The maximum speed of the photoelectrons is 1.355 × 10^6 m/s.
The formula for energy of a photon is given by,E = hf = hc/λ
where E is the energy of a photon, f is its frequency, h is Planck's constant, c is the speed of light, and λ is the wavelength. For this question,
h = 6.626 × 10^-34 J s and
c = 3.00 × 10^8 m/s .
Part A
The energy of each incident photon is 5.162×10−19 J
The power of the incident light is 0.74 W.
The total number of photons hitting the metal surface in 3.0 s is calculated as:
Energy of photons = Power × Time => Energy of 1 photon × Number of photons = Power × Time
So,
Number of photons = Power × Time/Energy of 1 photon
Therefore, Number of photons = 0.74 × 3.0 / 5.162 × 10^-19 = 4293.3 ≈ 4293.
Thus, 4293 photons in the incident light hit the metal surface in 3.0 s.
Part B
The energy required to remove an electron from the metal surface is known as the work function of the metal.
The work function W0 of the metal surface used is 2.71 eV = 2.71 × 1.6 × 10^-19 J = 4.336 × 10^-19 J.
Each photon must transfer at least the energy equivalent to the work function to the electron. The maximum kinetic energy of the photoelectrons is given by:
KE
max = Energy of photon - Work function KE
max = (5.162×10−19 J) - (2.71 × 1.6 × 10^-19 J) = 0.822 × 10^-18 J.
Thus, the max kinetic energy of the photoelectrons is 0.822 × 10^-18 J.
Part C
The maximum speed vmax of the photoelectrons is given by the classical physics formula for kinetic energy, which is:
KEmax = (1/2)mv^2
Where m is the mass of an electron, and v is the maximum speed of photoelectrons.The mass of an electron is 9.11×10−31 kg.
Thus, vmax = sqrt[(2 × KEmax) / m]`vmax = sqrt[(2 × 0.822 × 10^-18 J) / 9.11 × 10^-31 kg] = 1.355 × 10^6 m/s
Therefore, the maximum speed of the photoelectrons is 1.355 × 10^6 m/s.
Learn more about photoelectrons with the given link,
https://brainly.com/question/1359033
#SPJ11
Hoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300MW. The dam generates electricity with water taken from a depth of 151 m and an average flow rate of 620 m 3
/s. (a) Calculate the power in this flow. Report your answer in Megawatts 1,000,000 W =1MW 25. Hoover Dam on the Colorado River is the highest dam in the United States at 221 m, with an output of 1300MW. The dam generates electricity with water taken from a depth of 150 m and an average flow rate of 650 m 3
/s. (a) Calculate the power in this flow. (b) What is the ratio of this power to the facility's average of 680 MW? (These are the same values as the regular homework assignment) The ratio is 2.12 The ratio is 1.41 The ratio is 0.71 The ratio is 0.47
Hoover Dam on the Colorado River is the tallest dam in the United States, measuring 221 meters in height, with an output of 1300MW. The dam's electricity is generated by water that is taken from a depth of 151 meters and flows at an average rate of 620 m3/s.Therefore, the correct answer is the ratio is 1.41.
To compute the power in this flow, we use the formula:Power = (density) * (Volume flow rate) * (acceleration due to gravity) * (head). Where density is the density of water, which is 1000 kg/m3, and the acceleration due to gravity is 9.81 m/s2. Head = (depth) * (density) * (acceleration due to gravity). Substituting these values,Power = (1000 kg/m3) * (620 m3/s) * (9.81 m/s2) * (151 m) = 935929200 Watts. Converting this value to Megawatts,Power in Megawatts = 935929200 / 1000000 = 935.93 MWFor the second question,
(a) The power in the second flow is given by the formula:Power = (density) * (Volume flow rate) * (acceleration due to gravity) * (head)Where density is the density of water, which is 1000 kg/m3, and the acceleration due to gravity is 9.81 m/s2.Head = (depth) * (density) * (acceleration due to gravity) Power = (1000 kg/m3) * (650 m3/s) * (9.81 m/s2) * (150 m) = 956439000 Watts. Converting this value to Megawatts,Power in Megawatts = 956439000 / 1000000 = 956.44 MW
(b) The ratio of the power in this flow to the facility's average power is given by:Ratio of the power = Power in the second flow / Average facility power= 956.44 MW / 680 MW= 1.41. Therefore, the correct answer is the ratio is 1.41.
To know more about electricity visit:
brainly.com/question/31173598
#SPJ11
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ? 1.40 2.80 0.00 1.00
The magnitude of the maximum torque that the electric field exerts on the dipole is[tex]1.00×10^-3[/tex]N⋅m, which is equivalent to 1.00 N⋅mm or [tex]1.00×10^-3[/tex] N⋅m.
The torque (τ) exerted on an electric dipole in an electric field is given by the formula:
τ = p * E * sin(θ)
where p is the dipole moment, E is the electric field, and θ is the angle between the dipole moment and the electric field.
In this case, the dipole moment is given as p = 5.00×[tex]10^-10[/tex] C⋅m, and the electric field is given as E = (2.00×1[tex]0^6[/tex] N/C) I + (2.00×[tex]10^6[/tex] N/C) j.
To find the magnitude of the maximum torque, we need to determine the angle θ between the dipole moment and the electric field.
Since the electric field is given in terms of its x- and y-components, we can calculate the angle using the formula:
θ = arctan(E_y / E_x)
Substituting the given values, we have:
θ = arctan((2.00×[tex]10^6[/tex] N/C) / (2.00×[tex]10^6[/tex] N/C)) = arctan(1) = π/4
Now we can calculate the torque:
τ = p* E * sin(θ) = (5.00×[tex]10^-10[/tex]C⋅m) * (2.00×[tex]10^6[/tex] N/C) * sin(π/4) = (5.00×[tex]10^-10[/tex] C⋅m) * (2.00×[tex]10^6[/tex] N/C) * (1/√2) = 1.00×[tex]10^-3[/tex]N⋅m
To know more about torque refer to-
https://brainly.com/question/30338175
#SPJ11
Complete question
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ?
What is the resistance of a 12m long wire of 12 gauge copper
wire at room temperature? The resistivity of copper at room
temperature is 1.72 x 10-8 Ωm and the diameter of 12
gauge wire is 2.64 mm.
Approximately 3.867 ohms is the resistance of a 12m long wire of 12 gauge copper at room temperature.
