In order to use a pipet, place a at the top of the pipet. Use this object to fill the pipet such that the of the liquid is even with the volume line. Release the liquid, touching the tip of the pipet to the side of the container if necessary to release the last drop the pipet tip.

Answer:

C₃H₈(g) + 6 H₂O(g) ⇒ + 10 H₂(g) + 3 CO₂(g)

Explanation:

Propane can be turned into hydrogen by the two-step reforming process.

In the first step, propane and water react to form carbon monoxide and hydrogen. The balanced chemical equation is:

C₃H₈(g) + 3 H₂O(g) ⇒ 3 CO(g) + 7 H₂(g)

In the second step, carbon monoxide and water react to form hydrogen and carbon dioxide. The balanced chemical equation is:

CO(g) + H₂O(g) ⇒ H₂(g) + CO₂(g)

In order to get the net chemical equation for the overall process, we have to multiply the second step by 3 and add it to the first step. Then, we cancel what is repeated.

C₃H₈(g) + 3 H₂O(g) + 3 CO(g) + 3 H₂O(g) ⇒ 3 CO(g) + 7 H₂(g) + 3 H₂(g) + 3 CO₂(g)

C₃H₈(g) + 6 H₂O(g) ⇒ + 10 H₂(g) + 3 CO₂(g)

Answer:

The substance is a mixture

Explanation:

The question lets us know that when solvent X was used as the mobile phase, we obtained only one spot. This may deceive us into thinking that the substance is pure since a pure substance has only one spot on a chromatogram.

However, the same substance yields three spots with solvent Y. This shows that the unknown sample is a mixture of substances and solvent X was unable to fully separate the mixture.

Answer:

Kp = Kc (RT) ^(-2)

Explanation:

For the reaction;

N2 (g) + 3H2 ⇄ 2NH3(g)

We can write;

Kc = [NH3]^2/[N2] [H2]^3

But

Kp = pNH3^2/pN2 . PH2^3

To convert from Kc to Kp

Kp = Kc (RT) ^Δn

where Δn is the change in number of moles going from reactants

to products.

For this reaction;

Δn = 2- (3+1) = -2

Kp = Kc (RT) ^(-2)

Answer:

Car B has more inertia than Car A

Explanation:

Given that,

Mass of car A = 1500 kg

Mass of car B = 2000 kg

Inertia is directly proportional to the mass of an object. Inertia is the measure of the mass of an object.

In this case, the mass of car B is more than that of car A, it means the inertia of car B is more than that of car A.

Hence, the correct option is (c) "Car B has more inertia than Car A".

Answer: soaps are a sodium or potassium salts of long chain fatty acids.when triglycerides in fat/oil react with aqueous NaOH or KOH,they are converted into soap and glycerol.This is called alkaline hydrolysis of esters.Since this reaction leads to formation of soap, it is called the saponification process.

Explanation:

Answer:

All of the above. The CV system transports blood and plasma the do all 4.

Answer:

The answer is 2.4moles of Ag

Explanation:

450.98g Cu(NO3)2/1 x 1mole/187.554g Cu(NO3)2 = 2.4moles Ag

Answer:

Explanation

I am sorry but please give detailed question

Answer:

The expression to calculate the number of moles reactants is:

n = 59.714 J / 368000 J/mole

Explanation:

Note: The question is missing some parts. The complete question is as follows:

A certain chemical reaction releases 368.kJ of heat energy per mole of reactant consumed. Suppose some moles of the reactant are put into a calorimeter (a device for measuring heat flow). It takes 4.09J of heat energy to raise the temperature of this calorimeter by 1°C. Now the reaction is run until all the reactant is gone, and the temperature of the calorimeter is found to rise by 14.6°C. How would you calculate the number of moles of reactant that were consumed?

Set the math up. But don't do any of it. Just leave your answer as a math expression.

Also, be sure your answer includes all the correct unit symbols.

Step 1: Determine the quantity of heat required to raise the temperature of the calorimeter by 14.6°C

Quantity of heat required to raise the temperature of the calorimeter by 1°C = 4.09 J

Quantity of heat required to raise the temperature of the calorimeter by 14.6°C = 4.09 * 14.6 = 59.714 J

Step 2: Express the quantity of heat released per mole of reactant in J/mole

368 kJ/mole = 368 kJ/mole * 1000 J/kJ = 368000 J/mole

Step 3: Express the moles of reactant as n and equate it to the energy absorbed by the calorimeter

Let the number of moles of reactant be n

Assuming that there is no heat lost to the surrounding, from the law of conservation of energy, Heat released = Heat absorbed

Heat released = number of moles of reactant * quantity of heat released per mole of reactant

Heat released = n * 368000 J/mole

Heat absorbed by calorimeter = 59.714 J

From the relation above, n * 368000 J/mole = 59.714 J

n = 59.714 J / 368000 J/mole

Therefore, the expression to calculate the number of moles is n = 59.714 J / 368000 J/mole

Answer:

Where is the map?

Explanation:

Answer:

On the map, Central and South Asia emerge as the areas of the world where earthquakes are more likely to strike, and with greater intensity.

Explanation:

this means that Asia is the most garenteed to get earthquakes rather than many other places

hope this helps

Answer:d

Explanation:Since the earth would be closer to the sun the ozone layer would not be able to handle the more powerful ultra violet rays making the earth to hot.

Answer:

glucose and oxygen gas

Explanation:

[H⁺]=6.696 x 10⁻⁵

pH = 4.174

Given

The concentration of 0.000295 M (2.95 x 10⁻⁴ M) butanoic acid solution

Required

the [H+]  and pH

Solution

Butanoic acid is the carboxylic acid group. Carboxylic acids are weak acids

For weak acid :

[tex]\tt [H^+]=\sqrt{Ka.M}[/tex]

Input the value :

[H⁺]=√1.52 x 10⁻⁵ x 2.95 x 10⁻⁴

[H⁺]=6.696 x 10⁻⁵

pH = - log [H⁺]

pH = - log 6.696 x 10⁻⁵

pH = 5 - log 6.696

pH = 4.174

Answer:

It is D !!

Explanation:

Just did test

Answer:

the lattice constant is 0.270 inches

Explanation:

Given the data in the question;

For FCC lattice;

a = b = c, ∝ = β = α = 90°

from the image below;

AC = 0.19 + 0.19/2 + 0.19/2 + 2(0.001) inch

AC = 0.19 + 0.095 + 0.095 + 0.002

AC = 0.382 inches

Now using Pythagoras theorem

AC² = AB² + BC²

since a = b = c

AC² = a² + a²

(0.382)² = 2a²

2a² = 0.145924

a² = 0.145924 / 2

a² = 0.072962

a = √0.072962

a =  0.27011 ≈ 0.270 inches

Therefore, the lattice constant is 0.270 inches

Answer:

You need to add 0.243g of NaOH to raise the temperature back to 16.2°C

Explanation:

Using the equation:

Q = C*m*ΔT

Where Q is heat

C is specific heat

m is mass

and ΔT is change in temperature

We can find the heat required to increase the temperature of the solution back to 16.2°C:

Assuming specific heat of the solution of water + K2SO4 = Specific heat of water:

C = 4.184J/g°C

m = 1.56g + 6.00g = 7.56g

ΔT = 16.2°C - 7.70°C = 8.50°C

Q = 4.184J/g°C * 7.56g * 8.50°C

Q = 268.86J = 0.269kJ of heat are required

As this heat is obtained from the dissolution of NaOH:

0.269kJ * (1mol NaOH / 44.3kJ) = 0.00607 moles of NaOH are required

In grams -Molar mass NaOH: 40g/mol-:

0.00607 moles NaOH * (40g / mol) =

Answer:

1. 0.097 s

2. 0.420 M

Explanation:

To solve both questions we'll use the formula:

[A]ₓ = [A]₀ - kt

Where [A]ₓ is the concentration of A at a given time; and [A]₀ is the initial concentration.

1) We input the data given by the problem:

0.167 M = 0.700 M - 5.48 M/s * t

And solve for t:

t = 0.097 s

2) We input the new data:

[A]ₓ = 0.500 M - 0.361 M/s * 0.220 s

and solve for [A]ₓ:

[A]ₓ = 0.420 M

Answer:

MgCO₃

Explanation:

From the question given above, we obtained:

MgF₂ + Li₂CO₃ —> __ + 2LiF

The missing part of the equation can be obtained by writing the ionic equation for the reaction between MgF₂ and Li₂CO₃. This is illustrated below:

MgF₂ (aq) —> Mg²⁺ + 2F¯

Li₂CO₃ (aq) —> 2Li⁺ + CO₃²¯

MgF₂ + Li₂CO₃ —>

Mg²⁺ + 2F¯ + 2Li⁺ + CO₃²¯ —> Mg²⁺CO₃²¯ + 2Li⁺F¯

MgF₂ + Li₂CO₃ —> MgCO₃ + 2LiF

Now, we share compare the above equation with the one given in the question above to obtain the missing part. This is illustrated below:

MgF₂ + Li₂CO₃ —> __ + 2LiF

MgF₂ + Li₂CO₃ —> MgCO₃ + 2LiF

Therefore, the missing part of the equation is MgCO₃

Answer:

323.22 ml

Explanation:

Given that :

Diameter, d = 6.8cm

Height, h = 8.9cm

V = arh

Recall :

Volume, V = πr²h

Radius, r = diameter / 2 = 6.8 / 2 = 3.4cm

V = π * 3.4^2 * 8.9

V = 323.21961 cm³

Recall:

1ml = 1cm³

Hence,

323.21961 cm³ = 323.21961 ml

Volume = 323.22 ml

Answer:

4.82 moles of Ag.

