Non-overlapping classes should be depicted.
If overlapping of classes is required, then it should be ensured that the limits of classes do not repeat.
Given frequency distribution is as follows;
Class Interval ( x ) : Frequency ( f )1-5 : 32-6 : 47-11 : 812-16 : 617-21 : 2
In the above frequency distribution, the wrong thing is the overlapping of classes. The 2nd class interval is 2 - 6, but the 3rd class interval is 7 - 11, which includes 6. This overlapping is not correct as it causes confusion. Two ways the classes could have been correctly depicted are:
Method 1: Non-overlapping classes should be depicted. The first class interval is 1 - 5, so the second class interval should start at 6 because 5 has already been included in the first interval. In this way, the overlapping of classes will not occur and each class will represent a specific range of data.
Method 2: If overlapping of classes is required, then it should be ensured that the limits of classes do not repeat. For instance, the 2nd class interval is 2 - 6, and the 3rd class interval should have been 6.1 - 10 instead of 7 - 11. In this way, the overlapping of classes will not confuse the reader, and each class will represent a specific range of data.
To know more about overlapping visit
https://brainly.com/question/31379321
#SPJ11
Pennsylvania Refining Company is studying the relationship between the pump price of gasoline and the number of gallons sold. For a sample of 17 stations last Tuesday, the correlation was 0.51, The company would like to test the hypothesis that the correlation between price and number of gallons sold is positive. a. State the decision rule for 0.025 significance level. (Round your answer to 3 decimal places.) b. Compute the value of the test statistic. (Round your answer to 3 decimal places.) The following sample observations were randomly selected. (Round intermediate calculations and final answers to 2 decimal places.) Click here for the Excel Data File
b. The value of the test statistic is approximately 1.9241.
a. The decision rule for a significance level of 0.025 can be stated as follows: If the absolute value of the test statistic is greater than the critical value obtained from the t-distribution with (n-2) degrees of freedom at a significance level of 0.025, then we reject the null hypothesis.
b. To compute the value of the test statistic, we can use the formula:
t = r * √((n-2) / (1 -[tex]r^2[/tex]))
Where:
r is the sample correlation coefficient (0.51)
n is the sample size (17)
Substituting the values into the formula:
t = 0.51 * √((17-2) / (1 - 0.51^2))
Calculating the value inside the square root:
√((17-2) / (1 - 0.51^2)) ≈ 3.7749
Substituting the square root value:
t = 0.51 * 3.7749 ≈ 1.9241
To know more about square root visit:
brainly.com/question/29286039
#SPJ11
3 of 25 After running a coiled tubing unit for 81 minutes, Tom has 9,153 feet of coiled tubing in the well. After running the unit another 10 minutes, he has 10,283 feet of tubing in the well. His call sheet shows he needs a total of 15,728 feet of tubing in the well. How many more feet of coiled tubing does he need to run into the well? feet 4 of 25 Brendan is running coiled tubing in the wellbore at a rate of 99.4 feet a minute. At the end of 8 minutes he has 795.2 feet of coiled tubing inside the wellbore. After 2 more minutes he has run an additional 198.8 feet into the wellbore. How many feet of coiled tubing did Brendan run in the wellbore altogether? 5 of 25 Coiled tubing is being run into a 22,000 foot wellbore at 69.9 feet per minute. It will take a little more than 5 hours to reach the bottom of the well. After the first four hours, how deep, in feet, is the coiled tubing? feet
3) The extra number of feet of coiled tubing Tom needs to run into the well is: 5445 ft
4) The total length of coiled tubing Brendan ran in the wellbore is: 994 ft
5) The distance that the coiled tubing has reached after the first four hours is: a depth of 16,776 feet in the well.
How to solve Algebra Word Problems?3) Initial amount of coiled tubing he had after 81 minutes = 9,153 feet
Amount of tubing after another 10 minutes = 10,283 feet
The total tubing required = 15,728 feet.
The extra number of feet of coiled tubing Tom needs to run into the well is: Needed tubing length - Current tubing length
15,728 feet - 10,283 feet = 5,445 feet
4) Speed at which Brendan is running coiled tubing = 99.4 feet per minute.
Coiled tubing inside the wellbore after 8 minutes is: 795.2 feet
Coiled tubing inside the wellbore after 2 more minutes is: 198.8 feet
The total length of coiled tubing Brendan ran in the wellbore is:
Total length = Initial length + Additional length
Total length = 795.2 feet + 198.8 feet
Total Length = 994 feet
5) Rate at which coiled tubing is being run into a 22,000-foot wellbore = 69.9 feet per minute. After the first four hours, we need to determine how deep the coiled tubing has reached.
A time of 4 hours is same as 240 minutes
Thus, the distance covered in the first four hours is:
Distance = Rate * Time
Distance = 69.9 feet/minute * 240 minutes
Distance = 16,776 feet
Read more about Algebra Word Problems at: https://brainly.com/question/21405634
#SPJ4
6. (i) Find the image of the triangle region in the z-plane bounded by the lines x=0, y=0 and x+y=1 under the transformation w=(1+2 i) z+(1+i) . (ii) Find the image of the region boun
i. We create a triangle in the w-plane by connecting these locations.
ii. We create a quadrilateral in the w-plane by connecting these locations.
(i) To find the image of the triangle region in the z-plane bounded by the lines x=0, y=0, and x+y=1 under the transformation w=(1+2i)z+(1+i), we can substitute the vertices of the triangle into the transformation equation and examine the resulting points in the w-plane.
Let's consider the vertices of the triangle:
Vertex 1: (0, 0)
Vertex 2: (1, 0)
Vertex 3: (0, 1)
For Vertex 1: z = 0
w = (1+2i)(0) + (1+i) = 1+i
For Vertex 2: z = 1
w = (1+2i)(1) + (1+i) = 2+3i
For Vertex 3: z = i
w = (1+2i)(i) + (1+i) = -1+3i
Now, let's plot these points in the w-plane:
Vertex 1: (1, 1)
Vertex 2: (2, 3)
Vertex 3: (-1, 3)
Connecting these points, we obtain a triangle in the w-plane.
(ii) To find the image of the region bounded by 1≤x≤2 and 1≤y≤2 under the transformation w=z², we can substitute the boundary points of the region into the transformation equation and examine the resulting points in the w-plane.
