Answer:
(a) Fn = 0.33 N
(b) Pn = 263.22 x 10³ Pa = 263.22 KPa
Explanation:
(a)
First, we need to calculate the total force exerted by all nails on the magician. This force must be equal to the weight of magician:
F = W
where,
F = Total Force exerted by all nails = ?
W = Weight of magician = mg = (64.3 kg)(9.8 m/s²) = 630.14 N
Therefore,
F = 630.14 N
Now, we calculate the force exerted by each nail:
Fn = F/n
where,
Fn = force exerted by each nail = ?
n = Total no. of nails = 1900
Therefore,
Fn = 630.14 N/1900
Fn = 0.33 N
(b)
The pressure exerted by each nail is given as:
Pn = Fn/An
where,
Pn = Pressure exerted by each nail = ?
An = Area of contact for each nail = 1.26 x 10⁻⁶ m²
Therefore,
Pn = 0.33 N/1.26 x 10⁻⁶ m²
Pn = 263.22 x 10³ Pa = 263.22 KPa
A charge of 87.6 pC is uniformly distributed on the surface of a thin sheet of insulating material that has a total area of 65.2 cm^2. A Gaussian surface encloses a portion of the sheet of charge. If the flux through the Gaussian surface is 9.20 N⋅m^2/C, what area of the sheet is enclosed by the Gaussian surface?
Answer:
60.8 cm²
Explanation:
The charge density, σ on the surface is σ = Q/A where q = charge = 87.6 pC = 87.6 × 10⁻¹² C and A = area = 65.2 cm² = 65.2 × 10⁻⁴ m².
σ = Q/A = 87.6 × 10⁻¹² C/65.2 × 10⁻⁴ m² = 1.34 × 10⁻⁸ C/m²
Now, the charge through the Gaussian surface is q = σA' where A' is the charge in the Gaussian surface.
Since the flux, Ф = 9.20 Nm²/C and Ф = q/ε₀ for a closed Gaussian surface
So, q = ε₀Ф = σA'
ε₀Ф = σA'
making A' the area of the Gaussian surface the subject of the formula, we have
A' = ε₀Ф/σ
A' = 8.854 × 10⁻¹² F/m × 9.20 Nm²/C ÷ 1.34 × 10⁻⁸ C/m²
A' = 81.4568/1.34 × 10⁻⁴ m²
A' = 60.79 × 10⁻⁴ m²
A' ≅ 60.8 cm²
The flux through the Gaussian surface is 9.20 N⋅m^2/C then the surface area of the Gaussian Sheet is 60.76 square cm.
Charge and Charge DensityA certain amount of electrons in excess or defect is called a charge. Charge density is the amount of charge distributed over per unit of volume.
Given that, for a thin sheet of insulating material, the charge Q is 87.6 pC and surface area A is 65.2 square cm. Then the charge density for a thin sheet is given below.
[tex]\sigma = \dfrac {Q}{A}[/tex]
[tex]\sigma = \dfrac {87.6\times 10^{-12}}{65;.2\times 10^{-4}}[/tex]
[tex]\sigma = 1.34\times 10^{-8} \;\rm C/m^2[/tex]
Thus the charge density for a thin sheet of insulating material is [tex]1.34\times 10^{-8} \;\rm C/m^2[/tex].
Now, the flux through the Gaussian surface is 9.20 N⋅m^2/C. The charge over the Gaussian Surface is given as below.
[tex]Q' = \sigma A'[/tex]
Where Q' is the charge at the Gaussian Surface, A' is the surface area of the Gaussian surface and [tex]\sigma[/tex] is the charge density.
For the closed Gaussian Surface, Flux is given below.
[tex]\phi = \dfrac {Q'}{\epsilon_\circ}[/tex]
Hence the charge can be written as,
[tex]Q' = \phi\epsilon_\circ[/tex]
So the charge can be given as below.
[tex]Q' = \phi\epsilon_\circ = \sigma A'[/tex]
Then the surface area of the Gaussian surface is given below.
[tex]A' = \dfrac {\phi\epsilon_\circ}{\sigma}[/tex]
Substituting the values in the above equation,
[tex]A' = \dfrac {9.20 \times 8.85\times 10^{-12}}{1.38\times 10^{-8}}[/tex]
[tex]A' =0.006076\;\rm m^2[/tex]
[tex]A' = 60.76 \;\rm cm^2[/tex]
Hence we can conclude that the area of the Gaussian Surface is 60.76 square cm.
