Answer:
Single displacement reaction.
Explanation:
Hello!!
In this case, since the reaction between silver nitrate and copper metal is:
[tex]2AgNO_3(aq)+Cu(s)\rightarrow 2Ag(s)+Cu(NO_3)_2(aq)[/tex]
As silver was forming silver nitrate, due to the presence of copper, which has the capacity to displace silver out of the salt, we notice the formation of solid silver and a resulting copper (II) nitrate which is blue in aqueous solution.
Therefore, this is a single displacement reaction, because the the lonely copper displaced the silver.
Best regards!
A container holds 3.41×10−3mol of carbon dioxide (CO2). After the addition of 8.41×10−4mol of carbon dioxide, the volume of the container increases to 95.2mL, with the temperature and pressure remaining constant. What was the initial volume of the container?
Answer:
76.366
Explanation:
Knewton answer is 76.4
Answer:
76.4mL
Explanation:
First, calculate the final number of moles of carbon dioxide (n2) in the container.
n2 = n1+n added = 3.41×(10^-3) mol+8.41×(10^-4) mol = 4.25×(10^-3) mol
Rearrange Avogadro's law to solve for V1.
V1 =(V2×n1)/n2
Substitute in the known values for n1, V2, and n2.
V1 = (95.2mL×(3.41×10^-3 mol))/(4.25×(10^-3) mol)=76.4mL
So the initial volume is 76.4mL.
Which statement describes how phase changes can be diagrammed as a substance is heated?
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Answer:
The temperature is on the y-axis and the time is on the x-axis.
Explanation:
Which statement describes how phase changes can be diagrammed as a substance is heated? (D is the answer)
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Which statement describes the appearance of a temperature-vs.-time graph? (C is the answer)
A horizontal line shows that the temperature increases at a constant rate over time.
A vertical line shows that the temperature decreases at a constant rate over time.
Horizontal lines where the temperature is constant during phase changes connect upward-sloping lines where the temperature increases.
Horizontal lines where the temperature increases are connected by upward-sloping lines where the temperature is constant for each phase.
Robert was changing the oil in his truck. He dumped the used oil on the ground in his yard. He didn't know it, but Robert was hurting the environment because the oil-
HELP FAST
Answer:
goes deep into the ground and pollutes the groundwater.
If the net force acting on an object is 0 N, the forces are
Since the forces equal to 0, it's balanced because the object isn't moving.
How do you know your cell's are working
Identify the place which has the highest boiling point of water. Identify the place which has the highest boiling point of water. Denver, Colorado, 5280 feet Death Valley, 282 feet below sea level New Orleans, sea level Mt. Everest, 29035 feet A pressurized passenger jet, 35,000 feet
Answer:
B. because if it was to change so would the amount of wieght that gravity puts on us.
Explanation:
A. might seem right but it's not 35,000 under seal level is the OPPOSITE of 35,000 above sea level.
C. water pressure can change where you are at because of the speed or the type of body of water.
D. it does not make any sense.
hope this helps!!!
How many Stars are In the Milky way Galaxy
Answer:
100 thousand million stars
Explanation:
Answer:
100 to 400 billion stars
which have
different numbers of electrons?
Answer:
These are called isotopes. They have the same number of protons (and electrons), but different numbers of neutrons. Different isotopes of the same element have different masses. Mass is the word for how much substance (or matter) something has.
Exactly 56 grams of iron is mixed with 156 grams of oxygen. The elements are heated and they react. What best describes which remains after the reaction is complete?
Answer:
Explanation:
The chemical expression for the reaction between iron and oxygen is:
4Fe(s) + 3O₂ (g) [tex]\to[/tex] 2Fe₂O₃ (s)
The number of moles of Fe = mass of Fe/ molecular mass of Fe
The number of moles of Fe = 56 g/ 55.845 g/mol
The number of moles of Fe = 1.002 moles of Fe
The number of moles of oxygen = mass of oxygen/ molecular mass of oxygen
The number of moles of oxygen = 156 g /32 g/mol
The number of moles of oxygen = 4.875 moles of oxygen
Assume that Fe is the limiting reactant, the number of Fe₂O₃ can be calculated as:
moles of Fe₂O₃ = 1.002 mole of Fe × 2 moles of Fe₂O₃/ 4 moles of Fe
moles of Fe₂O₃ = 0.501 mole of Fe₂O₃
Assume that O₂ is the limiting factor, the number of Fe₂O₃ is:
moles of Fe₂O₃ = 4.875 moles of O₂ × 2 moles of Fe₂O₃/ 3 moles of O₂
moles of Fe₂O₃ = 3.25 mole of Fe₂O₃
Thus, after the reaction is complete, Fe and O₂ contain different moles of Fe₂O₃. Only Fe gets consumed in the reaction and it is the limiting factor.
How can energy from the Sun be used to heat water? What
things will affect how well the sunlight heats water?
Answer:
Water is heated as it travels through flat, glazed panels known as solar collectors, which are normally situated on the roof of the building. The heated water is then stored in an insulated storage tank.
Which of the following covalent bonds is the most polar (i.e., highest percent ionic character)?
A) Al I
B) Si I
C) Al Cl
D) Si Cl
E) Si P
Answer:
answer d is correct that works
A 13.8 g of zinc is heated to 98.8 c in boiling water and then dropped onto a beaker containing 45.0 g of water at 25.o °C .when the water and metal come to thermal equilibrium the temperature is 27.1°C .what is the specific heat capacity
Answer:
[tex]C_{zinc}=0.400\frac{J}{g\°C}[/tex]
Explanation:
Hello!
In this case, by considering thermodynamics and the temperature of zinc, we can infer it is hot while water is cold, it means that the heat lost by the zinc is gained by the water and we can write:
[tex]Q_{Zn}=-Q_{water}[/tex]
In terms of mass, specific heat and temperatures we can write:
[tex]m_{Zn}C_{Zn}(T_{eq}-T_{Zn})=-m_{water}C_{water}(T_{eq}-T_{water})[/tex]
In such a way, by solving for the specific heat capacity of the zinc we write:
[tex]C_{zinc}=\frac{-m_{water}C_{water}(T_{eq}-T_{water})}{m_{Zn}(T_{eq}-T_{Zn})}[/tex]
Thus, by plugging in the given values we obtain:
[tex]C_{zinc}=\frac{-45.0g*4.184\frac{J}{g\°C}* (27.1\°C-98.8\°C)}{13.8g*(27.1\°C-98.8\°C)}\\\\C_{zinc}=0.400\frac{J}{g\°C}[/tex]
Best regards!
12. When the frequency of a wave increases, what happens to the wavelength?
A. The wavelength is not directly affected by the frequency of a wave
B. The wavelength increases
C. The wavelength decreases
D. More specific information is needed to form a conclusion
Answer:
C. The wavelength decreases
Explanation:
This is because frequency is how often the wave hits the top (peak) and the bottom (through). The more it hits the less wavelength it will have because it is moving faster and has more energy.
Draw the organic product formed when 1−hexyne is treated with H2O, H2SO4, and HgSO4.
Answer:
please find the graph image in the attachment.
Explanation:
The chemical reaction between iron (Fe) and oxygen (O) results in the loss of electrons from iron. This reaction is an example of _____.
A) respiration
B) sublimation
C) oxidation
D) combustion
Answer:
d combustion because iron and oxegen need eachother
Answer:
The Correct answer would be Oxidation.
Explanation:
how fast is a formula 1 car? (For my chemistry project)
Answer:
it's 200 mph fast........
The closer to 7 a substance measures on the pH scale, the ______ the compound fill in the blank
Explanation:
If the PH is greater than 7 then the solution is basicIf the PH is less than 7 then the solution is acidicIf the PH is equal to 7 then the solution is neutralWhich of these mixtures would NOT be separated by using simple distillation?