To calculate the resistance of the copper wire, we can use the formula for resistance:
Resistance (R) = (ρ * length) / cross-sectional area
The resistivity of copper (ρ) at room temperature is 1.72 x 10^(-8) Ωm and the length of the wire (length) is 12 meters, we need to determine the cross-sectional area.
The gauge of the wire is given as 12 gauge, and the diameter (d) of a 12 gauge copper wire is 2.64 mm. To calculate the cross-sectional area, we can use the formula:
Cross-sectional area = π * (diameter/2)^2
Converting the diameter to meters, we have d = 2.64 x 10^(-3) m. By halving the diameter to obtain the radius (r), we find r = 1.32 x 10^(-3) m.
Now, we can calculate the cross-sectional area using the radius:
Cross-sectional area = π * (1.32 x 10^(-3))^2 ≈ 5.456 x 10^(-6) m^2
Finally, substituting the values into the resistance formula, we get:
Resistance (R) = (1.72 x 10^(-8) Ωm * 12 m) / (5.456 x 10^(-6) m^2)
≈ 3.867 Ω
Therefore, the resistance of a 12m long wire of 12 gauge copper at room temperature is approximately 3.867 ohms.
learn more about "resistance ":- https://brainly.com/question/17563681
#SPJ11
Any two point charges exert equally strong electric forces on each other. Coulomb's constant is
8.99 × 10° N-m2/C?, and given that an electron has a charge of -1.60 × 10-19 C: What is the electric force (magnitude and direction) between two electrons (-e) separated by a
distance of 15.5 cm?
The magnitude of the electric force between two electrons separated by a distance of 15.5 cm is approximately 2.32 × 10^-8 N. The direction of the force is attractive, as like charges repel each other, and both electrons have a negative charge.
The electric force between two charges can be calculated using Coulomb's law:
F = k * |q1 * q2| / r^2
where F is the electric force, k is Coulomb's constant (8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.
Given that both charges are electrons with a charge of -1.60 × 10^-19 C, and the distance between them is 15.5 cm (which can be converted to meters as 0.155 m), we can substitute the values into the equation:
F = (8.99 × 10^9 N m^2/C^2) * |-1.60 × 10^-19 C * -1.60 × 10^-19 C| / (0.155 m)^2
Calculating the expression inside the absolute value:
|-1.60 × 10^-19 C * -1.60 × 10^-19 C| = (1.60 × 10^-19 C)^2 = 2.56 × 10^-38 C^2
Substituting this value and the distance into the equation:
F = (8.99 × 10^9 N m^2/C^2) * (2.56 × 10^-38 C^2) / (0.155 m)^2
Calculating further:
F ≈ 2.32 × 10^-8 N
Therefore, the magnitude of the electric force between two electrons separated by a distance of 15.5 cm is approximately 2.32 × 10^-8 N. The direction of the force is attractive, as like charges repel each other, and both electrons have a negative charge.
Learn more about magnitude:
https://brainly.com/question/30337362
#SPJ11
The leneth of a steel bear increases by 0.73 mm when its temperature is raised from 22°C to 35°C. what
is the length of the beam at 22°C? What would the leneth be at 15°C?
The steel beam's length at 22°C can be found using the temperature coefficient of linear expansion, and the length at 15°C can be calculated similarly.
To find the length of the steel beam at 22°C, we can use the given information about its temperature coefficient of linear expansion. Let's assume that the coefficient is α (alpha) in units of per degree Celsius.
The change in length of the beam, ΔL, can be calculated using the formula:
ΔL = α * L0 * ΔT,
where L0 is the original length of the beam and ΔT is the change in temperature.
We are given that ΔL = 0.73 mm, ΔT = (35°C - 22°C) = 13°C, and we need to find L0.
Rearranging the formula, we have:
L0 = ΔL / (α * ΔT).
To find the length at 15°C, we can use the same formula with ΔT = (15°C - 22°C) = -7°C.
Please note that we need the value of the coefficient of linear expansion α to calculate the lengths accurately.
To know more about linear expansion, click here:
brainly.com/question/32547144
#SPJ11
A thermistor is used in a circuit to control a piece of equipment automatically. What might this circuit be used for? A lighting an electric lamp as it becomes darker B ringing an alarm bell if a locked door is opened C switching on a water heater at a pre-determined time D turning on an air conditioner when the temperature rises
A thermistor is used in a circuit to control a piece of equipment automatically, this circuit be used for D. Turn on an air conditioner when the temperature rises.
A thermistor is a type of resistor whose resistance value varies with temperature. In a circuit, it is used as a sensor to detect temperature changes. The thermistor is used to control a piece of equipment automatically in various applications like thermostats, heating, and cooling systems. A circuit with a thermistor may be used to turn on an air conditioner when the temperature rises. In this case, the thermistor is used to sense the increase in temperature, which causes the resistance of the thermistor to decrease.
This change in resistance is then used to trigger the circuit, which turns on the air conditioner to cool the room. A thermistor circuit may also be used to switch on a water heater at a pre-determined time. In this case, the thermistor is used to detect the temperature of the water, and the circuit is programmed to turn on the heater when the water temperature falls below a certain level. This helps to maintain a consistent temperature in the water tank. So therefore the correct answer is D, turn on an air conditioner when the temperature rises.
Learn more about thermistor at:
https://brainly.com/question/31888503
#SPJ11
On a day when the speed of sound is 345 m/s, the fundamental frequency of a particular stopped organ pipe is 220 Hz. The second overtone of this pipe has the same wavelength as the third harmonic of an open pipe. How long is the open pipe? Express your answer in mm
The length of the open pipe can be determined by comparing the wavelength of the third harmonic of the open pipe to the second overtone of the stopped organ pipe.
The fundamental frequency of a stopped organ pipe is determined by the length of the pipe, while the frequency of a harmonic in an open pipe is determined by the length and speed of sound. In this case, the fundamental frequency of the stopped organ pipe is given as 220 Hz.
The second overtone of the stopped organ pipe is the third harmonic, which has a frequency that is three times the fundamental frequency, resulting in 660 Hz (220 Hz × 3). The wavelength of this second overtone can be calculated by dividing the speed of sound by its frequency: wavelength = speed of sound / frequency = 345 m/s / 660 Hz = 0.5227 meters.