To know more about the charge and charge density, follow the link given below.
https://brainly.com/question/8532098.
When a particular wire is vibrating with a frequency of 6.3 Hz, a transverse wave of wavelength 53.3 cm is produced. Determine the speed of wave pulses along the wire.
Answer:
335.79cm/s
Explanation:
When a transverse wave of wavelength λ is produced during the vibration of a wire, the frequency(f), and the speed(v) of the wave pulses are related to the wavelength as follows;
v = fλ ------------------(ii)
From the question;
f = 6.3Hz
λ = 53.3cm
Substitute these values into equation (i) as follows;
v = 6.3 x 53.3
v = 335.79cm/s
Therefore, the speed of the wave pulses along the wire is 335.79cm/s
Observe the process by which the grey and the red spheres are charged using the electrophorus. After each sphere is first charged, what are their charges
Answer:
The gray spheres is negatively charged while the red is positively charged
Explanation:
This is because theelectrophorus becomes less positive once it pulls some electrons away from the red sphere, but, the electrophorus is replaced on the slab and recharged by grounding it before it proceeds to charge the grey sphere, thereby giving it electrons and making it negatively charged
Answer:
The gray sphere has a positive charge and the red sphere has a positive charge.
g At some point the road makes a right turn with a radius of 117 m. If the posted speed limit along this part of the highway is 25.1 m/s, how much should Raquel bank the turn so that a vehicle traveling at the posted speed limit can make the turn without relying on the frictional force between the tires and the road
Answer:
Ф = 28.9°
Explanation:
given:
radius (r) = 117m
velocity (v) = 25.1 m/s
required: angle Ф
Ф = inv tan (v² / (r * g)) we know that g = 9.8
Ф = inv tan (25.1² / (117 * 9.8))
Ф = 28.9°
A ball is thrown directly downward with an initial speed of 7.95 m/s, from a height of 29.0 m. After what time interval does it strike the ground?
Answer: after 1.75 seconds
Explanation:
The only force acting on the ball is the gravitational force, so the acceleration will be:
a = -9.8 m/s^2
the velocity can be obtained by integrating over time:
v = -9.8m/s^2*t + v0
where v0 is the initial velocity; v0 = -7.95 m/s.
v = -9.8m/s^2*t - 7.95 m/s.
For the position we integrate again:
p = -4.9m/s^2*t^2 - 7.95 m/s*t + p0
where p0 is the initial position: p0 = 29m
p = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Now we want to find the time such that the position is equal to zero:
0 = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Then we solve the Bhaskara's equation:
[tex]t = \frac{7.95 +- \sqrt{7.95^2 +4*4.9*29} }{-2*4.9} = \frac{7.95 +- 25.1}{9.8}[/tex]
Then the solutions are:
t = (7.95 + 25.1)/(-9.8) = -3.37s
t = (7.95 - 25.1)/(-9.8) = 1.75s
We need the positive time, then the correct answer is 1.75s
A 150m race is run on a 300m circular track of circumference. Runners start running from the north and turn west until reaching the south. What is the magnitude of the displacement made by the runners?
Answer:
95.5 m
Explanation:
The displacement is the position of the ending point relative to the starting point.
In this case, the magnitude of the displacement is the diameter of the circular track.
d = 300 m / π
d ≈ 95.5 m
A uniform crate C with mass mC is being transported to the left by a forklift with a constant speed v1. What is the magnitude of the angular momentum of the crate about point A, that is, the point of contact between the front tire of the forklift and the ground
Answer:
The angular momentum of the crate is [tex]M_{C} V_{1} d[/tex]
Explanation:
mass of the crate = [tex]M_{C}[/tex]
speed of forklift = [tex]V_{1}[/tex]
The distance between the center of the mass and the point A = d
Recall that the angular moment is the moment of the momentum.