Let's consider the boundary points:
Point 1: (1, 1)
Point 2: (2, 1)
Point 3: (2, 2)
Point 4: (1, 2)
For Point 1: z = 1+1i
w = (1+1i)² = 1+2i-1 = 2i
For Point 2: z = 2+1i
w = (2+1i)² = 4+4i-1 = 3+4i
For Point 3: z = 2+2i
w = (2+2i)² = 4+8i-4 = 8i
For Point 4: z = 1+2i
w = (1+2i)² = 1+4i-4 = -3+4i
Now, let's plot these points in the w-plane:
Point 1: (0, 2)
Point 2: (3, 4)
Point 3: (0, 8)
Point 4: (-3, 4)
Connecting these points, we obtain a quadrilateral in the w-plane.
Learn more about triangle on:
https://brainly.com/question/11070154
#SPJ11
When the regression line is written in standard form (using z scores), the slope is signified by: 5 If the intercept for the regression line is negative, it indicates what about the correlation? 6 True or false: z scores must first be transformed into raw scores before we can compute a correlation coefficient. 7 If we had nominal data and our null hypothesis was that the sampled data came
5. When the regression line is written in standard form (using z scores), the slope is signified by the correlation coefficient between the variables. The slope represents the change in the dependent variable (in standard deviation units) for a one-unit change in the independent variable.
6. If the intercept for the regression line is negative, it does not indicate anything specific about the correlation between the variables. The intercept represents the predicted value of the dependent variable when the independent variable is zero.
7. False. Z scores do not need to be transformed into raw scores before computing a correlation coefficient. The correlation coefficient can be calculated directly using the z scores of the variables.
To know more about zero visit:
brainly.com/question/29120033
#SPJ11
Problem 5. Imagine it is the summer of 2004 and you have just started your first (sort-of) real job as a (part-time) reservations sales agent for Best Western Hotels & Resorts 1
. Your base weekly salary is $450, and you receive a commission of 3% on total sales exceeding $6000 per week. Let x denote your total sales (in dollars) for a particular week. (a) Define the function P by P(x)=0.03x. What does P(x) represent in this context? (b) Define the function Q by Q(x)=x−6000. What does Q(x) represent in this context? (c) Express (P∘Q)(x) explicitly in terms of x. (d) Express (Q∘P)(x) explicitly in terms of x. (e) Assume that you had a good week, i.e., that your total sales for the week exceeded $6000. Define functions S 1
and S 2
by the formulas S 1
(x)=450+(P∘Q)(x) and S 2
(x)=450+(Q∘P)(x), respectively. Which of these two functions correctly computes your total earnings for the week in question? Explain your answer. (Hint: If you are stuck, pick a value for x; plug this value into both S 1
and S 2
, and see which of the resulting outputs is consistent with your understanding of how your weekly salary is computed. Then try to make sense of this for general values of x.)
(a) function P(x) represents the commission you earn based on your total sales x.
(b) The function Q(x) represents the amount by which your total sales x exceeds $6000.
(c) The composition (P∘Q)(x) represents the commission earned after the amount by which total sales exceed $6000 has been determined.
(d) The composition (Q∘P)(x) represents the amount by which the commission is subtracted from the total sales.
(e) S1(x) = 450 + 0.03(x − 6000) correctly computes your total earnings for the week by considering both the base salary and the commission earned on sales exceeding $6000.
(a) In this context, the function P(x) represents the commission you earn based on your total sales x. It is calculated as 3% of the total sales amount.
(b) The function Q(x) represents the amount by which your total sales x exceeds $6000. It calculates the difference between the total sales and the threshold of $6000.
(c) The composition (P∘Q)(x) represents the commission earned after the amount by which total sales exceed $6000 has been determined. It can be expressed as (P∘Q)(x) = P(Q(x)) = P(x − 6000) = 0.03(x − 6000).
(d) The composition (Q∘P)(x) represents the amount by which the commission is subtracted from the total sales. It can be expressed as (Q∘P)(x) = Q(P(x)) = Q(0.03x) = 0.03x − 6000.
(e) The function S1(x) = 450 + (P∘Q)(x) correctly computes your total earnings for the week. It takes into account the base salary of $450 and adds the commission earned after subtracting $6000 from the total sales. This is consistent with the understanding that your total earnings include both the base salary and the commission.
Function S2(x) = 450 + (Q∘P)(x) does not correctly compute your total earnings for the week. It adds the commission first and then subtracts $6000 from the total sales, which would result in an incorrect calculation of earnings.
To learn more about functions: https://brainly.com/question/11624077
#SPJ11
Find the lines that are (a) tangent and (b) normal to the curve y=2x^(3) at the point (1,2).
The equations of the lines that are (a) tangent and (b) normal to the curve y = 2x³ at the point (1, 2) are:
y = 6x - 4 (tangent)y
= -1/6 x + 13/6 (normal)
Given, the curve y = 2x³.
Let's find the slope of the curve y = 2x³.
Using the Power Rule of differentiation,
dy/dx = 6x²
Now, let's find the slope of the tangent at point (1, 2) on the curve y = 2x³.
Substitute x = 1 in dy/dx
= 6x²
Therefore,
dy/dx at (1, 2) = 6(1)²
= 6
Hence, the slope of the tangent at (1, 2) is 6.The equation of the tangent line in point-slope form is y - y₁ = m(x - x₁).
Substituting the given values,
m = 6x₁
= 1y₁
= 2
Thus, the equation of the tangent line to the curve y = 2x³ at the point
(1, 2) is: y - 2 = 6(x - 1).
Simplifying, we get, y = 6x - 4.
To find the normal line, we need the slope.
As we know the tangent's slope is 6, the normal's slope is the negative reciprocal of 6.
Normal's slope = -1/6
Now we can use point-slope form to find the equation of the normal at
(1, 2).
y - y₁ = m(x - x₁)
Substituting the values of the point (1, 2) and
the slope -1/6,y - 2 = -1/6(x - 1)
Simplifying, we get,
y = -1/6 x + 13/6
Therefore, the equations of the lines that are (a) tangent and (b) normal to the curve y = 2x³ at the point (1, 2) are:
y = 6x - 4 (tangent)y
= -1/6 x + 13/6 (normal)
To know more about Power Rule, visit:
https://brainly.com/question/30226066
#SPJ11
Please
show work step by step for these problems. Thanks in advance!
From a survey of 100 college students, a marketing research company found that 55 students owned iPods, 35 owned cars, and 15 owned both cars and iPods. (a) How many students owned either a car or an
75 students owned either a car or an iPod, and 25 students did not own either a car or an iPod.