Ink and water
Salt and water
Sand and water
There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the correct option is option B that is Salt and water.
What is solution?Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.
Salt and water because salt is transparent and will dissolve into the water among given solute, salt NaCl is a polar solute which will dissolve in polar solvent that is water.
Therefore, the correct option is option B that is Salt and water.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ2
Given the following balanced equation, determine the rate of reaction with respect to [Cl2]. If the rate of Cl2 loss is 4.64 × 10-2 M/s, what is the rate of formation of NOCl? 2 NO(g) + Cl2(g) → 2 NOCl(g)
Answer:
[tex]r_{NOCl}=9.28x10^{-2}M[/tex]
Explanation:
Hello!
In this case, given the balanced chemical reaction:
[tex]2 NO(g) + Cl_2(g) \rightarrow 2 NOCl(g)[/tex]
Since there is 1:2 mole ratio between chlorine and NOCl, based on the rate proportions, we can write:
[tex]\frac{1}{-1}r_{Cl_2} =\frac{1}{2}r_{NOCl}[/tex]
It means that for the formation of NOCl, we obtain:
[tex]r_{NOCl}=\frac{2}{-1}r_{Cl_2} \\\\r_{NOCl}=\frac{2}{-1}(-4.64x10^{-2}M)\\\\r_{NOCl}=9.28x10^{-2}M[/tex]
Notice that chlorine is disappearing, which means its rate is negate.
Best regards!
what is the number of each element and the total number of atoms for vinegar?
1. A baseball pitcher won 75% of the games he pitched. If he pitched 43 ballgames, how many games
did he win?
Answer:
He won 32 games.
Explanation:
Another way of expressing 75% is 75/100.
To calculate how many games the baseball pitcher won, we multiply the total of games played (43, in this case) by the percent won:
43 * 75/100 = 32.25 ≅ 32
So the baseball pitcher won 32 games.
what is the mass of 16.6 x 10^23 molecules of barium nitrate
The mass of 16.6 × 10²³ molecules of barium nitrate is 718.7g
The number of moles of a substance can be calculated by dividing the mass by its molar mass. That is;no. of moles = mass(g) ÷ molar mass (g/mol)no. of moles of Ba(NO3)2 = 16.6 × 10²³ ÷ 6.02 × 10²³no. of moles = 2.75 × 10⁰no. of moles = 2.75moles. Molar mass of Ba(NO3)2 = 261.34g/molmass of Ba(NO3)2 = 261.34 × 2.75Mass of Ba(NO3)2 = 718.7gTherefore, the mass of 16.6 × 10²³ molecules of barium nitrate is 718.7g.Learn more at: https://brainly.com/question/15743584?referrer=searchResults
A 2kg metal cylinder is supplied with 1600J of energy to heat it from 5*C to 13*C. What is the SHC of the metal?
Answer:
100Jkg/°C
Explanation:
Given parameters:
Mass of metal = 2kg
Amount of heat energy = 1600J
Initial temperature = 5°C
Final temperature = 13°C
Unknown:
Specific heat capacity of the metal = ?
Solution:
Specific heat capacity of a body is the amount of heat needed to raise the temperature of unit mass of a body by 1°C.
H = m x C x (T₂ - T₁ )
H is the amount of heat
m is the mass
C is the unknown specific heat capacity
T is the temperature
Insert the parameters and solve;
1600 = 2 x C x (13 - 5)
1600 = 16C
C = 100Jkg/°C
A sheet of aluminum measures 55.0 cm by 23.3 cm. If the volume is 2.90 cm^3 what is the thickness of the foil?
Express your answer with the appropriate units.
Answer:
0.0023 cm
Explanation:
The following data were obtained from the question:
Length (L) = 55 cm
Breadth (B) = 23.3 cm
Volume (V) = 2.9 cm³
Thickness (T) =?
Thus, we can obtain the thickness of the aluminum foil as illustrated below:
V = L × B × T
2.9 = 55 × 23.3 × T
2.9 = 1281.5 × T
Divide both side by 1281.5
T = 2.9/1281.5
T = 0.0023 cm
Therefore, the thickness of the aluminum foil is 0.0023 cm
How is zinc chloride formed
Answer:
Explanation:
Zinc chloride, ZnCl2, can be prepared by a direct reaction or by evaporating the aqueous solution formed in various reactions. It is strongly deliquescent (water-absorbing) and is utilized as a drying agent and as a flux.4
plz mark as brainliest
plz help me... my ppr is gonig on......
In first line of Lyman Series, wave number is
1 point
82.26 x 10^5
97.49 x 10^5
109.678 x 10^5
none
Answer:
geruow0irghvn3p0unhie0ghik
Explanation:
A system absorbs 191 kJkJ of heat and the surroundings do 120 kJkJ of work on the system. Part A What is the change in internal energy of the system?
Answer: the change in internal energy of the system is 311 kJ
Explanation:
Given that;
A system absorbs a heat dQ = 191 kJ
And the the surroundings do work on the system dW = 120 kJ
change in internal energy of the system = ?
We take a look at the first law of thermodynamic
Initially the system absorbs energy ( dQ =1 91 kJ) as heat.
Then the surroundings do work (dW = 120kJ) on the system,
Hence the system gains 120 kJ more.
The total energy change is = heat + work
dU = dQ + dW
dU = 191 + 120
dU = 307 kJ
change in internal energy = 311 kJ
Therefore the change in internal energy of the system is 311 kJ
Describe the potential energy of a chemical reaction and how the energy is accessed?
Explanation:
The energy released due to breakage of bond or we can say that protons and electrons go from a structure of higher potential energy to lower potential energy. During this change, potential energy is converted to kinetic energy in form of heat.
Generally chemical potential energy is accessed in form heat, which the difference between the potential energies of reactant and product.
of the element listed wich
has the largest atomic rodius?
Calcium Cas Copper (ca)
Chromium (Cr)
Cobalt (co)
The atomic radius trend on the Periodic Table is as follows:
- Atomic radius increases down a column (or group)
- Atomic radius decreases across rows (or periods) from left to right
Looking at my Periodic Table, calcium, chromium, cobalt and copper are in that order from left to right in the same period, which simplifies things significantly.
Since these elements are in the same period, and given that we know atomic radius decreases across periods from left to right, we can see that calcium has the largest atomic radius.
Find the pH of the equivalence point and the volume(ml) of 0.125M HCl needed to reach the point in titrations of: a) 65.5ml of 0.234M NH3.b) 21.8 mL of 1.11 M CH3NH2.
Answer:
a. 122.6 mL / pH = 4.03
b. 193.6 mL / pH = 5.73
Explanation:
In the equivalence point we know: mmoles acid = mmoles base- And the pH in a titration between a weak base and a strong base, is acid, at the equivalence point. For the volume, we can replace the equation with the data given.
a. 0.125M . volume of acid = 65.5 mL . 0.234M
Volume of acid = (65.5 . 0.234) / 0.125 = 122.6 mL
Total volume at the equivalence point = 188.1 mL
b. 0.125M . volume of acid = 21.8 mL . 1.11 M
Volume of acid = (21.8 . 1.11) / 0.125 = 193.6 mL
Let's calculate the pH. In the equilavence point we have a neutralization reaction.
a. NH₃ + HCl → NH₄Cl
All the mmoles of protons (65.5 mL . 0.234M) react to ammonia, to obtain ammonium.
New concentration is: 15.32 mmoles / 188.1 mL = 0.0814 M
This is the [NH₄⁺] to determine the pH in the acid base equilibrium.
NH₄⁺ + H₂O ⇄ NH₃ + H₃O⁺ Ka
Expression for Ka = [NH₃] . [H₃O⁺] / [NH₄⁺]
5.6×10⁻¹⁰ = x² / (15.32 - x)
(We can avoid the quadratic equation 'cause Ka is so small)
√(5.6×10⁻¹⁰ . 15.32) = x → [H₃O⁺] = 9.26×10⁻⁵
pH = - log [H₃O⁺] → 4.03
b. CH₃NH₂ + HCl → CH₃NH₃Cl
All the mmoles of protons (21.8 mL . 1.11M) react to methylamine, to obtain methylammonium.
New concentration is: 24.2 mmoles / 193.6 mL = 0.125 M
This is the [CH₃NH₃⁺] to determine the pH in the acid base equilibrium.
CH₃NH₃⁺ + H₂O ⇄ CH₃NH₂ + H₃O⁺ Ka
Expression for Ka = [CH₃NH₂] . [H₃O⁺] / [CH₃NH₃⁺]
2.7×10⁻¹¹ = x² / (0.125 - x)
(We can avoid the quadratic equation 'cause Ka is so small)
√(2.7×10⁻¹¹ . 0.125) = x → [H₃O⁺] = 1.84×10⁻⁶
pH = - log [H₃O⁺] → 5.73
The pH of the equivalence point of 0.125M HCl with NH₃ is 4.03 and with CH₃NH₂ is 5.73.
What is equivalence point?In the acid - base titration, at the equivalence point equal moles of acid as well as of base are present.
First we calculate the volume of HCl by using the below equation as:
M₁V₁ = M₂V₂, whereM₁ = molarity of NH₃ = 0.234 M
V₁ = volume of NH₃ = 65.5 mL
M₂ = molarity of HCl = 0.125 M
V₂ = volume of HCl = ?
V₂ = (65.5 . 0.234) / 0.125 = 122.6 mL
Total volume at the equivalence point = 188.1 mL
Chemical reacion will be written as:
NH₃ + HCl → NH₄Cl
All moles of protons react with moles of ammonia, so new moles (n) will be calculated as:
n = molarity × volume
n = 65.5 mL × 0.234M = 15.32 moles
Now, concentration in terms of molarity will be 15.32 mmoles / 188.1 mL = 0.0814 M
pH in the acid-base reaction due to [NH₄⁺], as:
NH₄⁺ + H₂O ⇄ NH₃ + H₃O⁺
Value of Ka for this reaction is = 5.6×10⁻¹⁰
According to the ICE table, Ka equation will be written as-
5.6×10⁻¹⁰ = x² / (15.32 - x)
x = [H₃O⁺] = 9.26 × 10⁻⁵
pH = - log [H₃O⁺] = 4.03
Again we calculate the volume of HCl with the CH₃NH₂ as:0.125M . volume of acid = 21.8 mL . 1.11 M
Volume of acid = (21.8 . 1.11) / 0.125 = 193.6 mL
Total volume at the equivalence point = 215.4 mL
Chemical reacion will be written as:
CH₃NH₂ + HCl → CH₃NH₃Cl
All moles of protons react with moles of ammonia, so new moles (n) will be calculated as:
n = 21.8 mL . 1.11M = 24.2 moles
Now, concentration in terms of molarity will be 24.2 moles / 215.4 mL = 0.11M
pH in the acid-base reaction due to [CH₃NH₃⁺], as:
CH₃NH₃⁺ + H₂O ⇄ CH₃NH₂ + H₃O⁺
Value of Ka = 2.7×10⁻¹¹
According to the ICE table, Ka equation will be written as-
2.7×10⁻¹¹ = x² / (0.11 - x)
x = [H₃O⁺] = 5.4×10⁻⁶
pH = - log [H₃O⁺] = 5.73
Hence the value of pH will be 4.03 and 5.73 respectively.
To know more about equivalence point, visit the below link:
https://brainly.com/question/24584140