[tex]L = P*d[/tex] ..... equ 1
where L is the angular momentum,
P is the momentum of the system,
d is the perpendicular distance between the crate and the point on the axis about which the momentum acts. It is equal to d from the image
Also, we know that the momentum P is the product of mass and velocity
P = mv ....equ 2
in this case, the mass = [tex]M_{C}[/tex]
the velocity = [tex]V_{1}[/tex]
therefore, the momentum P = [tex]M_{C}[/tex][tex]V_{1}[/tex]
we substitute equation 2 into equation 1 to give
[tex]L = M_{C} V_{1} d[/tex]
An asteroid that has an orbit with a semi-major axis of 4 AU will have an orbital period of about ______ years.
Answer:
16 years.
Explanation:
Using Kepler's third Law.
P2=D^3
P=√d^3
Where P is the orbital period and d is the distance from the sun.
From the question the semi major axis of the asteroid is 4 AU= distance. The distance is always express in astronomical units.
P=?
P= √4^3
P= √256
P= 16 years.
Orbital period is 16 years.
A force of 44 N will stretch a rubber band 88 cm (0.080.08 m). Assuming that Hooke's law applies, how far will aa 11-N force stretch the rubber band? How much work does it take to stretch the rubber band this far?
Answer:
The rubber band will be stretched 0.02 m.
The work done in stretching is 0.11 J.
Explanation:
Force 1 = 44 N
extension of rubber band = 0.080 m
Force 2 = 11 N
extension = ?
According to Hooke's Law, force applied is proportional to the extension provided elastic limit is not extended.
F = ke
where k = constant of elasticity
e = extension of the material
F = force applied.
For the first case,
44 = 0.080K
K = 44/0.080 = 550 N/m
For the second situation involving the same rubber band
Force = 11 N
e = 550 N/m
11 = 550e
extension e = 11/550 = 0.02 m
The work done to stretch the rubber band this far is equal to the potential energy stored within the rubber due to the stretch. This is in line with energy conservation.
potential energy stored = [tex]\frac{1}{2}ke^{2}[/tex]
==> [tex]\frac{1}{2}* 550* 0.02^{2}[/tex] = 0.11 J
The potential energy function
U(x,y)=A[(1/x2) + (1/y2)] describes a conservative force, where A>0.
Derive an expression for the force in terms of unit vectors i and j.
Answer:
[tex]F=-2A[\frac{1}{x^3}\hat{i}+\frac{1}{y^3}\hat{j}][/tex]
Explanation:
You have the following potential energy function:
[tex]U(x,y)=A[\frac{1}{x^2}+\frac{1}{y^2}}][/tex] (1)
A > 0 constant
In order to find the force in terms of the unit vectors, you use the gradient of the potential function:
[tex]\vec{F}=\bigtriangledown U(x,y)=\frac{\partial}{\partial x}U\hat{i}+\frac{\partial}{\partial y}U\hat{j}[/tex] (2)
Then, you replace the expression (1) into the expression (2) and calculate the partial derivatives:
[tex]\vec{F}=A\frac{\partial}{\partial x}[\frac{1}{x^2}+\frac{1}{y^2}]} \hat{i}+A\frac{\partial}{\partial x}[\frac{1}{x^2}+\frac{1}{y^2}]\hat{j}\\\\\vec{F}=A(-2x^{-3})\hat{i}+A(-2y^{-3})\hat{j}\\\\F=-2A[\frac{1}{x^3}\hat{i}+\frac{1}{y^3}\hat{j}][/tex](3)
The result obtained in (3) is the force expressed in terms of the unit vectors, for the potential energy function U(x,y).
g A change in the initial _____ of a projectile changes the range and maximum height of the projectile.
Answer:
Velocity.
Explanation:
Projectile motion is characterized as the motion that an object undergoes when it is thrown into the air and it is only exposed to acceleration due to gravity.
As per the question, 'any change in the initial velocity of the projectile(object having gravity as the only force) would lead to a change in the range as well as the maximum height of the projectile.' To illustrate numerically:
Horizontal range: As per expression:
R= ([tex]u^{2}[/tex]*sin2θ)/g
the range depending on the square of the initial velocity.
Maximum height: As per expression:
H= ([tex]u^{2}[/tex] * [tex]sin^{2}[/tex]θ )/2g
the maximum distance also depends upon square of the initial velocity.