To determine the number of students who owned either a car or an iPod, we need to use the principle of inclusion and exclusion.
The formula to find the total number of students who owned either a car or an iPod is as follows:
Total = number of students who own a car + number of students who own an iPod - number of students who own both
By substituting the values given in the problem, we get:
Total = 35 + 55 - 15 = 75
Therefore, 75 students owned either a car or an iPod.
To find the number of students who did not own either a car or an iPod, we can subtract the total number of students from the total number of students surveyed.
Number of students who did not own either a car or an iPod = 100 - 75 = 25
Therefore, 25 students did not own either a car or an iPod.
In conclusion, 75 students owned either a car or an iPod, and 25 students did not own either a car or an iPod, according to the given data.
Know more about principle of inclusion and exclusion here:
https://brainly.com/question/32375490
#SPJ11
A machine cell uses 196 pounds of a certain material each day. Material is transported in vats that hold 26 pounds each. Cycle time for the vats is about 2.50 hours. The manager has assigned an inefficiency factor of 25 to the cell. The plant operates on an eight-hour day. How many vats will be used? (Round up your answer to the next whole number.)
The number of vats to be used is 8
Given: Weight of material used per day = 196 pounds
Weight of each vat = 26 pounds
Cycle time for each vat = 2.5 hours
Inefficiency factor assigned by manager = 25%
Time available for each day = 8 hours
To calculate the number of vats to be used, we need to calculate the time required to transport the total material by the available vats.
So, the number of vats required = Total material weight / Weight of each vat
To calculate the total material weight transported in 8 hours, we need to calculate the time required to transport the weight of one vat.
Total time to transport one vat = Cycle time for each vat / Inefficiency factor
Time to transport one vat = 2.5 / 1.25
(25% inefficiency = 1 - 0.25 = 0.75 efficiency factor)
Time to transport one vat = 2 hours
Total number of vats required = Total material weight / Weight of each vat
Total number of vats required = 196 / 26 = 7.54 (approximately)
Therefore, the number of vats to be used is 8 (rounded up to the next whole number).
Answer: 8 vats will be used.
To know more about vats visit:
https://brainly.com/question/20628016
#SPJ11
How do you write one third of a number?; What is the difference of 1 and 7?; What is the difference of 2 and 3?; What is the difference 3 and 5?
One third of a number: Multiply the number by 1/3 or divide the number by 3.
Difference between 1 and 7: 1 - 7 = -6.
Difference between 2 and 3: 2 - 3 = -1.
Difference between 3 and 5: 3 - 5 = -2.
To write one third of a number, you can multiply the number by 1/3 or divide the number by 3. For example, one third of 12 can be calculated as:
1/3 * 12 = 4
So, one third of 12 is 4.
The difference between 1 and 7 is calculated by subtracting 7 from 1:
1 - 7 = -6
Therefore, the difference between 1 and 7 is -6.
The difference between 2 and 3 is calculated by subtracting 3 from 2:
2 - 3 = -1
Therefore, the difference between 2 and 3 is -1.
The difference between 3 and 5 is calculated by subtracting 5 from 3:
3 - 5 = -2
Therefore, the difference between 3 and 5 is -2.
To know more about Multiply, refer here:
https://brainly.com/question/30875464
#SPJ4
Change the word phrase to an algebraic expression. Use x to represent the number. The product of 9 and two more than a number
The algebraic expression for "The product of 9 and two more than a number" is 9(x + 2).
In the given word phrase, "a number" is represented by the variable x. The phrase "two more than a number" can be translated as x + 2 since we add 2 to the number x. The phrase "the product of 9 and two more than a number" indicates that we need to multiply 9 by the value obtained from x + 2. Therefore, the algebraic expression for this word phrase is 9(x + 2).
"A number": This is represented by the variable x, which can take any value.
"Two more than a number": This means adding 2 to the number represented by x. So, we have x + 2.
"The product of 9 and two more than a number": This indicates that we need to multiply 9 by the value obtained from step 2, which is x + 2. Therefore, the algebraic expression becomes 9(x + 2).
In summary, the phrase "The product of 9 and two more than a number" can be algebraically expressed as 9(x + 2), where x represents the number.
Learn more about algebraic expression:
https://brainly.com/question/4344214
#SPJ11
i need help please
2. Majority Rules [15 points] Consider the ternary logical connective # where #PQR takes on the value that the majority of P, Q and R take on. That is #PQR is true if at least two of P,
#PQR = (P ∧ Q) ∨ (Q ∧ R) ∨ (R ∧ P) expresses the ternary logical connective #PQR using only P, Q, R, ∧, ¬, and parentheses.
To express the ternary logical connective #PQR using only the symbols P, Q, R, ∧ (conjunction), ¬ (negation), and parentheses, we can use the following expression:
#PQR = (P ∧ Q) ∨ (Q ∧ R) ∨ (R ∧ P)
This expression represents the logic of #PQR, where it evaluates to true if at least two of P, Q, or R are true, and false otherwise. It uses the conjunction operator (∧) to check the individual combinations and the disjunction operator (∨) to combine them together. The negation operator (¬) is not required in this expression.
The correct question should be :
Consider the ternary logical connective # where #PQR takes on the value that the majority of P,Q and R take on. That is #PQR is true if at least two of P,Q or R is true and is false otherwise. Express #PQR using only the symbols: P,Q,R,∧,¬, and parenthesis. You may not use ∨.
To learn more about ternary operators visit : https://brainly.com/question/23559673
#SPJ11
an experiment consists of choosing a colored urn with equally likely probability and then drawing a ball from that urn. in the brown urn, there are 24 brown balls and 11 white balls. in the yellow urn, there are 18 yellow balls and 8 white balls. in the white urn, there are 18 white balls and 16 blue balls. what is the probability of choosing the yellow urn and a white ball? a) exam image b) exam image c) exam image d) exam image e) exam image f) none of the above.
The probability of choosing the yellow urn and a white ball is 3/13.
To find the probability of choosing the yellow urn and a white ball, we need to consider the probability of two events occurring:
Choosing the yellow urn: The probability of choosing the yellow urn is 1/3 since there are three urns (brown, yellow, and white) and each urn is equally likely to be chosen.
Drawing a white ball from the yellow urn: The probability of drawing a white ball from the yellow urn is 18/(18+8) = 18/26 = 9/13, as there are 18 yellow balls and 8 white balls in the yellow urn.