Now, we need to find the length of the open pipe that produces the same wavelength as the third harmonic of the stopped organ pipe. Since the open pipe has a fundamental frequency that corresponds to its first harmonic, the wavelength of the third harmonic in the open pipe is four times the length of the pipe. Therefore, the length of the open pipe can be calculated by multiplying the wavelength by a factor of 1/4: length = (0.5227 meters) / 4 = 0.1307 meters.
Finally, to express the length in millimeters, we convert the length from meters to millimeters by multiplying it by 1000: length = 0.1307 meters × 1000 = 130.7 mm. Hence, the length of the open pipe is 130.7 mm.
To learn more about wavelength.
Click here:brainly.com/question/29548846
#SPJ11
A rod of negligible resistance is sliding along a pair of long tracks--also of negligible resistance. The tracks are connected on one end by a wire of resistance R, the rod is sliding away from this end at constant speed, and there is a uniform magnetic field which points in a direction perpendicular to the plane containing the rod and the tracks. Initially, the area bounded by the rod, the tracks, and the end is A1, but after some time the area is A2 = 3A1. At this initial time, the induced emf was 3.0 V. What will it be at the latter time, when the total enclosed area has tripled?
The induced emf will be 9.0 V when the total enclosed area has tripled.
According to Faraday's law of electromagnetic induction, the induced emf (ε) in a circuit is proportional to the rate of change of magnetic flux through the circuit. The magnetic flux (Φ) is given by the product of the magnetic field (B) and the area (A) enclosed by the circuit.
In this scenario, the initially induced emf (ε1) is 3.0 V, and the initial area (A1) is known. When the total enclosed area becomes A2 = 3A1, it means the area has tripled. Since the speed of the rod is constant, the rate of change of area is also constant.
Therefore, the ratio of the final area (A2) to the initial area (A1) is equal to the ratio of the final induced emf (ε2) to the initial induced emf (ε1).
Mathematically, we can express this relationship as:
A2/A1 = ε2/ε1
Substituting the known values, A2 = 3A1 and ε1 = 3.0 V, we can solve for ε2:
3A1/A1 = ε2/3.0 V
3 = ε2/3.0 V
Cross-multiplying, we find:
ε2 = 9.0 V
Hence, the induced emf will be 9.0 V when the total enclosed area has tripled.
To learn more about magnetic flux
Click here brainly.com/question/1596988
#SPJ11
A proton is moving north at a velocity of 4.9-10 m/s through an east directed magnetic field. The field has a strength of 9.6-10 T. What is the direction and strength of the magnetic force?
The direction of the magnetic force is towards the west, and its strength is [tex]7.7 * 10^{-28}[/tex] N.
Given data, Velocity of proton, v = 4.9 × 10⁻¹⁰ m/s
Strength of magnetic field, B = 9.6 × 10⁻¹⁰ T
We know that the magnetic force is given by the equation:
F = qvBsinθ
where, q = charge of particle, v = velocity of particle, B = magnetic field strength, and θ = angle between the velocity and magnetic field vectors.
Now, the direction of the magnetic force can be determined using Fleming's left-hand rule. According to this rule, if we point the thumb of our left hand in the direction of the velocity vector, and the fingers in the direction of the magnetic field vector, then the direction in which the palm faces is the direction of the magnetic force.
Therefore, using Fleming's left-hand rule, the direction of the magnetic force is towards the west (perpendicular to the velocity and magnetic field vectors).
Now, substituting the given values, we have:
[tex]F = (1.6 * 10^{-19} C)(4.9 * 10^{-10} m/s)(9.6 *10^{-10} T)sin 90°F = 7.7 * 10^{-28} N[/tex]
Thus, the direction of the magnetic force is towards the west, and its strength is [tex]7.7 * 10^{-28}[/tex] N.
Learn more about " magnetic force " refer to the link : https://brainly.com/question/26257705
#SPJ11
(a) Find the distance of the image from a thin diverging lens of focal length 30 cm if the object is placed 20 cm to the right of the lens. Include the correct sign. cm (b) Where is the image formed?
The image is formed on the same side of the object.
Focal length, f = -30 cm
Distance of object from the lens, u = -20 cm
Distance of the image from the lens, v = ?
Now, using the lens formula, we have:
1/f = 1/v - 1/u
Or, 1/-30 = 1/v - 1/-20
Or, v = -60 cm (distance of image from the lens)
The negative sign of the image distance indicates that the image formed is virtual, erect, and diminished.
The image is formed on the same side of the object. So, the image is formed 60 cm to the left of the lens.
To learn more about image, refer below:
https://brainly.com/question/30725545
#SPJ11
A hollow square steel tube has a height and width dimension of 5 in and a wall thickness of 0.4 in. and an original length of 8 in. The tube is loaded with 44000 lb. in compression and is shortened by 0.0017 in. as a result of the load. Determine the Modulus of Elasticity of the steel with 1-decimal place accuracy.E= _______ x10^6
(to 1 decimal place)
The Modulus of Elasticity of the steel with 1-decimal place accuracy is 0.0017 in / 8 in
To determine the modulus of elasticity (E) of the steel, we can use Hooke's law, which states that the stress (σ) is directly proportional to the strain (ε) within the elastic limit.
The stress (σ) can be calculated using the formula:
σ = F / A
Where:
F is the force applied (44000 lb in this case)
A is the cross-sectional area of the steel tube.
The strain (ε) can be calculated using the formula:
ε = ΔL / L0
Where:
ΔL is the change in length (0.0017 in)
L0 is the original length (8 in)
The modulus of elasticity (E) can be calculated using the formula:
E = σ / ε
Now, let's calculate the cross-sectional area (A) of the steel tube:
The outer dimensions of the tube can be calculated by adding twice the wall thickness to each side of the inner dimensions:
Outer height = 5 in + 2 × 0.4 in = 5.8 in
Outer width = 5 in + 2 × 0.4 in = 5.8 in
The cross-sectional area (A) is the product of the outer height and outer width:
A = Outer height × Outer width
Substituting the values:
A = 5.8 in × 5.8 in
A = 33.64 in²
Now, we can calculate the stress (σ):
σ = 44000 lb / 33.64 in²
Next, let's calculate the strain (ε):
ε = 0.0017 in / 8 in
Finally, we can calculate the modulus of elasticity (E):
E = σ / ε
To know more about elasticity click on below link :
https://brainly.com/question/17250844#
#SPJ11
A loop of wire carrying current I (moving counterclockwise as seen from above) lies in the xy. plane. The loop is placed in a constant magnetic field of magnitude B that points at 30° from the z-axis. If the loop has a radius of 10 meters, carries a current of 2 amps, and the magnitude of the magnetic field is B Tesla, then the magnitude of the torque on the loop is given by am Newton-meters What is the value of a if B=5 Tesla?
