Answer:
D. when the number of moles of acid is exactly equal to the number of moles of base.
Explanation:
Regarding options A. and E., pKa and pKb would only be taken into consideration if the titrations were of weak acids and bases. However it is possible to have a titration of monoprotic acids and bases with strong acids and bases.
Another way of looking at the answer is identifying which one best describes the equivalence point.
Fluorine gas and water vapor react to form hydrogen fluoride gas and oxygen. What volume of oxygen would be produced by this reaction if 2.6em of were consumed? Also, be sure your answer has a unit symbol, and is rounded to the correct number of significant digits
Answer:
The reaction is 2F_2 (g) + 2H_2 O (g) rightarrow 4HF (g) + O_2 (g) 2 moles of fluorine gas (F_2) reacts with 2 moles of water vapors (H_2 O) to produce 4 moles of hy
The nucleus of an atom is made up of which of the following combinations of particles?
Answer: Atoms of different elements are found to have different number of protons, neutrons, and electrons. To distinguish one atom from another or to classify the various atoms, a number which indicates the number of protons in the nucleus of a given atom, is assigned to the atoms of each identified element. This number is known as the atomic number of the element. The atomic numbers for some of the elements which are associated with the study of semiconductors are given in the following table.
Explanation:
Element Symbol Atomic Number
Silicon Si 14
Germanium Ge 32
Arsenic As 33
Antimony Sb 51
Indium In 49
Gallium Ga 31
Boron B 5
Answer:
[tex]\boxed {\boxed {\sf Protons \ and \ neutrons}}[/tex]
Explanation:
The atom is made up of two main parts: the nucleus and the electron cloud.
The nucleus is the center and has two subatomic particles: the protons (positive charge) and the neutrons (no/neutral charge). The nucleus as a whole has a positive charge, since the neutrons don't provide a charge.
The electron cloud surrounds the nucleus and houses the negatively charged electrons in a "cloud" of energy levels.
So, the nucleus of the atom is made up of protons and neutrons.
Total enthalpy of formation of reactants and products, enthalpy of reaction. Cmon goons you’ll be rewarded handsomely
Answer:
am going to work it out
Explanation:
i am going to work it out and then tell you the answer ok
If the concentration of a reactant is tripled (all other things remain constant), and the reaction rate increases nine times, what is the reaction order with respect to the tripled reactant? Enter your answer as a number.If the concentration of a reactant is increased 1.5 times (all other things remain constant), and the reaction rate increases 2.25 times, what is the reaction order with respect to the reactant? Enter your answer as a number.If the concentration of a reactant is tripled (all other things remain constant), and the reaction rate remains constant, what is the reaction order with respect to the tripled reactant? Enter your answer as a number.When 29.0 mL of 0.220 M KIO3 is combined with 38.0 mL of H2SO3 and 50.0 mL of water, what is the resulting concentration of KIO3?
The reaction order for the following conditions are:
a. two
b. two
What do you mean by reaction order?Reaction order is the number of reactants, whose concentration affects the reaction rate.
The reaction order can be determined by adding the exponents of each reactant.
The rate equation is [tex]v^0 = k[A]^x + k[B]^y[/tex]
The first-order reaction is in which the reaction is dependent on one variable concentration.
The second-order reaction is that in which the reaction is dependent upon the concentration of two variables.
Thus, the correct options are a. two, b.two.
Learn more about reaction order
https://brainly.com/question/1769080
What evidence would a scientist use to determine the age of rock in a layer?
Answer: They can find fossils and use a technology called radiocarbon to find the age of the fossil and then do an approximate about the age of the rock.
Explanation:
Which will require more heat, increasing the temperature of 1 mol of C8H18(l) by a certain amount or increasing the temperature of 1 mol of H2O(l) by the same amount?
Answer:
Increasing the temperature of 1 mol of C8H18(l) requires more energy
Explanation:
To answer this question, we need to define molar heat capacity that is the amount of heat required to increase in 1K the temperature of 1 mole of substance.
That means the substance with higher molar heat requires more energy to increase its temperature
Molar heat of octane, C8H18 is 255.68J/Kmol
Molar heat of water is 75.38J/Kmol
That means increasing the temperature of 1 mol of C8H18(l) requires more energy
What mass of glucose (C6H12O6) should be dissolved in 12.0 kg of water to obtain a solution with a freezing point of -5.8 ∘C?
