Distilled Water Has A Neutral pH, Which Means It Is Neither Acidic Nor Basic. Therefore, It's Neutral.
what is the molar mass of.
3 moles of iodine, 5 moles of gold, and 2.5 moles of potassium
Answer:
choices?
Explanation:
What is the percent composition (by mass) of MgBr2?
Answer:
13.2% Mg, 86.8% Br
Explanation:
Mg has a molar mass of 24.31g/mol.
Bromine has a molar mass of 79.90 g/mol.
There is one mole of Mg and two moles of Br in the compound:
79.90x2 + 24.31 = 184.11
So the total molar mass of MgBr2 is 184.11.
A percent tells us a part of a whole, so we will divide each part of the mass into the whole mass.
24.31g Mg / 184.11g MgBr2 = .132
159.8g Br / 184.11g MgBr2 = .868
Multiply these decimals by 100 to make them into a percent.
.132 x 100 = 13.2% Mg
.868 x 100 = 86.8% Br
A mixture of four gases exerts a total pressure of 960
mm Hg. Gase A each exert 120 mm Hg. Gas B exerts
50 mm Hg. What pressure is exerted by gas C?
Omitted question:I think you mean Gas A and D each exert 120 mm Hg, if Gas D has a different value , just lug it into he equation as shown below and solve.
Answer:Gas C= 670mmHg
Explanation:
According to Dalton law of partial pressure
The total pressure of a mixture of gases is the sum of the pressures of each gas and can be illustrated as
Pressure total=P1+P2+… +Pn.
Total Pressure = Gas A + Gas B + Gas C + Gas D + Gas...
Now we have
Total Pressure = 120 mm Hg + 50mm Hg + Gas C + 120 mm Hg
960mmHg = 120 mm Hg + 50mm Hg + Gas C + 120 mm Hg
960mmHg =290mmHg +Gas C
Gas C =960mmHg -290mmHg
Gas C= 670mmHg
describe each of the three states of matter (solid, liquid, gas)
Explanation:
In a solid particles are firmly together and are stuck in a regular pattern
in a liquid particles still touch but arent in a fixed pattern
in a gas particles move quickly in all directions
You are melting a chocolate and accidentally have the stove up to high. the chocolate starts to burn on the bottom of your pot. Physical or Chemical Change?
Answer:
it is a chemical change because it can't be change back to it normal position when it gets burnt
If you have 730 moles of a gas at 304 Kelvin in a 4.50 Liter container what
is the pressure of that eas in atmospheres?
Answer:
4046atm
Explanation:
For this question you can use the ideal gas law,
[tex]PV=nRT[/tex]
Where P is pressure, V is volume, n is moles of substance, R is the constant, and T is the temperature.
Because of the units given, R will equal .08026[tex]P=4046 atm[/tex]
Rearrange the equation to solve for pressure:[tex]P=\frac{nRT}{V}[/tex]
Then, plug in the values (I'll be excluding units for simplicity, but they all cancel out for pressure in atm):
[tex]P=\frac{(730)(.08206)(304)}{4.5}[/tex]
This will give you:
[tex]P=4046atm[/tex]
Ohio Achievement Test Coach Science, Grade 5
10. Bob first blows whistle hard. Then he blows the same whistle gently. What
changed when Bob blew the whistle the second time?
POSTTEST
A pitch
B. volume
C. pitch and volume
D. frequency
help please see attached file
Answer:
balanced equation of glucose
6CO2 + 6H2O----------C6H12O6 + 6O2
in the presence of sun light.
This is agree or disagree I need help ASAP!!
Answer:
disagree
sometimes they attract
Explanation:
Answer:
Explanation:
2. Agree
3. Agree
4. Agree
5. agree
6. disagree
If im wrong its because im tired lol
Savvas Realize. Investigation 8 Experiment 1
Answer:
–1065.25 KJ of energy.
Explanation:
From the question given above, the following data were obtained:
4FeO + O₂ —> 2Fe₂O₃ ΔH = –560.66 kJ
From the balanced equation above,
The formation of 2 moles of Fe₂O₃ released –560.66 kJ of energy.
Finally, we shall determine the amount of heat energy released when 3.8 moles of Fe₂O₃ are produced. This can be obtained as follow:
From the balanced equation above,
The formation of 2 moles of Fe₂O₃ released –560.66 kJ of energy.
Therefore, the formation of 3.8 moles of Fe₂O₃ will release
= (3.8 × –560.66)/2 = –1065.25 KJ of energy.
Thus, –1065.25 KJ of energy is released from the reaction.
The following statements were stated by a politician who was paid by the nuclear energy lobby in a debate in favor of nuclear energy:
a. Nuclear energy doesn’t produce a byproduct because the atoms disappear.
b. Nuclear energy produces no polluting gas in its reaction.
c. Nuclear energy does not contribute to global warming.
d. Nuclear energy has low mining and transportation effects on environment.
Which statement is false and should not be used to argue in favor of nuclear energy?
A) Statement A
B) Statement C
C) Statement D
D) Statement B
Answer:
d
Explanation:
the best state ment is d lol
You and a friend are swimming at your grandparent's house one toasty
summer afternoon. You have music playing through the Bluetooth speaker
on the pool deck, but every time you go underwater, you can hear the
noise, but you cannot understand the words of the song. What would
explain this phenomenon? *
Sound waves travel faster in a gas than they do in a liquid, which is why you cannot
understand the words,
Sound waves travel faster in a liquid than a gas, our ears are just not designed to
translate the faster moving waves,
Sound waves cannot travel at all in a liquid, which is why you cannot understand the
words and it's a miracle you can even hear the music at all,
Sound waves travel at the same speed regardless of the medium; your grandfather is
turning the music on and off when you go underwater and the noise you hear is the
song stuck in your head,
Answer:
Sound waves travel faster in a liquid than a gas, our ears are just not designed to translate the faster moving waves.
Explanation:
Sound waves are mechanical waves which travel through vibrating the medium (the "stuff") they're traveling through. This means they actually move faster through materials that are more dense, and will move more quickly through liquid than gas, and a solid than a liquid. However, our ears are adapted to "translating" sound waves in air rather than water, so we don't understand the music well when the waves move through the water.
A similar idea explains why our vision is blurry underwater; light waves travel at a different speed (slower, not faster!) in water and our eyes perceive this change in speed as blurriness.
Biomes are characterized by temperature, precipitation, and the plant and animal communities that live there.
True or false?
Determine the representative particles of
0.075 mol Ti
2.10 mol CO2
Answer:
0.o75 mol Ti = 4.5x10∧22
2.10 mol CO2 = 1.26x10∧24 molecules
hope this helped
A student asks why the ashes from a fire have much lower mass than the wood that was burned. Which of the following is the correct answer to the student's question?
Answer:
It have lower mass because much of the ashes came from the burned wood. (ashes were like little parts of the wood). plus most of the fuel was turned in to fire (light and heat energy) so yeah ash is just the left over.
Explanation:
Based on what you have learned about the units for measuring thermal energy, complete the following passage.
The unit often used in chemistry and physics to measure energy, such as for work or electrical current, is the
. We can also use this unit, as we did in this lab, for measuring
. This is a property that is quantified by the energy needed per
of material to raise the temperature by one
. The unit for this measure is therefore
.
Answer:
1.joule 2.specific heat 3.gram 4.degree Celsius 5.J/g°CExplanation:
I did the lab
Thermal energy is represented in the units joules J. It is the energy needed to raise the temperature by one degree celsius.Per gram this energy is called as specific heat capacity with the unit J/°Cmol.
What is heat capacity?Heat capacity of a substance is the heat energy required to raise the temperature of the substance by one degree celsius.
If the heat capacity is measure per one mole of a substance it is called specific heat capacity. It is an intensive property whereas heat capacity is an extensive property.
The given passage can be completed as follows:
The unit often used in chemistry and physics to measure energy, such as for work or electrical current, is Joule (J). We can also use this unit, as we did in this lab, for measuring heat capacity.
This is a property that is quantified by the energy needed per one gram of material to raise the temperature by one degree celsius.The unit for this measure is therefore J/°Cg.
To find more about heat capacity, refer the link below:
https://brainly.com/question/28921175
#SPJ2
Carbon dioxide and oxygen are both ___ found in the air.
Answer:
gases
Explanation:
Answer:
the Carbondioxed and oxygen are both a gass found in the air
If the football indoors had a volume of 5.33 L at 21degrees celsuis, what is the volume of the football outside where the temp is 10C (temp must be in K) MUST SHOW WORK
Answer:
5.13 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 5.33 L
Initial temperature (T₁) = 21 °C
Final temperature (T₂) = 10 °C
Final volume (V₂) =?
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 21 °C
Initial temperature (T₁) = 21 °C + 273
Initial temperature (T₁) = 294 K
Final temperature (T₂) = 10 °C
Final temperature (T₂) = 10 °C + 273
Final temperature (T₂) = 283 K
Finally, we shall determine the final volume. This can be obtained as follow:
Initial volume (V₁) = 5.33 L
Initial temperature (T₁) = 294 K
Final temperature (T₂) = 283 K
Final volume (V₂) =?
V₁/T₁ = V₂/T₂
5.33 / 294 = V₂ / 283
Cross multiply
294 × V₂ = 5.33 × 283
294 × V₂ = 1508.39
Divide both side by 294
V₂ = 1508.39 / 294
V₂ = 5.13 L
Thus, the new volume of the football is 5.13 L
Convert the following problems:
a 96 kg to g
b 15 cL to kL
c 188 dL to L
d 3600 m to km
e 234 K to °C
f 43 °C to °F
i would really appreciate the help on this, I'm kinda struggling
Answer:
a.) 96000 g
b.) 0.00015 kL
c.) 18.8 L
d.) 36 KM
e.) -39.15 C
f.) 109.4 F
Explanation:
To turn kg to g, multiply the value by 1000
To Turn CL to KL, divide the volume value by 10000
To turn dl to l, divide volume by 10
to turn m to km, multiply meter value by 0.001 or divide by 1000
To convert c to f, multiply the temperature in degrees Celsius by 2, and then add 30
i hope this helps : )
Which of these do NOT show malleability a) Iron
b) Sulfur
c) Copper
d) Aluminum
Answer:Sulfur
Hope this helps!
Explanation:
4. Explain how radioactive isotopes are used to detect health problems.
2.00g of Copper wire was added to 50.0 mL of a 0.050M solution of Silver Nitrate. The reaction
produced solid silver and aqueous copper II Nitrate. The silver precipitate was collected and
dried. It was determined that the mass of the silver precipitate was 0.24 g. Use this information
to determine the theoretical yield, limiting reactant, and percent yield.
Answer:
See explanation
Explanation:
Now, the equation of the reaction is;
Cu(s) + 2AgNO3(aq) --------> Cu(NO3)3 (aq) + 2Ag(s)
Number of moles of silver precipitate = 0.24/108 g/mol= 0.0022 moles
Number of moles of AgNO3 = 50/1000 * 0.050 = 0.0025 Moles
If 2 moles of AgNO3 yields 2 moles of Ag
Then 0.0025 moles of AgNO3 yields 0.0025 * 2/2 = 0.0025 moles of Ag
Number of moles of Cu = 2.00g/63.5 g/mol = 0.03 moles
If 1 mole of Cu yields 2 moles of Ag
0.03 moles of Cu yields 0.03 moles * 2/1 = 0.06 moles of Ag
Hence AgNO3 is the limiting reactant
Theoretical yield of Ag = 0.0025 moles of Ag * 108 = 0.27 g
Actual yield of Ag = 0.24 g
Percent yield = actual yield/theoretical yield * 100
Percent yield = 0.24/0.27 * 100
Percent yield = 88.8%
If 0.0015 moles of NaOH is dissolved in 11 L of water, what is the pH of the
solution?
Answer:
pH = 10.15
Explanation:
NaOH is a strong base so it dissolves completely.
Calculate your [OH-] first by dividing the moles of OH- by the volume.
0.0015 mol OH- / 11 L = 0.00014
Then, calculate the pOH:
pOH = -log[OH-] = -log(0.00014) = 3.85
pOH + pH = 14, so pH = 14 - pOH = 14 - 3.85 = 10.15
Your opinion on chocolate
What is your opinion on chocolate, any kind like white chocolate dark, etc. also what do you think is the bad side of chocolate?
Answer:
Milk Chocolate
Explanation:
Some chocolates contain lots of sugar, but for Dark chocolate its healthy
Answer:
Milk chocolate the bad side of chocolate is getting fat
Explanation:
have u ever tried shreks snickers before?
Density can be dasdied as a
A physical property of matter
B. chemical property of matter
C. physical change
D. chemical change
Answer:
A
Explanation:
physical property of matter
- no chemical reaction involved
- involves the measurements of mass and density
4. The volume of a gas is 2.5 L when the pressure is at standard pressure (101.325 kPa). What is the
volume of the gas if the pressure decreases to 85 kPa and the temperature of the gas if the pressure is constant?
Answer:
18.32L
Explanation:
sana makatulong
Use the Word Correctly in a Sentence
Ion
A student makes observations about a piece of copper. Which
observation describes a chemical property of the copper? (*hint: anything
relating to "measurements" of something is a physical property) *
A. it has a mass of 63.546 grams
B. corrosion occurs when it is exposed to air
C. it has a density of 8.96 g/cm^3
Answer: b
Explanation:
50g of potassium chloride is dissolved in 500 cm3 of water. Calculate the concentration of the solution. Give your answer in g/dm3
All changes in phase (solid-liquid-gas) are
Answer:
States of matter
Explanation:
Three states of matter