Two objects attract each other with a gravitational force of magnitude 1.02 10-8 N when separated by 19.7 cm. If the total mass of the two objects is 5.14 kg, what is the mass of each
Answer:
The two masses are 3.39 Kg and 1.75 Kg
Explanation:
The gravitational force of attraction between two bodies is given by the formula;
F = Gm₁m₂/d²
where G is the gravitational force constant = 6.67 * 10⁻¹¹ Nm²Kg⁻²
m₁ = mass of first object; m₂ = mass of second object; d = distance of separation between the objects
Further calculations are provided in the attachment below
The interference of two sound waves of similar amplitude but slightly different frequencies produces a loud-soft-loud oscillation we call __________.
a. the Doppler effect
b. vibrato
c. constructive and destructive interference
d. beats
Answer:
the correct answer is d Beats
Explanation:
when two sound waves interfere time has different frequencies, the result is the sum of the waves is
y = 2A cos 2π (f₁-f₂)/2 cos 2π (f₁ + f₂)/2
where in this expression the first part represents the envelope and the second part represents the pulse or beatings of the wave.
When examining the correct answer is d Beats
We learned that light travels more slowly in glass than in air. Does this contradict the theory of relativity?
Answer:
Yes.
Explanation:
Law of relativity in relation to light states that the speed of light in a vacuum does not depend on all the motion of the observers and that all motion must be defined relative to a frame of reference and that space and time are relative, rather than absolute concepts. This was formulated by Albert Einstein in 1905.
Light travels more slowly in gas than in air because it interacts with atoms of glass that made it way through it and the refractive index of glass is more than air. This does contradict the theory of relativity as the speed of lights travel slower in glass because it's motion is slow and it is not relative.
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s
Answer:
389 kg
Explanation:
The computation of mass is shown below:-
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
Where K indicates spring constant
m indicates mass
For the new time period
[tex]T^' = 2\pi \sqrt{\frac{m'}{k} }[/tex]
Now, we will take 2 ratios of the time period
[tex]\frac{T}{T'} = \sqrt{\frac{m}{m'} }[/tex]
[tex]\frac{1.50}{2.00} = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]0.5625 = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]m' = \frac{0.500}{0.5625}[/tex]
= 0.889 kg
Since mass to be sum that is
= 0.889 - 0.500
0.389 kg
or
= 389 kg
Therefore for computing the mass we simply applied the above formula.
The mass added to the object to change the period to 2.00 s is 0.389 kg and this can be determined by using the formula of the time period.
Given :
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s.
The formula of the time period is given by:
[tex]\rm T = 2\pi\sqrt{\dfrac{m}{K}}[/tex] ---- (1)
where m is the mass and K is the spring constant.
The new time period is given by:
[tex]\rm T'=2\pi\sqrt{\dfrac{m'}{K}}[/tex] ---- (2)
where m' is the total mass after the addition and K is the spring constant.
Now, divide equation (1) by equation (2).
[tex]\rm \dfrac{T}{T'}=\sqrt{\dfrac{m}{m'}}[/tex]
Now, substitute the known terms in the above expression.
[tex]\rm \dfrac{1.50}{2}=\sqrt{\dfrac{0.5}{m'}}[/tex]
Simplify the above expression in order to determine the value of m'.
[tex]\rm m'=\dfrac{0.5}{0.5625}[/tex]
m' = 0.889 Kg
Now, the mass added to the object to change the period to 2.00 s is given by:
m" = 0.889 - 0.500
m" = 0.389 Kg
For more information, refer to the link given below:
https://brainly.com/question/2144584
The objective lens of a microscope has a focal length of 5.5mm. Part A What eyepiece focal length will give the microscope an overall angular magnification of 300
Complete Question
The distance between the objective and eyepiece lenses in a microscope is 19 cm . The objective lens has a focal length of 5.5 mm .
What eyepiece focal length will give the microscope an overall angular magnification of 300?
