The characteristics of the terrestrial planet are:
They are made up of metallic substances with hard surfacesThe orbits of the terrestrial planets rotate more slowly Terrestrial planets also has mountains.What is meant by terrestrial planets?The terrestrial planets can simply be defined as those planets characterized by the presence of metallic substances, mountains or even rocks. However, the major known planets are as follows:
MecuryVenusEarthMars JupitarSaturnUranusNeptunePlutoThat being said, of all these planets listed above, only those ones closest to the sun are regarded to as the terrestrial or inner planets.
The terrestrial or the inner planets are as follows:
MecuryVenusEarthMarsIn conclusion, we can now deduce from all explanation given above that the inner planets are very close to the sun.
Read more on terrestrial planets:
https://brainly.com/question/3406478
#SPJ1
Description/Functions Illuminating/magnifying/mechanical
parts of microscope
The main function of the coarse adjustment knob simply is that it helps to focus an image on the microscope.
What is meant by a microscope?In science, a microscope is an instrument which is used in viewing objects or cells which cannot be be seen with the ordinary eyes. This instrument is also used to view microscopic organisms, cell and tissues.
That being said, the coarse adjustment knob help in focusing an image on the microscope by way of moving the stage up and down and the lens too. Some few parts of microscope aside the coarse adjustment knob are as follows:
ArmStageEyepieceNosepiece Objective lensIn conclusion, it can be deduced from all said and done above that objectives lens and the stage of the microscope helps the coarse adjustment knob to perform its function easily.
Complete question:
Description/Functions Illuminating/magnifying/mechanical parts of microscope.
What is the function of the coarse adjustment knob of a microscope?
Read more on microscopes:
https://brainly.com/question/15744335
#SPJ1
what are the spectator ions int he solution after the complete neutralizaastion reaction occurs when mixing the weak acid h2so34 and the strong base naoh
The neutralization reaction between the weak acid H2S(aq)and the strong base KOH(aq) can be represented using the following total ionic equation.
2H2S+K^+ + 20H^- → 2H2O +2S^2- + K^+
From this equation, we can see that the spectator ion would be the K+ion since it is present in both sides.
Spectator ions exist on both sides of the equation in the same state because they are present during the reaction but are unaffected by it. Every neutralization reaction involves this shift.
Ions present in a reaction solution but not participating in the reaction are known as "spectator ions." As ions, they persist in solution. In this instance, both the hydride H+ and hydroxide OH1 ions from the LiOH and HBr remain in solution.
learn more about neutralization reaction here:
https://brainly.com/question/15095136
#SPJ4
Add curved arrows to the reactant side of the following SN2 reaction to indicate the flow of electrons. Dravw the product species to show the balanced equation, including nonbonding electrons and formal charges Do draw in the leaving group as well as the main organic product, adn show the lone pairs and formal charge on the leaving group.
A graphic showing curved arrows pointing to the catalyst surface of the provided SN2 reaction to represent the passage of electrons cannot be produced since the statement is not complete.
When drawing in the leaving group and the major organic product, as well as showing the lone pairs with formal charges on the leaving group, the product species should be used to demonstrate the balanced equation, nonbonding electrons, and formal charges.
What do lone pairs mean?Lone pairs are those valence electrons in a covalent connection that are not shared with another atom.
One bond is ruptured and another is completed in one step in a chemical reaction known as an SN2 reaction.
To know more about lone pairs visit :
https://brainly.com/question/24174604
#SPJ4
in terms of bonding, simply explain why silicate materials have relatively low densities. (0.5 points)
Silicate material have relatively low densities because of the covalent character in the bonds.
The silicate material have relatively low densities because of the presence of the covalent character between the interatomic bonding of Si and O.
This covalent character decreases the packing efficiency of the lattice of the silicates.
Also, because of the presence of the Frenkle effect in the lattice of silicate materials. It is easily founded in the silicates which result in the relatively low densities.
To know more about silicates, visit,
https://brainly.com/question/4938885
#SPJ4
a gas mixture composed of helium and argon has a density of 0.660 g/l at a 755 mmhg and 298 k. part a what is the composition of the mixture by volume?
The composition of the mixture by volume 62.1% He and 37.9% Ar.
PV = nRT
n = mass / mw
substitute and rearrange...
PV = (mass / mw) RT
mw = (mass / V) RT/P
and since density = mass / V
mw = (0.660g /L) x (0.08206 Latm/moleK) x (298K) / (755mmHg x 1atm/760mmHg)
mw = 17.61 g/mole
mole fraction He x molar mass He + mole fraction Ar x molar mass Ar = 17.61
and if we let χHe = mole fraction He.. then (1-χHe) = mole fraction Ar.. ie.
χHe x 4.003 + (1-χHe) x 39.95 = 17.61
-35.95 χHe = - 22.34
χHe = 0.621
χAr = 1-0.621 = 0.379
now.. what about volume well... if both gases are ideal, then PV= nRT ---> V/n = RT/P.. so at the constant T and P.. V/n = a constant.. ie.. V1/n1 = V2/n2.. ie.. V1/V2 = n1/n2..meaning this...
"volume ratio = mole ratio"
so. VHe / VAr = m0les H2 / m0les Ar.
and since mole fraction He = moles He / moles total and mole fraction Ar = moles Ar / moles total...
therefore..
mole fraction He / mole fraction Ar = [moles He / (moles total)] / [ moles Ar / (moles total)] = nHe / nAr
VHe / VAr = χHe / χAr = 0.621 / 0.379...
or if you prefer...
62.1% He and 37.9% Ar
Learn more about Volume here:
https://brainly.com/question/24189159
#SPJ4
alpha polonium crystallizes in a simple cubic unit cell with an edge length of 336 pm. what is the density of alpha polonium (in g/cm^3)?
Simple cubic structure there is only one lattice point at each corner of the cube-shaped unit cell. Here, particles are present at the corners of the cube and not on the body center or face center.
Alpha polonium is a high radioactive heavy metal.
How to calculate density in simple cubic cell?
We will use the equation,
ρ=Z×Ma/a³×Na
where,
Z = number of atoms in a unit cell (Z = 1 for a simple cubic unit cell)
a = edge length= 336 pm
Na=6.022×1023particles/mol
Ma = 209
ρ=Z×Ma/a³×Na
= 1× 209 / (336) ³× 6.023
= 3.31 ^-5
To know more about simple cubic structure click on https://brainly.com/question/8345500
#SPJ4
in determining how many moles of water are produced by the reaction of 1.50 moles of octane, which conversion factor should be used?
1.5 moles of Octane will react to produce = (1.5 × 18)/2 = 13.5 moles of H2O.
Thus, 13.5 moles of water were obtained from the reaction.
How to solve ?We'll begin by writing the balanced equation for the reaction. This is illustrated below below:
2C8H18 + 25O2 —> 16CO2 + 18H2O
From the balanced equation above,
2 moles C8H18 reacted to produce 18 moles of H2O.
Finally, we shall determine the number of moles of H2O produced by the reaction of 1.5 moles of C8H18. This can be obtained as follow:
From the balanced equation above,
2 moles C8H18 reacted to produce 18 moles of H2O.
Therefore, 1.5 moles of C8H18 will react to produce = (1.5 × 18)/2 = 13.5 moles of H2O.
Thus, 13.5 moles of H2O were obtained from the reaction.
What connection exists between moles of octane and moles of water?If that happens, we know from the balanced equation that for every two moles of octane consumed, we get 18 moles of H2O.
Why balanced equation is important ?The law of conservation of mass, which states that "the total mass of all the products of reaction in a chemical reaction is equal to the total mass of all the reactants," is satisfied by balancing chemical equations.
learn more about balanced equation visit:
https://brainly.com/question/12192253
#SPJ4
convert the following potentials. the ag | agcl and calomel reference electrodes are saturated with kcl. (a) 0.523 v versus s.h.e. ? ? versus ag | agcl (b) ?0.111 v versus ag | agcl ? ? versus s.h.e. (c) ?0.222 v versus s.c.e. ? ? versus s.h.e. (d) 0.023 v versus ag | agcl ? ? versus s.c.e. (e) ?0.023 v versus s.c.e. ? ? versus ag | agcl
The ag | agcl and calomel reference electrodes are saturated with kcl. The answers should be as follows : (a) 0.326 v, (b) 0.086 v, (c) 0.019 v, (d) -0.021 v, (e) 0.021 v.
Chemical reaction known as oxidation. As a result of atoms as well as groups of atoms losing electrons, it is described as a process. The addition or loss of oxygen as well as hydrogen in such a chemical species would be another method to describe oxidation.
(a) 0.523 v versus S.H.E. = ? versus Ag | AgCl
E(measured) = E(ind) - E(red)
= 0.523 - 0.197
= 0.326 v
(b) - 0.111 v versus Ag | AgCl = ? versus S.H.E.
E(measured) = E(ind) - E(red)
0.197 = E(ind) - (-0.111)
E(ind) = 0.197 - 0.111
E(ind) = 0.086 v
(c) -0.222 v versus S.C.E. = ? versus S.H.E.
E(measured) = E(ind) - E(red)
0.241 = E(ind) - (-0.222)
E(ind) = 0.241 - 0.222
E(ind) = 0.0019 v
d) 0.023 v versus Ag | AgCl = ? versus S.C.E.
E(red) = 0.241 - 0.197 = 0.044
E(measured) = E(ind) - E(red)
= 0.023 - 0.044
= -0.021 v
(e) - 0.023 v versus S.C.E. = ? versus Ag | AgCl
E(measured) = E(ind) - E(red)
0.044 = E(ind) - (-0.023)
E(ind) = 0.044 - 0.023
E(ind) = 0.021 v
Hence, The responses are (a) 0.326 v, (b) 0.086 v, (c) 0.019 v, (d) -0.021 v, and (e) 0.021 v.
To learn more about Cell potential, Here :
https://brainly.com/question/16108693
#SPJ4
What is the major organic product obtained from the following sequence of reactions? OH TSCI NaOCH, pyridine 2 1. Identify the order of the alcohol (1, 2, 3) 2. Name the reactant. S-2-pentanol 3. Name the product(s). pent-2-ene 4. Draw the product(s) of the reaction on your file to upload.
1- and 2-pentene are produced via the reaction of pentanol with tscl and pyridine. It's not the booze that matters. Pent-2-chloride (C5H9Cl) is produced by the reactions of pentanol (C5H11OH) with thionyl chloride (TSCA).
What purposes does pentanol serve?Pentanol burns readily and smells like fusel when it is at room temperature. In the production of goods for the home and industry, such as paint, lubricants, fuels, and resins, pentanol is frequently employed as a solvent.
Can pentanol be toxic?Eyes, skin, and respiratory systems are all irritated by the chemical. The material may make you throw up and result in aspiration pneumonitis if you accidentally consume it. On the central nervous system, the chemical could have an impact. Unconsciousness may set in after prolonged high-level exposure.
To know more about Pentanol visit:
https://brainly.com/question/13128647
#SPJ3
Helium atoms do not combine to form he2 molecules, yet he atoms do attract one another weakly through.
Helium atoms do not combine to form he2 molecules, yet he atoms do attract one another weakly through dispersion forces.
The weakest intermolecular force is called the dispersion force. When the electrons in two nearby atoms occupy positions that cause the atoms to temporarily form dipoles, the resulting temporary attractive force is known as the London dispersion force. An induced dipole-induced dipole attraction is another name for this force. The attractive forces known as London forces are what cause nonpolar substances to condense into liquids and to freeze into solids when the temperature is sufficiently lowered.
An atom or molecule can produce an instantaneous (temporary) dipole when its electrons are dispersed asymmetrically around the nucleus due to the electrons' constant motion.
Learn more about dispersion forces here:
https://brainly.com/question/14958417
#SPJ4
Which of the following ionic compounds would be expected to have the highest lattice energy? A) KI B) KBr C) KCl D) KF
The ionic compounds that would be expected to have the highest lattice energy is KF>KCl>KBr>KI.
Lattice energy can be defined as the energy required to convert one mole of an ionic solid into gaseous ionic constituents. Alternatively, it can be defined as the energy that must be supplied to one mole of an ionic crystal in order to separate it into gaseous ions in a vacuum via an endothermic process.
As we increase the ion charge variable, lattice energy generally increases. This means that ions with larger charge values will produce ionic compounds with greater lattice energies. In turn, the ions that are possessing weaker charges decrease the lattice energies of their compounds.
Lattice energy is directly proportional to the charge of the ions and inversely proportional to the size of the ions. Thus lattice energy increases as the size of anion decreases.
Therefore the order here would be KF>KCl>KBr>KI.
To know more about ionic compounds ionic compounds
https://brainly.com/question/9167977
#SPJ4
what is the difference in the d-electron coonfiguration of the metal ion that distinguishes the two sets
Answer:
Many transition metals will have electron configurations slightly different than those predicted by using the Aufbau principle, Pauli exclusion principle and Hund's rule.
For example, using these rules would produce an electron configuration for copper of [Ar] 4s2 3d9. The actual electron configuration for copper will move one electron from the 4s sublevel into the 3d sublevel resulting in [Ar] 4s1 3d10. The copper 1+ ion will have an electron configuration of [Ar] 4s0 3d10 and the copper 2+ ion will have an electron configuration of [Ar] 4s0 3d9. Many other transition elements will show movement of electrons from the highest energy s sublevel into the d sublevel one energy below.
Explanation: here cutie hope it helps ;)
how many moles of gaseous boron trifluoride, bf3, are contained in a 4.3410-l bulb at 788.0 k if the pressure is 1.220 atm? how many grams of bf3?
The total mass of BF3 present is 5.552 g
What do you mean by ideal gas equation?
The Ideal gas law is the equation of state of a hypothetical ideal gas. It is a good approximation to the behaviour of many gases under many conditions, although it has several limitations. The ideal gas equation can be written as.
PV = nRT
Where,
P is the pressure of the ideal gas.
V is the volume of the ideal gas.
n is the amount of ideal gas measured in terms of moles.
R is the universal gas constant.
T is the temperature.
Given situation is ,
( P) Pressure of BF3 gas is 1.220 atm
( V) Volume of BF3 is 4.3410L
( T) Temperature of BF3 is 788.0 K
Now, assuming this as an ideal gas,
Let us apply ideal gas equation,
PV = nRT
n = PV/RT = 1.220 atm * 4.3410L / 0.0821 L atm k-1 mol-1 * 788 K
n = 0.08186 moles of BF3 are present.
Now, we know molar mass of BF3 = 67.82 gmol-1
i.e. total mass of BF3 present = Number of moles * molar mass
= 0.08186 * 67.82g mol-1
= 5.552 g of BF3 is present.
To know more about ideal gas equation from the given link:
https://brainly.com/question/20348074
#SPJ4
a 10.0 ml solution of 0.10 m hcl is titrated with an unknown concentration of naoh solution. complete neutralization and the equivalence point is reached once 20.0 ml of naoh is added. what is the molarity of the naoh?
The molarity of the NaOH is 0.25M.
What is molarity?
The molar concentration or the molarity of the solution is inversely proportional to the dilution. An increased dilution will decrease the molarity of the solution.
What is concentration?
How much solute has been dissolved in the solvent is indicated by the concentration of the solution.
Therefore, molarity of the NaOH is 0.25M.
Learn more about molarity from the given link.
https://brainly.com/question/26528084
#SPJ4
Which gas is most likely to depart from the assumption of the kinetic-molecular theory that says there are no attractive or repulsive forces between molecules?.
SF₆ is the gas, that is most likely to depart from the assumption of the kinetic-molecular theory that says there are no attractive or repulsive forces between molecules.
What is Kinetic- molecular theory?
The assumption that matter is made up of microscopic particles that are always in motion forms the foundation of the kinetic-molecular theory, which explains the states of matter. The observable characteristics and behaviours of solids, liquids, and gases are explained by this theory. The theory specifically pertains to the ideal gas model of a gas. An ideal gas is a hypothetical gas whose behaviour exactly matches all of the kinetic-molecular theory's presumptions.
What are molecules?
The smallest component of a substance possesses both its chemical and physical characteristics. One or more atoms make up molecules. They may have the same atoms or different atoms if they have more than one (a water molecule has two hydrogen atoms and one oxygen atom).
Hence, SF₆ is the gas, that is most likely to depart from the assumption of the kinetic-molecular theory.
To know more about Kinetic-molecular theory, check out:
https://brainly.com/question/134712
#SPJ4
a chemist prepares a solution of calcium sulfate by measuring out 0.53 umol of calcium sulfate into a 350 ml volumetric flask and filling the flask to the mark with water. calculate the concentration in of the chemist's calcium sulfate solution. round your answer to significant digits.
The chemist prepares a solution of calcium sulfate by measuring out 0.53 umol of calcium sulfate into a 350 ml volumetric flask and filling the flask to the mark with water. The concentration of a solution is 1.5 uM.
The concentration or molarity of a solution is defined as the number of moles present in the specific volume of a solution. It is calculated as
Concentration=moles/volume(in L)
The volume of a solution is in mL. Convert the given volume in L
350 ml×(1 L/1000 mL)=0.35 L
Plug the value of moles and volume in the formula
Concentration=0.53 umol/0.35 L
Concentration=1.51429 umol/L
Concentration=1.5 uM (∵M=mol/L)
Therefore, the concentration of a solution is 1.5 uM.
I have answered the question in general as given question is incomplete. The complete question is
a chemist prepares a solution of calcium sulfate by measuring out 0.53 umol of calcium sulfate into a 350 ml volumetric flask and filling the flask to the mark with water. calculate the concentration in uM of the chemist's calcium sulfate solution. round your answer to two significant digits.
To know more about concentrations
https://brainly.com/question/13872902
#SPJ4
The H?X bond length is 105 pm and the H?Y bond length is 119 pm. What is true about the bonding in H?X and H?Y? Select the correct answer below:Question 18 options:There is greater orbital overlap between H and Y than between H and XThere is greater orbital overlap between H and X than between H and YH?Y is a stronger bond than H?XThe H?Y bond energy is greater than the H?X bond energy.
The correct statement here is There is greater orbital overlap between H and X than between H and Y
The atoms combine by colliding with each other. But what does this mean on the atomic level. This situation refers to the process in which the two atoms comes so close to each other that they penetrate each other’s orbital and form a new hybridized orbital where the bonding pair of electrons reside. This hybridized orbital has lower energy than the atomic orbital and hence are stable. It is in the minimum energy state. This partial penetration of the orbital is known as orbital overlap.
The extent of overlap generally depends on the two participating atoms, their size and the valence electrons. In general, the greater the overlap, the stronger the bond formed between the two atoms. Thus, according to the orbital overlap concept, atoms combine by overlapping their orbital and thus forming a lower energy state where their valence electrons with opposite spin, pair up to form covalent bonds.
In the above given case there is greater orbital overlap between H and X than between H and Y. This is because, more the bond length, more the distance between two nuclei and hence lesser the overlap.
To know more about orbital overlap
https://brainly.com/question/15776790
#SPJ4
calculate the percentage of pyridine, c5h5n, that forms pyridinium ion, c5h5nh , in a 0.10 m aqueous pyridine solution.
find the proportion or pyridine, c5h5n, that produces the pyridinium ion [H₃O⁺] = 1.99×10¯¹⁴ M
What is the purpose of pyridine?In addition to being utilized as a solvent, pyridine is also used to create a wide range of goods, including insecticides, paints, synthetic fibres, adhesives, as waterproofing for clothing. In the environment, several natural materials can break down and produce pyridine.
Briefing
We'll begin by writing the balanced dissociation equation of pyridine. This is illustrated below:
C₅H₅N + H₂O <=> C₅H₆N⁺ + OH¯
From the balanced equation above,
1 mole of C₅H₅N produced 1 mole of OH¯.
Therefore, 0.502 M C₅H₅N will also produce 0.502 M OH¯.
Fnally, we shall determine the concentration of hydronium ion, H₃O⁺ inthe solution. This can be obtained as follow:
Concentration of Hydroxide ion [OH¯] = 0.502 M
Concentration of hydronium ion [H₃O⁺] =?
[H₃O⁺] [OH¯] = 1×10¯¹⁴
[H₃O⁺] × 0.502 = 1×10¯¹⁴
Divide both side by 0.502
[H₃O⁺] = 1×10¯¹⁴ / 0.502
[H₃O⁺] = 1.99×10¯¹⁴ M
To know more about pyridine visit:
https://brainly.com/question/16241363
#SPJ4
During the transamination process, the enzyme transaminases uses ________ as a cofactor.
A) Tetrahydrofolate
B) Folate
C) Pyridoxal pyrophosphate
D) Phylloquinone
During the transamination process, the enzyme transaminases use Pyridoxal pyrophosphate as a cofactor.
All transamination reactions, as well as several amino acid oxylation and deamination processes, involve the coenzyme pyridoxal phosphate. The aminotransferase enzyme's epsilon-amino group of a particular lysine group forms a Schiff-base bond with the aldehyde group of pyridoxal phosphate.
The epsilon-amino group of the lysine residue in the active site is replaced by the alpha-amino group of the amino acid substrate. The ensuing intermediate, a quinoid, undergoes deprotonation to become an aldimine, which is then protonated to become a ketimine by accepting a proton in a different position. Ketamine undergoes hydrolysis, leaving the amino group on the protein complex intact.
Know more about Pyridoxal pyrophosphate at:
brainly.com/question/14117818
#SPJ4
assuming that the total pressure of the gases is 1.52 atmatm and that their mole ratio is 94:4.0:1.5:0.50, calculate the partial pressure (in atmospheres) of each gas.
Our mole ratio is 94: 4.0: 1.5: 0.50.
This suggests that there are 94 + 4.0 + 1.5 + 0.50 = 100 moles of natural gas in total.
Consider the formula: partial pressure = mole fraction * total pressure.
In the case of CH4, 94/100 * 1.48 atm = 1.39 atm
C2H6: 4/100 * 1.48 atm = 0.0592 atm
C3H8: 1.5/100 * 1.48 atm = 0.0222 atm
For C4H10, multiply 0.5/100 by 1.48 atm to get 0.0074 atm.
What exactly is a mole fraction?the proportion between the moles with one component in a fluid or other combination and the total moles of all the components.
How is the mole fraction determined?By dividing the total amount of moles of all the elements in a solution by the number of moles within one component in a solution, the molar ratio can be computed. It should be noted that the mole fractions of each component in the solution added up should equal one.
To know more about mole fraction visit :
https://brainly.com/question/8076655
#SPJ4
I understand the question you are looking for is :
Natural gas is a mixture of many substances, primarily CH4, C2H6, C3H8, and C4H10. Assuming that the total pressure of the gases is 1.48 atm and that their mole ratio is 94 : 4.0 : 1.5 : 0.50, calculate the partial pressure in atmospheres of each gas.
a polymerization reaction is a process that joins together monomers to create very long polymer chains, which can be thought of as:
a polymerization reaction is a process that joins together monomers to create very long polymer chains, which can be thought of as chain reaction.
What is polymerization?
Polymerization is any chemical process in which relatively small molecules, known as monomers, combine to form a very big chainlike or network molecule known as a polymer. Monomer molecules might be identical or represent two, three, or more distinct chemicals.
What is chain reaction?
A chain reaction in which a polymer chain grows. progresses solely by reaction(s) between monomer(s) and active site(s) on the polymer chain, with active site(s) regeneration at the end of each growth step.
A typical polymerization reaction consists of three steps: chain start, chain propagation, and chain termination.
To know more about polymerization, check out:
https://brainly.com/question/1602388
#SPJ4
Partial bonding, for example, as part of a resonance hybrid, often results in structures with _____.
Fractional bond orders are frequently produced by partial bonding, such as when it's a component of a resonance hybrid.
Resonance hybrid: what is it?
Resonance structures are collections of two or more Lewis structures, including fractional bonds and fractional charges, that collectively represent the electronic bonding of a single polyatomic species.
Resonance structures can represent delocalized electrons that are not described by a single Lewis formula with an integral number of covalent bonds.
Do resonance hybrids include any partial charges?
A resonance structure must never have any net formal charge. On the other hand, the weighted average of the formal plus partial charges on an atom in each resonance contributor is the net partial charge on that atom.
To know more about resonance hybrid at:
brainly.com/question/17211567
#SPJ4
use the ionic bonding model to determine which has the higher melting point, nacl or mgo . explain your answer.
By using the ionic bonding model, the highest melting point has MgO, due to presence to more ionic charge than NaCl.
Ions having opposing charges electrostatically attract one another to form ionic bonds, sometimes referred to as electrovalent bonds, in a chemical molecule. When the valence (outermost) electrons of one atom are irreversibly transferred to another atom, a bond of this sort is created. If an atom receives electrons, it becomes a negatively charged ion (cation), and if it loses electrons, it becomes a positively charged ion (cation) (anion). Following is a quick discussion on ionic bonds. For further information, go visit Chemical Bonding: The Ionic Bonding Process. The greatest examples of this kind of chemical are those that result from the combination of nonmetals with alkali and alkaline-earth metals. Ionic bonding results in the formation of electrovalent or ionic molecules. genuine polar covalent bond
To know more about ionic bonds visit : https://brainly.com/question/11527546
#SPJ4
a student wants to make a 0.250 m aqueous solution of silver nitrate, agno3, and has a bottle containing 15.89 g of silver nitrate. what should be the final volume of the solution?
The final volume of the solution is 0.21 L.
Given mass divided by molecular mass is used to represent moles.
Hence ,
n = w / m
moles = n
given mass = w
the molecular mass, or m.
Considering the query,
w = 15.89 g
AgNO3's mass value is 169.87 g/mol.
Consequently, the moles can be determined as -
n = w / m
n = 15.89 g / 169.87 g/mol
n = 0.094 mol
Molarity :
The number of moles in a liter of solution is the molarity of a substance.
M = n / V
M = molarity
V i= the solution's volume in liters.
Considering the query,
M = 0.250 M
n = 0.066 mol ( estimated above )
Using the above equation, one may determine the final volume of the solution.
M = n / V
0.250 M = 0.094 mol / V
V = 0.21 L
So, a student wants to make a 0.250 m aqueous solution of silver nitrate, agno3, and has a bottle containing 15.89 g of silver nitrate. The final volume of the solution should be 0.21 L.
To learn more about Silver nitrate, here :
https://brainly.com/question/16992937?referrer=searchResults
#SPJ4
how many equivalent resonance forms can be drawn for so2 without expanding octet on the sulfur atom (sulfur is the central atom)? question 8 options: a) 1 b) 2 c) 0 d) 3 e) 4
b) 2 is the equivalent resonance forms can be drawn for so2 without expanding octet on the sulfur atom.
When the bonding between two polyatomic ions or certain molecules cannot be described by a single Lewis formula, resonance is a means to describe the delocalized electrons inside those molecules or ions. Several resonance structures can be used to depict a molecule or an ion with such delocalized electrons.
To know more about resonance, click here,
brainly.com/question/29298725
#SPJ4
the first excited state of an atom of a gas is 1.85 ev above the ground state. what is the wavelength of radiation for resonance absorption? give your answer in nm.
The wavelength of radiation of resonance absorption is 3.55 x 10⁻⁷ nm. If the first excited state of an atom of a gas is 1.85ev above the ground state.
First, we need to Calculate the frequency of the radiation.
Since the energy of the first excited state is 1.85 eV, we can calculate the frequency of the radiation (ν) using the equation
ν = E/h,
where E is the energy in Joules and h is the Planck's constant (6.626 x 10⁻³⁴ Js).
Therefore,
ν = 1.85 x 1.60 x 10⁻¹⁹J/ (6.626 x 10⁻³⁴ Js)
ν = 2.81 x 10¹⁵ Hz
Next we need to Calculate the wavelength of the radiation.
The wavelength of radiation (λ) is the inverse of the frequency (ν), so
λ = 1/ν.
Therefore,
λ = 1/ (2.81 x 10¹⁵ Hz)
λ = 3.55 x 10⁻¹⁶ m
Lastly, Convert the wavelength from meters to nanometers.
1 m = 10⁹ nm
Therefore, 3.55 x 10^-16 m = 3.55 x 10⁻⁷ nm
The wavelength of radiation for resonance absorption is 3.55 x 10⁻⁷ nm
To know more frequency, click below:
https://brainly.com/question/254161
#SPJ4
Nuclear decay occurs according to first-order kinetics. A nuclide decays in 23. 0 minutes from 12. 9 g to 2. 04 g. What is the rate constant for the nuclide?.
The kinetics of first order governs nuclear decay. A rate constant for a nuclide, which decays from 12.9 g to 2.04 g in 23.0 minutes, is 0.08.
What makes anything nuclear?identifying the root of the problem. The essential elements of a family, commonly their parents and kids, are referred to as the "nuclear family" in this phrase. Nuclear has a long history of metaphorical usage prior to its main association to "nuclear energy," with its meanings including "core" and even more merely "something basic."
Briefing:As far as we are aware, the first order reaction rate is provided by:
kt=2.303*log(R'/R)
We are aware that the following equation determines the rate of a first order reaction:
where k = rate of reaction
t = time = 23 minutes
R = end mass = 2.04 grams,
where R' = beginning mass = 12.9 grams.
We obtain k = 0.08 by plugging these values into the equation above.
i.e., the nuclide's rate constant is 0.08.
To know more about Nuclear visit:
brainly.com/question/18187269
#SPJ4
Combustion of hydrocarbons such as hexane () produces carbon dioxide, a "greenhouse gas. " greenhouse gases in the earth's atmosphere can trap the sun's heat, raising the average temperature of the earth. For this reason there has been a great deal of international discussion about whether to regulate the production of carbon dioxide.
In this reaction we getting carbon dioxide and water as products.
What is combustion?
Fuel (hydrocarbon) and oxygen react chemically during combustion to produce heat. The release of heat and light energy occurs when fuel and oxygen react. Afterward, the flame is produced by heat and light energy.
What is temperature?
The average kinetic energy of all the atoms or molecules in a given substance, which is used to determine its temperature. A substance's particle's kinetic energy varies among its constituent parts. The distribution of the particles' kinetic energy can be used to depict it at any given moment.
Burning of hydrocarbon in the presence of oxygen is called combustion reaction. In this reaction we getting carbon dioxide and water as products.
Therefore, In this reaction we getting carbon dioxide and water as products.
Learn more about Combustion from the given link.
https://brainly.com/question/12172040
#SPJ4
given a 100 gram sample of radioactive cobalt 60, half-life 5.26 years a chemist can predict exactly which cobalt atom is going to decay at any moment 100 grams of cobalt will remain up until the time all the cobalt decays at 5.26 years the cobalt will decay until such time, 5.26 years later, that 50 grams of cobalt remain
5.26 years later, that 50 grams of cobalt remain is the correct prediction that chemist can predict exactly which cobalt atom is going to decay.
A chemical element with the atomic number 27 and the symbol Co is cobalt. With the exception of minor concentrations found in alloys of naturally occurring meteoric iron, cobalt is only ever found in the Earth's crust in a chemically mixed state. Because of its look, hardness, and resistance to oxidation, cobalt is frequently used in electroplating.
Destructive dissolution is what is meant by the words decay, decompose, rot, putrefy, and spoil. The term "decay" refers to a gradual deterioration from a sound or perfect state. a dilapidated home. Decomposition causes a breakdown by chemical transformation and corruption when applied to organic substance. Because objects that are rotting or decaying typically don't look good or smell good, decay seems like an unpleasant process.
learn more about cobalt here
https://brainly.com/question/12831610
#SPJ4
consider the ester (group a) molecules. describe the effect on carbonyl bond strength of adding one, and then two. oxygens.
The effects on carbonyl bond strength of adding one, and then two. oxygens: Both carboxylic acids and esters contain a carbonyl group with a second oxygen atom bonded to the carbon atom in the carbonyl group by a single bond.
The Nucleophile (Nu) attacks the positively charged carbon and pushes one of the double-bond electrons onto oxygen to give it a negative charge.
In organic chemistry, a carbonyl bond is a functional institution composed of a carbon atom double-bonded to an oxygen atom: C=O. it's far commonplace to several instructions of natural compounds, as part of many larger functional groups. A compound containing a carbonyl institution is often called a carbonyl compound.
A carbonyl organization consists of a double bond linking a carbonyl carbon atom and a carbonyl oxygen atom. The carbonyl oxygen atom shares its six valence electrons with the carbonyl carbon atom. Its last 4 valence electrons remain as two sets of electron lone pairs.
Learn more about carbonyl bonds here:
https://brainly.com/question/14859619
#SPJ4