Answer:
0.144 M
Explanation:
First we convert 0.307 g of KHP (potassium hydrogen phthalate, KHC₈H₄O₄) into moles, using its molar mass:
0.307 g ÷ 204.22 g/mol = 0.0015 mol KHP1 mol of KHP reacts with 1 mol of NaOH, that means that in 10.40 mL of the NaOH solution there were 0.0015 moles of NaOH.
Now we calculate the molarity of the NaOH solution:
10.40 mL / 1000 = 0.0104 LMolarity = 0.0015 mol / 0.0104 L = 0.144 Mwhy did researchers at the university of Antwerp study high speed videos of the black woodpecker
here's your answer..
What do all fossil fuels have in common?
O A. They are all liquids.
OB. They all contain crude oil.
O C. They all produce nitrogen as a combustion product.
O D. They are all nonrenewable energy sources.
Answer:
Your answer would be D, they are all non-renewable energy sources. Hope this helps!
Answer:
D. They are all nonrenewable energy sources.
light energy travels in
Light energy travels in the form of waves.
Explain why the coefficients on the left side of the equation don’t necessarily equal the coefficients on the right side of the equation. Is this possible if mass is being conserved?
Answer:
Explanation:
Short answer: Yes.
The coefficients may not be conserved, but mass always has to be. Take this equation as an example
2 Mg3P2 ===> 6Mg + P4
There is a 2 on the left side and 6 and 1 on the right. I hope you mean that the coefficient 2 is not equal to 7.
But let's look a little closer. You have to look at the molecular structure of the left and right side.
2Mg3P2 has 6 Mgs and 4 Ps on the left side.
6Mg is on the right. They are free standing.
P4 has 1 molecule consisting of 4 Ps.
Everything balances.
This is a terrific question to be asking. You need to understand the internal balance numbers vs the molecular ones on the out side.
That sounds like a bit of gobbledygook and it takes a bit of study.
2 Mg3P2 means that Mg3P2 is written twice.
Mg3P2 ==> "3 Mg2+ + 2P3+ and there is another one written the same way.
Mg3P2 ==> "3 Mg2+ + 2P3+
How many atoms in total are there in 7.35 mol of magnesium oxide (MgO)
molecules?
Answer:
4.42 x 10^24
Explanation:
In Atom, what is a heavier sub-atomic particle than the others and explain why
The nucleons are havier in sub atomic particle like neutrons and protons.
fun fact i read in a book even 1cm³ of nucleons are around 2 million Kg which you can't pick up by hand even by machines like buldozer.
When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that ________
Answer:
When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that acetic acid is being converted to sodium acetate.
Explanation:
ABOUT TITRATION - Titration is a chemical analysis method for determining the amount of a constituent in a sample by adding an exact known quantity of another substance to the measured sample with which the desired constituent reacts in a specific, known proportion. A burette, which is essentially a long, graduated measuring tube with a stopcock and a delivery tube at the bottom end, is used to gradually administer a standard solution of titrating reagent, or titrant.
It is feasible to identify a good visual color indicator for many titration processes that will signify the end point at, or very near to, the equivalence point.
Acid-base titrations, precipitation titrations, complex-formation titrations, and oxidation-reduction (redox) titrations are examples of such titrations, which are categorised according to the nature of the chemical reaction that occurs between the sample and the titrant.
Titrations of metal ions with the reagent disodium ethylenediaminetetraacetate are the most important titrations based on complex-formation processes (a salt of edetic acid, or EDTA).
Hence , the answer is that acetic acid is converted into sodium acetate.
how do the hydrosphere and atmosphere interact? give an example
Answer:
Evaporation
Explanation:
Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere
Name the substance which occurs in all the physical states in nature?
Answer: water
For many centuries, it was considered that there were only three states of matter: solid, liquid and gas (the three that are present and stable in our world). And water is the substance that best represents them, because it is the only one that exists naturally in the three states.
Explanation: Matter can exist in one of three main states: solid, liquid, or gas.
Solid matter is composed of tightly packed particles. ...
Liquid matter is made of more loosely packed particles. ...
Gaseous matter is composed of particles packed so loosely that it has neither a defined shape nor a defined volume.
Answer:
Water is the only common substance that is naturally found as a solid, liquid or gas. Solids, liquids and gases are known as states of matter.
Feel free to mark it as brainliest :D
Ignore this part unless you want to understand out of your syllabus:
However, if you take into account the fifth state of matter, Bose-Einstein Condensate, which has been recently discovered, there is no substance as such.
The area of a telescope lens is 6507 x 10^3 mm^2. What is the area in square feet, enter your answer in scientific notation. If it takes a technician 51.6 s to polish 1.68 x 10^2 mm^2 how long does it take her to polish the entire lens ?
Answer: the area of the telescope lens is \textit{0,08507 ft}
Explanation: Happy I could help!
Brainiest and 10 Points
Which has a HIGHER frequency?