Answer:
The eyepiece focal length is [tex]f_e = 0.027 \ m[/tex]
Explanation:
From the question we are told that
The focal length is [tex]f_o = 5.5 \ mm = -0.0055 \ m[/tex]
This negative sign shows the the microscope is diverging light
The angular magnification is [tex]m = 300[/tex]
The distance between the objective and the eyepieces lenses is [tex]Z = 19 \ cm = 0.19 \ m[/tex]
Generally the magnification is mathematically represented as
[tex]m = [\frac{Z - f_e }{f_e}] [\frac{0.25}{f_0} ][/tex]
Where [tex]f_e[/tex] is the eyepiece focal length of the microscope
Now making [tex]f_e[/tex] the subject of the formula
[tex]f_e = \frac{Z}{1 - [\frac{M * f_o }{0.25}] }[/tex]
substituting values
[tex]f_e = \frac{ 0.19 }{1 - [\frac{300 * -0.0055 }{0.25}] }[/tex]
[tex]f_e = 0.027 \ m[/tex]
Two space ships collide in deep space. Spaceship P, the projectile, has a mass of 4M,
while the target spaceship T has a mass of M. Spaceship T is initially at rest and the
collision is elastic. If the final velocity of Tis 8.1 m/s, what was the initial velocity of
P?
Answer:
The initial velocity of spaceship P was u₁ = 5.06 m/s
Explanation:
In an elastic collision between two bodies the expression for the final velocity of the second body is given as follows:
[tex]V_{2} = \frac{(m_{2}-m_{1}) }{(m_{1}+m_{2})}u_{2} + \frac{2m_{1} }{(m_{1}+m_{2})}u_{1}[/tex]
Here, subscript 1 is used for spaceship P and subscript 2 is used for spaceship T. In this equation:
V₂ = Final Speed of Spaceship T = 8.1 m/s
m₁ = mass of spaceship P = 4 M
m₂ = mass of spaceship T = M
u₁ = Initial Speed of Spaceship P = ?
u₂ = Initial Speed of Spaceship T = 0 m/s
Using these values in the given equation, we get:
[tex]8.1 m/s = \frac{M-4M }{4M+M}(0 m/s) + \frac{2(4M) }{4M+M}u_{1}[/tex]
8.1 m/s = (8 M/5 M)u₁
u₁ = (5/8)(8.1 m/s)
u₁ = 5.06 m/s
A dipole moment is placed in a uniform electric field oriented along an unknown direction. The maximum torque applied to the dipole is equal to 0.1 N.m. When the dipole reaches equilibrium its potential energy is equal to -0.2 J. What was the initial angle between the direction of the dipole moment and the direction of the electric field?
Answer:
θ = 180
Explanation:
When an electric dipole is placed in an electric field, there is a torque due to the electric force
τ = p x E
by rotating the dipole there is a change in potential energy
ΔU = ∫ τ dθ
ΔU = p E (cos θ₂ - cos θ₁)
when the dipole starts from an angle to the equilibrium position for θ = 0
ΔU = pE (cos θ - cos 0)
cos θ = 1 + DU / pE)
let's apply this expression to our case, the change in potential energy is ΔU = -0.2J
let's calculate
cos θ = 1 -0.2 / 0.1
cos θ = -1
θ = 180
The rock and meterstick balance at the 25-cm mark, as shown in the sketch. The meterstick has a mass of 1 kg. What must be the mass of the rock? (Show work).
Answer:
1 kgExplanation:
Check the diagram attached below for the diagram.
Let the weight of the rock be W and the mass of the meter stick be M. Note that the mass of the meter stick will be placed at the middle of the meter stick i.e at the 50cm mark
Using the principle of moment to calculate the weight of the rock. It states that the sum of clockwise moments is equal to the sum of anti clockwise moment.
Moment = Force * perpendicular distance
The meterstick acts in the clockwise direction while the rock acys in the anti clockwise direction
Clockwise moment = 1kg * 25 = 25kg/cm
Anticlockwise moment = W * 25cm = 25W kg/cm
Equating both moments of forces
25W = 25
W = 25/23
W = 1 kg
The mass of the rock is also 1 kg
A 10 gauge copper wire carries a current of 23 A. Assuming one free electron per copper atom, calculate the magnitude of the drift velocity of the electrons.
Question:
A 10 gauge copper wire carries a current of 15 A. Assuming one free electron per copper atom, calculate the drift velocity of the electrons. (The cross-sectional area of a 10-gauge wire is 5.261 mm².)
