The distance required to brake to a panic stop is given by the equation: d = v^2 / 2a
Where d is the distance, v is the initial velocity, and a is the acceleration. For the first situation, we have: v = 9.0 m/s, a = -9.0 m/s^2 (assuming a constant acceleration), d = v^2 / 2a = 9.0^2 / 2(-9.0) = 4.5 m. For the second situation, we have: v = 29 m/s, a = -9.0 m/s^2, d = v^2 / 2a = 29^2 / 2(-9.0) = 45.5 m. Therefore, the distance required to brake to a panic stop from a speed of 29 m/s is 45.5 meters.
To learn more about distance click the link below
brainly.com/question/15256256
#SPJ4
Explain practical applications of good and bad conductors
Good conductors and bad conductors, also known as insulators, have different properties that make them suitable for various practical applications.
A conductor is a material that allows the flow of electric current, while an insulator (or bad conductor) is a material that resists the flow of electric current.
Good conductors are materials that allow the flow of electric current with low resistance. They are characterized by having a high density of free electrons that can move through the material easily when a voltage is applied. Metals, especially copper, silver, and gold, are good conductors of electricity because they have a large number of free electrons in their outermost atomic shells. Other materials such as aluminum, iron, and graphite are also good conductors, although they may not be as efficient as metals.
Good conductors have a wide range of practical applications in various industries, including electrical wiring, electronics, and energy generation. They are used in everything from electrical cables to electronic devices like smartphones and computers, where their low resistance allows for efficient energy transfer and signal transmission.
To learn more about Good Conductor visit here:
brainly.com/question/12370218
#SPJ4
a pickup truck is moving at 25 m/s with a toolbox of mass m resting on the bed of the truck 3.5 m behind the cab. suddenly the brakes are applied, causing the toolbox to slide, and the truck comes to a stop in 6.0 s. the coefficient of kinetic friction between the toolbox and the bed of the truck is 0.3. after the brakes are applied, how much time elapses before the toolbox strikes the cab
After the brakes are applied it takes 8.47s time elapses before the toolbox strikes the cab.
The pickup truck is moving at 25 m/s with the toolbox of mass m resting on the bed of the truck 3.5 m behind the cab and the coefficient of kinetic friction between the toolbox and the bed of the truck is 0.3.
By using the equation a = (μk * g) / m
where a is the acceleration,
μk is the coefficient of kinetic friction,
g is the acceleration due to gravity (9.8 m/s2), and m is the mass of the toolbox.
By substituting the given values, we find the acceleration of the toolbox to be
a = (0.3 * 9.8) / m = 2.94 m/s2.
Since the toolbox is initially at rest, the velocity at which it strikes the cab is equal to the final velocity of the truck, 25 m/s. To find the time it takes for the toolbox to reach the cab, we can use the equation
t = vf / a where t is the time, vf is the final velocity, and a is the acceleration found above.
By substituting the given values, we find the time it takes for the toolbox to reach the cab to be
t = 25 / 2.94 = 8.47 seconds.
Therefore, the time it takes for the toolbox to strike the cab after the brakes are applied is 8.47 seconds.
To know more about Time refer here :
https://brainly.com/question/1816510
#SPJ11
In 1912, Alfred Wegener proposed his continental drift theory and was widely rejected. Imagine if you had to assist Wegener in proving that we live on huge plates that are constantly in motion. Luckily, you also have provided resources such as videos and articles to compile your evidence and help Wegener. Present your research using an interactive PowerPoint or Storyboard while answering the below questions.
1. What does the theory of plate tectonics state?
2. What was Pangaea?
3. Why was Wegener's original idea about continental drift referred to as intuition and not science?
4. What did Wegener find that he believed was evidence to support his theory?
Evidence for plate tectonics
Research the evidence that scientists used to prove the theory that continents move.
Research rock formation evidence and give examples.
Research fossils evidence
o Research fossil evidence of the following organisms: Glossopteris, Mesosaurus, Cynognathus and Lystrosaurus. Summarize the type of organisms, their habitat and climate conditions.
5. Research evidence from glaciers and coal deposits.
Answer:
1. The theory of plate tectonics states that the Earth's outer shell is divided into several plates that move and interact with each other. These plates are made up of the Earth's crust and the upper part of the mantle, and they move due to the convection currents in the mantle.
2. Pangaea was a supercontinent that existed about 300 million years ago. It was made up of all the continents that we know today, and it began to break apart about 200 million years ago.
3. Wegener's original idea about continental drift was referred to as intuition and not science because he did not have a mechanism to explain how the continents moved. Additionally, he did not have enough evidence to support his theory.
4. Wegener found several pieces of evidence that he believed supported his theory of continental drift. He noticed that the coastlines of South America and Africa fit together like puzzle pieces, and he also found similar rock formations and fossils on both continents.