To find the overall probability, we multiply the probabilities of the two events:
P(Yellow urn and white ball) = (1/3) × (9/13) = 9/39 = 3/13.
Therefore, the probability of choosing the yellow urn and a white ball is 3/13.
To know more about probability click here :
https://brainly.com/question/19538755
#SPJ4
Given that LMNO ≅ QRST, complete the statements.
Side LM is congruent to side
.
Angle MNO is congruent to angle
1.) Side LM is congruent to side QR
2.) Angle MNO is congruent to angle QRS.
Given that LMNO ≅ QRST, we can complete the statements as follows:
1.) Side LM is congruent to side QR.
Since the two triangles are congruent, their corresponding sides are also congruent. Therefore, side LM is congruent to side QR.
2.) Angle MNO is congruent to angle QRS.
When two triangles are congruent, their corresponding angles are also congruent. Thus, angle MNO is congruent to angle QRS.
Now, let's explore angle MNO in detail.
Angle MNO is an angle in triangle LMNO. Due to the congruence between LMNO and QRST, we can infer that angle QRS in triangle QRST is also congruent to angle MNO.
The congruence of angle MNO and angle QRS indicates that they have the same measure. Therefore, any property or characteristic applicable to angle MNO can also be applied to angle QRS.
For instance, if we know that angle MNO is a right angle, we can conclude that angle QRS is also a right angle. This is because congruent angles have equal measures, and if angle MNO has a measure of 90 degrees (which characterizes a right angle), angle QRS must also have a measure of 90 degrees.
In summary, the congruence between triangles LMNO and QRST implies that angle MNO and angle QRS are congruent, allowing us to apply the same properties and measurements to both angles.
For more question on congruent visit:
https://brainly.com/question/29789999
#SPJ8
Write the balanced net ionic equation for the reaction that occurs in the following case: {Cr}_{2}({SO}_{4})_{3}({aq})+({NH}_{4})_{2} {CO}_{
The balanced net ionic equation for the reaction between Cr₂(SO₄)3(aq) and (NH₄)2CO₃(aq) is Cr₂(SO₄)3(aq) + 3(NH4)2CO₃(aq) -> Cr₂(CO₃)3(s). This equation represents the chemical change where solid Cr₂(CO₃)3 is formed, and it omits the spectator ions (NH₄)+ and (SO₄)2-.
To write the balanced net ionic equation, we first need to write the complete balanced equation for the reaction, and then eliminate any spectator ions that do not participate in the overall reaction.
The balanced complete equation for the reaction between Cr₂(SO₄)₃(aq) and (NH₄)2CO₃(aq) is:
Cr₂(SO₄)₃(aq) + 3(NH₄)2CO₃(aq) -> Cr₂(CO₃)₃(s) + 3(NH₄)2SO₄(aq)
To write the net ionic equation, we need to eliminate the spectator ions, which are the ions that appear on both sides of the equation without undergoing any chemical change. In this case, the spectator ions are (NH₄)+ and (SO₄)₂-.
The net ionic equation for the reaction is:
Cr₂(SO₄)3(aq) + 3(NH₄)2CO₃(aq) -> Cr₂(CO₃)3(s)
In the net ionic equation, only the species directly involved in the chemical change are shown, which in this case is the formation of solid Cr₂(CO₃)₃.
To know more about net ionic equation refer here:
https://brainly.com/question/13887096#
#SPJ11
In Problems 9 and 10 determine whether the given first-order differential equation is linear in the indicated dependent variable by matching it with the first differential equation given in (7). 9. (y2−1)dx+xdy=0; in y; in x 10. udv+(v+uv−ueux)du=0; in v, in u
The equation in (7) that matches the first differential equation is equation 10: udv + (v + uv - ueux)du = 0; in v, in u.
To determine whether the given first-order differential equation is linear in the indicated dependent variable, we need to compare it with the general form of a linear differential equation.
The general form of a linear first-order differential equation in the dependent variable y is:
dy/dx + P(x)y = Q(x)
Let's analyze the given equations:
(y^2 - 1)dx + xdy = 0; in y; in x
Comparing this equation with the general form, we can see that it does not match. The presence of the term (y^2 - 1)dx makes it a nonlinear equation in the dependent variable y.
udv + (v + uv - ueux)du = 0; in v, in u
Comparing this equation with the general form, we can see that it matches. The equation can be rearranged as:
(v + uv - ueux)du + (-1)udv = 0
In this form, it is linear in the dependent variable v.
Therefore, the equation in (7) that matches the first differential equation is equation 10: udv + (v + uv - ueux)du = 0; in v, in u.
Learn more about differential equation here
https://brainly.com/question/32645495
#SPJ11
Prove:d2x К 1 dr² = ((d+ 2)² (d-2)²) dt2 m
(a) Classify this ODE and explain why there is little hope of solving it as is.
(b) In order to solve, let's assume
(c) We want to expand the right-hand side function in an appropriate Taylor series. What is the "appropriate" Taylor series? Let the variable that we are expanding in be called z. What quantity is playing the role of z? And are we expanding around z = 0 (Maclaurin series) or some other value of z? [HINT: factor a d² out of the denominator of both terms.] Also, how many terms in the series do we need to keep? [HINT: we are trying to simplify the ODE. How many terms in the series do you need in order to make the ODE look like an equation that you know how to solve?]
(d) Expand the right-hand side function of the ODE in the appropriate Taylor series you described in part (c). [You have two options here. One is the "direct" approach. The other is to use one series to obtain a different series via re-expanding, as you did in class for 2/3. Pick one and do it. If you feel up to the challenge, do it both ways and make sure they agree.]
(e) If all went well, your new, approximate ODE should resemble the simple harmonic oscillator equation. What is the frequency of oscillations of the solutions to that equation in terms of K, m, and d?
(f) Finally, comment on the convergence of the Taylor series you used above. Is it convergent? Why or why not? If it is, what is its radius of convergence? How is this related to the very first step where you factored d² out of the denominator? Could we have factored 2 out of the denominator instead? Explain.
a. The general solution differs from the usual form due to the non-standard roots of the characteristic equation.
b. To solve the ODE, we introduce a new variable and rewrite the equation.
c. The "appropriate" Taylor series is derived by expanding the function in terms of a specific variable.
d. Expanding the right-hand side function of the ODE using the appropriate Taylor series.
e. The new, approximate ODE resembles the equation for simple harmonic motion.
f. The convergence and radius of convergence of the Taylor series used.
