in c for any element in keyslist with a value smaller than 60, print the corresponding value in itemslist, followed by a comma (no spaces).

Answers

Answer 1

To achieve this in C, you can use a loop to iterate through the elements in the keysList array. For each element with a value smaller than 60, print the corresponding value in itemsList, followed by a comma without spaces:

```c
#include

int main() {
   int keysList[] = {55, 62, 45, 70};
   int itemsList[] = {10, 20, 30, 40};
   int length = sizeof(keysList) / sizeof(keysList[0]);

   for (int i = 0; i < length; i++) {
       if (keysList[i] < 60) {
          printf("%d,", itemsList[i]);
       }
   }

   return 0;
}
```

This code snippet initializes the keysList and itemsList arrays, calculates the length of the arrays, and then iterates through the keysList using a for loop. If an element in keysList is smaller than 60, the corresponding value in itemsList is printed, followed by a comma.

learn more about  itemslist here:

https://brainly.com/question/31348046

#SPJ11


Related Questions

what is the asymptotic running time of the recursive wis algorithm, as a function of the number n of vertices? (choose the strongest correct statement.) o(n) o(n log n) o(n^2) no correct answer

Answers

The asymptotic running time of the recursive Weighted Interval Scheduling (WIS) algorithm depends on its specific implementation. However, in general, the recursive WIS algorithm has a running time of O(n^2), where n represents the number of vertices or intervals.

The recursive WIS algorithm solves the Weighted Interval Scheduling problem by recursively considering all possible choices and selecting the one with the maximum weight. In each recursive step, the algorithm explores all remaining intervals to make a decision. Since there can be up to n intervals at each step, and this process is repeated for each interval, the overall running time is O(n^2). Note that this analysis assumes that the algorithm does not employ any memoization or dynamic programming techniques to avoid redundant computations. If such techniques are utilized, the running time can be significantly improved.

learn more about Weighted Interval Scheduling here:

https://brainly.com/question/14555520

#SPJ11

which of the following best describes the registry in a service-oriented architecture?: a. it is effective for mission-critical systems due to its reliable protocol. b. it is best developed using ucd. c. it must effectively manage exceptions to establish risk exposure. d. it utilizes a c-c-i protocol to interact with service providers. e. none of the above.

Answers

The registry in a service-oriented architecture (SOA) is a component that stores and provides information about available services within the system architecture. It does not relate to any of the options provided.

The registry in a service-oriented architecture is a centralized repository that contains metadata about available services in the system. Its purpose is to facilitate service discovery and enable service consumers to locate and invoke the appropriate services. The registry is not specifically tied to a reliable protocol (option A), nor is it best developed using User-Centered Design (UCD) (option B). It also does not have a direct relationship with managing exceptions or risk exposure (option C). Additionally, there is no mention of a specific protocol like "c-c-i" (option D) that is typically associated with the registry in an SOA. Therefore, the correct answer is E, none of the above.

Learn more about architecture here:

https://brainly.com/question/29649525

#SPJ11

which of the following would not be a part of an organization's it architecture? hardware and software networks database management systems the members of the it staff how it decisions will be made

Answers

The members of the IT staff would not typically be considered a part of an organization's IT architecture.

IT architecture primarily refers to the structure and design of the organization's hardware, software, networks, and databases, as well as the frameworks and guidelines for their integration and operation. It focuses on the technology infrastructure and systems rather than the individuals or staffing decisions.

While the IT staff plays a critical role in implementing and managing the IT architecture, they are not considered a direct component of the architecture itself. The IT staff consists of the individuals who are responsible for the day-to-day operation, maintenance, and support of the IT systems and infrastructure. Their roles and responsibilities may be defined within the IT architecture framework, but they are not part of the architecture itself.

On the other hand, hardware, software, networks, and database management systems are key components of an organization's IT architecture as they form the technical foundation on which the organization's IT systems and operations are built. Additionally, decisions about how IT decisions will be made, such as governance processes or decision-making frameworks, are also important aspects of IT architecture, as they help establish guidelines and procedures for making IT-related decisions within the organization.

To know more about architecture, click here:

https://brainly.com/question/29649525

#SPJ11

In Unix and Linux, conceptually, (nearly) everything is considered to be a file, though there are exceptions to this general rule. Name 5 parts of the Linux system that are presented to the user as a file, and one part of the system that is not. It is helpful for this task to look at the permissions in a directory and to see the types of resources in the directory. Most are labeled with a d for directory or a – for a file. The /dev directory has a couple of different options. The command file will tell you what type of resource a file node is. You can use it on some of these unfamiliar items to help you fill out the other resources that are considered to be files. You will likely have to do external research to figure out what these mean, and it is important that you cite your sources.

Answers

In Unix and Linux systems, many parts are presented to the user as a file. Here are five such parts:

1. Regular files: These are the common files that contain data like text, images, or programs. They are denoted by a "-" in the permissions field.

2. Directories: These are used to organize files in a hierarchical structure. Directories are represented by a "d" in the permissions field.

3. Symbolic links: These are files that act as pointers to other files or directories. Symbolic links have an "l" in the permissions field.

4. Character devices: These are hardware devices that handle data character-by-character, like keyboards and serial ports. They can be found in the /dev directory and have a "c" in the permissions field.

5. Block devices: These are hardware devices that handle data in blocks, such as hard disks and CD-ROM drives. They are also located in the /dev directory and are represented by a "b" in the permissions field.

One part of the system that is not presented as a file is the process table, which contains information about running processes. The process table is managed by the kernel and is not directly accessible as a file.

To determine the type of resource a file node is, you can use the 'file' command, which will provide information about the file type.

Know more about Unix and Linux, here:

https://brainly.com/question/30426419

#SPJ11

true or false: for graphs that happen to be trees, it is possible to generate a shortest paths tree faster than dijkstra's algorithm would generate it. choice 1 of 2:true choice 2 of 2:false

Answers

Choice 2 of 2: False. for graphs that happen to be trees, it is possible to generate a shortest paths tree faster than dijkstra's algorithm would generate it.

Dijkstra's algorithm is an efficient and widely used algorithm for finding the shortest paths in a graph. It guarantees finding the shortest paths from a source node to all other nodes in the graph. In the case of graphs that happen to be trees, Dijkstra's algorithm can still be used to generate the shortest paths tree.

The efficiency of Dijkstra's algorithm is influenced by the number of vertices and edges in the graph, rather than the specific structure of the graph. Therefore, even if the graph is a tree, Dijkstra's algorithm remains an optimal choice for generating the shortest paths tree.

To know more about algorithm , click here:

https://brainly.com/question/21172316

#SPJ11

Hypertext Markup Language (HTML) uses a set of codes called attributes to format documents for display in a browser.
a. True b. False

Answers

The statement given "Hypertext Markup Language (HTML) uses a set of codes called attributes to format documents for display in a browser." is true becasue HTML is a markup language used to create web pages and other online documents.

HTML uses a set of codes called tags to define the structure and content of the document. Attributes are used within tags to specify additional information about the element, such as its color, size, or alignment.

Therefore, the statement "HTML  uses a set of codes called attributes to format documents for display in a browser" is true. Attributes play a crucial role in defining the appearance and behavior of HTML elements, and they are essential for creating visually appealing and interactive web pages.

You can learn more about Hypertext Markup Language (HTML) at

https://brainly.com/question/31784605

#SPJ11

Having multiple class methods of the same name where each method has a different number of or type of parameters is known as
A) encapsulation
B) information hiding
C) tokenizing
D) importing
E) method overloading

Answers

Method overloading is a feature in programming languages that allows multiple methods with the same name but different parameters to coexist, enabling more flexibility in method usage. E) Method overloading.

Method overloading refers to the ability to have multiple methods with the same name within a class, but each method differs in terms of the number or type of parameters it accepts. This allows programmers to create more flexible and versatile code by providing different ways to invoke the same method based on the specific requirements or inputs. The appropriate method is chosen by the compiler or runtime environment based on the arguments provided during the method call.

Learn more about Method overloading here:

https://brainly.com/question/19545428

#SPJ11

write risc-v instructions for placing the following immediate constants in register s0. use a minimum number of instructions. pseudo-instructions are not allowed. a) 0xabcd9bcd b) 0xabcd9235

Answers

The second instruction ORs the lower 16 bits of the constant with register s0 using the ori (OR immediate) instruction. The immediate value used in this instruction is 0x9235 to OR the lower 16 bits with register s0.


