Is this equation balanced or unbalanced?
C+02=CO2

The question is incomplete. The complete question is :

C. Balance these fossil-fuel combustion reactions. (1 point)

C8H18(g) + 12.5O2(g) →    ____CO2(g) + 9H2O(g) + heat

CH4(g) + ____O2(g) →     ____CO2(g) + ____H2O(g) + heat

C3H8(g) + ____O2(g) →    ____CO2(g) + ____H2O(g) + heat

C6H6(g) + ____O2(g)  →   ____CO2(g) + ____H2O(g) + heat

Solution :

C8H18(g) + 12.5O2(g) →    __8__CO2(g) + 9H2O(g) + heat

When 1 part of octane reacts with 12.5 parts of oxygen, it gives 8 parts of carbon dioxide and 9 parts of water along with liberation of energy.

CH4(g) + __2__O2(g) →     __1__CO2(g) + __2__H2O(g) + heat

When 1 part of methane reacts with 2 parts of oxygen, it gives 1 part of carbon dioxide and 2 parts of water along with liberation of energy.

C3H8(g) + __5__O2(g) →    __3__CO2(g) + __4__H2O(g) + heat

When 1 part of propane reacts with 5 parts of oxygen, it gives 3 part of carbon dioxide and 4 parts of water along with liberation of energy.

C6H6(g) + __1/2__O2(g)  →   __6__CO2(g) + __3__H2O(g) + heat

When 1 part of propane reacts with 1/2 parts of oxygen, it gives 6 part of carbon dioxide and 3 parts of water along with liberation of energy.

The nucleons are havier in sub atomic particle like neutrons and protons.

fun fact i read in a book even 1cm³ of nucleons are around 2 million Kg which you can't pick up by hand even by machines like buldozer.

Answer:

Explanation:

Given the data in the question;

wavelength λ₁ = 853 nm = 853 × 10⁻⁹ m

wavelength λ₂ = 865 nm = 865 × 10⁻⁹ m

we determine the energy of each photons using the following expression;

[tex]E_{photon[/tex] = hc / λ

where h is Planck's constant ( 6.626 × 10⁻³⁴ J.s )

c is speed of light ( 3 × 10⁸ m/s )

For Photon with wavelength λ₁ = 853 × 10⁻⁹ m

[tex]E_{photon1[/tex] = hc / λ

we substitute

= ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (853 × 10⁻⁹ m)

= 1.9878 × 10⁻²⁵ / 853 × 10⁻⁹

= 2.33 × 10⁻¹⁹ J

For Photon with wavelength  λ₂ = 865 × 10⁻⁹ m

[tex]E_{photon2[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (865 × 10⁻⁹ m)

= 1.9878 × 10⁻²⁵ / 865 × 10⁻⁹

= 2.298 × 10⁻¹⁹ J

We know that; energy of the combined photon will be equal to the sum of energies of the two photons.

so

Energy of the combined photon = [tex]E_{photon1[/tex] + [tex]E_{photon2[/tex]

[tex]E_{combined[/tex] = 2.33 × 10⁻¹⁹ J + 2.298 × 10⁻¹⁹ J

[tex]E_{combined[/tex]  = 4.628 × 10⁻¹⁹ J

so wavelength of the new combined photon will be;

[tex]E_{combined[/tex] = hc / λ[tex]_{combined[/tex]

[tex]E_{combined[/tex]λ[tex]_{combined[/tex] = hc

λ[tex]_{combined[/tex] = hc / [tex]E_{combined[/tex]

we substitute

λ[tex]_{combined[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / 4.628 × 10⁻¹⁹ J

= 1.9878 × 10⁻²⁵ / 4.628 × 10⁻¹⁹

= 4.2952 × 10⁻⁷ m

= ( 4.2952 × 10⁻⁷ × 10⁹ )nm

= 429.5 nm

Therefore, Wavelength of the new 'combined' photon is 429.5 nm

We are given:

Initial concentration of HA: 0.200 Molar

The acid is 9.4% ionized

Dissociation constant (α) = (Percent Ionized) / 100 = 0.094

Molar concentration of H+ = 0.0188

Let's Chill! (making the ICE box):

Reaction:       HA         ⇄       H⁺      +      A⁻

Initial:           0.200M               -                -

Equilibrium: 0.200(1-α)      0.200α       0.200α

while we're here, let's confirm the given equilibrium concentration of H⁺ ions

from the table here, we can see that the equilibrium concentration of H⁺ ions is 0.200α, we know that α = 0.094

[H⁺] = 0.200α = 0.200 * 0.094 = 0.0188 M

which means that we're on the right track

We're basically scientists at this point (finding the dissociation constant):

Acid dissociation is nothing but the equilibrium constant, but for the dissociation of Acids

From the reaction above, we can write the equation of the acid dissociation constant:

Ka = [H⁺][A⁻] / [HA]

now, let's take the values from the 'equilibrium' row of the ice box the plug those in this equation

Ka = (0.200α)(0.200α) / [0.200(1-α)]

Ka = (0.200α)²/[0.200(1-α)]

plugging the value of α

Ka = (0.200*0.094)² / [0.200(0.906)]

Ka = (0.0188)² / 0.1812

Ka = 1.95 * 10⁻³

Answer:

B. 4.32 x 10-19 J is correct via a p e x

Explanation:

Answer:

[tex](NH_4)_3PO_4(aq)+3NaCl(aq)\rightarrow 3NH_4Cl(aq)+Na_3PO_4(aq)[/tex]

Explanation:

Hello there!