(a) The ODE is a homogeneous second-order ODE with constant coefficients. We know that for such equations, the characteristic equation has roots of the form r = λ ± iμ, which gives the general solution c1e^(λt) cos(μt) + c2e^(λt) sin(μt). However, the characteristic equation of this ODE is (d² + 1/r²), which has roots of the form r = ±i/r. These roots are not of the form λ ± iμ, so the general solution is not the usual one. In fact, it involves hyperbolic trigonometric functions and is not easy to find.
(b) We let y = x'' so that we can rewrite the ODE as y' = -r²y + f(t), where f(t) = (d²/dr²)(1/r²)x(t). We will solve for y(t) and then integrate twice to get x(t).
(c) The "appropriate" Taylor series is f(z) = (1 + z²/2 + z⁴/24 + ...)d²/dr²(1/r²)x(t) evaluated at z = rt, which is playing the role of t. We are expanding around z = 0, since that is where the coefficient of d²/dr² is 1. We only need to keep the first two terms of the series, since we only need to simplify the ODE.
(d) We have f(z) = (1 + z²/2)d²/dr²(x(t)/r²) = (1 + z²/2)d²/dt²(x(t)/r²). Using the chain rule, we get d²/dt²(x(t)/r²) = [d²/dt²x(t)]/r² - 2(d/dt x(t))(d/dr)(1/r) + 2(d/dt x(t))(d/dr)(1/r)². Substituting this expression into the previous one gives y' = -r²y + (1 + rt²/2)d²/dt²(x(t)/r²).
(e) The new, approximate ODE is y' = -r²y + (1 + rt²/2)y. This is the equation for simple harmonic motion with frequency sqrt(2 + r²)/(2mr).
(f) The Taylor series is convergent since the function we are expanding is analytic everywhere. Its radius of convergence is infinite. We factored d² out of the denominator since that is the coefficient of x'' in the ODE. We could not have factored 2 out of the denominator since that would have changed the ODE and the subsequent calculations.
Learn more about Taylor series:
https://brainly.com/question/31140778
#SPJ11
In 20 words or fewer describe the kind of relationship you see between the x-coordinates of the midpoint and the endpoint not at the
The midpoint is half the x-coordinate at the endpoint that is not at the origin
How to determine the relationship between the midpointsfrom the question, we have the following parameters that can be used in our computation:
Midpoint and Endpoint
The midpoint of two endpoints is calculated as
Midpoint = 1/2 * Sum of endpoints
in this situation one of the endpoints is at the origin, and the other is a given value (x, 0)
Then, the midpoint is:
((x + 0)/2, 0) = (x/2, 0)
Hence, the relationship is: x(midpoint) = x/2
Read more about midpoint at
https://brainly.com/question/30587266
#SPJ1
Question 2 In a Markov chain model for the progression of a disease, X n
denotes the level of severity in year n, for n=0,1,2,3,…. The state space is {1,2,3,4} with the following interpretations: in state 1 the symptoms are under control, state 2 represents moderate symptoms, state 3 represents severe symptoms and state 4 represents a permanent disability. The transition matrix is: P= ⎝
⎛
4
1
0
0
0
2
1
4
1
0
0
0
2
1
2
1
0
4
1
4
1
2
1
1
⎠
⎞
(a) Classify the four states as transient or recurrent giving reasons. What does this tell you about the long-run fate of someone with this disease? (b) Calculate the 2-step transition matrix. (c) Determine (i) the probability that a patient whose symptoms are moderate will be permanently disabled two years later and (ii) the probability that a patient whose symptoms are under control will have severe symptoms one year later. (d) Calculate the probability that a patient whose symptoms are moderate will have severe symptoms four years later. A new treatment becomes available but only to permanently disabled patients, all of whom receive the treatment. This has a 75% success rate in which case a patient returns to the "symptoms under control" state and is subject to the same transition probabilities as before. A patient whose treatment is unsuccessful remains in state 4 receiving a further round of treatment the following year. (e) Write out the transition matrix for this new Markov chain and classify the states as transient or recurrent. (f) Calculate the stationary distribution of the new chain. (g) The annual cost of health care for each patient is 0 in state 1,$1000 in state 2, $2000 in state 3 and $8000 in state 4. Calculate the expected annual cost per patient when the system is in steady state.
A. This tells us that a patient with this disease will never fully recover and will likely experience relapses throughout their lifetime.
(b) To calculate the 2-step transition matrix, we can simply multiply the original transition matrix by itself: P^2
F. we get:
π = (0.2143, 0.1429, 0.2857, 0.3571)
G. The expected annual cost per patient when the system is in steady state is $3628.57.
(a) To classify the states as transient or recurrent, we need to check if each state is reachable from every other state. From the transition matrix, we see that all states are reachable from every other state, which means that all states are recurrent. This tells us that a patient with this disease will never fully recover and will likely experience relapses throughout their lifetime.
(b) To calculate the 2-step transition matrix, we can simply multiply the original transition matrix by itself: P^2 = ⎝
⎛
4/16 6/16 4/16 2/16
1/16 5/16 6/16 4/16
0 1/8 5/8 3/8
0 0 0 1
⎠
⎞
(c)
(i) To find the probability that a patient whose symptoms are moderate will be permanently disabled two years later, we can look at the (2,4) entry of the 2-step transition matrix: 6/16 = 0.375
(ii) To find the probability that a patient whose symptoms are under control will have severe symptoms one year later, we can look at the (1,3) entry of the original transition matrix: 0
(d) To calculate the probability that a patient whose symptoms are moderate will have severe symptoms four years later, we can look at the (2,3) entry of the 4-step transition matrix: 0.376953125
(e) The new transition matrix would look like this:
⎝
⎛
0.75 0 0 0.25
0 0.75 0.25 0
0 0.75 0.25 0
0 0 0 1
⎠
⎞
To classify the states as transient or recurrent, we need to check if each state is reachable from every other state. From the new transition matrix, we see that all states are still recurrent.
(f) To find the stationary distribution of the new chain, we can solve the equation Pπ = π, where P is the new transition matrix and π is the stationary distribution. Solving this equation, we get:
π = (0.2143, 0.1429, 0.2857, 0.3571)
(g) The expected annual cost per patient when the system is in steady state can be calculated as the sum of the product of the steady-state probability vector and the corresponding cost vector for each state:
0.2143(0) + 0.1429(1000) + 0.2857(2000) + 0.3571(8000) = $3628.57
Therefore, the expected annual cost per patient when the system is in steady state is $3628.57.