To place the immediate constant 0xabcd9bcd in register s0 using RISC-V instructions, we can use the following instructions:

1. lui s0, 0xabcd      # Load the upper 20 bits of the constant into register s0
2. addi s0, s0, -25729 # Add the lower 12 bits of the constant to register s0 (with sign extension)

Explanation:
- The first instruction loads the upper 20 bits of the constant into register s0 using the lui (load upper immediate) instruction. The immediate value used in this instruction is 0xabcd shifted left by 12 bits to occupy the upper 20 bits.
- The second instruction adds the lower 12 bits of the constant to register s0 using the addi (add immediate) instruction. The immediate value used in this instruction is -25729 (which is 0x9bcd with sign extension) to add the lower 12 bits to register s0.

To place the immediate constant 0xabcd9235 in register s0 using RISC-V instructions, we can use the following instructions:

1. lui s0, 0xabcd      # Load the upper 20 bits of the constant into register s0
2. ori s0, s0, 0x9235  # OR the lower 16 bits of the constant with register s0

Explanation:
- The first instruction loads the upper 20 bits of the constant into register s0 using the lui (load upper immediate) instruction. The immediate value used in this instruction is 0xabcd, shifted left by 12 bits to occupy the upper 20 bits.
- The second instruction ORs the lower 16 bits of the constant with register s0 using the ori (OR immediate) instruction. The immediate value used in this instruction is 0x9235 to OR the lower 16 bits with register s0.

To know more about RISC-V instructions visit:-

https://brainly.com/question/22078879

#SPJ11

what is the maximum number of different numbered protocols can the ip header support? (hint look at the protocol field)

Answers

The maximum number of different numbered protocols that the IP header can support is 256.

The Protocol field in the IP header is an 8-bit field that identifies the protocol used in the data portion of the IP packet. This field allows for up to 2^8 (or 256) different protocol values to be assigned, which are used to identify the type of data that is being transmitted in the packet. Some common protocol numbers include 6 for TCP (Transmission Control Protocol), 17 for UDP (User Datagram Protocol), and 1 for ICMP (Internet Control Message Protocol). The Protocol field is used by the receiving device to determine how to handle the incoming data and how to pass it on to the appropriate application or service.

Learn more about protocol link:

https://brainly.com/question/13014114

#SPJ11

In MySQL, a column has a SET type with 16 possible elements. How many bytes does each column value require?a. 1b. 8c. 2

Answers

The SET type in MySQL uses 1 byte to store up to 8 elements, and 2 bytes for up to 16 elements. Therefore, each column value would require 2 bytes.

In MySQL, the SET type is used to store a set of up to 64 distinct values as a single column value. The size of each column value depends on the number of distinct values in the set. If the set has up to 8 distinct values, it requires only 1 byte to store each column value. If the set has between 9 and 16 distinct values, it requires 2 bytes to store each column value. In this case, since the column has a SET type with 16 possible elements, each column value would require 2 bytes of storage. This information is important for database designers and administrators to consider when designing and optimizing database schemas.

Learn more about  MySQL here:

https://brainly.com/question/13267082

#SPJ11

what type of relationship exists between two objects when one object is a specialized version of another object?

Answers

When one object is a specialized version of another object, it is said to have an is-a relationship with the other object. This is also known as inheritance in object-oriented programming.

In this type of relationship, the specialized object is a subtype or a derived class of the other object, which is the supertype or base class. The specialized object inherits all the properties and behaviors of the supertype, but it may also have additional properties or behaviors that are specific to its subtype. For example, a sports car is a specialized version of a car, and it has additional properties and behaviors that are specific to sports cars, such as a high-performance engine, aerodynamic design, and faster speed. Therefore, we can say that a sports car "is a" car, but a car is not necessarily a sports car.

Learn more about specialized version here:

https://brainly.com/question/31854659

#SPJ11

What two names are given to UDP blocks of communication?

Answers

The two names given to UDP blocks of communication are datagrams and packets.

Datagram refers to a self-contained unit of data that is transmitted over a network and contains all the necessary information for its delivery, including source and destination addresses. It is a fundamental component of the User Datagram Protocol (UDP) that provides an unreliable, connectionless service for transmitting datagrams between network hosts.

A packet, on the other hand, is a similar unit of data that is used in various network protocols, including UDP and TCP (Transmission Control Protocol). A packet contains not only the data to be transmitted but also additional information such as header information, error detection codes, and other control information necessary for its successful transmission and reception. Unlike datagrams, packets can be guaranteed to arrive at their destination, as they are transmitted using connection-oriented protocols like TCP that ensure their reliable delivery.

In summary, datagrams and packets are both essential units of data used in network communication, with datagrams being used in connectionless, unreliable protocols like UDP, and packets being used in connection-oriented protocols like TCP. Understanding the differences between these terms is crucial for network engineers and administrators to effectively manage and troubleshoot network issues.

know more about User Datagram Protocol here:

https://brainly.com/question/20038618

#SPJ11

which annotation option is not offered in tableau?

Answers

The correct answer is Tableau offers several annot options, including:

Text annotationsHighlight annotationsMark annotationsImage annotationsWeb page annotationsIt is possible that Tableau may not offer some advanced annotation options, but without more specific information about your version and use case, it is difficult to provide a definitive answer. If you could provide more details about what specific annotation option you are looking for or what you would like to accomplish, I may be able to provide a more specific answer.

To learn more about annot click the link below:

brainly.com/question/29105991

#SPJ11

what is returned by system.in.read() when data is no longer available?a.-1b.any negative valuec.eofd.\0x

Answers

What is returned by system.in.read() when data is no longer available. The correct answer is a. -1.

When data is no longer available to be read, the System.in.read() method in Java returns -1. This value indicates the end of the stream or file, commonly referred to as the end-of-file (EOF) condition. It signifies that there are no more bytes or characters to be read from the input source. The returned -1 value allows the program to detect the end of input and handle it accordingly.

In Java, the System.in.read() method is used to read input from the standard input stream, which is typically connected to the keyboard. It reads a single byte of input data and returns it as an integer value. If there is no more input available, such as when the end of the input stream is reached or when the input stream is closed, the System.in.read() method returns -1 to indicate the end of file (EOF) or end of stream.

To know more about Java , click here:

https://brainly.com/question/12978370?

#SPJ11

vwhat is the term used to refer to files that have been manipulated in order to conceal the contents of the original file?

Answers

The term that is used to refer to files that have been manipulated in order to conceal the contents of the original file is Hidden files.

What is Hidden files?

A hidden folder (or hidden directory) is a folder or file that is not automatically displayed by file system tools when displaying a directory listing.

Any file with the hidden property enabled is a hidden file. in case whereby one is navigating through folders, a file or folder with this property toggled on is hidden one would not be able to see any of them without expressly permitting all of them to be shown.

Learn more about Hidden files at:

https://brainly.com/question/3682037

#SPJ1

a statechart diagram is created for: a. an activity on an activity diagram. b. a single class. c. a single use case. d. a group of classes connected with relationships.

Answers

A statechart diagram is created for a single class.

Statechart diagrams, also known as state machine diagrams, are used to model the dynamic behavior of an individual class in object-oriented systems. They represent the various states that an object can be in and the transitions between those states based on events or conditions. By visualizing the states and state transitions of a single class, statechart diagrams help to depict how the object's behavior changes over time. This includes capturing events, actions, and conditions associated with each state transition. While other diagram types like activity diagrams, class diagrams, and use case diagrams have their own purposes, statechart diagrams specifically focus on modeling the behavior of an individual class.

Learn more about Statechart diagrams here:

https://brainly.com/question/29851104

#SPJ11

Question: In the Ultimate Fighting Championship (UFC), there are two types of professional wrestlers: "good guys" and "bad guys". Between any pair of professional wrestlers there may or may not be a rivalry. Suppose we have n professional wrestlers, and we have a list of r pairs of wrestlers for which there are rivalries. You are hired at UFC to find an O(n + r) time algorithm that determines whether it is possible to designate some of the wrestlers as good guys and the reminders as bad guys such that each rivalry is between a good guy and a bad guy. If it is possible to perform such a designation, your algorithms should produce it.

Answers

The case above can be done via the use of diagram coloring algorithm. First, we form an undirected diagram where each professional wrestler.

What is the algorithm  about?

So one need to use graph coloring algorithm to solve problem. Create undirected graph with wrestlers as nodes. Add edges between rival pairs, then color nodes with two colors to ensure no adjacent nodes have the same color. Label wrestlers as "good" or "bad" using a basic algorithm. We start by coloring a node and its neighbors as "good" and "bad" respectively.

We continue coloring all uncolored nodes using this process until all nodes are colored or a conflict occurs. If no conflicts, output color as valid "good guys" and "bad guys" designations; if conflicts, no possible designation. Time complexity is O(n + r). Graph construction takes O(r) time and node coloring takes O(1) time. Time complexity: O(n + r).

Learn more about  algorithm   from

https://brainly.com/question/24953880

#SPJ1

In the procedure Mystery written below, the parameter number is a positive integer greater
than 1
PROCEDURE Mystery (number)
REPEAT UNTIL (number ¿ 100)
number - number * number
1
IF (number = 100)
RETURN (true)
ELSE
RETURN (false)
Which of the following best describes the result of running the Mystery procedure? (A) The procedure returns true when the initial value of number is less than 100, and
otherwise, it returns false (B) The procedure returns true when the initial value of number is 10, and otherwise, it returns
false (C) The procedure returns true when the initial value of number is 100, and otherwise, it
returns false (D) The procedure returns true when the initial value of number is either 10 or 100, and
otherwise, it returns false

Answers

In the procedure Mystery written below, the parameter number is a positive integer greater than 1
PROCEDURE Mystery (number)
REPEAT UNTIL (number ¿ 100)
number - number * number
1
IF (number = 100)
RETURN (true)
ELSE
RETURN (false)
The result of running the Mystery procedure can be best described as The procedure returns true when the initial value of number is 10, and otherwise, it returns false. So option B is correct.


Here's a step-by-step explanation:

The procedure repeats until number is greater or equal to 100. In each iteration, the number is updated to be number - number * number, which is actually "number = number - (number * number)". If the initial value of the number is 10, then the first iteration will result in number = 10 - (10 * 10) = 10 - 100 = -90, which is less than 100. In the next iteration, number = -90 - (-90 * -90) = -90 - 8100 = -8190, which is now greater than 100, so the loop stops.

Since the number equals 100, the procedure returns true.
For any other initial value, the procedure will not return true because the number will never be equal to 100.Therefore option B  is correct.

To learn more about iteration visit: https://brainly.com/question/31160193

#SPJ11

the best way to apply page setup options to multiple worksheets is to

Answers

The best way to apply page setup options to multiple worksheets is to:

1. Select all the worksheets to which you want to apply the page setup options. You can do this by clicking on the first sheet tab, then holding the "Ctrl" key (or "Shift" key for continuous selection), and clicking on the other sheet tabs you want to modify.
2. Once you have selected multiple worksheets, go to the "Page Layout" tab in the toolbar.
3. In the "Page Setup" group, you can now adjust the various options such as margins, orientation, size, print area, breaks, and more. These changes will be applied to all the selected worksheets.
4. When done, click on a single worksheet tab to deselect the multiple selections.

Learn more about Page setup here:https://brainly.com/question/29577990.

#SPJ11      

       

complete the sentences to describe the steps for customizing the quick access toolbar. click the file tab, then click . next, click . select the desired command, then click . finally, click ok.

Answers

To customize the Quick Access Toolbar, you need to first click the File tab in your application. Then, click Options. Next, click Quick Access Toolbar. From there, select the desired command that you would like to add or remove from the toolbar, and then click Add or Remove accordingly. Finally, click OK to save your changes.

On-screen icons can be used on a graphical control element known as the toolbar, which is also known as a bar or standard toolbar. Most of the time, a toolbar lets you quickly access functions that are used a lot in the program. Open a file, save, and change the font are just a few examples of functions that a toolbar might have.

The toolbar, likewise called a bar or standard toolbar (initially known as lace) is a graphical control component on which on-screen symbols can be utilized. Most of the time, a toolbar lets you quickly access functions that are used a lot in the program.

Know more about Toolbar, here:

https://brainly.com/question/31553300

#SPJ11

under protected inheritance what will properties/methods visibility be in the child class? public : [ select ] protected : [ select ] private : [ select ]

Answers

Under protected inheritance, the properties and methods of the parent class will have a protected visibility in the child class. This means that the child class can access and use these properties and methods within its own code, but they will not be visible or accessible outside of the class or any of its derived classes. Protected inheritance is a type of inheritance in which the public and protected members of the parent class become protected members of the child class, while the private members remain inaccessible.

In protected inheritance, the public and protected members of the base class become protected members in the derived class. This means that the child class can access the protected members of the base class directly, but they are not accessible outside the class or in derived classes further down the inheritance hierarchy. The public members of the base class, on the other hand, remain protected in the derived class.

To summarize, the protected members of the base class are accessible within the child class itself and any derived classes that inherit from it. However, they are not accessible outside the class hierarchy.

Learn more about protected inheritance click here:

brainly.in/question/35746452

#SPJ11

What would be the correct line of code needed to create a JTextField of size 8 that is called StartTextField?JTextField StartTextField = new JTextField(8)JTextField StartTextField = JTextField(8)StartTextField = new JTextField(size =8)JTextField StartTextField = new JTextField(8/8)

Answers

The correct line of code in this case is "JTextField StartTextField = new JTextField(8);" (Option A)

What is a line of code?

Source lines of code, often known as lines of code, is a software metric that counts the number of lines in the text of a computer program's source code to determine the size of the program.

Inline code is any code that is added into the body of a program. Any form of code written in any programming language is acceptable. The inline code runs independently and is generally executed by the primary program under certain conditions.

Learn more about code at:

https://brainly.com/question/14461424

#SPJ1

Select all that apply. In the pseudocode of the textbook, which of the following are string functions? stringToReal toUpper isInteger isDigit substring isUpper

Answers

In the pseudocode of the textbook, the following are string functions: toUpper, substring, and isUpper.

The toUpper function converts all letters in a string to uppercase, the substring function extracts a portion of a string, and the isUpper function checks if all characters in a string are uppercase. The stringToReal function is a conversion function that converts a string to a real number, and the isDigit and isInteger functions are also not string functions but rather functions that check if a character is a digit or if a number is an integer, respectively.

learn more about pseudocode here:

https://brainly.com/question/13208346

#SPJ11

TRUE OR FALSE the costs of technology are usually high for developers and early adopters but then decrease slowly after introduction.

Answers

TRUE. The costs of technology are often high for developers and early adopters, but they tend to decrease gradually over time. This is due to several factors, including increased competition, economies of scale, and improvements in manufacturing processes.

When a new technology is first introduced, it is often expensive to produce because there is a limited market for it and the cost of development and research needs to be recouped. Developers and early adopters are usually willing to pay a premium for the latest and greatest technology, which also contributes to the high costs. However, as the technology becomes more widespread, economies of scale come into play. Manufacturing processes become more efficient, and the cost of production decreases. In addition, as more competitors enter the market, prices are driven down further.

As a result, the cost of technology usually decreases over time, making it more accessible to a broader range of consumers. This is often seen with consumer electronics, such as smartphones and laptops, where the latest models are initially expensive but become more affordable as newer models are released. In conclusion, while the costs of technology can be high for developers and early adopters, they usually decrease gradually over time, making the technology more accessible to the general public.

Learn more about manufacturing processes here-

https://brainly.com/question/31798462

#SPJ11

suppose an organization owns the block of addresses of the form 129.17.129.96/27. suppose it wants to create four ip subnets from this block, with each block having the same number of ip addresses. what are the prefixes (of form xxx.xxx.xxx/y) for the four ip subnets

Answers

The network portion of the address in the block of addresses 129.17.129.96/27 is allocated 27 bits



the host portion is allocated 5 bits. This gives the network a total of 25 = 32 potential host addresses.The host portion of the address must be divided into two bits (22 = four) in order to divide the block into four IP subnets. As a result, we can make four subnets with a total of eight host addresses (23 - 2 = six useable addresses per subnet, minus two for the network and broadcast addresses).Since we are borrowing 2 bits, which have 4 potential values, we must multiply the third octet of the network address by multiples of 4 in order to determine the prefixes for the four subnets .The four subnets' prefixes are:Network addresses 129.17.129.96/30 (from 129.17.129.99 to 129.17.129.99), 129.17.129.100/30 (from 129.17.129.100 to 129.17.129.103), 129.17.129.104/30 (from 129.17.129.104 to 129.17.129.107), and 129.17.129.10The 22 = 4 IP addresses that each subnet has as a result, but only There are 22 - 2 IP addresses that can be used for hosts. The network address is the initial address in each subnet, while the broadcast address is the last address in each subnet.

learn more about network here:

https://brainly.com/question/31228211

#SPJ4

using the waterfall methodology, at what stage of the sdlc are internal control settings determined? group of answer choices initiation design testing planning

Answers

According to the waterfall methodology, internal control settings are determined during the planning stage of the software development life cycle (SDLC). During this stage, the project team determines project goals, objectives, tasks, and resource requirements.

Additionally, they develop a project plan, which includes the definition of the project scope, schedule, budget, and risk management plan. As part of the planning stage, the project team also identifies internal controls that are needed to ensure the security, integrity, and availability of the software application. These controls can include access controls, data encryption, audit trails, and other security measures that help to mitigate the risks associated with software development and deployment.

To learn more about methodology
https://brainly.com/question/30689545
#SPJ11

he implements the algorithm in an app, and users soon ask for the ability to compute the total calories for multiple sessions of walking or running. what structure must be added to the original algorithm so that it can compute the total across multiple sessions?

Answers

To compute the total calories for multiple sessions of walking or running, the original algorithm needs to be updated to keep track of the total calories across all sessions.


One way to achieve this is to add a new variable to the algorithm that will keep track of the total calories burned.Here's an example of how the algorithm could be modified to keep track of the total calories across multiple sessions:Initialize a variable called "total_calories" to 0.For each session of walking or running: Calculate the calories burned for the session using the original algorithm.Add the calorie count to the "total_calories" variable.Return the value of "total_calories".By adding the "total_calories" variable, the algorithm can keep track of the total number of calories burned across all sessions. This variable will be updated each time the algorithm calculates the calories burned for a new session, ensuring that the total count is accurate.


learn more about  compute :

https://brainly.com/question/13027206

#SPJ4

in the detailed key negotiation protocol detailed in the reading, alice specifies a requested minimum prime p of 3 bits. what are the smallest and largest prime numbers that pass her size test?

Answers

If Alice has specified a requested minimum prime p of 3 bits, then the smallest prime number that would pass her size test would be 101 in binary, which is 5 in decimal. This is because 2^2 (or 10 in binary) is the smallest binary number that has three bits, and when we add 1 to it, we get 101, which is 5 in decimal.

The largest prime number that would pass her size test would be 111 in binary, which is 7 in decimal. This is because the largest binary number that has three bits is 2^3 - 1 (or 111 in binary), and this is also a prime number.

A paired number is a number communicated in the base-2 numeral framework or parallel numeral framework, a technique for numerical articulation which utilizes just two images: frequently "0" and "1" The base-2 numeral framework is a positional documentation with a radix of 2. A bit, or binary digit, is the name given to each digit.

Know more about binary number, here:

https://brainly.com/question/28222245

#SPJ11

when multiple audio files are suggested in the audio element which one is played by the browser?

Answers

When multiple audio files are suggested in the audio element, the browser will play the first supported audio file format that it can handle.

The audio element in HTML allows developers to provide multiple source files for the browser to choose from. These source files are specified using the `<source>` element within the audio element. Each `<source>` element can have a different audio file format and optionally specify additional attributes like codecs and MIME types. The browser will evaluate the list of provided source files in the order they appear in the HTML markup. It will attempt to play the first source file that it supports based on its capabilities and the formats specified. If the browser can't play the first file, it will move on to the next source file in the list and continue until it finds a supported format or exhausts all the provided options. Therefore, the first supported audio file format in the list of suggested sources is the one that will be played by the browser.

learn more about browser here:

https://brainly.com/question/28504444

#SPJ11

write a statement that throws an instance of the exception class negativenumber with the argument number.

Answers

The instance of an exception class with a specified argument can be thrown using the `raise` statement followed by the exception class name and the argument enclosed in parentheses.

How to throw an instance of an exception class with a specified argument in a statement?

To throw an instance of the exception class `negativenumber` with the argument `number`, you can use the following statement:

```python

raise negativenumber(number)

```

This statement will raise an exception of type `negativenumber` with the argument `number`. The `negativenumber` class should be defined beforehand as a subclass of the `Exception` class, and its `__init__` method should take the `number` argument and call the `super()` method to initialize the base `Exception` class.

For example:

```python

class negativenumber(Exception):

   def __init__(self, number):

       super().__init__(f"Negative number not allowed: {number}")

```

With this definition, the statement `raise negativenumber(-1)` would raise an exception with the message "Negative number not allowed: -1".

Learn more about instance

brainly.com/question/30039280

#SPJ11

Other Questions
large fish contain toxins from the smaller fish they eat. the increase in toxins from smaller fish to larger fish is called . large fish contain toxins from the smaller fish they eat. the increase in toxins from smaller fish to larger fish is called . bioaccumulation marine toxicity fecal-to-oral transmission paralytic shellfish poisoning c. why is the present value of the four $200,000 cash receipts less than the $800,000 to be received in the future? the present value is less due to over the 4 years. who was beheaded in 1649 after a bitter dispute with the puritans? Find the area of the surface obtained by rotating the curve about the x-axis:y=[(x^3)/6]+[1/(2x)] from 1/2 to 1 Some students skipped attending the Clemson Welcome party because of the thunderstorm.Thinking like an economist, we can conclude that:a.given the thunderstorm, the benefits of attending the party were more than the costs.b.the thunderstorm either raised the costs of attending or lowered the benefits of attending the party.c.the thunderstorm made driving to the party less costly.d.All of the above are true.e.Only a and b are true. : Jack's dinner bill was $25. 20. If Stephanie'sdinner bill was of Jack's bill, how muchwas Stephanie's bill The Thomas Theorem states, "If men define their situations as real, they are real in their consequences." This is the "social constructionist" view on society: we create realities in the social world simply because we believe something is real or necessary, and act accordingly. What does this mean? What is a real-life example of this theorem, and how does the theorem apply to that example? pls help answer this answer all of them thx Jaguar Corporation issues term bonds with a face value of $300,000 on January 1, Year One. The bonds have a stated rate of interest of 7 percent per year and a life of four years. They pay this interest annually on December 31. Because the market rate of interest at that time was 9 percent, the bonds were issued at a discount to create an effective annual rate of 9 percent. The present value of $1 in 4 periods at an annual interest rate of 9 percent is $0.70843. The present value of an ordinary annuity of $1 for 4 periods at an annual interest rate of 9 percent is $3.23972. a. What amount will Jaguar receive when the bonds are issued? b. What journal entry does the company make on January 1, Year One, when the bonds are issued? c. What journal entry or entries does the company make on December 31, Year One? d. What is the liability balance reported on the December 31, Year One, balance sheet? e. What journal entry or entries does the company make on December 31, Year Two? f. What is the liability balance reported on the December 31, Year Two, balance sheet? emily webster purchased a twenty-year endowment policy at age 27 with a face value of $25,000. what is her annual premium? what is her semi-annual premium? the difference between these payment options? (remember to compare annual premium to annual premium!) I need a examples of how to do this In the addition reaction of HCl to 2-methyl-2-butene, what is the first mechanistic step? - The pi electrons of the double bond attack the H of HCl (and the H-to-Cl bond cleaves); this attack adds the H to C3 and creates a carbocation at C2 - The pi electrons of the double bond attack the H of HCl (and the H-to-Cl bond cleaves); this attack adds the H to C2 and creates a carbocation at C3 - Chloride ion attacks carbon 3 (C3) - A hydride ion abstracts one of the 2-methyl hydrogens (as a proton) - Chloride ion attacks carbon 2 (C2) - The 2-methyl group leaves to create a carbocation - As the pi electrons attack the H of HCl (which adds the H to C2), the Cl attacks C3 in a 4-center, 4-electron process. - As the pi electrons attack the H of HCl (which adds the H to C3), the Cl attacks C2 in a 4-center, 4-electron process. one of the major reasons it was common practice for native americans to be placed in boarding schools for 60 years was H2O2 (aq) + 3 I(aq) + 2 H+(aq) I3(aq) + 2 H2O(l)For the reaction given, the [I] changes from 1.000 M to 0.868 M in the first 10 s.Question 1: What is the rate of change of [I-] in the first 10 s?a. (1.000 M -0.868 M)/10 sb. (0.868 M 1.000 M)/10 sc. 1.000 M 0.868 Md. 0.868 M 1.000 M arlene recently started having difficulty carrying out simple actions such as washing her hands when requested. she is experiencing for houses with the same square footage, number of bedrooms, number of bathrooms, and number of garages, a 1-year increase in the age of the house results on average in the u.s. supreme court has recognized a limited ________ exception to the fourth amendment exclusionary rule what is the 14c disintegration rate in an object that is 50,000 years old? (t1/2 = 5730 yr, the original rate of disintegration was 15.3 d/ming.) i am made of many cells. my cells have an organized nucleus. i mostly have two parents, but sometimes one. i can make my own food. what kingdom do i belong to? A city with a population of 40,000 people has an avg water usage of 180 gallons/person per day. If the return rate is 75%, what is the maximum daily flow rate for wastewater ? A. 5.4 MGD B. 14.6C. 2.2 D. 11