The value of a is 100, as it represents the coefficient π in the equation. Therefore, if B = 5 Tesla, the magnitude of the torque on the loop is 500π N·m, or approximately 1570 N·m.
The torque on a current-carrying loop placed in a magnetic field is given by the equation τ = NIABsinθ, where τ is the torque, N is the number of turns in the loop, I is the current, A is the area of the loop, B is the magnitude of the magnetic field, and θ is the angle between the magnetic field and the normal to the loop.
In this case, the loop has a radius of 10 meters, so the area A is πr² = π(10 m)² = 100π m². The current I is 2 amps, and the magnitude of the magnetic field B is 5 Tesla. The angle θ between the magnetic field and the z-axis is 30°.
Plugging in the values into the torque equation, we have: τ = (2)(1)(100π)(5)(sin 30°)
Using the approximation sin 30° = 0.5, the equation simplifies to: τ = 500π N·m
To know more about torque refer here:
https://brainly.com/question/28220969#
#SPJ11
Four charged spheres, with equal charges of +2.30 C, are
situated in corner positions of a square of 60 cm. Determine the
net electrostatic force on the charge in the top right corner of
the square.
The net electrostatic force on the charge in the top right corner of the square is 8.91 x 10⁶ N at an angle of 14.0° above the horizontal.
The expression for the electrostatic force between two charged spheres is:
F=k(q₁q₂/r²)
Where, k is the Coulomb constant, q₁ and q₂ are the charges of the spheres and r is the distance between their centers.
The magnitude of each force is:
F=k(q₁q₂/r²)
F=k(2.30C x 2.30C/(0.60m)²)
F=8.64 x 10⁶ N3. If F₁, F₂, and F₃ are the magnitudes of the forces acting along the horizontal and vertical directions respectively, then the net force along the horizontal direction is:
Fnet=F₁ - F₂
Since the charges in the top and bottom spheres are equidistant from the charge in the top right corner, their forces along the horizontal direction will be equal in magnitude and opposite in direction, so:
F/k(2.30C x 2.30C/(0.60m)²)
= 8.64 x 10⁶ N4.
The net force along the vertical direction is: F
=F₃
= F/k(2.30C x 2.30C/(1.20m)²)
= 2.16 x 10⁶ N5.
Fnet=√(F₁² + F₃²)
= √((8.64 x 10⁶)² + (2.16 x 10⁶)²)
= 8.91 x 10⁶ N6.
The direction of the net force can be obtained by using the tangent function: Ftan=F₃/F₁= 2.16 x 10⁶ N/8.64 x 10⁶ N= 0.25tan⁻¹ (0.25) = 14.0° above the horizontal
Therefore, the net electrostatic force on the charge in the top right corner of the square is 8.91 x 10⁶ N at an angle of 14.0° above the horizontal.
To know more about electrostatic force please refer:
https://brainly.com/question/20797960
#SPJ11
PROBLEM STATEMENT Housewives claims that bulk red label wine is stronger than the Red Label wine found on Supermarket shelves. Plan and design an experiment to prove this claim HYPOTHESIS AM APPARATUS AND MATERIALS DIAGRAM OF APPARATUS (f necessary METHOD On present tense) VARIABLES: manipulated controlled responding EXPECTED RESULTS ASSUMPTION PRECAUTIONS/ POSSIBLE SOURCE OF ERROR
To prove the claim that bulk red label wine is stronger than the Red Label wine found on supermarket shelves, an experiment can be designed to compare the alcohol content of both types of wine.
To investigate the claim, the experiment would involve analyzing the alcohol content of bulk red label wine and the Red Label wine available in supermarkets. The hypothesis assumes that bulk red label wine has a higher alcohol content than the Red Label wine sold in supermarkets.
In order to conduct this experiment, the following apparatus and materials would be required:
1. Samples of bulk red label wine
2. Samples of Red Label wine from a supermarket
3. Alcohol meter or hydrometer
4. Wine glasses or containers for testing
The experiment would proceed as follows:
1. Obtain representative samples of bulk red label wine and Red Label wine from a supermarket.
2. Ensure that the samples are of the same vintage and have been stored under similar conditions.
3. Use the alcohol meter or hydrometer to measure the alcohol content of each wine sample.
4. Pour the wine samples into separate wine glasses or containers.
5. Observe and record any visual differences between the wines, such as color or clarity.
Variables:
- Manipulated variable: Type of wine (bulk red label wine vs. Red Label wine from a supermarket)
- Controlled variables: Vintage of the wine, storage conditions, and volume of wine used for testing
- Responding variable: Alcohol content of the wine
Expected Results:
Based on the hypothesis, it is expected that the bulk red label wine will have a higher alcohol content compared to the Red Label wine from a supermarket.
Assumption:
The assumption is that the bulk red label wine, being purchased in larger quantities, may be sourced from different suppliers or production methods that result in a higher alcohol content compared to the Red Label wine sold in supermarkets.
Precautions/Possible Sources of Error:
1. Ensure that the alcohol meter or hydrometer used for measuring the alcohol content is calibrated properly.
2. Take multiple measurements for each wine sample to ensure accuracy.
3. Avoid cross-contamination between the wine samples during testing.
4. Ensure the wine samples are handled and stored properly to maintain their integrity.
Learn more about alcohol
brainly.com/question/29268872
#SPJ11
Why must hospital personnel wear special conducting shoes while working around oxygen in an operating room?What might happen if the personnel wore shoes with rubber soles?
Hospital personnel must wear special conducting shoes in operating rooms to prevent the buildup of static electricity, which could potentially ignite the highly flammable oxygen. Wearing shoes with rubber soles increases the risk of static discharge and should be avoided to ensure the safety of everyone in the operating room.
Hospital personnel must wear special conducting shoes while working around oxygen in an operating room because oxygen is highly flammable and can ignite easily. These special shoes are made of materials that conduct electricity, such as leather, to prevent the buildup of static electricity.
If personnel wore shoes with rubber soles, static electricity could accumulate on their bodies, particularly on their feet, due to the friction between the rubber soles and the floor. This static electricity could then discharge as a spark, potentially igniting the oxygen in the operating room.