Learn more about matrix from
https://brainly.com/question/27929071
#SPJ11
water runs into a conical tank at the rate of 9ft(3)/(m)in. The tank stands point down and has a height of 10 feet and a base radius of 5ft. How fast is the water level rising when the water is bft de
The rate of change of the water level, dr/dt, is equal to (1/20)(b).
To determine how fast the water level is rising, we need to find the rate of change of the height of the water in the tank with respect to time.
Given:
Rate of water flow into the tank: 9 ft³/min
Height of the tank: 10 feet
Base radius of the tank: 5 feet
Rate of change of the depth of water: b ft/min (the rate we want to find)
Let's denote:
The height of the water in the tank as "h" (in feet)
The radius of the water surface as "r" (in feet)
We know that the volume of a cone is given by the formula: V = (1/3)πr²h
Differentiating both sides of this equation with respect to time (t), we get:
dV/dt = (1/3)π(2rh(dr/dt) + r²(dh/dt))
Since the tank is point down, the radius (r) and height (h) are related by similar triangles:
r/h = 5/10
Simplifying the equation, we have:
2r(dr/dt) = (r/h)(dh/dt)
Substituting the given values:
2(5)(dr/dt) = (5/10)(b)
Simplifying further:
10(dr/dt) = (1/2)(b)
dr/dt = (1/20)(b)
Therefore, the rate of change of the water level, dr/dt, is equal to (1/20)(b).
To learn more about rate of change
https://brainly.com/question/17214872
#SPJ11
A person must pay $ 6 to play a certain game at the casino. Each player has a probability of 0.16 of winning $ 12 , for a net gain of $ 6 (the net gain is the amount won 12 m
Given that a person must pay $ 6 to play a certain game at the casino. Each player has a probability of 0.16 of winning $ 12 , for a net gain of $ 6 (the net gain is the amount won 12 minus the amount paid 6 which is equal to $ 6). Let us find out the expected value of the game. The game's anticipated or expected value is $6.96.
The expected value of the game is the sum of the product of each outcome with its respective probability.The amount paid = $6The probability of winning $12 = 0.16
The net gain from winning $12 (12 - 6) = $6 The expected value of the game can be calculated as shown below:Expected value = ($6 x 0.84) + ($12 x 0.16)= $5.04 + $1.92= $6.96 Thus, the expected value of the game is $6.96.
To learn more about "Probability" visit: https://brainly.com/question/13604758
#SPJ11
a company that uses job order costing reports the following information for march. overhead is applied at the rate of 60% of direct materials cost. the company has no beginning work in process or finished goods inventories at march 1. jobs 1 and 3 are not finished by the end of march, and job 2 is finished but not sold by the end of march.
Based on the percentage completed and the cost of the jobs, total value of work in process inventory at the end of March is $62,480.
The work in process will include Jobs 1 and 3 only because job 2 is already done.
Work in process can be found as:
= Cost of job 1 + Cost of job 3
Cost of a single job is:
= Direct labor + Direct materials + Overhead which is 60% of direct materials
Solving for both jobs gives:
= (13,400 + 21,400 + (13,400 x 60%)) + (6,400 + 9,400 + (6,400 x 60%))
= $62,480
To learn more on Equation:
https://brainly.com/question/10413253
#SPJ4
CONSTRUCTION A rectangular deck i built around a quare pool. The pool ha ide length. The length of the deck i 5 unit longer than twice the ide length of the pool. The width of the deck i 3 unit longer than the ide length of the pool. What i the area of the deck in term of ? Write the expreion in tandard form
The area of the deck, in terms of the side length of the pool (s), is given by the expression 2s² + 11s + 15.
The length of the deck is 5 units longer than twice the side length of the pool.
So, the length of the deck can be expressed as (2s + 5).
The width of the deck is 3 units longer than the side length of the pool. Therefore, the width of the deck can be expressed as (s + 3).
The area of a rectangle is calculated by multiplying its length by its width. Thus, the area of the deck can be found by multiplying the length and width obtained from steps 1 and 2, respectively.
Area of the deck = Length × Width
= (2s + 5) × (s + 3)
= 2s² + 6s + 5s + 15
= 2s² + 11s + 15
Therefore, the area of the deck, in terms of the side length of the pool (s), is given by the expression 2s² + 11s + 15.
To learn more on Area click:
https://brainly.com/question/20693059
#SPJ4
Let U be a uniform random variable on (0,1). Let V=U −α
,α>0. a) Sketch a picture of the transformation V=U−α. Is the transformation monotone and one-to-one? b) Determine the CDF of V. Specify the possible values of v. c) Using the Inverse CDF Method give a formula that can be used to simulate values of V
The formula used to simulate values of V is given by v = u - α.
It is a horizontal transformation. As it shifts α units left, this transformation is not monotone or one-to-one since it takes values of U that are greater than α and assigns them to the same value of V.
The CDF of V can be calculated as follows:FV(v) = P(V ≤ v)FV(v) = P(U − α ≤ v)FV(v) = P(U ≤ v + α)FV(v) = ∫_0^(v+α) 1 duFV(v) = v + α, for 0 < v < 1 - α.
Hence, the possible values of v are 0 < v < 1 - α.c) Using the Inverse CDF Method, let U be a uniform random variable on (0, 1). To generate the simulated values of V, we take the transformation V = U - α. We know the CDF of V to be FV(v) = v + α, for 0 < v < 1 - α. We solve this equation for v to get:v = FV^(-1)(u) - αWe substitute the value of FV^(-1)(u) = u - α for v to get:v = u - α
Transformation GraphIt is a horizontal transformation. As it shifts α units left, this transformation is not monotone or one-to-one since it takes values of U that are greater than α and assigns them to the same value of V.The CDF of V can be calculated as follows:FV(v) = P(V ≤ v)FV(v) = P(U − α ≤ v)FV(v) = P(U ≤ v + α)FV(v) = ∫_0^(v+α) 1 duFV(v) = v + α, for 0 < v < 1 - α.
Hence, the possible values of v are 0 < v < 1 - α.
Using the Inverse CDF Method, let U be a uniform random variable on (0, 1). To generate the simulated values of V, we take the transformation V = U - α. We know the CDF of V to be FV(v) = v + α, for 0 < v < 1 - α. We solve this equation for v to get:v = FV^(-1)(u) - αWe substitute the value of FV^(-1)(u) = u - α for v to get:v = u - α.
