Answer:
physical
Explanation:
The zinc (which was already silver) coated the penny. The NaOH dissolved the zinc. (that was what made the water murky) And small pieces of zinc adhered to the penny (coated) It was a physical change because no NEW color was created.
Why are fossil fuels considered to be a nonrenewable resources? Please help
Answer:
They're considered nonrenewable because they take millions of years to develop. They can't be renewed as fast as we're taking them.
When bonds are (broken/formed) there is a positive energy change.
Answer: Hello i am confused are you asking a question?
Explanation:
What is the electronegativity difference between oxygen and fluorine? What type of bond is this?
Answer:
Veja, por exemplo, que os elementos mais eletronegativos são os que estão no canto superior direito da tabela, isto é, o flúor (4,0) e o oxigênio (3,5), e os menos eletronegativos são os que estão no canto inferior esquerdo, que são o frâncio (0,8) e o césio (0,8).
Explanation:
In a solution made of baking soda and water, the baking soda is the?
Answer:
solute
Explanation:
water is the solvent and baking soda is the solute and it dissolve in water to make a solution
A solid has a fixed ___________________ and a fixed ____________
Answer:
Shape and volume
hope this helps
have a good day :)
Explanation:
how to find molar mass
Answer:
Multiply the element's atomic mass by the number of atoms of that element in the compound. This will give you the relative amount that each element contributes to the compound. For hydrogen chloride, HCl, the molar mass of each element is 1.007 grams per mole for hydrogen and 35.453 grams per mole for chlorine.
Which one do I pick?
Answer:
i would go for the 2nd as far as i know they were a big continent and an earthquake separes them all
What is the oxidation state of S in S2032-?
O A. +3
O B. -2
O C. +4
D. +2
Answer: D.) +2
so the oxidation state of sulfur is +2.
Explanation:
2 points
Stu Dent wants to create a salt water solution. He uses 0.614 moles of salt and 182 milliliters of water. What is the molarity of the solution?
Type your answer...
Answer: The molarity of solution is 3.37 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute = 0.614
[tex]V_s[/tex] = volume of solution in ml = 182 ml
Now put all the given values in the formula of molarity, we get
[tex]Molarity=\frac{0.614\times 1000}{182}=3.37M[/tex]
Therefore, the molarity of solution is 3.37 M
Which plate is the South American plate?
Web
D
O A D
B. A
C. B
В
D C
Answer:
C. B
Explanation:
The correct plate is showing n the green color that is of South America and is a major tectonic plate. The plate belongs to the south American continent and forms the southernmost part of the mid-Atlantic ridge. According to the plate movement, it's still moving to the west away from the Atlantic ridges due to the seafloor spreading. Has The plate has an approx area of 43,600,000 km square.Explain why the Cell A (nerve cell) and Cell B (red blood cell) cannot switch jobs
which of the following acts as a catalyst in catalytic converters?
A. Wood
B. Metal
C. Water
D. Gas
Answer:
B. Metal
Explanation:
The catalyst used in the converter is mostly a precious metal such as platinum, palladium and rhodium. Platinum is used as a reduction catalyst and as an oxidation catalyst. Although platinum is a very active catalyst and widely used, it is very expensive and not suitable for all applications.
Hope it helps plz mark brainlist :)
Which characteristics of flower petals help an angiosperm reproduce? (Select all that apply.)
Answer:
attractive smell and bright colours
A tower built of Iron is 500 meter tall. What is the change in height (m) if it is exposed to 25 0 Celsius during summer and at 1.00 Celsius during winter. α iron = 1.2 x 10-5/ Celsius
Answer:
-0.144 m
Explanation:
From the question,
α = Δh/(h₁Δt).................... Equation 1
Where α = coefficient of linear expansivity of iron, Δh = change in height, h₁ = initial height, Δt = change in temperature.
make Δh the subject of the equation
Δh = α(h₁Δt)..................... Equation 2
Given: α = 1.2×10⁻⁵/°C, h₁ = 500 m,
Δt = (t₂-t₁) Where t₂ and t₁ = Final and initial temperature respectively.
Δt = (1-25) = -24 °C
Substitute these values into equation 2
Δh = 1.2×10⁻⁵[500×(-24)]
Δh = 1.2×10⁻⁵(-12000)
Δh = -0.144 m
The balanced equation below shows the products that are formed when butane (C4H10) is combusted.
2C4H10 + 13O2 Right arrow. 8CO2 + 10H2O
What is the mole ratio of butane to carbon dioxide?
2:8
1:5
13:8
13:10
Answer:
2:8
Explanation:
Answer:
2:8
Explanation:
got it right on edge
Which does not show earths past environment?
Please hurry I need this :((
someone help ,, I'll give brainliest lolll .
Answer:
#2
Explanation:
Corrosion is a natural process that converts a refined metal into a more chemically stable form . It is the gradual destruction of materials by chemical
If you get a root canal or any other potentially painful procedure done at the dentist's office, he or she will probably inject your gums with a local anesthetic to "numb the pain." Neurons that trigger pain are called nociceptors. They trigger pain in order to alert the body to potentially dangerous stimuli. Most local anesthetics hinder the activity of all local neurons, not just nociceptors, so pain is not the only sensation that goes away temporarily. Because all feeling is gone, you can end up drooling on yourself without knowing it.