By wearing conducting shoes, the static electricity is safely discharged to the ground, minimizing the risk of a spark that could cause a fire or explosion. The conducting materials in these shoes allow any static charges to flow freely and dissipate harmlessly. This precaution is crucial in an environment where oxygen is used, as even a small spark can lead to a catastrophic event.
To know more about friction visit:
https://brainly.com/question/28356847
#SPJ11
Light is travelling from medium A tretractive index 1.4) to medium B (retractive index 1.6. If the incident angle is 32.70 what would be retracted ankle in medium B? Express your answer in degrees
The refractive angle in medium B is 15.22°
The given values are:Medium A has a refractive index of 1.4.Medium B has a refractive index of 1.6.The incident angle is 32.70.The formula for the refractive index is:n1sin θ1 = n2sin θ2Where,n1 is the refractive index of medium A.n2 is the refractive index of medium B.θ1 is the angle of incidence in medium A.θ2 is the angle of refraction in medium B.By substituting the given values in the above formula we get:1.4sin 32.70° = 1.6sin θ2sin θ2 = (1.4sin 32.70°) / 1.6sin θ2 = 0.402 / 1.6θ2 = sin⁻¹(0.402 / 1.6)θ2 = 15.22°The refractive angle in medium B is 15.22°.Hence, the correct option is (D) 15.22°.
Learn more about refractive angle:
https://brainly.com/question/30048990
#SPJ11
Questions 7.39 Homework. Unanswered ★ A pendulum is fashioned out of a thin bar of length 0.55 m and mass 1.9 kg. The end of the bar is welded to the surface of a sphere of radius 0.11 m and mass 0.86 kg. Find the centre of mass of the composite object as measured in metres from the end of the bar without the sphere. Type your numeric answer and submit
The center of mass of the composite object, consisting of the bar and sphere, is approximately 0.206 meters from the end of the bar. This is calculated by considering the individual centers of mass and their weighted average based on their masses.
To find the center of mass of the composite object, we need to consider the individual center of masses of the bar and the sphere and calculate their weighted average based on their masses.
The center of mass of the bar is located at its midpoint, which is L/2 = 0.55 m / 2 = 0.275 m from the end of the bar.
The center of mass of the sphere is at its geometric center, which is at a distance of R/2 = 0.11 m / 2 = 0.055 m from the end of the bar.
Now we calculate the weighted average:
Center of mass of the composite object = ([tex]m_bar[/tex] * center of mass of the bar + [tex]m_bar[/tex] * center of mass of the sphere) / ([tex]m_bar + m_sphere[/tex])
Center of mass of the composite object = (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) / (1.9 kg + 0.86 kg)
To solve the expression (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) / (1.9 kg + 0.86 kg), we can simplify the numerator and denominator separately and then divide them.
Numerator: (1.9 kg * 0.275 m + 0.86 kg * 0.055 m) = 0.5225 kg⋅m + 0.0473 kg⋅m = 0.5698 kg⋅m
Denominator: (1.9 kg + 0.86 kg) = 2.76 kg
Now we can calculate the expression:
(0.5698 kg⋅m) / (2.76 kg) ≈ 0.206 m
Therefore, the solution to the expression is approximately 0.206 meters.
To know more about the center of mass refer here,
https://brainly.com/question/8662931#
#SPJ11
50. The angle that a reflected light ray makes with the surface normal A) is smaller B) the same size C) greater than the angle that the incident ray makes with the normal 51. The speed of light in gl
The angle that a reflected light ray makes with the surface normal is smaller.
The law of reflection states that the angle of incidence is equal to the angle of reflection. When light is reflected from a surface, the angle at which it is reflected (angle of reflection) is equal to the angle at which it hits the surface (angle of incidence). The angle that a reflected light ray makes with the surface normal is the angle of reflection. Therefore, the answer is that the angle that a reflected light ray makes with the surface normal is smaller than the angle that the incident ray makes with the normal.
The speed of light in glass is less than the speed of light in a vacuum. This means that the refractive index of glass is greater than 1. When light passes through a medium with a higher refractive index than the medium it was previously in, the light is bent towards the normal. Therefore, the answer is that the speed of light in glass is less than the speed of light in a vacuum, and the refractive index of glass is greater than 1.
The angle that a reflected light ray makes with the surface normal is A) is smaller. The law of reflection states that the angle of incidence is equal to the angle of reflection. When light is reflected from a surface, the angle at which it is reflected (angle of reflection) is equal to the angle at which it hits the surface (angle of incidence). The angle that a reflected light ray makes with the surface normal is the angle of reflection. Therefore, the answer is that the angle that a reflected light ray makes with the surface normal is smaller than the angle that the incident ray makes with the normal.
The speed of light in glass is less than the speed of light in a vacuum. This means that the refractive index of glass is greater than 1. When light passes through a medium with a higher refractive index than the medium it was previously in, the light is bent towards the normal. Therefore, the answer is that the speed of light in glass is less than the speed of light in vacuum, and the refractive index of glass is greater than 1.
When a light wave strikes a surface, it can be either absorbed or reflected. Reflection occurs when light bounces back from a surface. The angle at which the light strikes the surface is known as the angle of incidence, and the angle at which it reflects is known as the angle of reflection. The angle of incidence is always equal to the angle of reflection, as stated by the law of reflection. The angle that a reflected light ray makes with the surface normal is the angle of reflection. It's smaller than the angle of incidence.
When light travels through different mediums, such as air and glass, its speed changes, and it bends. Refraction is the process of bending that occurs when light moves from one medium to another with a different density. The refractive index is a measure of the extent to which a medium slows down light compared to its speed in a vacuum. The refractive index of a vacuum is 1.
When light moves from a medium with a low refractive index to a medium with a high refractive index, it bends toward the normal, which is a line perpendicular to the surface separating the two media.
When light is reflected from a surface, the angle of reflection is always equal to the angle of incidence. The angle of reflection is the angle that a reflected light ray makes with the surface normal, and it is smaller than the angle of incidence. The refractive index of a medium is a measure of how much the medium slows down light compared to its speed in a vacuum. When light moves from a medium with a low refractive index to a medium with a high refractive index, it bends toward the normal.
To know more about refractive index visit
brainly.com/question/30761100
#SPJ11
A copper wire has a length of 1.50 m and a cross sectional area of 0.280 mm? If the resistivity of copper is 1.70 x 100 m and a potential difference of 0.100 Vis maintained across as length determine the current in the wire (in A)
The current in the copper wire is approximately 0.01096 A (or 10.96 mA).
To determine the current in the copper wire, we can use Ohm's Law, which states that the current (I) flowing through a conductor is equal to the potential difference (V) across the conductor divided by the resistance (R).
In this case, the resistance (R) of the copper wire can be calculated using the formula:
R = (ρ * L) / A
Where:
ρ is the resistivity of copper (1.70 x 10^-8 Ω·m)
L is the length of the wire (1.50 m)
A is the cross-sectional area of the wire (0.280 mm² = 2.80 x 10^-7 m²)
Substituting the given values into the formula, we have:
R = (1.70 x 10^-8 Ω·m * 1.50 m) / (2.80 x 10^-7 m²)
R ≈ 9.11 Ω
Now, we can calculate the current (I) using Ohm's Law:
I = V / R
Substituting the given potential difference (V = 0.100 V) and the calculated resistance (R = 9.11 Ω), we have:
I = 0.100 V / 9.11 Ω
I ≈ 0.01096 A (or approximately 10.96 mA)
Therefore, the current in the copper wire is approximately 0.01096 A (or 10.96 mA).
Learn more about Ohm's Law from the given link
https://brainly.com/question/14296509
#SPJ11
Venus has a mass of 4.87 1024 kg and a radius of 6.05 106 m. Assume it is a uniform solid sphere. The distance of Venus from the Sun is 1.08 1011 m. (Assume Venus completes a single rotation in 5.83 103 hours and orbits the Sun once every 225 Earth days.)
(a) What is the rotational kinetic energy of Venus on its axis? 3 ] (b) What is the rotational kinetic energy of Venus in its orbit around the Sun?
(a) The rotational kinetic energy of Venus on its axis is approximately 2.45 × 10^29 joules.
(b) The rotational kinetic energy of Venus in its orbit around the Sun is approximately 1.13 × 10^33 joules.
To calculate the rotational kinetic energy of Venus on its axis, we need to use the formula:
Rotational Kinetic Energy (K_rot) = (1/2) * I * ω^2
where:
I is the moment of inertia of Venus
ω is the angular velocity of Venus
The moment of inertia of a uniform solid sphere is given by the formula:
I = (2/5) * M * R^2
where:
M is the mass of Venus
R is the radius of Venus
(a) Rotational kinetic energy of Venus on its axis:
Given data:
Mass of Venus (M) = 4.87 * 10^24 kg
Radius of Venus (R) = 6.05 * 10^6 m
Angular velocity (ω) = (2π) / (time taken for one rotation)
Time taken for one rotation = 5.83 * 10^3 hours
Convert hours to seconds:
Time taken for one rotation = 5.83 * 10^3 hours * 3600 seconds/hour = 2.098 * 10^7 seconds
ω = (2π) / (2.098 * 10^7 seconds)
Calculating the moment of inertia:
I = (2/5) * M * R^2
Substituting the given values:
I = (2/5) * (4.87 * 10^24 kg) * (6.05 * 10^6 m)^2
Calculating the rotational kinetic energy:
K_rot = (1/2) * I * ω^2
Substituting the values of I and ω:
K_rot = (1/2) * [(2/5) * (4.87 * 10^24 kg) * (6.05 * 10^6 m)^2] * [(2π) / (2.098 * 10^7 seconds)]^2
Now we can calculate the value.
The rotational kinetic energy of Venus on its axis is approximately 2.45 × 10^29 joules.
(b) To calculate the rotational kinetic energy of Venus in its orbit around the Sun, we use a similar formula:
K_rot = (1/2) * I * ω^2
where:
I is the moment of inertia of Venus (same as in part a)
ω is the angular velocity of Venus in its orbit around the Sun
The angular velocity (ω) can be calculated using the formula:
ω = (2π) / (time taken for one orbit around the Sun)
Given data:
Time taken for one orbit around the Sun = 225 Earth days
Convert days to seconds:
Time taken for one orbit around the Sun = 225 Earth days * 24 hours/day * 3600 seconds/hour = 1.944 * 10^7 seconds
ω = (2π) / (1.944 * 10^7 seconds)
Calculating the rotational kinetic energy:
K_rot = (1/2) * I * ω^2
Substituting the values of I and ω:
K_rot = (1/2) * [(2/5) * (4.87 * 10^24 kg) * (6.05 * 10^6 m)^2] * [(2π) / (1.944 * 10^7 seconds)]^2
Now we can calculate the value.
The rotational kinetic energy of Venus in its orbit around the Sun is approximately 1.13 × 10^33 joules.
For more such questions on rotational kinetic energy, click on:
https://brainly.com/question/30459585
#SPJ8
Green light has a wavelength of 5.20 × 10−7 m and travels through the air at a speed of 3.00 × 108 m/s.
Calculate the frequency of green light waves with this wavelength. Answer in units of Hz.
Calculate the period of green light waves with this wavelength. Answer in units of s.
To calculate the frequency of green light waves with a wavelength of 5.20 × 10^(-7) m, we can use the formula: Frequency (f) = Speed of light (c) / Wavelength (λ). Therefore, the period of green light waves with a wavelength of 5.20 × 10^(-7) m is approximately 1.73 × 10^(-15) s.
Plugging in the values:
Frequency = 3.00 × 10^8 m/s / 5.20 × 10^(-7) m
Frequency ≈ 5.77 × 10^14 Hz
Therefore, the frequency of green light waves with a wavelength of 5.20 × 10^(-7) m is approximately 5.77 × 10^14 Hz.
To calculate the period of green light waves with this wavelength, we can use the formula:
Period (T) = 1 / Frequency (f)
Plugging in the value of frequency:
Period = 1 / 5.77 × 10^14 Hz
Period ≈ 1.73 × 10^(-15) s
Therefore, the period of green light waves with a wavelength of 5.20 × 10^(-7) m is approximately 1.73 × 10^(-15) s.
To learn more about, frequency, click here, https://brainly.com/question/2140860
#SPJ11
A straight wire with length 2320cm carries a current 20A which is directed to the right and is perpendicular to an unknown uniform magnetic field B. A magnetic
force 31pN acts on a conductor which is directed downwards. A. Determine the magnitude and the direction of the magnetic field in the region
through which the current passes. B. If the angle between the current and the magnetic field is 54 this time, what would
be the new value of the magnitude of the new magnetic force?
a. The magnitude of the magnetic field is [tex]2.84 * 10^(^-^1^1^) Tesla.[/tex]
b. The new value of the magnitude of the magnetic force is [tex]4.49 * 10^(^-^1^1^)[/tex] Newtons.