Therefore, the formula used to simulate values of V is given by v = u - α.
To know more about Inverse CDF Method visit:
brainly.com/question/32227520
#SPJ11
Consider an inverted conical tank (point down) whose top has a radius of 3 feet and that is 2 feet deep. The tank is initially empty and then is filled at a constant rate of 0.75 cubic feet per minute. Let V = f(t) denote the volume of water (in cubic feet) at time t in minutes, and let h = g(t) denote the depth of the water (in feet) at time t. It turns out that the formula for the function g is g(t) = (t/π)1/3
a. In everyday language, describe how you expect the height function h = g(t) to behave as time increases.
b. For the height function h = g(t) = (t/π)1/3, compute AV(0,2), AV[2,4], and AV4,6). Include units on your results.
c. Again working with the height function, can you determine an interval [a, b] on which AV(a,b) = 2 feet per minute? If yes, state the interval; if not, explain why there is no such interval.
d. Now consider the volume function, V = f(t). Even though we don't have a formula for f, is it possible to determine the average rate of change of the volume function on the intervals [0,2], [2, 4], and [4, 6]? Why or why not?
a. As time increases, the height function h = g(t) is expected to increase gradually. Since the formula for g(t) is (t/π)^(1/3), it indicates that the depth of the water is directly proportional to the cube root of time. Therefore, as time increases, the cube root of time will also increase, resulting in a greater depth of water in the tank.
b. To compute the average value of V(t) on the given intervals, we need to find the change in volume divided by the change in time. The average value AV(a, b) is given by AV(a, b) = (V(b) - V(a))/(b - a).
AV(0,2):
V(0) = 0 (initially empty tank)
V(2) = 0.75 * 2 = 1.5 cubic feet (constant filling rate)
AV(0,2) = (1.5 - 0)/(2 - 0) = 0.75 cubic feet per minute
AV[2,4]:
V(2) = 1.5 cubic feet (end of previous interval)
V(4) = 0.75 * 4 = 3 cubic feet
AV[2,4] = (3 - 1.5)/(4 - 2) = 0.75 cubic feet per minute
AV[4,6]:
V(4) = 3 cubic feet (end of previous interval)
V(6) = 0.75 * 6 = 4.5 cubic feet
AV[4,6] = (4.5 - 3)/(6 - 4) = 0.75 cubic feet per minute
c. To determine an interval [a, b] on which AV(a,b) = 2 feet per minute, we need to find a range of time during which the volume increases by 2 cubic feet per minute. However, since the volume function is not explicitly given and we only have the height function, we cannot directly compute the average rate of change of volume. Therefore, we cannot determine an interval [a, b] where AV(a, b) = 2 feet per minute based solely on the height function.
d. Although we don't have a formula for the volume function f(t), we can still determine the average rate of change of volume on the intervals [0, 2], [2, 4], and [4, 6]. This can be done by calculating the change in volume divided by the change in time, similar to how we computed the average value for the height function. The average rate of change of volume represents the average filling rate of the tank over a specific time interval.
Learn more about average value click here: brainly.com/question/28123159
#SPJ11
Simplify each expression and state any restrictions on the variables. a) [a+3/a+2]-[(7/a-4)]
b) [4/x²+5x+6]+[3/x²+6x+9]
We can then simplify the expression as:`[4(x + 3) + 3(x + 2)] / (x + 2)(x + 3)²`Simplifying, we get:`[7x + 18] / (x + 2)(x + 3)²`The restrictions on the variable are `x ≠ -3` and `x ≠ -2`, since division by zero is not defined. Thus, the variable cannot take these values.
a) The given expression is: `[a+3/a+2]-[(7/a-4)]`To simplify this expression, let us first find the least common multiple (LCM) of the denominators `(a + 2)` and `(a - 4)`.The LCM of `(a + 2)` and `(a - 4)` is `(a + 2)(a - 4)`So, we multiply both numerator and denominator of the first fraction by `(a - 4)` and both numerator and denominator of the second fraction by `(a + 2)` to obtain the expression with the common denominator:
`[(a + 3)(a - 4) / (a + 2)(a - 4)] - [7(a + 2) / (a + 2)(a - 4)]`
Now, we can combine the fractions using the common denominator as:
`[a² - a - 29] / (a + 2)(a - 4)`
Thus, the simplified expression is
`[a² - a - 29] / (a + 2)(a - 4)`
The restrictions on the variable are `a
≠ -2` and `a
≠ 4`, since division by zero is not defined. Thus, the variable cannot take these values.b) The given expression is: `[4/x²+5x+6]+[3/x²+6x+9]`
To simplify this expression, let us first factor the denominators of both the fractions.
`x² + 5x + 6
= (x + 3)(x + 2)` and `x² + 6x + 9
= (x + 3)²`
Now, we can write the given expression as:
`[4/(x + 2)(x + 3)] + [3/(x + 3)²]`
Let us find the LCD of the two fractions, which is `(x + 2)(x + 3)²`.We can then simplify the expression as:
`[4(x + 3) + 3(x + 2)] / (x + 2)(x + 3)²`
Simplifying, we get:
`[7x + 18] / (x + 2)(x + 3)²`
The restrictions on the variable are `x
≠ -3` and `x
≠ -2`, since division by zero is not defined. Thus, the variable cannot take these values.
To know more about restrictions visit:
https://brainly.com/question/30195877
#SPJ11
A force of 20 lb is required to hold a spring stretched 3 ft. beyond its natural length. How much work is done in stretching the spring from 3 ft. beyond its natural length to 7 ft. beyond its natural length? Work
The work done in stretching the spring from 3 ft. beyond its natural length to 7 ft. beyond its natural length is 400/3 or 133.33 foot-pounds (rounded to two decimal places).
The work done in stretching the spring from 3 ft. beyond its natural length to 7 ft.
beyond its natural length can be calculated as follows:
Given that the force required to hold a spring stretched 3 ft. beyond its natural length = 20 lb
The work done to stretch a spring from its natural length to a length of x is given by
W = (1/2)k(x² - l₀²)
where l₀ is the natural length of the spring, x is the length to which the spring is stretched, and k is the spring constant.
First, let's find the spring constant k using the given information.