Considering this information about local anesthestics, which of the following statements best demonstrates that science is an ongoing process that changes in response to new information and discoveries?
A. There are a variety of local anesthetics being used today, including lidocaine, prilocaine, and mepivacaine.
B. Sir Charles Sherrington, who discovered nociceptors, wrote a book about the nervous system that helped show its role in allowing organisms to adapt to their environments.
C. Unlike a local anesthetic, a general anesthetic causes a person to lose consciousness rather than sensation in one area.
D. Scientists have discovered a way to use a compound found in hot peppers, capsaicin, along with an anesthetic in order to block nociceptors only.
please help me with n5 ty
and don’t waste my time if you don’t know the answer please
Thanks:)
The melting point of a substance is the same as its _____ point.
evaporation
freezing
boiling
sublimation
PLEASE HELP ASAP!!!! WILL GIVE BRAINLIEST TO CORRECT ANSWER!!
The characteristics of a certain gas are shown below.
Characteristics of a Gas
Characteristic Description
Compound Oxygen gas
Condition STP
Mass 4.8 grams
What is the expected density of the above sample of gas?
A. 1.90 g/L
B. 1.82 g/L
C. 1.56 g/L
D. 1.43 g/L
Answer:
1.56g/L it will be as per my calculation if I am not wrong so
Answer: D: 1.43
The expected density of the given sample of oxygen gas at STP can be calculated using the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
At STP, the pressure is 1 atm and the temperature is 273 K. We are given that the mass of the oxygen gas is 4.8 g. To find the number of moles of oxygen gas, we can use its molar mass, which is 32.00 g/mol:
n = mass / molar mass = 4.8 g / 32.00 g/mol = 0.15 mol
Using the molar volume of an ideal gas at STP, which is 22.4 L/mol, we can find the volume of the oxygen gas:
V = n × molar volume = 0.15 mol × 22.4 L/mol = 3.36 L
Therefore, the expected density of the given sample of oxygen gas at STP is:
density = mass / volume = 4.8 g / 3.36 L = 1.43 g/L
Therefore, the expected density of the given sample of oxygen gas at STP is 1.43 g/L.
someone please help with this
Answer:
a. triple bond
b.diatomic atom
c. covalent bond
d. non polar covalent bond
e. covalent bond
f. sigma bonds
CAn someone help me with this?
Answer:
I think D. sorry if I'm wrong:)
What is the mass of oxygen in 10 grams of water?
Answer:
The answer is 16.00 amu
What is the chemical equation of a covalent bond
Answer:
In my knowledge of chemistry, I believe there isn't chemical equation for covalent bond. There is only covalent formula
Explanation:
An idea is being proposed. The steps that led to the idea are listed below:
There was a review by the scientific community.
The data collected was observable and measurable.
Opinion and values of all social groups were implemented.
Can this idea be scientific?
A. Yes, because the idea was tested empirically.
B. No, because opinions and social values may lead to bias.
C. Yes, because all steps of the scientific method were followed.
D. No, because the scientific community often favors its peers.
Answer:
No because opinion and social values may lead to bias
Explanation:
I'm smart >:)
B. No, because opinions and social values may lead to bias.
if it's wrong correct me but I'm pretty sure that's right!
16.1 g of bromine are mixed with 8.42 g of chlorine to give an actual
yield of 21.1 g of bromine monochloride.
The question is complete, the complete question is;
16.1g of bromine are mixed with 8.42g of chlorite to give an actual yield of 21.1g of bromine monochloride.
Answer:
91 %
Explanation:
Br2 + Cl2 ------>2BrCl
Number of moles of Chlorine = 8.42/71 = 0.119 moles
If 1 mole of Cl2 yields 2 moles of BrCl
0.119 moles of Cl2 will yield 0.119 moles * 2/1 = 0.238 moles of BrCl
Number of moles of Br2 reacted = 16.1/160 = 0.1 moles
If 1 mole of Br2 yielded 2 moles of BrCl
0.1 moles of Br2 yields 0.1 * 2/1 = 0.2 moles of BrCl
Bromine is the limiting reactant.
Mass of BrCl produced = 0.2 moles * 115.357 g/mol = 23.07 g
Theoretical yield = 23.07 g
Actual yield = 21.1 g
Percentage yield = Actual yield/Theoretical yield * 100
= 21.1/23.07 * 100 = 91 %
Can someone please check my answer??!!!
Answer:
I think its correct
Which of the following objects would take you the greatest amount of force to accelerate?
Complete question is;
Which of the following object would take you the greatest amount of force to accelerate.
A) a soccer ball with a mass of 0.5 kg
B) a refrigerator with a mass of 200 kg, C) a bike with a mass of 25 kg
D) a car with a mass of 5,000 kg,
Answer:
D) a car with a mass of 5,000 kg
Explanation:
Formula for force is;
F = ma
Where;
F is force
m is mass
a is acceleration
Now, Force is directly proportional to the acceleration and mass.
Thus, the higher the mass, the greater the force.
Thus, the object that will require the most force is the one that has the highest mass.
Looking at the options, the one with the highest mass is option D.
How has the atom changed since Rutherford’s Early Atomic Model?
Answer:
the atom has changed in many ways, we have found sizes, masses, electrons, neutrons, and more.
Explanation: