.0 × π/180 radians)
m is the order of the maximum (in this case, m = 3)
λ is the wavelength of light we want to find
We can rearrange the formula to solve for λ:
λ = (d * sin(θ)) / m
Plugging in the given values:
λ = (2.20 × 10⁻⁶ m) * sin(65.0 × π/180) / 3
Evaluating this expression gives us the wavelength of light falling on the double slits.
To know more about double slit experiment visit:
https://brainly.com/question/29381229
#SPJ11
Fill out the VIR chart for this electrical circuit
The current at point A = 3A, The current at B = 6 A, the current at C = 2.25 A, the current at D = 18 A.
What is the current flowing in the circuit?The current flowing in the circuit is calculated as follows;
Same current will be flowing at point A and C since they are in series, while different current will be flowing in the rest of the circuit.
Total resistance is calculated as;
1/R = 1/(3 + 9) + 1/6 + 1/2
1/R = 1/12 + 1/6 + 1/2
R = 1.33
The total current in the circuit;
I = V/R
I = 36 V / 1.33
I = 27 A
Current at B = 36 / 6 = 6 A
Current at D = 36 / 2 = 18 A
Current at A and C = 27 A - (6 + 18)A = 3 A
Current at A = 3 / 12 x 3 A = 0.75 A
current at C = 9 / 12 x 3A = 2.25 A
Learn more about current in circuit here: https://brainly.com/question/18108586
#SPJ1
An object is recognized even if its orientation changes pertains to what aspect of object perception? OA. Figure and ground B. Whole and part
C. Shape and orientation
The recognition of an object even when its orientation changes pertains to the aspect of object perception known as shape and orientation.
Perception is a cognitive process in which we interpret sensory information in the environment. Perception enables us to make sense of our world by identifying, organizing, and interpreting sensory information.
Perception involves multiple processes that work together to create an understanding of the environment. The first process in perception is sensation, which refers to the detection of sensory stimuli by the sensory receptors.
The second process is called attention, which involves focusing on certain stimuli and ignoring others. The third process is organization, in which we group and organize sensory information into meaningful patterns. Finally, perception involves interpretation, in which we assign meaning to the patterns of sensory information that we have organized and grouped.
Shape and orientation is an important aspect of object perception. It enables us to recognize objects regardless of their orientation. For example, we can recognize a chair whether it is upright or upside down. The ability to recognize an object regardless of its orientation is known as shape constancy.
This ability is important for our survival, as it enables us to recognize objects in different contexts. Thus, the recognition of an object even if its orientation changes pertains to the aspect of object perception known as shape and orientation.
Learn more about cognitive process at: https://brainly.com/question/7272441
#SPJ11
A light, rigid rod is 55.2 cm long. It's top end is privoted on a frictionless horizontal axie. The rod hangs straigh down at with an massive ball attached to its bottom end. You strike the ball, suddenly giving it a horizontal velocity so that it swings around on a full circle. What minimum speed at the bottom is required to make the ball go over the top of the circle?.
The minimum speed at the bottom required to make the ball go over the top of the circle is 32.91 cm/s.
When the ball is at the bottom of the circle, it has a certain amount of kinetic energy. This kinetic energy is converted into potential energy as the ball moves up the circle.
When the ball reaches the top of the circle, all of its kinetic energy has been converted into potential energy. The potential energy of the ball at the top of the circle is equal to its mass times the acceleration due to gravity times its height above the pivot point.
The ball will only be able to make it over the top of the circle if it has enough kinetic energy to overcome its potential energy. The minimum speed at the bottom of the circle required to do this is given by the following equation:
v_min = sqrt(2gh)
where:
v_min is the minimum speed at the bottom of the circle
g is the acceleration due to gravity (9.81 m/s^2)
h is the height of the ball above the pivot point (55.2 cm = 0.552 m)
Plugging in these values, we get:
v_min = sqrt(2 * 9.81 * 0.552) = 32.91 cm/s
Therefore, the minimum speed at the bottom required to make the ball go over the top of the circle is 32.91 cm/s.
To learn more about horizontal velocity click here: brainly.com/question/2114749
#SPJ11
A cockroach of mass m lies on the rim of a uniform disk of mass 7.00 m that can rotate freely about its center like a merry-go-round. Initially the cockroach and disk rotate together with an angular velocity of 0.200 rad. Then the cockroach walks halfway to the
center of the disk.
(a) What then is the angular velocity of the cockroach-disk system?
(b) What is the ratio K/Ko of the new kinetic energy of the system to its initial kinetic energy?
(a) The angular velocity of the cockroach-disk system after the cockroach walks halfway to the centre of the disk is 0.300 rad.
(b) The ratio K/Ko of the new kinetic energy of the system to its initial kinetic energy is 0.700.
When the cockroach walks halfway to the centre of the disk, it decreases its distance from the axis of rotation, effectively reducing the moment of inertia of the system. Since angular momentum is conserved in the absence of external torques, the reduction in moment of inertia leads to an increase in angular velocity. Using the principle of conservation of angular momentum, the final angular velocity can be calculated by considering the initial and final moments of inertia. In this case, the moment of inertia of the system decreases by a factor of 4, resulting in an increase in angular velocity to 0.300 rad.
The kinetic energy of a rotating object is given by the equation K = (1/2)Iω^2, where K is the kinetic energy, I is the moment of inertia, and ω is the angular velocity. Since the moment of inertia decreases by a factor of 4 and the angular velocity increases by a factor of 1.5, the ratio K/Ko of the new kinetic energy to the initial kinetic energy is (1/2)(1/4)(1.5^2) = 0.700. Therefore, the new kinetic energy is 70% of the initial kinetic energy.
To learn more about velocity, click here:
brainly.com/question/30559316
#SPJ11