The spring constant k can be calculated as follows:
F = kx
F= k(3)
k = 20/3
The spring constant k is 20/3 lb/ft
Now, let's calculate the work done in stretching the spring from 3 ft. beyond its natural length to 7 ft. beyond its natural length.The work done to stretch the spring from 3 ft. to 7 ft. is given by:
W = (1/2)(20/3)(7² - 3²)
W = (1/2)(20/3)(40)
W = (400/3)
Know more about the natural length
https://brainly.com/question/15089989
#SPJ11
Latifa opens a savings account with AED 450. Each month, she deposits AED 125 into her account and does not withdraw any money from it. Write an equation in slope -intercept form of the total amount y
Therefore, the equation in slope-intercept form for the total amount, y, as a function of the number of months, x, is y = 125x + 450.
To write the equation in slope-intercept form, we need to express the total amount, y, as a function of the number of months, x. Given that Latifa opens her savings account with AED 450 and deposits AED 125 each month, the equation can be written as:
y = 125x + 450
In this equation: The coefficient of x, 125, represents the slope of the line. It indicates that the total amount increases by AED 125 for each month. The constant term, 450, represents the y-intercept. It represents the initial amount of AED 450 in the savings account.
To know more about equation,
https://brainly.com/question/29027288
#SPJ11
Find all horizontal and vertical asymptotes. f(x)= 5x^ 2−16x+3/x^ 2 −2x−3
The function [tex]f(x) = (5x^2 - 16x + 3) / (x^2 - 2x - 3)[/tex] has vertical asymptotes at x = 3 and x = -1. The horizontal asymptote of the function is y = 5.
To find the horizontal and vertical asymptotes of the function [tex]f(x) = (5x^2 - 16x + 3) / (x^2 - 2x - 3)[/tex], we examine the behavior of the function as x approaches positive or negative infinity.
Vertical Asymptotes:
Vertical asymptotes occur when the denominator of the function approaches zero, causing the function to approach infinity or negative infinity.
To find the vertical asymptotes, we set the denominator equal to zero and solve for x:
[tex]x^2 - 2x - 3 = 0[/tex]
Factoring the quadratic equation, we have:
(x - 3)(x + 1) = 0
Setting each factor equal to zero:
x - 3 = 0 --> x = 3
x + 1 = 0 --> x = -1
So, there are vertical asymptotes at x = 3 and x = -1.
Horizontal Asymptote:
To find the horizontal asymptote, we compare the degrees of the numerator and the denominator of the function.
The degree of the numerator is 2 (highest power of x) and the degree of the denominator is also 2.
When the degrees of the numerator and denominator are equal, we can determine the horizontal asymptote by looking at the ratio of the leading coefficients of the polynomial terms.
The leading coefficient of the numerator is 5, and the leading coefficient of the denominator is also 1.
Therefore, the horizontal asymptote is y = 5/1 = 5.
To summarize:
Vertical asymptotes: x = 3 and x = -1
Horizontal asymptote: y = 5
To know more about horizontal asymptote,
https://brainly.com/question/33399708
#SPJ11
public class BinarySearch \{ public static void main(Stringll args) f int [1]yl ist ={1,2,3,7,10,12,20}; int result = binarysearch ( inylist, 20); if (result =−1 ) System, out, println("Not found:"); else System.out.println("The index of the input key is " + result+ ". "): y public static int binarysearch(int]l List, int key) \{ int low =0; int high = iist. length −1 while (high >= low) \& int mid =( low + high )/2; if (key < List [mid] high = mid −1; else if (key =1 ist [ mid ] ) return inid; else low = mid +1; return −1; // Not found \} l TASK 4: Binary Search in descending order We have learned and practiced the implementation of the binary search approach that works on an array in ascending order. Now let's think about how to modify the above code to make it work on an array in descending order. Name your new binary search method as "binarysearch2". Implement your own code in Eclipse, and ensure it runs without errors. Submit your source code file (.java file) and your console output screenshot. Hint: In the ascending order case, our logic is as follows: int mid =( low + high )/2 if ( key < list [mid] ) else if (key = ist [mid]) return mid; In the descending order case; what should our logic be like? (Swap two lines in the above code.)
The task involves modifying the given code to implement binary search on an array in descending order. The logic of the code needs to be adjusted accordingly.
The task requires modifying the existing code to perform binary search on an array sorted in descending order. In the original code, the logic for the ascending order was based on comparing the key with the middle element of the list. However, in the descending order case, we need to adjust the logic.
To implement binary search on a descending array, we need to swap the order of the conditions in the code. Instead of checking if the key is less than the middle element, we need to check if the key is greater than the middle element. Similarly, the condition for equality also needs to be adjusted.
The modified code for binary search in descending order would look like this:
public static int binarysearch2(int[] list, int key) {
int low = 0;
int high = list.length - 1;
while (high >= low) {
int mid = (low + high) / 2;
if (key > list[mid])
high = mid - 1;
else if (key < list[mid])
low = mid + 1;
else
return mid;
}
return -1; // Not found
}
By swapping the conditions, we ensure that the algorithm correctly searches for the key in a descending ordered array.
For more information on array visit: brainly.com/question/30891254
#SPJ11
Graph the quadratic function of y=-4x^2-4x-1y=−4x 2 −4x−1
The graph of the quadratic function y = -4x^2 - 4x - 1 is a downward-opening parabola. To graph the quadratic function, we can analyze its key features, such as the vertex, axis of symmetry, and the direction of the parabola.
Vertex: The vertex of a quadratic function in the form y = ax^2 + bx + c is given by the coordinates (-b/2a, f(-b/2a)). In this case, a = -4 and b = -4. So, the x-coordinate of the vertex is -(-4)/(2(-4)) = 1/2. Substituting this x-value into the equation, we can find the y-coordinate:
f(1/2) = -4(1/2)^2 - 4(1/2) - 1 = -4(1/4) - 2 - 1 = -1.
Therefore, the vertex is (1/2, -1).
Axis of symmetry: The axis of symmetry is a vertical line passing through the vertex. In this case, the axis of symmetry is x = 1/2.
Direction of the parabola: Since the coefficient of the x^2 term is -4 (negative), the parabola opens downward.
With this information, we can plot the graph of the quadratic function.
The graph of the quadratic function y = -4x^2 - 4x - 1 is a downward-opening parabola. The vertex is located at (1/2, -1), and the axis of symmetry is the vertical line x = 1/2.
To know more about parabola , visit;
https://brainly.com/question/11911877
#SPJ11