Answer:
CO2 is a compound cause there is more then one
A student measures the mass and volume of a
substance and calculates its density as 1.40 g/mL. The
correct, or accepted, value of the density is 1.30 g/mL.
What is the percentage error of the student's
measurement?
Answer:
The answer is 7.69 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual number = 1.30 g/mL
error = 1.40 - 1.30 = 0.1
We have
[tex]p(\%) = \frac{0.1}{1.3} \times 100 \\ = 7.692307...[/tex]
We have the final answer as
7.69 %Hope this helps you
Please help!!!
When 38 g of a metal at 92 °C is added to
43 g of water at 22°C, the temperature of the
water rises to 30°C. What is the specific heat
capacity of the metal? Assume no heat was
lost to the surroundings.
Answer in units of
J/g degrees C
The specific heat capacity of the metal : 0.610 J/g° C
Further explanationThe law of conservation of energy can be applied to heat changes, i.e. the heat received/absorbed is the same as the heat released
Q abs = Q received
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
∆T = T(final temp) - T(initial temp)
mass of metal = 38 g
T initial metal = 92 °C
mass of water = 43 g
T final water = 30 °C
T initial water = 22°C
c water = 4.18 J/g° C
Heat absorbed by water[tex]\tt Q=m.c.\Delta T\\\\Q=43\times 4.18\times (30-22^oC)\\\\Q=1437.92~J[/tex]
the specific heat capacity of the metalQ water = Q metal
[tex]\tt 1437.92=38\times c\times (92-30)\\\\c=0.610~J/g^oC[/tex]
PLS ANSWER!! ASAP!!! 10 POINTS!!
Why are metals in Group 1A so reactive?
A. These metals need one electron to complete their outer shell.
B. These metals need two electrons to complete their outer shell.
C. These metals have one electron in their outer shell.
D. These metals have two electrons in their outer shell.
Answer:
the answer is = a. these materials...
The metals of Group 1A are so reactive because these metals have one electron in their outer shell. Therefore, option (C) is correct.
What are the metals of Group 1A?The elements of Group 1A of the periodic table are also called alkali metals. The seven elements of group 1 A include hydrogen(H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr).
These are low-melting, extremely reactive, glossy metals that oxidize when exposed to air. When dissolved in water, these metals or their oxides produce a basic solution. Because of their high reactivity, alkali metals are instead found as ionic compounds (except hydrogen).
The general electronic configuration of the alkali metals is ns¹. As they lose one electron from their valence shell they acquire the nearest noble gas configuration, therefore they are very reactive.
The alkali metals are all lustrous, soft, and extremely reactive metals at normal temperature and pressure that quickly lose their valence electrons to create cations with charge +1.
Learn more about metals of Group 1A, here:
https://brainly.com/question/27751926
#SPJ2
If a building is anchored into the ground, it
A. was constructed on that particular spot many years ago
B. has water and electrical resources available
C. is built on a solid foundation and unlikely to shift
D. is likely to be damaged due to land subsidence
Please select the best answer from the choices provided
O A
c
B
U
a
D
Answer: C. Is built on a solid foundation and unlikely to shift
Explanation: If a building is anchored into the ground, it is built on a solid foundation and unlikely to shift .
Answer:
C. Is built on a solid foundation and unlikely to shift
Explanation:
Use the rules of significant figures to report the answer to this math question: (454.3 cL x 17.84 dL )/3.1 L =
Answer:
2614.423226
Explanation:
whats the mass number for titanium if it has 27 neutrons?
Answer: 49
Explanation: Mass number is protons + neutrons. So that would be 22 + 27 which gives you 49
Help ASAP plzzzz!!!!!!!!
Answer:
Granite Solid
Milk Liquid
Neon is gas
Wood Is solid
Paper is solid
Helium is Gas
Water is liquid
Air is Gas
Alcohol is liquid
Metal is solid
Nitrogen is gas
Juice is liquid
Oil is liquid
Water Vapor is Gas
Brick is Solid
Propane is Gas
Fabric is solid
Gasoline is Liquid
Explanation:
Hope Dis helped :D :3
Enter the symbol of the element which would have 36 electrons and -3 charge.
Answer:
Arsenic if I understood correctly
Explanation:
Ions can be made by single element or covalently bonded group of elements. The covalently bonded group of elements is called polyatomic ions or polyatomic atoms. Therefore, the element with atomic number 33 and -3 charge is Arsenic.
What is Ions?Any species that contain charge whether it is positive charge or negative charge is called ions. The example of polyatomic ions are sulfate, phosphate, nitrate etc.
Cation is the species that loose electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state. The element with atomic number 33 and -3 charge is Arsenic.
Therefore, the element with atomic number 33 and -3 charge is Arsenic.
To learn more about ions, here:
https://brainly.com/question/13692734
#SPJ2
Calculate the density of helium if a balloon with a capacity of 5.00 L holds 0.890 g.