Solution properties are the properties of a solution that don't depend on the type of solute but only on the concentration of the solute.
Solutions from volatile substances have a higher boiling point and lower freezing points than the solvent
For freezing point can be formulated
[tex]\tt \Delta T_f=K_f.m[/tex]
K = molal freezing point constant
m = molal solution
A solution with a freezing point of -5.8 ∘C
[tex]\tt \Delta T_f=T_f~solvent-T_f~solution=0-(-5.8)=5.8[/tex]
[tex]\tt mass~of~glucose:\\\\\Delta T_f=K_f.m\\\\5.8=1.86^oC/m.\times \dfrac{mol~glucose}{12}\\\\mol~glucose=\dfrac{5.8\times 12}{1.86}=37.42[/tex]
[tex]\tt mass=mol\times MW=37.42\times 180=6735.6~g=6.7356~kg[/tex]
The compound F20 has two lone pairs on the central oxygen atom. What's the structure of an F2O molecule? Is this compound polar or non-polar?
A. Trigonal planar, polar
B. Bent or angular non-polar
C. Bent or angular polar
D. Trigonal planar non-polar
Answer:
Bent or Angular, Polar
Explanation:
I just took the test!
Answer:
C. Bent or angular polar
Explanation:
Heavier compounds tend to have higher boiling points. However, sulphur dichloride (Mr= 103.1 gmol-1) and sulphur hexafluoride (Mr = 146.1 g mol-1) have the boiling point of 59 °C and -50.8 °C respectively. Explain this phenomenon.
Calculate the final temperature (once the ice has melted) of a mixture made up initially of 70.0 mL liquid water at 28 oC and 5.0 g ice at 0.0 oC.
Answer:
21.52° C
Explanation:
From the given information:
mass of the liquid water = 70.0 mL
Initial temperature = 20°C
mass of the ice = 5.0 g
temperature of ice = 0.0°C
Using the calorimetric function:
heat lost by water = heat gained by ice.
mass of water × specific heat of water (s) × ΔT = mass of ice × specific heat of ice (s) × ΔT + n (ΔH_fusion}
⇒ 70 × 4.184 × (28 -x) = 5 × 2.108(x - 0) + [tex](\dfrac{5}{18})[/tex] × 6.01 × 10³
By solving the above equation,
x = 21.52° C
The final temperature of the mixture of water and ice is 21.5 ⁰C.
The given parameters;
initial volume of the liquid = 70 mL initial temperature of the water, = 28⁰Cmass of the ice, = 5.0 gtemperature of the ice, = 0⁰ Cspecific heat capacity of ice = 2.09 J/g ⁰Cheat of fusion of ice = 333.55 J/gspecific heat capacity of water = 4.184 J/g⁰ Cdensity of water = 1 g/mlLet the final temperature of the mixture = t
mass of the liquid water = 1 g/ml x 70 ml = 70 g
Apply the principle of conservation of energy to determine the final temperature of the mixture;
heat lost by water = heat gained by ice
[tex]70 \times 4.184(28 - t) = 5\times 2.09(t - 0) \ + \ 5 \times 333.55\\\\8200.64 - 292.88t = 10.45 t + 1667.75\\\\303.33t = 6532.89\\\\t = \frac{6532.89}{303.33}\\\\t = 21.5 \ ^0C[/tex]
Thus, the final temperature of the mixture of water and ice is 21.5 ⁰C.
Learn more here:https://brainly.com/question/12200172
2. If 4c-3= -31, what is the value of -2c+11
Explanation:
see the pic for the answer
the position-time graph shows the motion of four people. label the lines on graph need on the motion description in this table.
Answer:
4,2,3,1
Explanation:
After an afternoon party, a small cooler full of ice is dumped onto the hot ground and melts. If the cooler contained 6.60 kg of ice and the temperature of the ground was 42.5 °C, calculate the energy that is required to melt all the ice at 0 °C. The heat of fusion for water is 80.0 cal/g.
Answer:
The quantity of heat required to melt all the ice at 0°C is 2.21 * 10⁶ J
Explanation:
Latent heat of fusion is the heat absorbed by a unit mass of a given solid at its melting point that completely converts the solid to a liquid at the same temperature. Its unit is Joules/kg or Joules/g.
1 calorie = 4.184 Joules
Therefore , 80.0 cal/g = 80.0 cal/g * 4.184 J/cal = 334.72 J/g
1 g = 0.001 kg; Heat of fusion in J/kg = 334.72 J/g * 1g /0.001 kg = 3.35 * 10⁵ J/kg
Quantity of heat, Q = mass * latent heat of fusion of ice
quantity of heat required = 6.60 kg * 3.35 * 10⁵ J/kg
Quantity of heat required = 2.21 * 10⁶ J
Therefore, the quantity of heat required to melt all the ice at 0°C is 2.21 * 10⁶ J
find the percent yield,if 6.0g of Lithium chloride are actually produced and the theoretical yield is 35.4g of Lithium chloride.
Answer:
Percent yield = 17%
Explanation:
Given data:
Actual yield of lithium chloride = 6.0 g
Theoretical yield of lithium chloride = 35.4 g
Percent yield = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield )× 100
Now we will put the values in formula.
Percent yield = (6.0 g/ 35.4 g)× 100
Percent yield = 0.17 × 100
Percent yield = 17%
Which major product is formed when Br2 and H2O are added to 2-methylpropene to give the bromohydrin?
Answer:
See explanation and image attached
Explanation:
The addition of hypohalous acids to alkenes follows the Markovnikov rule. This rule states that the negative part of the addendum is joined to the carbon atom with the least number of hydrogen atoms (more substituted carbon atom).
In the addition of hypohalous acids, the halogen is the positive end of the addendum and the OH^- is the negative end of the addendum. This explains the product shown in the image attached.
Sunday
Monday
What
The
Freak
Saturday
Consider the following reaction:2 HgCl2(aq) + C2O42-(aq) 2 Cl-(aq) + 2 CO2(g) + Hg2Cl2(s)(a) The rate law for this reaction is first order in HgCl2(aq) and second order in C2O42-(aq). What is the rate law for this reaction?Rate = k [HgCl2(aq)] [C2O42-(aq)]Rate = k [HgCl2(aq)]2 [C2O42-(aq)]Rate = k [HgCl2(aq)] [C2O42-(aq)]2Rate = k [HgCl2(aq)]2 [C2O42-(aq)]2Rate = k [HgCl2(aq)] [C2O42-(aq)]3Rate = k [HgCl2(aq)]4 [C2O42-(aq)](b) If the rate constant for this reaction at a certain temperature is 0.0169, what is the reaction rate when [HgCl2(aq)] = 0.158 M and [C2O42-(aq)] = 0.202 M?Rate = M/s.(c) What is the reaction rate when the concentration of HgCl2(aq) is doubled, to 0.316 M while the concentration of C2O42-(aq) is 0.202 M?Rate = M/s
Answer:
b
Explanation:
The density of krypton gas at 1.35 atm and 54.1°C is ________ g/L.
a. 4.21
b. 0.304
c. 8.42
d. 0.0503
e. 0.237
a.
Explanation: I saw it on another website.
4. One mole of oxygen contains 6.02 x 102 molecules. How many oxygen molecules are in
5.55 moles of oxygen gas?|
Answer:
3.34x10²⁴ molecules of oxygen
Explanation:
1 Mole of particles of any kind of gases or particles are always 6.022x10²³.
1 mole of electrons are 6.022x10²³ electrons
1 mole of any gas are 6.022x10²³ molecules
1 mole of oxygen are 6.022x10²³ molecules. Thus, 5.55 moles are:
3.34x10²⁴ molecules of oxygendetermine moles of 1.5g of sodium carbonate.
Answer:
0.014mol
Explanation:
Given parameters:
Mass of Na₂CO₃ = 1.5g
Unknown:
Number of moles = ?
Solution:
Number of moles of a compound is mathematically expressed as;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16) = 106g/mol
Number of moles = [tex]\frac{1.5}{106}[/tex] = 0.014mol
Which of the following set of properties is most likely for a liquid with large, attractive intermolecular forces?
Answer:
is it ok na I hope this answers are ok
Answer:
Answer is: C) high melting point and high boiling point.
Explanation:
HOPE IT HELPS
Your Welcome
Mark me Brianly!!!
What forces cause mechanical weathering? Choose more than one
answer.
Answer:
mineral crystal growth
acid rain
carbonic acid
Answer:
Mineral crystal growth, Acid rain, Carbonic acid
A gaseous compound is placed in a rigid container of volume 10.0 L at temperature 300.0 K and at pressure 1.0 atm. The container is placed in an evacuated chamber and a small hole of area 2.65 mm2 is made in one of the container walls. It takes 1.00 minutes for the gas pressure in the container to fall to half of its original value. Determine the molar mass of the gas.
12oz of water initially at 75oF is mixed with 20oz of water intiially at 140oF. What is the final temperature?
Answer:
[tex]115.625^{\circ}\text{F}[/tex]
Explanation:
[tex]m_1[/tex] = First mass of water = 12 oz
[tex]m_2[/tex] = Second mass of water = 20 oz
[tex]\Delta T_1[/tex] = Temperature difference of the solution with respect to the first mass of water = [tex](T-75)^{\circ}\text{F}[/tex]
[tex]\Delta T_2[/tex] = Temperature difference of the solution with respect to the second mass of water = [tex](T-75)^{\circ}\text{F}[/tex]
c = Specific heat of water
As heat gain and loss in the system is equal we have
[tex]m_1c\Delta T_1=m_2c\Delta T_2\\\Rightarrow m_1\Delta T_1=m_2\Delta T_2\\\Rightarrow 12(T-75)=20(140-T)\\\Rightarrow 12T-900=2800-20T\\\Rightarrow 12T+20T=2800+900\\\Rightarrow 32T=3700\\\Rightarrow T=\dfrac{3700}{32}\\\Rightarrow T=115.625^{\circ}\text{F}[/tex]
The final temperature of the solution is [tex]115.625^{\circ}\text{F}[/tex].
A flask containing 100 g of water is heated, and the temperature of the water increases from 21°C to 90°C. How much heat did the water absorb if the
specific heat capacity of water is 4.184 J/gºC?
A. 289 J
B. 418.4 J
C. 28,870 J
D. 10,000 J
Answer:
28869.6J
Explanation:
Given parameters:
Mass of water in flask = 100g
Initial temperature = 21°C
Final temperature = 90°C
Specific heat capacity = 4.184J/g°C
Unknown:
Amount of heat the water absorbed = ?
Solution:
The amount f heat the water absorbed can be determined using the expression below:
H = m x C x Δt
m is the mass
C is the specific heat capacity of water
Δt is the change in temperature
Now insert the parameters and solve;
H = 100 x 4.184 x (90 - 21) = 28869.6J
Answer:
So its c
Explanation:
Write a balanced half-reaction for the oxidation of gaseous nitric oxide (NO) to aqueous nitrous acid (HNO2) in acidic aqueous solution.
Answer:
NO + H₂O → HNO₂ + 1 e- + 1 H⁺
Step-by-step explanation:
NO ⇒ oxidation number of N = +2
HNO₂ ⇒ oxidation number of N= +3
Therefore, NO has to lose 1 electron to be oxidized to HNO₂. We write the half-reaction with 1 electron (1 e-) in the products side.
NO → HNO₂ + 1 e-
Now, we have 0 electrical charges in the reactants side, and a total of -1 electrical charge in the products side. As the reaction is in acidic aqueous solution, we have to add H⁺ ions to balance the charges. We perform the balance by adding 1 H⁺ (positive charge) to neutralize the negative charge in the side of the products:
NO → HNO₂ + 1 e- + 1 H⁺
Now, we perform the mass balance. We have:
N: 1 atom in both sides
O: 1 atom in reactants side and 2 atoms in products side
H: 0 atoms in reactants side, 2 atoms in products side.
Thus, we have to add 1 H₂O molecule to the reactants side to equal the masses:
NO + H₂O → HNO₂ + 1 e- + 1 H⁺
Finally, the oxidation half-reaction is:
NO + H₂O → HNO₂ + 1 e- + 1 H⁺
i don’t understand but i need help asap
Answer:
c
Explanation:
I think I remember this from last year
1+1 hahahahahhhahahaahahahahahahahahahahahahahaha why u dumb
Answer:
1+1=2 Unless this is a trick question. Then it's most likely 11.
Explanation:
1 + 1 = 2
thxs for the points realy tho thxs
write the chemical formula of tetraphosporus osctasulfide
Answer:
P4S8 .
the chemical formula of Tetraphosporus osctasulfide is p4S8
How many seconds are in 100 years(factor label conversion)
Answer:
0.0166
Explanation:
This conversion of 100 seconds to minutes has been calculated by multiplying 100 seconds by 0.0166 and the result is 1.6666 minutes.
I hope this helps,
even a little bit