How do we calculate?a.
F_ = BILsinθ
F_ = magnetic force,
B = magnetic field
I = current,
L = length of the wire,
θ = angle between the current and the magnetic field.
Current (I) = 20 A
Length of wire (L) = 2320 cm = 23.20 m
Magnetic force (F) = 31 pN = 31 x 10^(-12) N
B = F/ (ILsinθ)
B = ([tex]31 * 10^(^-^1^2)[/tex]) N) / (20 A x 23.20 m x sin(90°))
B = [tex]2.84 * 10^(^-^1^1^)[/tex] T
b.
F' = BILsinθ'
F' = ([tex]2.84 * 10^(^-^1^1^)[/tex]T) x (20 A) x (23.20 m) x sin(54°)
F' = 4.49 x 10^(-11) N
Learn more about magnetic field at:
https://brainly.com/question/14411049
#SPJ4
Which type of force exists between nucleons? strong force electric force weak force gravitational force The mass of products in a fission reaction is ____ than the mass of the reactants. much less slightly less much more slighty more
The type of force that exists between nucleons is the strong force. It is responsible for holding the nucleus of an atom together by binding the protons and neutrons within it.
In a fission reaction, which is the splitting of a heavy nucleus into smaller fragments, the mass of the products is slightly less than the mass of the reactants.
This phenomenon is known as mass defect. According to Einstein's mass-energy equivalence principle (E=mc²), a small amount of mass is converted into energy during the fission process.
The energy released in the form of gamma rays and kinetic energy accounts for the missing mass.
Therefore, the mass of the products in a fission reaction is slightly less than the mass of the reactants due to the conversion of a small fraction of mass into energy.
Learn more about force at: https://brainly.com/question/12785175
#SPJ11
Two identical sinusoidal waves with wavelengths of 3 m travel in the same
direction at a speed of 100 m/s. If both waves originate from the same starting
position, but with time delay At, and the resultant amplitude A_res = V3 A then At
will be equal to:
Two identical sinusoidal waves with wave lengths of 3.00 m travel in the same direction at a speed of 2.00 m/s. The second wave originates from the same point as the first, but at a later time. The minimum possible time interval between the starting moments of the two waves is approximately 0.2387 seconds.
To determine the minimum possible time interval between the starting moments of the two waves, we need to consider their phase difference and the condition for constructive interference.
Let's analyze the problem step by step:
Given:
Wavelength of the waves: λ = 3.00 m
Wave speed: v = 2.00 m/s
Amplitude of the resultant wave: A_res = A (same as the amplitude of each initial wave)
First, we can calculate the frequency of the waves using the formula v = λf, where v is the wave speed and λ is the wavelength:
f = v / λ = 2.00 m/s / 3.00 m = 2/3 Hz
The time period (T) of each wave can be determined using the formula T = 1/f:
T = 1 / (2/3 Hz) = 3/2 s = 1.5 s
Now, let's assume that the second wave starts at a time interval Δt after the first wave.
The phase difference (Δφ) between the two waves can be calculated using the formula Δφ = 2πΔt / T, where T is the time period:
Δφ = 2πΔt / (1.5 s)
According to the condition for constructive interference, the phase difference should be an integer multiple of 2π (i.e., Δφ = 2πn, where n is an integer) for the resultant amplitude to be the same as the initial wave amplitude.
So, we can write:
2πΔt / (1.5 s) = 2πn
Simplifying the equation:
Δt = (1.5 s / 2π) × n
To find the minimum time interval Δt, we need to find the smallest integer n that satisfies the condition.
Since Δt represents the time interval, it should be a positive quantity. Therefore,the smallest positive integer value for n would be 1.
Substituting n = 1:
Δt = (1.5 s / 2π) × 1
Δt = 0.2387 s (approximately)
Therefore, the minimum possible time interval between the starting moments of the two waves is approximately 0.2387 seconds.
To learn more about amplitude visit: https://brainly.com/question/3613222
#SPJ11
The question should be :
Two identical sinusoidal waves with wave lengths of 3.00 m travel in the same direction at a speed of 2.00 m/s. The second wave originates from the same point as the first, but at a later time. The amplitude of the resultant wave is the same as that of each of the two initial waves. Determine the minimum possible time interval (in sec) between the starting moments of the two waves.
Part A What percentage of all the molecules in the glass are water? Express your answer using six significant figures. D | ΑΣΦ VO ? MAREH nwater Submit Request Answer % Assume the total number of molecules in a glass of liquid is about 1,000,000 million trillion. One million trillion of these are molecules of some poison, while 999,999 million trillion of these are water molecules.
Assuming the total number of molecules in a glass of liquid is about 1,000,000 million trillion.
One million trillion of these are molecules of some poison, while 999,999 million trillion of these are water molecules.
Express your answer using six significant figures. To determine the percentage of all the molecules in the glass that are water, we need to use the following formula: % of water = (number of water molecules/total number of molecules) × 100.
To know more about liquid visit:
https://brainly.com/question/20922015
#SPJ11
billy, a student, sounds two tuning forks that are supposed to be tuned to A 440.0hz. in which one is correct. When sounded with the other tuning ford, he hears a periodic volume change at a rate of 24 times in 6.0s
a) In physics, what is this called?
b) What would be the possible frequencies for the tuning fork that happens to be out of tune?
In physics, the periodic volume change heard when two sound waves with nearly similar frequencies interfere with each other is called beats. The frequency of the out-of-tune tuning fork is 222 Hz.
When two sound waves interfere with each other, the periodic volume change heard when two sound waves with nearly similar frequencies interfere with each other is called beats.
The frequency of the out-of-tune tuning fork can be calculated from the number of beats heard in a given time. Billy hears 24 beats in 6.0 seconds. Therefore, the frequency of the out of tune tuning fork is 24 cycles / 6.0 seconds = 4 cycles per second.
In one cycle, there are two sounds: one of the tuning fork, which is at a frequency of 440.0 Hz, and the other is at the frequency of the out-of-tune tuning fork (f). The frequency of the out-of-tune tuning fork can be calculated by the formula; frequency of the out-of-tune tuning fork (f) = (Beats per second + 440 Hz) / 2.
Substituting the values, we get;
frequency of the out-of-tune tuning fork (f) = (4 Hz + 440 Hz) / 2 = 222 Hz.
Learn more about frequency:
https://brainly.com/question/14567997
#SPJ11
Singly charged uranium-238 ions are accelerated through a potential difference of 2.00kV and enter a uniform magnetic field of magnitude 1.20 T directed perpendicular to their velocities.(c) What If? How does the ratio of these path radii depend on the accelerating voltage?
The ratio of the path radii for the uranium-238 ions is not affected by the accelerating voltage. The ratio is solely determined by the mass of the ions and the magnitude of the magnetic field.
The ratio of the path radii for singly charged uranium-238 ions depends on the accelerating voltage.
When a charged particle enters a uniform magnetic field perpendicular to its velocity, it experiences a force called the magnetic force. This force acts as a centripetal force, causing the particle to move in a circular path.
The magnitude of the magnetic force is given by the equation:
F = qvB
Where:
F is the magnetic force
q is the charge of the particle
v is the velocity of the particle
B is the magnitude of the magnetic field
In this case, the uranium-238 ions have a charge of +1 (since they are singly charged). The magnetic force acting on the ions is equal to the centripetal force:
qvB = mv²/r
Where:
m is the mass of the uranium-238 ion
v is the velocity of the ion
r is the radius of the circular path
We can rearrange this equation to solve for the radius:
r = mv/qB
The velocity of the ions can be determined using the equation for the kinetic energy of a charged particle:
KE = (1/2)mv²
The kinetic energy can also be expressed in terms of the accelerating voltage (V) and the charge (q) of the ion:
KE = qV
We can equate these two expressions for the kinetic energy:
(1/2)mv² = qV
Solving for v, we get:
v = sqrt(2qV/m)
Substituting this expression for v into the equation for the radius (r), we have:
r = m(sqrt(2qV/m))/qB
Simplifying, we get:
r = sqrt(2mV)/B
From this equation, we can see that the ratio of the path radii is independent of the charge (q) of the ions and the mass (m) of the ions.
Therefore, the ratio of the path radii is independent of the accelerating voltage (V).
Learn more about voltage
https://brainly.com/question/32002804
#SPJ11
If the period of a 70.0-cm-long simple pendulum is 1.68 s, what
is the value of g at the location of the pendulum?
The value of g at the location of the pendulum is approximately 9.81 m/s², given a period of 1.68 s and a length of 70.0 cm.
The period of a simple pendulum is given by the formula:
T = 2π√(L/g),
where:
T is the period,L is the length of the pendulum, andg is the acceleration due to gravity.Rearranging the formula, we can solve for g:
g = (4π²L) / T².
Substituting the given values:
L = 70.0 cm = 0.70 m, and
T = 1.68 s,
we can calculate the value of g:
g = (4π² * 0.70 m) / (1.68 s)².
g ≈ 9.81 m/s².
Therefore, the value of g at the location of the pendulum is approximately 9.81 m/s².
To learn more about acceleration due to gravity, Visit:
https://brainly.com/question/88039
#SPJ11
How do the vibrational and rotational levels of heavy hydrogen (D²) molecules compare with those of H² molecules?
The vibrational and rotational levels of heavy hydrogen (D²) molecules are similar to those of H² molecules, but with some differences due to the difference in mass between hydrogen (H) and deuterium (D).
The vibrational and rotational levels of diatomic molecules are governed by the principles of quantum mechanics. In the case of H² and D² molecules, the key difference lies in the mass of the hydrogen isotopes.
The vibrational energy levels of a molecule are determined by the reduced mass, which takes into account the masses of both atoms. The reduced mass (μ) is given by the formula:
μ = (m₁ * m₂) / (m₁ + m₂)
For H² molecules, since both atoms are hydrogen (H), the reduced mass is equal to the mass of a single hydrogen atom (m_H).
For D² molecules, the reduced mass will be different since deuterium (D) has twice the mass of hydrogen (H).
Therefore, the vibrational energy levels of D² molecules will be shifted to higher energies compared to H² molecules. This is because the heavier mass of deuterium leads to a higher reduced mass, resulting in higher vibrational energy levels.
On the other hand, the rotational energy levels of diatomic molecules depend only on the moment of inertia (I) of the molecule. The moment of inertia is given by:
I = μ * R²
Since the reduced mass (μ) changes for D² molecules, the moment of inertia will also change. This will lead to different rotational energy levels compared to H² molecules.
The vibrational and rotational energy levels of heavy hydrogen (D²) molecules, compared to H² molecules, are affected by the difference in mass between hydrogen (H) and deuterium (D). The vibrational energy levels of D² molecules are shifted to higher energies due to the increased mass, resulting in higher vibrational states.
Similarly, the rotational energy levels of D² molecules will differ from those of H² molecules due to the change in moment of inertia resulting from the different reduced mass. These differences in energy levels arise from the fundamental principles of quantum mechanics and have implications for the spectroscopy and behavior of heavy hydrogen molecules compared to regular hydrogen molecules.
To know more about hydrogen ,visit:
https://brainly.com/question/24433860
#SPJ11
A charge Q is located some distance L from the center of a wire. A small charge −q with mass m is attached to the wire such that it can move along the wire but not perpendicular to it. The small charge −q is moved some small amount Δx<
The work done on the small charge -q when it is moved a small distance Δx along the wire can be determined by substituting the force equation into the work equation and solving for W
When the small charge -q is moved a small distance Δx along the wire, it experiences a force due to the electric field generated by the charge Q.
The direction of this force depends on the relative positions of the charges and their charges' signs. Since the small charge -q is negative, it will experience a force in the opposite direction of the electric field.
Assuming the small charge -q moves in the same direction as the wire, the work done on the charge can be calculated using the formula:
Work (W) = Force (F) × Displacement (Δx)
The force acting on the charge is given by Coulomb's Law:
Force (F) = k * (|Q| * |q|) / (L + Δx)²
Here, k is the electrostatic constant and |Q| and |q| represent the magnitudes of the charges.
Thus, the work done on the small charge -q when it is moved a small distance Δx along the wire can be determined by substituting the force equation into the work equation and solving for W.
It's important to note that the above explanation assumes the charge Q is stationary, and there are no other external forces acting on the small charge -q.
Learn more about work done from the given link
https://brainly.com/question/25573309
#SPJ11