Answer:
3.22 x 10⁻⁴ m/s
Explanation:
The drift velocity (v) of the electrons in a wire (copper wire in this case) carrying current (I) is given by;
v = [tex]\frac{I}{nqA}[/tex]
Where;
n = number of free electrons per cubic meter
q = electron charge
A = cross-sectional area of the wire
First let's calculate the number of free electrons per cubic meter (n)
Known constants:
density of copper, ρ = 8.95 x 10³kg/m³
molar mass of copper, M = 63.5 x 10⁻³kg/mol
Avogadro's number, Nₐ = 6.02 x 10²³ particles/mol
But;
The number of copper atoms, N, per cubic meter is given by;
N = (Nₐ x ρ / M) -------------(ii)
Substitute the values of Nₐ, ρ and M into equation (ii) as follows;
N = (6.02 x 10²³ x 8.95 x 10³) / 63.5 x 10⁻³
N = 8.49 x 10²⁸ atom/m³
Since there is one free electron per copper atom, the number of free electrons per cubic meter is simply;
n = 8.49 x 10²⁸ electrons/m³
Now let's calculate the drift electron
Known values from question:
A = 5.261 mm² = 5.261 x 10⁻⁶m²
I = 23A
q = 1.6 x 10⁻¹⁹C
Substitute these values into equation (i) as follows;
v = [tex]\frac{I}{nqA}[/tex]
v = [tex]\frac{23}{8.49*10^{28} * 1.6 *10^{-19} * 5.261*10^{-6}}[/tex]
v = 3.22 x 10⁻⁴ m/s
Therefore, the drift electron is 3.22 x 10⁻⁴ m/s
the density of gold is 19 300kg/m^3. what is the mass of gold cube with the length 0.2015m?
Answer:
The mass is [tex]157.87m^3[/tex]Explanation:
Given data
length of cube= 0.2015 m
density = 19300 kg/m^3.
But the volume of cube is given as [tex]l*l*l= l^3[/tex]
[tex]volume -of- cube= 0.2015*0.2015*0.2015= 0.00818 m^3[/tex]
The density is expressed as = mass/volume
[tex]mass=19300*0.00818= 157.87m^3[/tex]
A very long, solid cylinder with radius R has positive charge uniformly distributed throughout it, with charge per unit volume \rhorho.
(a) Derive the expression for the electric field inside the volume at a distance r from the axis of the cylinder in terms of the charge density \rhorho.
(b) What is the electric field at a point outside the volume in terms of the charge per unit length \lambdaλ in the cylinder?
(c) Compare the answers to parts (a) and (b) for r = R.
(d) Graph the electric-field magnitude as a function of r from r = 0 to r = 3R.
Answer:
the answers are provided in the attachments below
Explanation:
Gauss law state that the net electric field coming out of a closed surface is directly proportional to the charge enclosed inside the closed surface
Applying Gauss law to the long solid cylinder
A) E ( electric field ) = p*r / 2 * [tex]e_{0}[/tex]
B) E = 2K λ / r
C) Answers from parts a and b are the same
D) attached below
Applying Gauss's law which states that the net electric field in an enclosed surface is directly ∝ to the charge found in the enclosed surface.
A ) The expression for the electric field inside the volume at a distance r
Gauss law : E. A = [tex]\frac{q}{e_{0} }[/tex] ----- ( 1 )
where : A = surface area = 2πrL , q = p(πr²L)
back to equation ( 1 )
E ( electric field ) = p*r / 2 * [tex]e_{0}[/tex]
B) Electric field at point Outside the volume in terms of charge per unit length λ
Given that: linear charge density = area * volume charge density
λ = πR²P
from Gauss's law : E ( 2πrL) = [tex]\frac{q}{e_{0} }[/tex]
∴ E = [tex]\frac{\pi R^{2}P }{2e_{0}r\pi }[/tex] ----- ( 2 )
where : πR²P = λ
Back to equation ( 2 )
E = λ / 2e₀π*r where : k = 1 / 4πe₀
∴ The electric field ( E ) at point outside the volume in terms of charge per unit Length λ
E = 2K λ / r
C) Comparing answers A and B
Answers to part A and B are similar
Hence we can conclude that Applying Gauss law to the long solid cylinder
E ( electric field ) = p*r / 2 * [tex]e_{0}[/tex], E = 2K λ / r also Answers from parts a and b are the same.
Learn more about Gauss's Law : https://brainly.com/question/15175106
An isolated capacitor with capacitance C = 1 µF has a charge Q = 45 µC on its plates.a) What is the energy stored in the capacitor?Now a conductor is inserted into the capacitor. The thickness of the conductor is 1/3 the distance between the plates of the capacitor and is centered inbetween the plates of the capacitor.b) What is the charge on the plates of the capacitor?c) What is the capacitance of the capacitor with the conductor in place?d) What is the energy stored in the capacitor with the conductor in place?
Answer:
a) Energy stored in the capacitor, [tex]E = 1.0125 *10^{-3} J[/tex]
b) Q = 45 µC
c) C' = 1.5 μF
d) [tex]E = 6.75 *10^{-4} J[/tex]
Explanation:
Capacitance, C = 1 µF
Charge on the plates, Q = 45 µC
a) Energy stored in the capacitor is given by the formula:
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{2}\\\\E = 1012.5 *10^{-6}\\\\E = 1.0125 *10^{-3} J[/tex]
b) The charge on the plates of the capacitor will not change
It will still remains, Q = 45 µC
c) Electric field is non zero over (1-1/3) = 2/3 of d
From the relation V = Ed,
The voltage has changed by a factor of 2/3
Since the capacitance is given as C = Q/V
The new capacitance with the conductor in place, C' = (3/2) C
C' = (3/2) * 1μF
C' = 1.5 μF
d) Energy stored in the capacitor with the conductor in place
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1.5* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{3}\\\\E = 675 *10^{-6}\\\\E = 6.75 *10^{-4} J[/tex]
An aging coyote cannot run fast enough to catch a roadrunner. He purchases on eBay a set of jet-powered roller skates, which provide a constant horizontal acceleration of 15.0 m/s2. The coyote starts at rest 70.0 m from the edge of a cliff at the instant the roadrunner zips past in the direction of the cliff.
Required:
a. Determine the minimum constant speed the roadrunner must have to reach the cliff before the coyote. At the edge of the cliff, the roadrunner escapes by making a sudden turn, while the coyote continues straight ahead. The coyote’s skates remain horizontal and continue to operate while he is in flight.
b. The cliff is 100 m above the flat floor of the desert. Determine how far from the base of the cliff the coyote lands.
c. Determine the components of the coyote’s impact velocity
Answer:
a) v_correcaminos = 22.95 m / s , b) x = 512.4 m ,
c) v = (45.83 i ^ -109.56 j ^) m / s
Explanation:
We can solve this exercise using the kinematics equations
a) Let's find the time or the coyote takes to reach the cliff, let's start by finding the speed on the cliff
v² = v₀² + 2 a x
they tell us that the coyote starts from rest v₀ = 0 and its acceleration is a=15 m / s²
v = √ (2 15 70)
v = 45.83 m / s
with this value calculate the time it takes to arrive
v = v₀ + a t
t = v / a
t = 45.83 / 15
t = 3.05 s
having the distance to the cliff and the time, we can find the constant speed of the roadrunner
v_ roadrunner = x / t
v_correcaminos = 70 / 3,05
v_correcaminos = 22.95 m / s
b) if the coyote leaves the cliff with the horizontal velocity v₀ₓ = 45.83 m / s, they ask how far it reaches.
Let's start by looking for the time to reach the cliff floor
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
in this case y = 0 and the height of the cliff is y₀ = 100 m
0 = 100 + 45.83 t - ½ 9.8 t²
t² - 9,353 t - 20,408 = 0
we solve the quadratic equation
t = [9,353 ±√ (9,353² + 4 20,408)] / 2
t = [9,353 ± 13] / 2
t₁ = 11.18 s
t₂ = -1.8 s
Since time must be a positive quantity, the answer is t = 11.18 s
we calculate the horizontal distance traveled
x = v₀ₓ t
x = 45.83 11.18
x = 512.4 m
c) speed when it hits the ground
vₓ = v₀ₓ = 45.83 m / s
we look for vertical speed
v_{y} = [tex]v_{oy}[/tex] - gt
v_{y} = 0 - 9.8 11.18
v_{y} = - 109.56 m / s
v = (45.83 i ^ -109.56 j ^) m / s
1. As you pass a freight truck with a trailer on a highway, you notice that its trailer is bouncing up and down slowly. Is it more likely that the trailer is heavily loaded or nearly empty
Answer:
It's more likely that the trailer is heavily loaded
Explanation:
Due to the fact that the frequency is proportional to the square root of the force constant and inversely proportional to the square root of the mass, it is very likely that the truck would be heavily loaded because the force constant would be the same whether the truck is empty or heavily loaded.
Two people push on a large gate as shown on the view from above in the diagram. If the moment of inertia of the gate is 90 kgm2, what is the resulting angular acceleration of the gate?
Answer:
1ft per second
Explanation:
Physics is on my side!!!!!!!!!!
An ice skater spinning with outstretched arms has an angular speed of 5.0 rad/s . She tucks in her arms, decreasing her moment of inertia by 11 % . By what factor does the skater's kinetic energy change? (Neglect any frictional effects.)
Answer:
K_{f} / K₀ =1.12
Explanation:
This problem must work using the conservation of angular momentum (L), so that the moment is conserved in the system all the forces must be internal and therefore the torque is internal and the moment is conserved.
Initial moment. With arms outstretched
L₀ = I₀ w₀
the wo value is 5.0 rad / s
final moment. After he shrugs his arms
[tex]L_{f}[/tex] = I_{f} w_{f}
indicate that the moment of inertia decreases by 11%
I_{f} = I₀ - 0.11 I₀ = 0.89 I₀
L_{f} = L₀
I_{f} w_{f} = I₀ w₀
w_{f} = I₀ /I_{f} w₀
let's calculate
w_{f} = I₀ / 0.89 I₀ 5.0
w_{f} = 5.62 rad / s
Having these values we can calculate the change in kinetic energy
[tex]K_{f}[/tex] / K₀ = ½ I_{f} w_{f}² (½ I₀ w₀²)
K_{f} / K₀ = 0.89 I₀ / I₀ (5.62 / 5)²
K_{f} / K₀ =1.12
A "laser cannon" of a spacecraft has a beam of cross-sectional area A. The maximum electric field in the beam is 2E. The beam is aimed at an asteroid that is initially moving in the direction of the spacecraft. What is the acceleration of the asteroid relative to the spacecraft if the laser beam strikes the asteroid perpendicularly to its surface, and the surface is not reflecting
Answer:
Acceleration of the asteroid relative to the spacecraft = 2ε[tex]E^{2}[/tex]A/m
Explanation:
The maximum electric field in the beam = 2E
cross-sectional area of beam = A
The intensity of an electromagnetic wave with electric field is
I = cε[tex]E_{0} ^{2}[/tex]/2
for [tex]E_{0}[/tex] = 2E
I = 2cε[tex]E^{2}[/tex] ....equ 1
where
I is the intensity
c is the speed of light
ε is the permeability of free space
[tex]E_{0}[/tex] is electric field
Radiation pressure of an electromagnetic wave on an absorbing surface is given as
P = I/c
substituting for I from above equ 1. we have
P = 2cε[tex]E^{2}[/tex]/c = 2ε[tex]E^{2}[/tex] ....equ 2
Also, pressure P = F/A
therefore,
F = PA ....equ 3
where
F is the force
P is pressure
A is cross-sectional area
substitute equ 2 into equ 3, we have
F = 2ε[tex]E^{2}[/tex]A
force on a body = mass x acceleration.
that is
F = ma
therefore,
a = F/m
acceleration of the asteroid will then be
a = 2ε[tex]E^{2}[/tex]A/m
where m is the mass of the asteroid.
Use Coulomb’s law to derive the dimension for the permittivity of free space.
Answer:
Coulomb's law is:
[tex]F = \frac{1}{4*pi*e0} *(q1*q2)/r^2[/tex]
First, force has units of Newtons, the charges have units of Coulombs, and r, the distance, has units of meters, then, working only with the units we have:
N = (1/{e0})*C^2/m^2
then we have:
{e0} = C^2/(m^2*N)
And we know that N = kg*m/s^2
then the dimensions of e0 are:
{e0} = C^2*s^2/(m^3)
(current square per time square over cubed distance)
And knowing that a Faraday is:
F = C^2*S^2/m^2
The units of e0 are:
{e0} = F/m.
how do a proton and neutron compare?
Answer:
c.they have opposite charges.
Explanation:
because the protons have a positive charge and the neutrons have no charge.