A. Visible
B. Ultraviolet
Answer:
B. Ultraviolet
Explanation:
UV has a higher frequency and shorter wavelength than visible light
Question 1
Where does photosynthesis happen in a plant cell?
O Cell membrane
O Cell wall
O Chloroplast
O Mitochondria
Answer:
Chloroplast
Explanation:
Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.
HELP! ASAP! Iron (Fe) and copper (II) chloride (CuCl2) combine to form iron (III) chloride (FeCl3) and copper (Cu). If you start with 155,8 grams of
iron (Fe), how many grams of copper (Cu) will be produced?
2Fe + 3CuCl2 à 2FeCl3 + 3Cu
Answer: 30.978
Explanation:
From the equation 2 moles of Fe will result in 3 moles copper
so .325 moles Fe will result in .4875 moles Cu
Cu weights 63.546 gm per mole
.4875 moles * 63.546 gm / mole = 30.978 gm of Cu
List five general properties of organic
Compound
Answer:
Five general properties of organic compounds:
Organic compounds include complex structures and high molecular weights.Organic compounds have low melting points and boiling points. They are volatile in nature. They are generally insoluble in water but soluble in organic solvents. They are poor bad conductors of electricity.Calculate the density of a solid substance if a cube measuring 2.54 cm on one side has a mass of 108 g/cm3
Answer:
6.59 g/cm³
Explanation:
Step 1: Given data
Side of the cube (s): 2.54 cmMass of the cube (m): 108 gStep 2: Calculate the volume of the cube
We will use the following expression.
V = s³ = (2.54 cm)³ = 16.4 cm³
Step 3: Calculate the density of the solid
Density is an intrinsic property, equal to the quotient between the mass and the volume.
ρ = m/V
ρ = 108 g / 16.4 cm³ = 6.59 g/cm³
a. acidic
b. basic
; neutral
d. will not be affected
Find the molarity of 10% NaOH.[MOE 2003
a. 1.5
b! 2.5
c. 4
d. 0.4
10 ml of 2.5 N NaOH is mixed with 20 ml of
N HCI. The mixture is diluted to 100 ml. WI
is the nature of mixture?
IMOF 20
1. You didn't post the question to Number 1.
2.
10% means There's 10g in 100ml of this solution.
This is the weight/volume(w/v) expression of concentration.
So
We have Mass =10g
volume =100ml
Molarity = Moles of solute/volume of solution(in LITRES)
Moles=Mass/Molar mass
Molar mass of NaOH=40g/mol
Mole=10/40
=0.25mole
Volume =100ml =0.1Litres
MOLARITY=0.25/0.1 =
=2.5M
OPTION B.
3. NOTE: THE MOLARITY AND NORMALITY OF NAOH AND HCL ARE THE SAME(This doesn't happen for all compounds tho)
So We can take 2.5N(Normality) of NaOH to be 2.5M(Molarity) NaOH
I think you forgot to write the Normality of the second one. I'll take it to be 1N. Maybe you can then Input supposed value when you're solving on your own
So
1N HCl is same as 1M HCL
We were given their respective volumes
2.5M NaOH can also be written as 2.5mole/volume(in Liters)
The volume of NaOH =10ml or 0.01L
Moles = 2.5mole/L x 0.01L
You notice that Liters on top and bottom cancels out... leaving the moles
So
Mole=0.01x2.5 = 0.025moles of NaOH
we're gonna do the same for 1N HCl in 20ml(0.02L)
So
Mole = 1 x 0.02 =0.02moles
Total Mole = 0.02 + 0.025 =0.045moles
The Final Volume is 100ml as stated in the question. It was diluted to 100ml or 0.1L
So
Final Concentration In Molarity
= Total Moles/Volume in L
=0.045/0.1
=0.45M.
Identify the true statement(s). There may be one answer or more than one answer.FADH2 is a reducing agent. FADH2 is an oxidizing agent. NADH is an oxidizing agent. NADPH is a reducing agent. FAD is an oxidizing agent.
Answer:
FADH2 is a reducing agent.
FAD is an oxidizing agent.
Explanation:
The full form of FAD is flavin adenine dinucleotide. It is mainly a redox-active coenzyme which is associated with the different proteins and is involved with the enzymatic reactions in the metabolism.
FAD is obtained by donating or accepting electrons.
In the citric acid cycle,
succinate + FAD → fumarate + [tex]$FADH_2$[/tex]
Thus we see that FAD is an oxidizing agent while [tex]$FADH_2$[/tex] is a reducing agent.
Which or the following will most likely happen if the pancreas does not produce sufficient insulin?
Answer:
C. Blood sugar increases b/c insulin lowers blood sugar when it rises too high
Explanation:
Insulin is highly needed by body to regular sugar levels (primarily to lower it when sugar levels rise up). I remember it like this "in" sulin means this hormones "pushes" the sugar inside the cells so that sugar level in the blood comes back to normal.
Therefore, if there is not enough insulin produced by pancreas, blood sugars will rise which can be fatal. That's why some diabetic patients take insulin shots to regulate their blood glucose levels.