Explanation:

We'll begin by calculating the number of mole in 450.98 g of Cu(NO₃)₂. This can be obtained as follow:

Molar mass of Cu(NO₃)₂ = 63.5 + 2[14 + (16×3)]

= 63.5 + 2[14 + 48]

= 63.5 + 2[62]

= 63.5 + 124

= 187.5 g/mol

Mass of Cu(NO₃)₂ = 450.98 g

Mole of Cu(NO₃)₂ =?

Mole = mass /Molar mass

Mole of Cu(NO₃)₂ = 450.98 / 187.5

Mole of Cu(NO₃)₂ = 2.41 moles

Next, we shall determine the number of mole of Cu needed to produce 450.98 g (i.e 2.41 moles) of Cu(NO₃)₂. This can be obtained as follow:

Cu + 2AgNO₃ —> Cu(NO₃)₂ + 2Ag

From the balanced equation above,

1 mole of Cu reacted to produce 1 mole of Cu(NO₃)₂.

Therefore, 2.41 moles of Cu will also react to produce 2.41 moles of Cu(NO₃)₂.

Thus, 2.41 moles of Cu is needed for the reaction.

Finally, we shall determine the number of mole of Ag produced from the reaction. This can be obtained as follow:

From the balanced equation above,

1 mole of Cu reacted to produce 2 moles of Ag.

Therefore, 2.41 moles of Cu will react to produce = 2× 2.41 = 4.82 moles of Ag.

Thus, 4.82 moles of Ag were obtained from the reaction.

Explanation:

Cause the clumps are so compacted together that it is harder to brake apart but the one that are separated are easy cause they do not have all the pressure on them and when they go to add reaction it is faster

Answer:

It uses this term to represent the economic use of land and nature, with minimal degradation and maximum environmental preservation.

Explanation:

Capitalism is an economic system that promotes the maximum economic exploitation of terrestrial resources. It is common for this exploitation to be strongly associated with environmental degradation, destruction of natural habitats, deforestation and death of fauna and flora. With this, we can consider that capitalism is one of the main formulators of environmental degradation, however many professionals have considered the term "capitalism mated with conservation," where terrestrial resources are exploited consciously and with the objective of reducing degradation to the maximum. environmental impact and maximize conservation.

Answer:

Itz 4 and watch the superbowl please.

Explanation:

Answer:

1)40n

2)25n

Explanation:

subtract the numbers if its on the opposite sides and add if its on same side

thank u hope it helps

Answer:

44.45 g of tetrahydrofuran.

Explanation:

From the question given above, the following data were obtained:

Volume of tetrahydrofuran = 50 mL

Density of tetrahydrofuran = 0.889 g/mL

Mass of tetrahydrofuran =?

Density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically, density is expressed as shown below:

Density = mass / volume

With the above formula, we shall determine the mass of tetrahydrofuran needed. This can be obtained as follow:

Volume of tetrahydrofuran = 50 mL

Density of tetrahydrofuran = 0.889 g/mL

Mass of tetrahydrofuran =?

Density = mass / volume

0.889 = mass / 50

Cross multiply

Mass = 0.889 × 50

Mass of tetrahydrofuran = 44.45 g

Therefore, the student should weigh out 44.45 g of tetrahydrofuran.

Answer:

HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O

The coefficients are: 1, 1, 1, 1, 1

Explanation:

_HC₂H₃O₂ + _NaHCO₃ —> _NaC₂H₃O₂ + _CO₂ + _H₂O

To balance an equation, we simply do a head count of the individual elements and ensure they are balanced on both side.

For the above equation, we shall balance it as :

HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O

Reactant:

H = 5

C = 3

O = 5

Na = 1

Product:

H = 5

C = 3

O = 5

Na = 1

From the above, we can see that each element is the same on both side of the equation. Thus the equation is already balanced

HC₂H₃O₂ + NaHCO₃ —> NaC₂H₃O₂ + CO₂ + H₂O

The coefficients are: 1, 1, 1, 1, 1

Answer:

definite volume

Explanation:

Both solids and liquids have a definite volume: The difference is that solids have definite shape while liquids do not -liquids take the shape of their containers-.

Having a definite volume is why liquids cannot be compressed, a property that is used in hydraulic systems.