Answer:
Explanation:
Density is m/V. Also, 1 liter = 1000 [tex]cm^3[/tex]. So, we get 0.890/(5*1000) = [tex]1.78*10^{-4}[/tex] g/cm^3. You can convert this to kg/m^3 as well by multiplying it by 10. Depends which one you want.
The ratio of the mass in grams and volume in cubic meters gives the density. The density of 0.80 gm helium is 1.78 × 10 ⁻⁴ g/cm³.
What is density?Density is the amount or the number of entities that can be contained in an area. It is denoted by ρ and is calculated as,
Given,
Mass = 0.890 gm
Volume = 5000 cm³
ρ = Mass ÷ Volume
= 0.890 ÷ 5000
= 1.78 × 10 ⁻⁴ g/cm³
Therefore, 1.78 × 10 ⁻⁴ g/cm³ is the density of helium.
Learn more about density here:
https://brainly.com/question/1563196
#SPJ2
Write the correct electron configurations for the following:
ments
ions
• Na (atomic # 11)
• Fe (atomic # 26)
• As (atomic # 33)
• F (atomic #9)
• Co (atomic #27)
• Ag (atomic # 47)
• K (atomic # 19)
• Cu (atomic # 29)
• Si (atomic # 14)
Answer:
Ag
Explanation:
atomic 33 because it what what sence
will give brainlliest
Which noble gas is closest to sulfur, S, on the periodic table? What has to happen for a sulfur atom in order to have an electron arrangement similar to the nearest noble gas?
Answer: argon
What must happen to a sulfur atom in order for it to have an electron arrangement similar to that of a noble gas? Answer: The noble gas closest to sulfur is argon. A sulfur atom gains two electrons to have an electron arrangement similar to that of argon.
Explanation:
what is the chemical name of CCI3
Answer:
Trichloromethyl radical
Explanation:
Answer:
trichloromethanide
Hope this helped
Deciding that she was thirsty, Ms. Smith decided to mix up some lemonade using 2 tablespoons of lemonade, and 2 cups of water. What is the solute and solvent?
Explanation:
solute is the substance being dissolved so that is the 2 tablespoons of lemonade and the 2 cups of water is the solvent.
Is burning the glass plate is physical or chemical change?
what is atomic radius
Explanation:
The atomic radius of a chemical element is a measure of the size of its atoms, usually the mean or typical distance from the center of the nucleus to the boundary of the surrounding shells of electrons. Since the boundary is not a well-defined physical entity, there are various non-equivalent definitions of atomic radius. Three widely used definitions of atomic radius are: Van der Waals radius, ionic radius, and covalent radius
The modern synthesis combined the concepts of _______ and evolution.
Answer:
genetics
hope this helps :)
Explanation:
by . Figure the density of the liquid in each beaker: The mass and volume of each liquid have been given in Table 1. Using the formula for density and a calculator, figure the density of each liquid and record it in the density column of Table 1. Round and write your answer out to the nearest hundredth. (This means you will have two numbers after the decimal point.) Don't forget to write the units!!!!!! (Hint: The formula was the answer to #2 on the front page.)
Answer:
Well what are the numbers but ik that it ius 5
Explanation:
After lab, all of Darrel's friends looked at his data and laughed and laughed. They told him that he was 30.8% too low in the boiling point he had just recorded. He had recorded a boiling point of 50o C on his data sheet. What is the correct boiling point of the liquid he was working with in lab?
Answer:
100°
Explanation:
For a boiling point is it always 100°
lonic bonding
10. If two atoms that differ in electronegativity combine by chemical reaction and
share electrons, the bond that joins them will be
(1 Point)
ionic bond
polar covalent
nonpolar covalent
a hydrogen bond
Answer:
polar covalent
Explanation:
If they do not equally share the electron then it is polar and covalent bonds share electrons
Which part of Earth absorbs the most sunlight? brainly
Answer:
the answer is A)Oceans
Explanation:
POSSIE Gallium (Ga) is a soft, silvery metal used primarily in electronic circuits, semiconductors, and light-emitting diodes (LEDs). It is also useful in high-temperature thermometers, barometers, pharmaceuticals, and nuclear medicine tests. Which electron configuration represents the electrons in an atom of gallium at ground state? O1s 2s22p63s23p64524d104p? O 182 2s22p63s23p64s24p1 o 1s 2s22p63s23p64823d104p? O 182 2s22p63s23p64s3
The ground state configuration : 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹
Further explanationElectrons can move the shell up or down by releasing energy or absorbing energy
It can be concluded that there are 2 conditions:
Ground-state is the state of electrons filling the shell with the lowest energy levels.
Excited-state is the state of electrons which occupies a higher energy level
The state of excited electrons can be seen from the presence of electrons which do not fill the shell completely but fill the shell afterward
Gallium (Ga) is a metal located in group 13, p-block and period 4
Atomic number : 31
If we look at the options:
options 1,2 and 3 do not conform to Aufbau principle(Electrons occupy orbitals of the lowest energy level ), because 3d orbitals do not exist and the number of electrons is also not 31
So that the most appropriate electron configuration is:
1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹ = 31 electrons
or we can write : [Ar] 4s² 3d¹⁰ 4p¹
How to separate these pure substance?if it is not possible, please write cannot be separate
Oxgen
Water
Gold
Carbon Dioxide
Carbon
Answer:
Oxgen- cannot be separated
Water - chemical change
Gold - cannot be separated
Carbon Dioxide - chemical change
Carbon - cannot be separated
Explanation:
A pure substance, which can either be an element or a compound, contains only one type of such element or compound. In opposition to a mixture, pure substances cannot be separated by physical means.
- Elements as a pure substance cannot be separated because it contains only one type of atom. However, compounds contain two or more types of atoms, and hence, can only be separated into its individual atoms via chemical means.
In this question, oxygen (O2), Gold (Au) and carbon (C) are all elements and hence cannot be separated. Carbon dioxide (CO2) and water (H2O) are compounds because they contain two different atoms respectively, hence, can be separated into individual atoms.
What was Wegener's continental drift idea?
Answer: In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other.
Explanation: He called this movement continental drift.
why people on earth cannot see the entire shape of the milky way
Answer:
Explanation:
That is because the Milkyway is full of dust and gas, you cannot really see something if it has dust and gas
Answer:
Its too far away to see
Explanation:
You would probably have to be in space
what is the solution to the equation below rounded to the correct number of significant figures? 4700 L - 281.4 = _____ L
Answer:4400
I went over this problem multiple times and I finally found the soultion
The concept of significant figures are mainly used by scientist and engineer to know the significance of digits in a measurement. Therefore, 4400L is the solution to the equation rounded to the correct number of significant figures.
What is significant figures?Significant figures are the figures that indicate the degree of accuracy of a value. It tells about the precision of a value. It gives an idea about the digits that are necessary to indicate the experimental value.
Rules for counting significant figures are:
Number between 1 to 9 is always significant
Zeroes after a number has got no significance
Zeroes before a number has got no significance
Zeroes between number has got significance
4700 L - 281.4 =4400L
Therefore, 4400L is the solution to the equation rounded to the correct number of significant figures.
To learn more about Significant figures, here:
https://brainly.com/question/12656148?
#SPJ2
Name for each compoud
1.CO
2.H2SO4
3CaCO3
4 H202
5NaF
Which pair of symbols represents nuclei with the same number of neutrons?
A. 56 Co and 580
B. 57Co and 58Ni
c. 57Fe and 58 Ni
D. 57Mn and 57Fe
Answer:
B
Explanation:
Mass number = number of neutrons + number of protons
Atomic number is the number of protons in the nucleus.
58Ni : 58 is the number of neutrons + number of protons
atomic number of Ni is 28. Thus, 58 -28 = 30 neutrons
57Co ; 57 is the number of neutrons + number of protons
number of Co is 27. Thus, 57 – 27 = 30 neutrons
Do 2. A student determines that there are 1.3 x 1025 molecules of an unknown
substance in a 968 g sample. Which compound most likely represents this
unknown substance?
CO
CIO
2)
CO2
N203
CLEAR ALL
Answer:
The correct option is;
CO₂
Explanation:
The given information are;
The number of molecules in the substance = 1.3 × 10²⁵
The mass of the substance = 968 g
Therefore, we have;
The number of molecules in one mole of a substance = 6.02 × 10²³
The number of moles present = (1.3 × 10²⁵)/(6.02 × 10²³) ≈ 21.595 moles
Therefore, 968 g = 21.595 moles
1 mole = 968/21.595 = 44.826 g
The mass of one mole of the substance = 44.826 g
Therefore the mass of one mole of the substance is closely related to the mass of one mole of CO₂ which is 44.01 g/mol.
The correct option is CO₂
The calculation is as follows:The number of molecules in one mole of a substance should be = 6.02 × 10²³
And,
The number of moles present is
= (1.3 × 10²⁵)/(6.02 × 10²³)
≈ 21.595 moles
Now
1 mole = 968/21.595 = 44.826 g
The mass of one mole of the substance = 44.826 g
So, the mass of one mole of the substance is closely related to the mass of one mole of CO₂ i.e. 44.01 g/mol.
Learn more: https://brainly.com/question/1504221?referrer=searchResults
Identify the choice that best completes the statement or answers the question.
Banana slugs live on the ground in moist forests of the Pacific Northwest. They consume and
break down a variety of materials, including small dead animals and rotting leaves. Which
term describes banana slugs?
O carnivores
O consumers
O decomposers
O producers
PLEASE HELP!!!
Fill in the blanks: a substance that undergoes a ______ change will always result in something new that has ________ properties than what it started out as. A- physical and different. b- physical and same. C-chemical and different. D chemical and same