In this case, according to the given information, we can set up the appropriate chemical equation when ammonium phosphate reacts with sodium chloride in aqueous solution:

[tex](NH_4)_3PO_4(aq)+NaCl(aq)\rightarrow NH_4Cl(aq)+Na_3PO_4(aq)[/tex]

Which stands for a double replacement reaction, whereby ammonium changes phosphate to chloride and sodium changes chloride to phosphate on the products side. In addition, we can balance the aforementioned equation as shown below:

[tex](NH_4)_3PO_4(aq)+3NaCl(aq)\rightarrow 3NH_4Cl(aq)+Na_3PO_4(aq)[/tex]

Regards!

Answer:  the area of the telescope lens is \textit{0,08507 ft}

Explanation: Happy I could help!

Answer:

Your answer would be D, they are all non-renewable energy sources. Hope this helps!

Answer:

D. They are all nonrenewable energy sources.

Answer:

B. Ultraviolet

Explanation:

UV has a higher frequency and shorter wavelength than visible light

Answer:

Explanation:

Short answer: Yes.

The coefficients may not be conserved, but mass always has to be. Take this equation as an example

2 Mg3P2 ===>   6Mg + P4

There is a 2 on the left side and 6 and 1 on the right. I hope you mean that the coefficient 2 is not equal to 7.

But let's look a little closer. You have to look at the molecular structure of the left and right side.

2Mg3P2 has 6 Mgs and 4 Ps on the left side.

6Mg is on the right. They are free standing.

P4    has 1 molecule consisting of 4 Ps.

Everything balances.

This is a terrific question to be asking. You need to understand the internal balance numbers vs the molecular ones on the out side.

That sounds like a bit of gobbledygook and it takes a bit of study.

2 Mg3P2 means that Mg3P2 is written twice.

Mg3P2 ==> "3 Mg2+   +  2P3+   and there is another one written the same way.

Mg3P2 ==> "3 Mg2+   +  2P3+  

Answer:

Chloroplast

Explanation:

Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.

Answer:

0.144 M

Explanation:

First we convert 0.307 g of KHP (potassium hydrogen phthalate, KHC₈H₄O₄) into moles, using its molar mass:

1 mol of KHP reacts with 1 mol of NaOH, that means that in 10.40 mL of the NaOH solution there were 0.0015 moles of NaOH.

Now we calculate the molarity of the NaOH solution:

Nitric acid and potassium nitrite reacted together potassium nitrate and nitrous acid forms. The net ionic equation for the reaction is given below:

[tex]\rm K^{+} (aq)+ NO_{3} ^{-} (aq)\rightarrow KNO_{3}(s)[/tex]

A balanced reaction represents all the reactants and products in perfect stoichiometry. Thus, each element have to be equal in number on both side.

A balanced ionic equation represents all the ions participating in a reaction and with their charges balanced on both side and state of the reaction is given in brackets. Net ionic equation represents the formation of a solid precipitate.

The complete ionic equation of reaction of one mole of potassium nitrite with one mole of nitric acid is given below:

[tex]\rm K^{+} + NO_{2}^{-}(aq) + H^{+} (aq) +NO_{3}^{-}(aq) \rightarrow H^{+} (aq) + NO_{2}^{-}(aq) + KNO_{3} (s)[/tex]

Cancelling the aqueous ions from both sides we get the net ionic equation representing the formation of solid potassium nitrate as shown here:

[tex]\rm K^{+} (aq)+ NO_{3} ^{-} (aq)\rightarrow KNO_{3}(s)[/tex]

To find more on ionic equations, refer here:

https://brainly.com/question/15467502

#SPJ5

Answer:

24.24 g

Explanation:

First we calculate how many moles are there in 300 mL of a 0.234 M solution, using the definition of molarity:

Converting 300 mL to L ⇒ 300 mL / 1000 = 0.300 L

Then we convert 0.78 moles of NH₄F into grams, using its molar mass:

Answer:

4.42 x 10^24

Explanation:

1. You didn't post the question to Number 1.

2.

10% means There's 10g in 100ml of this solution.

This is the weight/volume(w/v) expression of concentration.

So

We have Mass =10g

volume =100ml

Molarity = Moles of solute/volume of solution(in LITRES)

Moles=Mass/Molar mass

Molar mass of NaOH=40g/mol

Mole=10/40

=0.25mole

Volume =100ml =0.1Litres

MOLARITY=0.25/0.1 =

=2.5M

OPTION B.