Evidence for plate tectonics:
Rock formation evidence: Scientists have found similar rock formations on different continents that were once connected. For example, the Appalachian Mountains in North America and the Caledonian Mountains in Europe have similar rock formations.
Fossil evidence: Scientists have found fossils of the same species on different continents that were once connected. For example, the Glossopteris plant was found in South America, Africa, India, Australia, and Antarctica. This suggests that these continents were once connected and had similar climates.
Glossopteris: Glossopteris was a plant that lived about 250 million years ago. It was found on several continents that were once connected, including South America, Africa, India, Australia, and Antarctica. This suggests that these continents were once connected and had similar climates.
Mesosaurus: Mesosaurus was a freshwater reptile that lived about 300 million years ago. Its fossils have been found in South America and Africa, which suggests that these continents were once connected and had similar habitats.
Cynognathus: Cynognathus was a carnivorous mammal-like reptile that lived about 250 million years ago. Its fossils have been found in South America, Africa, and Antarctica, which suggests that these continents were once connected and had similar habitats.
Lystrosaurus: Lystrosaurus was a herbivorous mammal-like reptile that lived about 250 million years ago. Its fossils have been found in South America, Africa, India, and Antarctica, which suggests that these continents were once connected and had similar habitats.
Glacier and coal deposit evidence: Scientists have found evidence of glaciers and coal deposits in areas that are now near the equator. This suggests that these areas were once located near the poles and have moved due to plate tectonics. Additionally, coal deposits found in Antarctica suggest that it was once located in a warmer climate.
PLEASE EXPLAIN WHAT THIS MEANS I NEED HELP UNDERSTANDING!!
Develop an investigation to provide evidence of positive entropy within a nearly
closed system. Start with the materials you used in the insulation test activity,
adding to them as needed and applying what you have learned to plan a system
that is as closed as possible. Decide how you will measure thermal energy in
each of two components of the system, how you will determine their change in
energy, and how you will calculate entropy. Write a step-by-step procedure, and
then conduct your investigation.
After you conduct your investigation, write an analysis of your findings. Include
answers to the following questions in your analysis.
Entropy changes that are positive (+) indicate more chaos. The entropy of the universe is increasing. The entropy of a universe increases whenever there is any spontaneous change.
What constitutes a positive example of entropy?As the ice melts, the molecules grow disorganised as they are now able to move about. The water is then heated to transform into a gas, releasing the molecules to move freely through space. Both of the above reactions would have a positive entropy (DS).
What are some examples of positive or negative entropy?Positive entropy indicates an increase in randomness in a system. Positive entropy processes include boiling and evaporation. A system has less randomness when the entropy is negative. A few instances of negative entropy processes include freezing and condensation.
To know more about universe visit:
https://brainly.com/question/11987268
#SPJ1
4. QUESTIONS
The tapered springs obey Hooke's over the widest range of loads when suspended with the large
diameter end down. This is why they are made that way. Explain why this works.
Tapered springs are designed to be load-bearing structures that can store and release mechanical energy in response to applied forces or loads.
When a tapered spring is suspended with the large diameter end down, it experiences a compressive force due to gravity.
Mechanical energy refers to the energy that an object possesses due to its motion or position. Mechanical energy is conserved in a closed system, meaning that it can neither be created nor destroyed. The formula for kinetic energy is KE = 1/2mv², where m is the mass of the object and v is its velocity.
There are various forms of potential energy, such as gravitational potential energy, elastic potential energy, and chemical potential energy. The formula for gravitational potential energy is PE = mgh, where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above a reference point.
To learn more about Mechanical energy visit here:
brainly.com/question/14688403
#SPJ4
he pyramidal motor tract carries signals from the motor cortex of each cerebral hemisphere to side(s) of the spinal cord, whereas the extrapyramidal motor tracts carry signals from various subcortical structures to side(s) of the spinal cord.
The pyramidal motor tract carries signals from the motor cortex of each cerebral hemisphere to the opposite (contralateral) side of the spinal cord, whereas the extrapyramidal motor tracts carry signals from various subcortical structures to both sides (bilateral) of the spinal cord.
The pyramidal motor tract is responsible for voluntary movement and fine motor control, while the extrapyramidal motor tracts are responsible for involuntary movement, and muscle tone, and the pyramidal motor tract, also known as the corticospinal tract, is a collection of nerve fibers that originates in the motor cortex of each cerebral hemisphere and descends through the brainstem and spinal cord. posture. Both tracts are important for coordinating and controlling motor functions in the body.
To learn more about Pyramidal :
https://brainly.com/question/13961844
#SPJ11
A man is attempting to lift a crate using a two part pulley system as shown in the image. The crate has mass m2 = 53 kg, and the man has m1 = 75 kg. He pulls downward on the rope with a force of magnitude F = 659 N. The pulleys are massless and frictionless.1.) Using T to describe the magnitude of the tension force, write an expression for the sum of the forces in the y direction acting on the crate, in terms of gravity and the variables provided.2.) what is the blocks acceleration in m/s^2?
1.) The sum of the forces in the y direction acting on the crate is given by the equation: F_y = m2g - T, where m2 is the mass of the crate, g is the gravitational acceleration (9.81 m/s^2), and T is the tension force.
2.) The acceleration of the block is given by the equation: a = F/m2 = 659 N / 53 kg = 12.4 m/s^2.
Here you can learn more about acceleration
https://brainly.com/question/3046924#
#SPJ11
(PLS HELP!!!) Meadow voles are small mouse-like animals that eat plants and insects. Their niche in an ecosystem is a
A.
omnivore.
B.
herbivore.
C.
producer.
D.
scavenger.
Their niche in an ecosystem is a B. herbivore.
Define about the ecosystem ?
An ecosystem is a community of living organisms and their physical environment, interacting as a system. It can be as large as a whole forest or as small as a puddle of water.
An ecosystem is composed of both biotic factors (living things) and abiotic factors (non-living things).
Examples of biotic factors include plants, animals, and microorganisms, while abiotic factors include things like water, air, temperature, and soil. These factors interact with each other in complex ways, such as through food chains and nutrient cycling, to maintain the overall balance of the ecosystem.
Ecosystems can be found in many different environments, including deserts, oceans, forests, and grasslands, and each one has its own unique set of organisms and interactions.
To learn more about ecosystem follow the given link: https://brainly.com/question/24155138
#SPJ1
In which situation is the principal of cross-cutting relationships useful in determining relative age?
The principle of cross-cutting relationships is useful in determining relative age in situations where geological features such as faults, and erosion surfaces cut across layers of rock.
By applying this principle, geologists can determine the relative age of the features based on their relationship to the surrounding rock layers. For example, if a fault cuts across a layer of rock, it must be younger than the layer it cuts through. Erosion surfaces that cut across multiple layers of rock can also be used to determine relative age, with the surface being younger than the layers it cuts across.
Overall, the principle of cross-cutting relationships is useful in determining the relative timing of events that have occurred in a geological area.
To know more about cross-cutting relationships, here
brainly.com/question/19550092
#SPJ4
(PLS HELP!!!) Which best describes the ecosystem of a lake or pond?
A.
They are aquatic because they are made of land.
B.
They are aquatic because they are made of water.
C.
They are terrestrial because they are made of land.
D.
They are terrestrial because they are made of water.
Answer: B.
Explanation:
Lakes and ponds are considered aquatic regions, as almost all life in them is marine.
The term associated with such strange hypothetical scenarios is ""Maxwell’s demon. "" Imagine this randomly weird world for a minute. Then describe something that would make it very difficult (or at least interesting) to live in a Maxwell’s-demon world. Also explain why you think these strange events don’t happen on a random basis in real life
In a Maxwell's-demon world, physical processes would be unpredictable, making it difficult to live. However, these strange events don't occur randomly in reality due to the second law of thermodynamics, ensuring predictability and consistency in physical processes.
In a Maxwell's-demon world, where the second law of thermodynamics is violated, it would be very difficult to live if physical processes were unpredictable and inconsistent. For example, if a person couldn't predict the behavior of objects or if the laws of physics randomly changed, it would make it nearly impossible to live in such a world. This would be because the everyday processes and technological devices we rely on wouldn't work consistently, leading to chaos and unpredictability.
These strange events don't happen on a random basis in real life because of the second law of thermodynamics, which states that entropy in a closed system can only increase or remain constant over time. Thus, it is impossible for a system to continuously extract work without a corresponding increase in entropy. Real-life systems are subject to this law, leading to predictability and consistency in physical processes.
Learn more about thermodynamics here: brainly.com/question/1368306
#SPJ4
COLOR LOCK-Arrange Letters in an order (First Letter Only - R = Red, B = Blue,
Brown, Black, Y = Yellow, etc. ) (ALL CAPS)
Help
In alphabetical order the sequence will be: Black, Blue, Brown, Yellow.
Character strings are arranged according to their positions in the traditional alphabetical ordering using the alphabetical order method. It is one of the sorting techniques. Lexicographical ordering in mathematics is the extension of alphabetical ordering to other data categories, such as number sequences or other ordered mathematical objects.
The alphabetical order is typically known as a lexicographical order when applied to strings or sequences that may also contain digits, numbers, or more complex kinds of elements.
To know more about alphabetical order go through:-
https://brainly.com/question/26971639
#SPJ4
Rearranging the letters in COLOR LOCK while assigning colors based on their first letter yields the sequence COKLORC.
Assigning colors based on the first letter of each letter in COLOR LOCK results in the following sequence: COKLORC. The first letter "C" can be assigned to the color cyan, which is a combination of blue and green. The letter "O" can be assigned to the color orange, which is a warm color made from a mix of red and yellow. The letter "K" can be assigned to the color black, which is a classic and versatile hue. The second "L" can be assigned to the color lavender, which is a light shade of purple. The "O" can be assigned to the color olive, which is a yellowish-green hue. The letter "R" can be assigned to the color red, which is a vibrant and energetic color. Lastly, the letter "C" can be assigned to the color cyan once again.
learn more about Rearranging here:
https://brainly.com/question/29668964
#SPJ4
6. A student placed a cardboard box at the
bottom of a hill. The student then released a
ball from a point on the hill. The ball collided
with the box, and the box moved a distance
of 2 meters before both the box and the ball
came to rest. Which change to the initial
conditions would be most likfly to result in
the box moving a greater distance?
A. Decreasing the mass of both the ball and the
box
B. Decreasing the mass of the ball and
increasing the mass of the box
C. Increasing the mass of the ball and
releasing it from a lower point on the hill
D. Decreasing the mass of the box and
releasing the ball from a higher point on
the hill
The correct option for the given question is D. Decreasing the mass of the box and releasing the ball from a higher point on the hill.
A cardboard box was placed at the bottom of a hill, and a ball was released from a point on the hill. The box moved a distance of 2 meters before coming to rest, along with the ball. To move the box a greater distance, a change in the initial conditions is required. It can be achieved by decreasing the mass of the box and releasing the ball from a higher point on the hill.
According to the law of conservation of momentum, the total momentum before and after the collision is conserved. If the mass of the box is decreased, its momentum will be less after the collision. Therefore, the momentum of the ball will be greater than the momentum of the box, allowing it to move the box to a greater distance. Thus the correct option is Option D.
For such more questions on momentum :
brainly.com/question/1042017
#SPJ11
An object of mass 2 kg is undergoing simple harmonic motion represented by the graph of displacement versus time shown above. If the amplitude of the motion is 3 m, what is the magnitude of the net force on the mass at t=15s?
The magnitude of the net force on the mass at t=15s is 2.36 N.
What is the net force on the mass?The net force on the mass is calculated by applying Newton's second law of motion as follows;
F (net) = ma
where;
m is the mass of the objecta is the acceleration of the object.The acceleration of a simple harmonic motion can be expressed by the following formula:
a = -ω²x
where:
a = accelerationx = displacement from the equilibrium positionω = angular frequency of the motionIn this formula, the negative sign indicates that the acceleration is opposite in direction to the displacement, which is a defining characteristic of simple harmonic motion.
The angular frequency ω is related to the period T and the frequency f of the motion by the formulas:
ω = 2π/T = 2πf
The frequency of this oscillation is calculated as follows;
when the object makes one complete cycle, the time period = 9 seconds
f = n/T
f = 1/9
f = 0.1 Hz
ω = 2πf
ω = 2π x 0.1 = 0.628 rad/s
The acceleration of the object is calculated as;
a = ω²x
(the displacement, x at 15 s = amplitude of the motion = 3 m)
a = (0.628²) x (3)
a = 1.18 m/s²
The net force on the mass is calculated as;
F (net) = ma
F (net) = 2 kg x 1.18 m/s²
F (net) = 2.36 N
Learn more about net force here: https://brainly.com/question/14361879
#SPJ1
WILL MARK BRAINLIEST!!!
From the choices below, select the one that best describes the difference between distance and displacement.
Distance includes direction,
Distance includes acceleration, displacement does not
Displacement includes direction, distance does not
Distance include speed, displacement, does not
Displacement includes direction, distance does not
is your answer. hope it helps!
Part (A) A light, rigid rod of length
ℓ = 1. 00 m
joins two particles, with masses
m1 = 4. 00 kg
m2 = 3. 00 kg
at its ends. The combination rotates in the xy-plane about a pivot through the center of the rod. Determine the angular momentum of the system about the origin when the speed of each particle is 6. 40 m/s.
I got the answer to be 22. 4 with a +z direction.
Part (B) What would be the new angular momentum of the system (in kg · m2/s) if each of the masses were instead a solid sphere 10. 5 cm in diameter?
I'm not sure how this changes the equation. All my attempts are incorrect so far
In Part A, the angular momentum of the system about the origin can be calculated using the formula:
L = r × p, where r is the position vector from the origin to the center of mass of the system, and p is the linear momentum of the system. In this case, since the system is rotating in the xy-plane about the origin, the angular momentum is in the +z direction. The position vector r is perpendicular to the plane of rotation and has a magnitude of ℓ/2. The linear momentum of each particle is mvi, where vi is the speed of the particle. Using this information, we can calculate the angular momentum of the system as: L = (ℓ/2) × (m1v1 - m2v2). Substituting the given values, we get: L = (1/2) × (4.00 kg × 6.40 m/s - 3.00 kg × 6.40 m/s) = 22.4 kg·m^2/s. In Part B, we need to find the new angular momentum of the system if each of the masses were instead a solid sphere 10.5 cm in diameter. In this case, we can assume that the spheres rotate about their own center of mass. The moment of inertia of each sphere can be calculated using the formula for the moment of inertia of a solid sphere: I = (2/5) × mr^2, where m is the mass of the sphere and r is the radius of the sphere. Substituting the given values, we get: I = (2/5) × (m/4π) × (10.5/200)^2, where m = 4.00 kg for one sphere and m = 3.00 kg for the other sphere. The total moment of inertia of the system can be found by adding the moments of inertia of the two spheres. We can then use the formula for the angular momentum of a rotating object: L = Iω, where ω is the angular velocity of the system. However, we do not have enough information to find the angular velocity ω. Therefore, we cannot find the new angular momentum of the system with the given information.
To learn more about angular momentum click the link below
brainly.com/question/29897173
#SPJ4
Consider the diagram of a pendulum's motion shown above. A pendulum can be used to model the change from potential energy to kinetic energy and back to potential energy. If you pull the bob back to point A and release it, potential energy is converted to kinetic energy. What do you think happens to the energy at point C?
A Potential energy is converted to kinetic energy.
B Potential energy decreases.
C Kinetic energy increases.
D Kinetic energy is converted to potential energy.
At point C of a pendulum's motion, kinetic energy is converted back into potential energy.
As the pendulum bob moves upward from the lowest point of its swing, its speed decreases and its potential energy increases. At point C, the pendulum bob has stopped momentarily, so it has no kinetic energy. However, it has gained potential energy as a result of its increased height. As the pendulum bob continues to move upward towards point D, its potential energy will continue to increase, while its kinetic energy decreases.
Therefore, the correct answer is D, Kinetic energy is converted to potential energy.
What is potential energy?
Potential energy is a form of energy that an object possesses due to its position or configuration in a system. It is the energy that an object has because of its position relative to other objects, or because of the forces acting on it.
What is kinetic energy?
Kinetic energy is the energy that an object possesses due to its motion. It is a form of energy that an object has because of its speed and mass. The formula for kinetic energy is:
KE = 1/2 * m * v^2
where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object.
To know more about potential energy, visit:
https://brainly.com/question/24284560
#SPJ1
The energy (E) of photon depends upon its wavelngth 'λ' , Planck's constant ' h ' and velocity
' c'. Derive the formula for energy using dimensional analysis
The formula for energy of a photon in terms of its wavelength, Planck's constant, and the speed of light is:
E = (hc)/λ
We can use dimensional analysis to derive the formula for energy of a photon in terms of its wavelength, Planck's constant, and the speed of light.
A photon's energy can be written as:
E = f × h
where
f is the frequency of the photon and h is Planck's constant.
We know that the frequency of a photon is related to its wavelength and the speed of light by the following equation:
f = c/λ
where c is the speed of light and λ is the wavelength.
Substituting this expression for f into the equation for energy, we get:
E = (c/λ) × h
Now let's check the dimensions of each term in this expression using brackets [] to represent dimensions:
[c/λ] = [L/T] / [L] =[tex][T^{-1} ][/tex]
[h] = [[tex]M L^2 T^{-1}[/tex]]
Therefore, the dimensions of the product (c/λ) × h are:
[tex][T^{-1} ] \times [M L^2 T^{-1} ] = [M L^2 T^{-2} ][/tex]
This is the dimension of energy (which can be expressed as[tex][M L^2 T^{-2} ]).[/tex]
Therefore, we can conclude that the formula for energy of a photon in terms of its wavelength, Planck's constant, and the speed of light is:
E = (hc)/λ
for such more question on Planck's constant
https://brainly.com/question/30991884
#SPJ4
Compilation of fashion accessories articles in the Philippines
HAMMER. It is utilized to fall to pieces of shisha material privately called (aluminum alloy) for simple liquefying. Forceps. It is a hand instrument commonly utilized for twisting and compacting many materials. Texture Paste, WOOLEN YARN, NEEDLE, SCISSORS, HAND Devices, AND Record Apparatuses.
In fashion, an accessory is a thing used to contribute, in an optional way, to a singular outfit. Accessories are much of the time decided to finish an outfit and supplement the wearer's look.[1] They have the ability to additional express a singular's character and character. Accessories come in various shapes, sizes, tones, and so on. The term came into utilization in the twentieth 100 years.
Fashion accessories can be inexactly ordered into two overall areas: those that are conveyed and those that are worn. Generally conveyed accessories incorporate totes and purses, hand fans, parasols and umbrellas, wallets, sticks, and stately blades. Accessories that are worn may incorporate coats, boots and shoes, cravats, ties, caps, hats, belts and suspenders, gloves, muffs, pieces of jewelry, wristbands, watches,[a] eyewear, bands, cloaks, scarves, cords, socks, pins, piercings, rings, and stockings.[1]
The kind of accessory that an individual decides to wear or convey to supplement their outfit is not entirely set in stone by a few elements, including the particular setting of where the individual is going. For instance, assuming an individual will work their decision of accessory would contrast from somebody who is going out to beverages or supper; along these lines relying upon work or play various accessories would be picked. Likewise, a person's conservative status, the strict and social foundation would likewise be a contributing component
to know more about alloy click here:
https://brainly.com/question/1759694
#SPJ4
the complete question is:
what is the Compilation of fashion accessories articles in the Philippines?
These articles discuss a range of issues regarding fashion accessories in the Philippines, such as up-and-coming accessory firms, sustainable fashion, traditional accessories, and styling advice. Individuals with an interest in Filipino fashion, provide knowledge and inspiration.
The fashion accessories industry in the Philippines is vibrant and diverse. These articles provide valuable insights into various aspects of the industry. From emerging accessory brands and local designers making waves globally to sustainable and traditional accessories, there is something for everyone. Style tips and practical advice are also available for those looking to elevate their accessorizing game. The beauty and craftsmanship of locally-made accessories are celebrated, and options for budget-conscious shoppers are provided. These articles showcase the richness and diversity of the Philippine fashion scene and its contribution to the global fashion industry.
learn more about fashion accessories here:
https://brainly.com/question/30809653
#SPJ4
26. A container has 2.5 litres of water at 20C. How much heat is
required to boil the water?
a) 840000 J
c) 880000 J
b) 800000 J
d) 900000J
You are sitting on a bus holding a book in your lap. A friend outside the bus watches you move forward, towards the north. Which statement best describes how the book's motion is relative to the frame of reference – you and your friend? You observe the book not moving, but your friend observes it moving north. You and your friend both observe the book moving to the north. Your friend observes the book accelerating south, while you see it standing still. You and your friend observe the book's velocity decreasing.
You and your friend both observe the book moving to the north. This is because the motion of the book is relative to the frame of reference – you and your friend – and since you are both moving in the same direction.
What is motion?Motion is the process of changing position over time. It is an essential concept in physics, and can be seen in everyday activities, including walking, driving, and throwing a ball. Motion is a relative concept, and is commonly described using concepts such as velocity, acceleration, and displacement. To describe motion, one must include both the direction and the magnitude of the change in position. In the physical sciences, motion is described using the laws of classical mechanics, which are based on Isaac Newton's laws of motion. These laws describe how an object's motion can be affected by forces such as gravity, friction, and tension.
To learn more about motion
https://brainly.com/question/26083484
#SPJ9
A main idea of the article is that the glowworm is a very unusual and beautiful insect. Give two details from the passage that support this statement
Two details from the passage to show that the glowworm is a very unusual and beautiful insect are:
Their light display is so beautiful that it looks like the sky at night They are able to use their light to capture their prey.What are glowworms?Glowworms are the larvae of certain species of insects that belong to the family Lampyridae, which includes fireflies. These larvae are bioluminescent, which means they can produce light through a chemical reaction in their bodies.
Glowworms are most often seen in dark environments, such as caves or forests at night. They use their light to attract prey, which includes small insects and other invertebrates. The beauty and unusual nature of glowworms has captured the imagination of people for centuries. They are often associated with magic and mystery, and their ability to produce light without heat has been the subject of scientific investigation for many years.
Find out more on glowworms at https://brainly.com/question/11635081
#SPJ1
A radio waves transmitted from a certain radio station is represented by the wave equation: y=0.75 sin〖(0.67πx-2×10^8 πt)〗
Calculate the (i) wavelength of the wave (ii) frequency of the wave (ii) velocity of the wave. Where x, y are in meters while t is in seconds
The frequency of a wave is the number of times a wave passes a point in a given amount of time. It is calculated by the formula: f = v/λ, where v is the velocity of the wave and λ is the wavelength of the wave.
What is velocity?Velocity is a vector quantity that measures the rate and direction of an object's change in position over a specific period of time. It is the rate at which an object moves from one point to another, expressed as distance over time. Velocity is commonly expressed in meters per second (m/s) or kilometers per hour (km/h). Velocity is a fundamental concept in physics and is often used to calculate other physical quantities such as force, acceleration, momentum, and kinetic energy. Velocity is a crucial element in the study of motion and is related to the concepts of speed, displacement, and acceleration.
In the given equation, y = 0.75 sin〖(0.67πx-2×10^8 πt)〗
(i) Wavelength: The wavelength of a wave is the distance between two consecutive points of a wave. It is calculated by the formula: λ = v/f, where v is the velocity of the wave and f is the frequency of the wave.
In the given equation, y = 0.75 sin〖(0.67πx-2×10^8 πt)〗
We know that, v = λf
So,
λ = v/f = (2×10^8 πt)/0.67π
= 3×10^7 t
Therefore, the wavelength of the wave is 3×10^7 t meters.
To learn more about velocity
https://brainly.com/question/29223620
#SPJ9
A capacitor is formed from two identical conducting parallel plates separated by a distance d One plate is charged Q. the other plate is charged -Q. A dielectric slab fills the space between the two plates. Where is the energy stored in this capacitor? A) On the outsides of the metal plates. B) On the insides of the metal plates. C) On the outside su face of the dielectric slab D) Inside the dielectric slab,
The energy in a capacitor is stored inside the dielectric slab. Therefore, the correct answer is D) Inside the dielectric slab.
A capacitor is a device that stores electrical energy in an electric field. It is made up of two conductive plates separated by a dielectric material. When a voltage is applied across the plates, an electric field is created between them, and the energy is stored in this field.
In the case of the capacitor described in the question, the energy is stored inside the dielectric slab that fills the space between the two plates. This is because the electric field is strongest in the region between the plates, where the dielectric material is located. The energy is stored in the form of an electric field within the dielectric material, and this is where the energy is stored in the capacitor.
To learn more about Capacitor :
https://brainly.com/question/27258294
#SPJ11
Rough Surface with: Ms = 0. 8 HK = 0. 4
(a) Find the magnitude of the
force F needed to prevent the
book from sliding down the
rough wall.
F
M = 1. 5 kg
600
(b) Find the minimum force F
needed to set the book in
motion up the rough wall with
constant velocity
a) The magnitude of the force F needed to prevent the book from sliding down the rough wall is 6 N.
b) The minimum force F needed to set the book in motion up the rough wall with constant velocity is 6 N, which is equal to the force of friction acting on the book.
a) To find the magnitude of the force F needed to prevent the book from sliding down the rough wall, we need to consider the forces acting on the book. There are two forces acting on the book: the force of gravity, which pulls the book downward with a force of mg = (1.5 kg)(9.81 m/s^2) = 14.715 N, and the force of friction, which acts in the opposite direction of motion.
The force of friction can be calculated using the formula:
f = μN
where μ is the coefficient of friction (js = 0.8), and N is the normal force acting perpendicular to the surface of the wall. Since the wall is at an angle of 60 degrees to the horizontal, the normal force can be calculated as:
N = mg cos θ = (1.5 kg)(9.81 m/s^2) cos 60° = 7.5 N
Substituting the values, we get:
f = μN = (0.8)(7.5 N) = 6 N
Since the book is not moving, the force F acting on it must be equal and opposite to the force of friction, i.e., F = f = 6 N.
Therefore, the magnitude of the force F needed to prevent the book from sliding down the rough wall is 6 N.
b) To find the minimum force F needed to set the book in motion up the rough wall with constant velocity, we need to consider the forces acting on the book again. Since the book is moving with constant velocity, the net force acting on it must be zero. Therefore, the force of friction must be equal and opposite to the force F applied to the book.
The force of friction can be calculated as before, using the formula:
f = μN = (0.8)(7.5 N) = 6 N
To find the minimum force F needed to set the book in motion up the wall, we need to overcome the force of friction. Therefore, we need to apply a force greater than or equal to the force of friction. If we apply a force slightly greater than 6 N, the book will start moving up the wall with an acceleration
Learn more about force of friction here
brainly.com/question/8935141
#SPJ4
The given question is incomplete, the complete question is:
Rough Surface with: js = 0.8 HK = 0.4 (a) Find the magnitude of the force F needed to prevent the book from sliding down the rough wall m= 1.5kg , θ=60degree b)Find the minimum force F needed to set the book in motion up the rough wall with constant velocity
a small rope has a linear mass density of 8.00 g/m and is tied to two vertical walls that are separated by three fourths the length of the rope, as shown in the figure. a box of mass m is hanging from the rope halfway between its ends. (a) find an expression for the speed of a wave on the rope as a function of m. (b) what must the mass of the box be to have a wave speed of 65.0 m/s? (c) using the proportionality sensemaking technique, would you expect the mass of the box to increase or decrease if the wave speed needed to be 130 m/s? by what factor would the mass increase?
a. The speed of the wave in the ropes is [tex]30.43 \sqrt{m/s}[/tex]
b. 4.56 kg
What is Linear Mass Density?Linear mass density, also known as linear density, is a measure of the mass per unit length of a one-dimensional object such as a string, wire, or rod. It is defined as the mass of the object divided by its length, and has units of mass per unit length, such as kg/m or g/cm.
For example, if a wire has a mass of 10 grams and a length of 2 meters, its linear mass density would be 5 g/m. Linear mass density is an important concept in physics and engineering, as it is used to describe the properties of one-dimensional objects under tension, compression, and other forces.
The answer and solution are in the attached images.
Read more about linear mass density here:
https://brainly.com/question/14463946
#SPJ1
4.5.1 Explain how UV light can cause damage to one's eyes. 4.5.2 Explain the reason for using UV light in butcheries.
(1) UV (ultraviolet) light can cause damage to one's eyes because it is a type of radiation that is invisible to the human eye.
(2) In a butchery setting, UV-C disinfection can be used to sanitize surfaces such as meat slicers, cutting boards, and countertops.
How does ultraviolet light cause damage to eyes?When we are exposed to UV light, it can penetrate the outer layer of our eyes and reach the lens and the retina.
This UV light can cause a range of problems, such as:
Photokeratitis: Also known as "snow blindness"CataractsMacular degenerationUV light is used in butcheries for a process called "UV-C disinfection". UV-C light has a wavelength of between 200 and 280 nanometers, which is capable of killing bacteria, viruses, and other microorganisms.
Learn more about ultraviolet light here: https://brainly.com/question/23342892
#SPJ1
You are rowing your boat in order to cross a river with a fast moving current which flows eastward. You angle the bow (front) of the boat in order to reach a point due north directly across the shore from you and begin to row at 4 m/s. If the current in the river has a speed of 2 m/s, you should angle the bow of the boat O due east O 30° East of North O 45° North of West O 30° West of North O due north O due west
Answer:
Let V be the speed of the boat (vector quantity)
R is the speed of the river
We want to add these two vectors to get a vector point straight north
If V is the speed of the boat to the northwest and R is the speed of the river we have
V + R = N (vector quantities)
Sin θ = R / V = 2 / 4 = 1/2 θ = 30 deg
One should angle the boat 30 deg west of north
You should angle the bow of the boat 30° West of North in order to reach a point due north directly across the shore from you.
This is because the current in the river is flowing eastward at a speed of 2 m/s, which means that it will push your boat to the east.
In order to counteract this force and reach the point directly across the shore from you, you need to angle the bow of the boat slightly to the west.
By angling the bow of the boat 30° West of North, you will be able to use the force of the current to help you move northward while also counteracting the force of the current pushing you to the east.
This will allow you to reach the point directly across the shore from you.
Here is a step-by-step explanation of how to calculate the angle of the bow of the boat:
1. Draw a diagram of the situation, with the boat in the center and the current flowing from left to right (eastward).
2. Draw a vector representing the velocity of the boat, with a magnitude of 4 m/s and an angle of 30° West of North.
3. Draw a vector representing the velocity of the current, with a magnitude of 2 m/s and an angle of 0° (due east).
4. Use the Pythagorean theorem to find the magnitude of the resultant vector, which represents the velocity of the boat relative to the shore.
5. Use trigonometry to find the angle of the resultant vector, which represents the angle of the bow of the boat.
Therefore, the answer is 30° West of North.
To know more about angle, refer here:
https://brainly.com/question/29000166#
#SPJ11
9. Kinetic molecular theory postulates are written for ideal gas behavior. In reality, gases to not behave ideally. For example, water molecules are polar and create surface tension through hydrogen bonds, even in vapor form. This explains why clouds are formed. Which postulate of the kinetic molecular theory is untrue for the formation of clouds?
The frequency of wall contacts and thus the pressure of the gas increase as the number of gas particles in the container rises.
How does the kinetic theory of molecules explain how ideal gas molecules behave?The kinetic molecular theory of gases explains how ideal gases behave. Pressure is explained by molecular motion, which causes collisions between molecules and the container walls. Gases' great compressibility is explained by the enormous intermolecular distances between their molecules.
Which kinetic molecular theory postulate explains the fact that a gas's pressure rises as its temperature does?Charles' rule. Only by increasing the volume the gas occupies can a steady pressure be maintained while the temperature of the gas rises.
To know more about frequency visit:-
brainly.com/question/3795295
#SPJ1
If a 1-megaton nuclear weapon is exploded at ground l
Answer:
thats gonna be a huge problem
Explanation:
If a 1 MEGATRON nuke falls on ground and explodes upon impact thats uhoh becuase many people can die and many houses will be destroyed.