Isoniazid is used in the treatment of tuberculosis and multiple sclerosis. Identify each lone pair as either localized or delocalized. Justify your answer in each case.

Explanation:

thank you for the points

Answer:

8.879 moles.

Explanation:

From the question given above, the following data were obtained:

Molar mass of water = 18.02 g/mol

Mass of water = 160.0 g

Mole of water =?

Mole is defined by the following equation:

Mole = mass / molar mass

With the above formula, we can obtain the number of mole present in 160 g of water. This can be obtained as follow:

Molar mass of water = 18.02 g/mol

Mass of water = 160.0 g

Mole of water =?

Mole = mass / molar mass

Mole of water = 160 / 18.02

Mole of water = 8.879 moles.

Therefore, 160 g of water contains 8.879 moles.

Answer:

See EXPLANATION

Explanation:

We must bear in mind that in balancing chemical reaction equations, the number of atoms of each element on the right hand side must be the same as the number of atoms of the same element on the left hand side of the reaction equation. This follows from the law of conservation of mass.

Based on this;

There are two oxygen atoms on the  left hand side of the reaction equation, thus total mass of oxygen = 2 * 16 amu = 32 amu

There are two oxygen atoms on the product side of the reaction equation, thus the total mass of oxygen = 2 * 16 amu = 32 amu

Answer:

dimond is stronger

Explanation:

Answer:

Graphite and Diamond are different because they have different structures. ... However each carbon atom in Diamond has 4 covalent bonds with other Carbons, making it extremely strong and hard. On the other hand, each carbon in graphite is bonded to three carbons, and therefore graphite is formed in layer

Also:

Each carbon atom in a diamond is linked to four other carbon atoms. Each carbon atom in graphite is linked to three other carbon atoms. Diamond is poor conductor of electricity due to the absence of free electrons. Graphite is good conductor of electricity due to the presence of free electrons in its structure.

Explanation:

Hope this helps

Explanation:

There are 6.022x1023 molecules in 1 mole of SO3 (Avogadro's number) so in 0.25 moles, there are (0.25)(6.022x1023) molecules in the 0.25 moles of SO3. or 1.506x1023 molecules per 0.25 moles of SO3.

There is one atom of sulfur in each molecule of SO3. So there are 1.506x1023 atoms of sulfur in 0.25 moles of SO3.

According to the concept of Avogadro's number there are 0.7525 ×10²³ atoms of sulfur in 0.125 moles of sulfur.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

In the given example, number of atoms of sulfur are calculated as, Avogadro's number×number of moles, that is,6.022×10²³ ×0.125=0.75275×10²³ atoms

Therefore, there are 0.75275×10²³ atoms in 0.125 moles of sulfur.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

Answer:

[tex]\frac{250}{3}[/tex]

Explanation:

you can expect to get a 3 (theoretically) 1 time every 6 times you roll. A 1/6 chance.

Here's the equation:

[tex]\frac{1}{6} =\frac{x}{500}[/tex]

cross multiply (i think that's what it is called)

500=6x

divide by 6 on both sides:

x=[tex]\frac{250}{3}[/tex] or approx 83 times.

Hope this helps! Lmk if u have more questions <3

Answer:

13%

Explanation:

Answer:

The final volume will be "70.08 mL".

Explanation:

The given values are:

Molar mass,

M1 = 548 nM

or,

     = [tex]5.48\times 10^{-7} \ M[/tex]

M2 = 484 nM

or,

      = [tex]4.84\times 10^{-7} \ M[/tex]  

Volume,

V1 = 61.9 mL

V1 = ?

By using the expression, we get

⇒ [tex]M1\times V1=M2\times V2[/tex]

or,

⇒            [tex]V2=\frac{M1\times V1}{M2}[/tex]

By substituting the values, we get

                    [tex]=\frac{5.48\times 10^{-7}\times 61.9}{4.84\times 10^{-7}}[/tex]

                    [tex]=\frac{339.212}{4.84}[/tex]

                    [tex]=70.08 \ mL[/tex]

Answer:

C. some substances can move freely across the cell membrane, while others must be transported.

Explanation:

Answer:

[tex]V_2=8.4L[/tex]

Explanation:

Hello there!

In this case, according to the definition of the Boyle's law, which describes de pressure-volume behavior as an inversely proportional relationship, it is possible for us to write:

[tex]P_1V_1=P_2V_2[/tex]

Thus, since we are given the initial pressure and temperature, and the final pressure, we are able to calculate the final volume as shown below:

[tex]baV_2=\frac{P_1V_1}{P_2}\\\\V_2=\frac{8.0L*1.013bar}{ 0.968bar}\\\\V_2=8.4L[/tex]

Regards!

Answer:

what is the volume of the water at 307 k?

Answer:

[tex]\Delta _{fus}H=205J/g=13.03kJ/mol[/tex]

Explanation:

Hello there!

In this case, since the heat of fusion is a property that allows us to calculate the heat involved during the change from solid to liquid (fusion) and is calculated as shown below:

[tex]Q=m*\Delta _{fus}H[/tex]

In such a way, given the heat involved during this process and the mass of copper, we calculate the heat of fusion as shown below:

[tex]\Delta _{fus}H=\frac{Q}{m}=\frac{41000J}{200.g}\\\\\Delta _{fus}H=205J/g[/tex]

Or in kJ/mol:

[tex]\Delta _{fus}H=205\frac{J}{gCu}*\frac{63.546 gCu}{1molCu}\\\\ \Delta _{fus}H=13026.93J/mol=13.03kJ/mol[/tex]

Regards!

Answer:chemical formula of acetic acid is  or

so, molecular mass of acetic acid = 2 × atomic mass of C + 4 × atomic mass of H + 2 × atomic mass of O

= 2 × 12 + 4 × 1 + 2 × 16

= 24 + 4 + 32

= 60g/mol

given mass of acetic acid = 22g

so, no of moles of acetic acid = given mass/molecular mass

= 22/60 ≈ 0.367

so, number of moles of acetic acid is 0.367mol

number of molecules in 0.367 mol of acetic acid = 6.022 × 10²³ × 0.367

= 2.21 × 10²³

Explanation:

Answer:

1) There are five main symbiotic relationships: mutualism, commensalism, predation, parasitism, and competition.

2) The term mutualism can be simply defined as a relationship in which both species are mutually benefited. This relationship can either be within the species or between the two different species. ... Here ants are the mutualist and acacia trees is the host. The acacia tree provides home and food for the ants.

3) Commensalism is a type of symbiotic relationship in which one species benefits, while the other species is neither harmed nor helped. The species that gains the benefit is called the commensal. ... An example is a golden jackal (the commensal) following a tiger (the host) to feed on leftovers from its kills.

4) Predation is the interaction between organisms in which one organism known as the predator kills another organism which is known as prey. ... Examples of predation are a lion eating deer or a snake eating rats. This results in the transfer of energy from the prey to the predator.

5) Parasitism is generally defined as a relationship between the two living species in which one organism is benefitted at the expense of the other. The organism that is benefitted is called the parasite, while the one that is harmed is called the host. A few examples of parasites are tapeworms, fleas, and barnacles.

6) Competition is a negative interaction that occurs among organisms whenever two or more organisms require the same limited resource. ... For example, animals require food (such as other organisms) and water, whereas plants require soil nutrients (for example, nitrogen), light, and water.

Symbiotic relationships are important because they are a major driving force of evolution. This networking and cooperation among species allows them to survive better than they would as individuals.

Answer:

A

Explanation:

brainliest pls

Explanation:

The number of moles of Al2O3 formed is approximately 4.25 moles. Second find the limiting reactant. Since O2 has less value that is 2.126 than Al that is 2.287, O2 is the limiting reactant in this reaction.

Answer:

A. Alkene

Explanation:

Alkenes are a class of hydrocarbons characterized by the possession of a carbon to carbon double bond (=) in their structure. This means that C=C is the functional group of alkenes. Alkenes have the general formula; CnH2n.

Based on the structure in the attached image, the structure can be identified to be an ALKENE because it possess a C=C functional group. Specifically, the IUPAC name of the structure is 1,2- dimethyl ethene.

Answer:

A

Explanation:

Law of conservation of matter

Answer:

The activated complex

Explanation:

The activated complex are the species that exists maximum in every energy profile of a reaction.

Activated complex is nothing but an intermediate state of reactants formed during its conversion from a reactant to product state in coarse of reaction.

The activated complex is formed at the maximum energy level in the reaction path. And this difference between energy of the activated complex and the energy of the reactants is only known as activation energy

Answer:

1.5 × 10³ g

Explanation:

Step 1: Given and required data

Step 2: Calculate the temperature change

ΔT = 28.5°C - 22.0 °C = 6.5 °C

Step 3: Calculate the mass (m) of water

We will use the following expression.

Q = c × m × ΔT

m = Q / c × ΔT

m = 41,840 J / (4.184 J/g.°C) × 6.5 °C = 1.5 × 10³ g

Answer:

I don't know

Explanation:

give me you research

The 3.13 g of K would be needed to completely react with the remaining [tex]Cl_2[/tex].

To determine which reactant is limiting, we need to calculate the amount of product that can be formed from each reactant and compare them. The reactant that produces less product is the limiting reactant, since the reaction cannot proceed further once it is consumed.

The balanced chemical equation for the reaction between solid potassium and chlorine gas is:

2 K(s) + [tex]Cl_2[/tex](g) -> 2 KCl(s)

From the equation, we can see that 2 moles of K react with 1 mole of [tex]Cl_2[/tex] to form 2 moles of KCl.

First, we need to convert the masses of K and [tex]Cl_2[/tex] into moles:

moles of K = 15.20 g / 39.10 g/mol = 0.388 mol

moles of [tex]Cl_2[/tex] = 2.830 g / 70.90 g/mol = 0.040 mol

Now, we can use the mole ratio from the balanced equation to calculate the theoretical yield of KCl from each reactant:

Theoretical yield of KCl from K: 0.388 mol K x (2 mol KCl / 2 mol K) = 0.388 mol KCl

Theoretical yield of KCl from [tex]Cl_2[/tex]: 0.040 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) = 0.080 mol KCl

We can see that the theoretical yield of KCl from K is 0.388 mol, while the theoretical yield of KCl from [tex]Cl_2[/tex] is 0.080 mol. Therefore, the limiting reactant is [tex]Cl_2[/tex], since it produces less product.

To determine how much more of the limiting reactant would be needed to completely consume the excess reactant, we can use the stoichiometry of the balanced equation.

We know that 1 mole of [tex]Cl_2[/tex] reacts with 2 moles of K to produce 2 moles of KCl. Therefore, the amount of additional K needed to react with the remaining [tex]Cl_2[/tex] can be calculated as follows:

moles of K needed = 0.040 mol [tex]Cl_2[/tex] x (2 mol K / 1 mol [tex]Cl_2[/tex])

                                = 0.080 mol K

This means that 0.080 moles of K would be needed to completely consume the remaining [tex]Cl_2[/tex]. We can convert this to a mass by multiplying by the molar mass of K:

mass of K needed = 0.080 mol K x 39.10 g/mol

                              = 3.13 g K

Therefore, The 3.13 g of K would be needed to completely react with the remaining.

Example verification:

Suppose we had an additional 0.50 g of [tex]Cl_2[/tex] in the reaction. Would all of the K be consumed, or would there still be excess K?

Moles of additional [tex]Cl_2[/tex] = mass of [tex]Cl_2[/tex] / molar mass of [tex]Cl_2[/tex]

Moles of additional [tex]Cl_2[/tex] = 0.50 g / 70.90 g/mol

Moles of additional [tex]Cl_2[/tex] = 0.0070 mol

The theoretical yield of KCl that can be formed from the additional [tex]Cl_2[/tex] is:

0.0070 mol [tex]Cl_2[/tex] x (2 mol KCl / 1 mol [tex]Cl_2[/tex]) x (74.55 g KCl / 1 mol KCl) = 1.04 g KCl

Therefore, the total amount of KCl that can be formed from all of the [tex]Cl_2[/tex] is:

5.95 g + 1.04 g = 6.99 g

The amount of K that would be needed to completely consume all of the [tex]Cl_2[/tex].

Learn more about Solid Potassium at

brainly.com/question/27549056

#SPJ1

Answer:

D Both are made of rock ,ice and solar dust from the beginning of the solar system

Answer:

The answer is D

Explanation:

Answer:

2.39 atm

Explanation:

We'll begin by calculating the number of mole in 0.41 g of neon (Ne). This can be obtained as follow:

Mass of Ne = 0.41 g

Molar mass of Ne = 20 g/mol

Mole of Ne =.?

Mole = mass / molar mass

Mole of Ne = 0.41 / 20

Mole of Ne = 0.0205 mole

Next we shall convert 200 mL to L.

1000 mL = 1 L

Therefore,

200 mL = 200 mL × 1 L / 1000 mL

200 mL = 0.2 L

Next, we shall convert 11 °C to Kelvin temperature.

T(K) = T(°C) + 273

T(°C) = 11 °C

T(K) = 11 + 273

T (K) = 284 K

Finally, we shall determine the pressure. This can be obtained as follow:

Mole of Ne (n) = 0.0205 mole

Volume (V) = 0.2 L

Temperature (T) = 284 K

Gas constant (R) = 0.0821 atm.L/Kmol

Pressure (P) =?

PV = nRT

P × 0.2 = 0.0205 × 0.0821 × 284

P × 0.2 = 0.4779862

Divide both side by 0.2

P = 0.4779862 / 0.2

P = 2.49 atm

Therefore, the pressure of the gas is 2.39 atm

Answer:1/4

Explanation:

Answer:

Radioactive decay is a random event.

Explanation:

on edge

Answer:

Radioactive decay is a random event.

Explanation:

Edge 2020