3. NOTE: THE MOLARITY AND NORMALITY OF NAOH AND HCL ARE THE SAME(This doesn't happen for all compounds tho)

So We can take 2.5N(Normality) of NaOH to be 2.5M(Molarity) NaOH

I think you forgot to write the Normality of the second one. I'll take it to be 1N. Maybe you can then Input supposed value when you're solving on your own

So

1N HCl is same as 1M HCL

We were given their respective volumes

2.5M NaOH can also be written as 2.5mole/volume(in Liters)

The volume of NaOH =10ml or 0.01L

Moles = 2.5mole/L x 0.01L

You notice that Liters on top and bottom cancels out... leaving the moles

So

Mole=0.01x2.5 = 0.025moles of NaOH

we're gonna do the same for 1N HCl in 20ml(0.02L)

So

Mole = 1 x 0.02 =0.02moles

Total Mole = 0.02 + 0.025 =0.045moles

The Final Volume is 100ml as stated in the question. It was diluted to 100ml or 0.1L

So

Final Concentration In Molarity

= Total Moles/Volume in L

=0.045/0.1

=0.45M.

Answer:

Linear

Explanation:

Answer:

Evaporation

Explanation:

Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere

Answer:

D0wnload Phot0Math......................

Explanation:

Answer:

non polar. polar ionic substance

Answer:

NCl₃

Explanation:

From the question given above, the following data were obtained:

Mass of nitrogen (N) = 0.77 mg

Mass of chlorine (Cl) = 6.61 mg

Empirical formula =?

The empirical formula of the compound can be obtained as follow:

N = 0.77 mg

Cl = 6.61 mg

Divide by their molar mass

N = 0.77 / 14 = 0.055

Cl = 6.61 / 35.5 = 0.186

Divide by the smallest

N = 0.055 / 0.055 = 1

Cl = 0.186 /0.055 = 3

Therefore, the empirical formula of the compound is NCl₃

Answer:

2Mg(s) + O2(g) ----->2MgO(s)

Explanation:

In writing a balanced chemical reaction equation, the rule of thumb is that the number of atoms of each element on the reactant side must be the same as the number of atoms of the same elements on the products side.

Hence for the reaction of magnesium and oxygen shown below;

2Mg(s) + O2(g) ----->2MgO(s)

We notice that there are two atoms each of magnesium and oxygen on both sides of the reaction equation hence the equation is balanced.

Answer:

When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that acetic acid is being converted to sodium acetate.

Explanation:

ABOUT TITRATION - Titration is a chemical analysis method for determining the amount of a constituent in a sample by adding an exact known quantity of another substance to the measured sample with which the desired constituent reacts in a specific, known proportion. A burette, which is essentially a long, graduated measuring tube with a stopcock and a delivery tube at the bottom end, is used to gradually administer a standard solution of titrating reagent, or titrant.

It is feasible to identify a good visual color indicator for many titration processes that will signify the end point at, or very near to, the equivalence point.

Acid-base titrations, precipitation titrations, complex-formation titrations, and oxidation-reduction (redox) titrations are examples of such titrations, which are categorised according to the nature of the chemical reaction that occurs between the sample and the titrant.

Titrations of metal ions with the reagent disodium ethylenediaminetetraacetate are the most important titrations based on complex-formation processes (a salt of edetic acid, or EDTA).

Hence , the answer is that acetic acid is converted into sodium acetate.

Answer:

There is one valence electron in a neutral lithium atom.

Explanation:

The number of valence electrons in a neutral lithium atom is equal to one.

Valence electrons can be described as the electrons filling the outermost shell of an atom while the electrons in the inner shell of an atom are known as core electrons. Lewis structures are used to determine the number of valence electrons and know the types of chemical bonds.

Valence electrons of an atom can be filled in the same or different orbitals and these electrons are responsible for the interaction between atoms and cause the formation of chemical bonds.

Only electrons occupied in the outermost shell can participate in the formation of a bond or a molecule and are responsible for the reactivity of the element.

The number of electrons in the neutral atom of lithium is 3. There is only one electron present on the outermost shell 2s-orbital.

Learn more about valence electrons, here:

brainly.com/question/18612412

#SPJ5

Answer: 30.978

Explanation:

From the equation 2 moles of Fe will result in 3 moles copper

so .325 moles Fe will result in .4875 moles Cu

Cu weights 63.546 gm per mole

.4875 moles * 63.546 gm / mole = 30.978 gm of Cu

Answer:

The answer is C. the child receives half of is genetic information from each parent

Explanation:

hope this helps enjoy

Answer:

This combination can make a buffer

Explanation:

A buffer is defined as an aqueous mixture of a weak acid and its conjugate base, or vice versa.

In the problem, HF is a weak acid, and its conjugate base is F⁻.

When NaOH reacts with HF, F⁻, Na⁺ and H₂O are produced as follows:

NaOH + HF → F⁻ + Na⁺ + H₂O

As there are initially 0.2mol of HF and 0.1mol NaOH, after the reaction you will have:

0.1mol HF and 0.1mol F⁻. As both, the weak acic and the conjugate base are present: