answer:
in heat transfer, as the fluid flows along the tube, the wall layers are heated or cooled. temp. variation occurs in the wall layers.
good luck :)
hopefully, this helps
have a great day !!
Scientists are now able to use the genetic code of organisms to find out more about their evolutionary history. How is this most likely to impact classification
The group of choices associated with the given question are as follows:
Organisms once thought to be unrelated may be found to be related.
Mode of nutrition of some organisms may change.
Organisms that do not have a backbone may develop one.
All multicellular organisms may be found to be prokaryotes
Answer:
The correct answer would be - Organisms once thought to be unrelated may be found to be related
Explanation:
Classification of the organisms is based on the shared characteristics and structural or environmental similarities of the organisms which are modified and evolved during the period of time. It is also known as life sciences evolve and genetic code provides more accurate information.
These evolutionary changes and will lead to certain organisms that are once thought to be unrelated organisms that may actually be related based on a genetic code. These codes have every small and accurate change that occurs and can also find out when these changes occured.
Separation units often use membranes, absorbers, and other devices to reduce the mole fraction of selected constituents in gaseous mixtures. Consider a mixture of hydrocarbons that consists of 62 percent (by volume) methane, 28 percent ethane, and 10 percent propane. After passing through a separator, the mole fraction of the propane is reduced to 1 percent. The mixture pressure before and after the separation is 100 kPa. Determine the change in the partial pressures of all the constituents in the mixture.
Answer:
See explanation
Explanation:
We first obtain the mole fraction of propane at the start and end;
0.01 = x/0.62 + 0.28 + x
0.01[0.62 + 0.28 + x] = x
0.01[0.9 + x] =x
9 * 10^-3 + 0.0.1x = x
9 * 10^-3 = x - 0.0.1x
9 * 10^-3 = 0.99x
x = 9 * 10^-3/0.99
x = 9.09 * 10^-3
After
For methane
0.62/ 0.28 + 0.62 + 9.09 * 10^-3 = 0.68
For ethane
0.28/0.28 + 0.62 + 9.09 * 10^-3 =0.31
Change in partial pressure of methane = (0.68 - 0.62) * 100kPa = 6 kPa
Change in partial pressure of ethane = (0.31 - 0.28) * 100kPa = 3 kPa
Change in partial pressure of propane= (0.01 - 0.1) * 100kPa = -9 kPa
I need help I tried many times and I don’t get it
Answer: ummm what is this cause I don't get it either
Explanation:
i need help with this to lol
What is a characteristic of asexual reproduction?
Answer:
Sexual reproduction
How many kJ are 3,340J?
options:
3,340,000 kJ
334,000 kJ
3.340 kJ
33.40 kJ
Which of the following is a part of the kinetic-molecular theory?
(PLEASE HELP)
Your answer:
Most of the volume of a gas is occupied by gas particles.
The particles of a gas are in constant, random motion.
The average kinetic energy of a gas is dependent upon the identity of the gas.
Gases have indefinite shape and indefinite volume.
Attractive forces between gas molecules must be accounted for with a gas law calculation.
Answer:
2)The particles in a liquid are moving past one another constantly.
3)The particles in gas move freely in all directions.
4)The particles in a solid vibrate in a fixed position.
6)The particles in a gas have few attractions between them.
7)The particles in all states of matter are always moving.
Explanation:
Which statement is true regarding nuclear power plants?
The disposal of radioactive wastes is an intended benefit.
Uranium mining is an intended benefit.
Damage caused to the environment is an unintended consequence.
The creation of large amounts of electricity is an unintended consequence.
but its c because it dealing with power
Explanation:
Carbon dioxide goes into a plant's leaves when it's photosynthesizing is this an example of diffusion or osmosis or neither?
Answer:
diffusion
Explanation:
plants have stomata at the bottom of their leaves. these allow for CO2 to diffuse in and out of the plant.
Methanol, CH3OH, is the simplest of the alcohols. It is synthesized by the reaction of hydrogen and carbon monoxide. Write chemical reactions. If 500 mol of CO and 750 mol of H2 are present, which is the limiting reactant?
Answer:
The limiting reactant is H₂
Explanation:
The reaction of hydrogen (H₂) and carbon monoxide (CO) to produce methanol (CH₃OH) is the following:
2H₂(g) + CO(g) → CH₃OH(g)
From the balanced chemical equation, we can see that 1 mol of CO reacts wIth 2 moles of H₂. So, the stoichiometric ratio is:
2 mol H₂/1 mol CO = 2.0
We have 500 mol of CO and 750 mol of H₂, so we calculate the ratio to establish a comparison:
750 mol H₂/500 mol CO = 1.5
Since 2.0 > 1.5, we have fewer moles of H₂ than are needed to completely react with 500 moles of CO. In fact, we need 1000 moles of H₂ and we have 750 moles. So, the limiting reactant is H₂.
Needing help please help me
Answer:
18. E. 0%
19. D. 25%
Explanation:
Question 18:
Let's use "B" to represent the dominant allele of "light blue skin", and
"b" for recessive "light green skin".
Squidward => BB - light blue skin
Squidward's bride => bb - light green skin
When they cross, they will have the following offsprings:
(BB) × (bb) - Parent
(Bb) (Bb) (Bb) (Bb) - Offspring
All the offspring would be light green skin. The dominant allele of light green skin will express itself over the recessive allele.
Therefore, the chances of Squidward and his bride having light green skin is 0%
Question 19:
Squidward's son => Bb - light blue skin
Squidward's son's bride => Bb - light blue skin
(Bb) × (Bb) - parent
(BB) (Bb) (Bb) (bb) - offspring
They will have the following offspring:
BB and Bb - light blue - 75%
bb - light green - 25%
Chance of having offspring with light green skin is 25%
If you had 3.6 moles of AI(NO3)3, how many grams would you expect to have?
766.7856 g
Molecular weight of Aluminium Nitrate is 212.996 g/mol. 3.6 moles of Aluminium Nitrate is: 212.996 × 3.6 = 766.7856
a moon phase that looks like a full circle is called.
Answer:
a full moon or new moon
Explanation:
What can the period number of an element tell us about that element?
Answer:
All of the elements in a period have the same number of atomic orbitals.
Explanation:
Thread-like structures that are found in the nucleus of a cell that contains all DNA.
A.) DNA
B.) Genes
C.) Chromosomes
D.) Nucleus
can someone help me figure out what the Lewis structure for NCl2−?
Answer:
Chlorine is in group 7A, so it has 7 valence electrons
The Lewis structure for the molecule NCl²⁻ with -2 charge is attached in the image below.
What are Lewis structures?Lewis structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .
They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.
They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.It helps in understanding the bonding between the two atoms.
Learn more about Lewis structures,here:
https://brainly.com/question/20300458
#SPJ5
Concerning the structure of molecules, the biggest factor that affects solubility is
Your answer:
A. polarity
B. tarnish
C. mixiness
Answer:
A
Explanation:
Have a nice day
will gravitational force change based on a change of mass or a change of distance between objects
Answer:
The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.
Which two statements describe what happens to the nuclei of atoms during a fusion reaction? O A. Large nuclei break apart into two or more smaller nuclei. O B. A small amount of mass in the nuclei that combine is converted to energy. O c. Each nucleus formed has fewer protons than each original nucleus had. O D. Nuclei with small masses combine to form nuclei with larger masses.
Answer:
D. Nuclei with small masses combine to form nuclei with larger masses.
B. A small amount of mass in the nuclei that combine is converted to energy
Explanation:
A nuclear fusion, in contrary to fission, is the process by which the nuclei of two atoms combine to form a much larger atom with a large nuclei. Likewise, during a fusion reaction, a large amount of energy is released from the small amount of mass in the nuclei (two) that combines.
According to this question, the following are true of a fusion reaction:
- Nuclei with small masses combine to form nuclei with larger masses.
- A small amount of mass in the nuclei that combine is converted to enormous energy.
A friend tells you that's after a candle burn there is less matter than before the flame was lit is your friend correct explain why or why not
Answer:
See explanation
Explanation:
The law of conservation of matter states that "matter cannot be created or destroyed. In a physical change, substances can change form, but the total mass remains the same."(Virginia)
Hence, the quantity of matter present before and after the candle burn must remain the same in accordance with this law stated above.
Hence, my friend was not correct.
Which change does not increase the speed of reaction between zinc and hydrochloric acid?
By adding the decreasing the temperature, the speed of the reaction will not be increased.
What is speed of the reaction ?The reaction rate, which is a measure of how quickly reactants are consumed as well as products are created, determines the speed of a reaction.
When the temperature is lowered, the molecules move more slowly and collide less. The reaction's speed is slowed as the temperature drops.
Therefore, by adding the decreasing the temperature, the speed of the reaction will not be increased.
To know more about speed of reaction.
https://brainly.com/question/19267538
#SPJ2
write down the formula for B
example:
Hydrogen + Fluorine = Hydrogen Fluorine
help
Answer:
P³⁻ + Cl⁻ --> PCl₃
Explanation:
PCl₃: phosphorus trichloride. prefix in front of chloride is "tri"–meaning three.
Answer:
phosphorus + chlorine = phosphorus trichloride
(He asked for word equation)
In the graphic,
X represents which element?
31
x
15
Answer:
B. X represents phosphorus
Explanation:
In an isotope symbol, you write the mass number above the atomic number. So the 31 represents the mass of the protons and neutrons of the element added together, and the 15 represents the atomic number or the total number of protons in the nucleus.
In a chemical reaction, the reactants (beginning elements or compounds) but have the same number and type of atoms as the products (the new substance created). This is an example of...
a) law of conservation of mass
b) law of conservation of energy
c) covalent bonding
d) product synthesis
Answer:The law of conservation of matter says that matter cannot be created or destroyed. In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products. ... There are two oxygen atoms in the reactants and two atoms of oxygen in the product.
Explanation:
1. Write the word equation for the reaction occurring between lead nitrate and sodium chloride. 2. From your answer in 1 write a balance chemical equation showing all state symbols. 3. Then write the ionic equation for the react ion occurring.
Explanation:
Word Equation
Lead Nitrate + Sodium Chloride --> Lead Chloride + Sodium Nitrate
Balanced Chemical Equation
2 NaCl (aq) + Pb(NO3)2 (aq) → PbCl2 (s) + 2 NaNO3 (aq)
Ionic Equation
In an ionic equation, the aqueous species in the reaction are broken up into ions.
2Na⁺ + 2Cl⁻ + Pb²⁺ + 2NO₃⁻ → PbCl2 (s) + 2Na⁺ + 2NO₃⁻
I can determine the molar mass of an element by looking on the Answer under the atomic mass for the element.
Answer:
YES that is the molar mass can be found as the atomic mass of a single atom, BUT when you get to larger molecules your molar mass will be a combination of atomic masses.
Explanation:
How do the ideas of electrolytes and IV fluids relate?
Answer:
Electrolytes, particularly sodium, help the body maintain normal fluid levels in the fluid compartments because the amount of fluid a compartment contains depends on the amount (concentration) of electrolytes in it. If the electrolyte concentration is high, fluid moves into that compartment (a process called osmosis).
Explanation:
Answer:
Electrolytes are minerals in your body that have an electric charge. They are in your blood, urine, tissues, and other body fluids. Electrolytes are important because they help
Balance the amount of water in your body
Balance your body's acid/base (pH) level
Move nutrients into your cells
Move wastes out of your cells
Make sure that your nerves, muscles, the heart, and the brain work the way they should
Sodium, calcium, potassium, chloride, phosphate, and magnesium are all electrolytes. You get them from the foods you eat and the fluids you drink.
The levels of electrolytes in your body can become too low or too high. This can happen when the amount of water in your body changes. The amount of water that you take in should equal the amount you lose. If something upsets this balance, you may have too little water (dehydration) or too much water (overhydration). Some medicines, vomiting, diarrhea, sweating, and liver or kidney problems can all upset your water balance.
Treatment helps you to manage the imbalance. It also involves identifying and treating what caused the imbalance.
hope it's help you plz mark as brain listBombardier beetles release a burst of hot chemical spray with a popping sound. The chemical is sprayed from a structure present under the belly of the beetles.
Which is the likely advantage of such a behavior?
It allows the beetles to attract mates.
It allows the beetles to move obstacles out of their paths.
It allows the beetles to escape from predators.
It allows the beetles to stay warm in cold conditions.
It allows the beetles to escape from predators
Explore: Arrange the matter
from largest to smallest.
Organ
Molecule
Organelle
. Atom
Organism
. Cells
. Tissues
Elements
Answer:
The levels, from smallest to largest, are: molecule, cell, tissue, organ, organ system, organism, population, community, ecosystem, biosphere.
Explanation:
The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.
Answer:
the matter
from largest to smallest.
- organism-organ-organelle-tissue-cell-atom-elements-molecule
Emma wrote, 'My investigation was good' , as her conclusion.
Philip said this was not a scientific conclusion.
Explain why Emma's conclusion is not scientific
Answer:
Emma's conclusion is not scientific. She is stating an opinion because she thinks her investigation was good which is not necessarily scientific.
What does the prefix “geo” mean?
Please Help
I will give you Brainlist