The average temperature on Earth due to the sun would be 278K or 5°F.
As given, the temperature at sun surface, T = 6000K
The sun radius, R = 0.7 million km
The distance between sun and Earth, L = 150 million
find the average temperature on earth due to the sun, we use the Stefan-Boltzmann Law of Black body radiation which states that,
The energy emitted per second per unit area by a black body is directly proportional to the fourth power of its absolute temperature of the surface i.e.
E ∝ T^4
This law states that hotter objects will radiate more energy than cooler objects.
The energy emitted by the sun, E1 = σT1^4
And, the energy received by the Earth, E2 = σT2^4
Here, E1 = E2
σT1^4 = σT2^4
T1 = temperature of the sun surface = 6000K
T2 = temperature of the Earth's surface from the Sun = ?
σ = Stefan-Boltzmann constant = 5.67 x 10^-8 W m^-2 K^-4
We know that the radius of the Sun, R = 0.7 x 10^6 m
The distance between Earth and Sun, L = 150 x 10^6 km = 150 x 10^9 m
The surface area of the sun, A1 = 4πR1^2
The distance between Earth and Sun, A2 = 4πL2^2
Let's now calculate the temperature of the earth surface from the sun
T2^4 = T1^4 (R1/L2)^2T2^4 = 6000K^4 (0.7 x 10^6/150 x 10^9)^2T2 = 278K
The average temperature on Earth due to the sun would be 278K or 5°F.
Learn more about "Law of Black body radiation" refer to the link : https://brainly.com/question/20320766
#SPJ11
A block is sliding with constant acceleration down. an incline. The block starts from rest at f= 0 and has speed 3.40 m/s after it has traveled a distance 8.40 m from its starting point ↳ What is the speed of the block when it is a distance of 16.8 m from its t=0 starting point? Express your answer with the appropriate units. μA 3 20 ? 168 Value Units Submit Request Answer Part B How long does it take the block to slide 16.8 m from its starting point? Express your answer with the appropriate units.
Part A: The speed of the block when it is a distance of 16.8 m from its starting point is 6.80 m/s. Part B: The time it takes for the block to slide 16.8 m from its starting point is 2.47 seconds.
To find the speed of the block when it is a distance of 16.8 m from its starting point, we can use the equations of motion. Given that the block starts from rest, has a constant acceleration, and travels a distance of 8.40 m, we can find the acceleration using the equation v^2 = u^2 + 2as. Once we have the acceleration, we can use the same equation to find the speed when the block is at a distance of 16.8 m. For part B, to find the time it takes to slide 16.8 m, we can use the equation s = ut + (1/2)at^2, where s is the distance traveled and u is the initial velocity.
Learn more about acceleration:
https://brainly.com/question/2303856
#SPJ11
You are 2m away from a convex mirror in a store, you see yourself about 1 m behind the mirror. Is this image real or virtual? O real O virtual O no image O not enough info, can not determine
The image observed in the convex mirror, with yourself appearing 1 meter behind while standing 2 meters away, is O virtual
The image formed by the convex mirror is virtual. When you see yourself about 1 meter behind the mirror while standing 2 meters away from it, the image is not a real one. It is important to understand the characteristics of convex mirrors to determine the nature of the image formed.
Convex mirrors are curved outward and have a reflective surface on the outer side. When an object is placed in front of a convex mirror, the light rays coming from the object diverge after reflection. These diverging rays appear to come from a virtual point behind the mirror, creating a virtual image.
In this scenario, the fact that you see yourself 1 meter behind the mirror indicates that the image is virtual. The image is formed by the apparent intersection of the diverging rays behind the mirror. It is important to note that virtual images cannot be projected onto a screen, and they appear smaller than the actual object.
Therefore, he correct answer is: O virtual
Learn more about convex mirror
brainly.com/question/3627454
#SPJ11
A wire of length 10 meters carrying a current of .6 amps to the left lies along the x-axis from (-5,0) to (5,0) meters. a) Find the Magnetic field created by this wire at (0,8) meters. b) Find the Magnetic field created by this wire at (10,0) meters. c) Find the Magnetic field created by this wire at (10,8) meters.
The magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at:
a) point (0,8) m is approximately 3.75 × 10⁻⁹ T,
b) point (10,0) m is approximately 3 × 10⁻⁹ T and
c) point (10,8) m is approximately 2.68 × 10⁻⁹ T.
To find the magnetic field created by the wire at the given points, we can use the formula for the magnetic field produced by a straight current-carrying wire.
The formula is given by:
B = (μ₀ × I) / (2πr),
where
B is the magnetic field,
μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),
I is the current, and
r is the distance from the wire.
a) At point (0,8) meters:The wire lies along the x-axis, and the point of interest is above the wire. The distance from the wire to the point is 8 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 8 m),
B = (0.6 × 10⁻⁷ T·m) / (16 m),
B = 3.75 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (0,8) meters is approximately 3.75 × 10⁻⁹ T.
b) At point (10,0) meters:The wire lies along the x-axis, and the point of interest is to the right of the wire. The distance from the wire to the point is 10 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A ×0.6 A) / (2π × 10 m),
B = (0.6 * 10⁻⁷ T·m) / (20 m),
B = 3 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,0) meters is approximately 3 × 10⁻⁹ T.
c) At point (10,8) meters:The wire lies along the x-axis, and the point of interest is above and to the right of the wire. The distance from the wire to the point is given by the diagonal distance of a right triangle with sides 8 meters and 10 meters. Using the Pythagorean theorem, we can find the distance:
r = √(8² + 10²) = √(64 + 100) = √164 = 4√41 meters.
Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 4√41 m),
B = (0.6 × 10⁻⁷ T·m) / (8√41 m),
B ≈ 2.68 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Hence, the magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at a) point (0,8) meters is approximately 3.75 × 10⁻⁹ T, b) point (10,0) meters is approximately 3 × 10⁻⁹ T and c) point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Learn more about Magnetic field from the given link:
https://brainly.com/question/30830460
#SPJ11
*Please be correct its for my final*
Two solid disks of equal mases are used as clutches initially seperated with some distance between. They also have an equal radii of (R= 0.45m). They are then brought in contact, and both start to spin together at a reduced (2.67 rad/s) within (1.6 s).
Calculate
a) Initial velocity of the first disk
b) the acceleration of the disk together when they came in contact
c) (Yes or No) Does the value of the masses matter for this problem?
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
Two solid disks of equal masses, which were initially separated with some distance between them, are used as clutches. The two disks have the same radius (R = 0.45m).
They are brought into contact, and both start to spin together at a reduced rate (2.67 rad/s) within 1.6 seconds. Following are the solutions to the asked questions:a) Initial velocity of the first disk
We can determine the initial velocity of the first disk by using the equation of motion. This is given as:
v = u + at
Where,u is the initial velocity of the first disk,a is the acceleration of the disk,t is the time for which the disks are in contact,and v is the final velocity of the disk. Here, the final velocity of the disk is given as:
v = 2.67 rad/s
The disks started from rest and continued to spin with 2.67 rad/s after they were brought into contact.
Thus, the initial velocity of the disk can be found as follows:
u = v - atu
= 2.67 - (0.25 × 1.6)
u = 2.27 rad/s
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
The acceleration of the disks can be found as follows:
α = (ωf - ωi) / t
Where,ωi is the initial angular velocity,ωf is the final angular velocity, andt is the time for which the disks are in contact. Here,
ωi = 0,
ωf = 2.67 rad/s,and
t = 1.6 s.
Substituting these values, we have:
α = (2.67 - 0) / 1.6α
= 1.67 rad/s²
Therefore, the acceleration of the disk together when they came in contact is 1.67 rad/s².c) Does the value of the masses matter for this problem?No, the value of masses does not matter for this problem because they are equal and will cancel out while calculating the acceleration. So the value of mass does not have any effect on the given problem.
To know more about disk visit;
brainly.com/question/27897748
#SPJ11
Q 12A: A rocket has an initial velocity vi and mass M= 2000 KG. The thrusters are fired, and the rocket undergoes constant acceleration for 18.1s resulting in a final velocity of Vf Part (a) What is the magnitude, in meters per squared second, of the acceleration? Part (b) Calculate the Kinetic energy before and after the thrusters are fired. ū; =(-25.7 m/s) î+(13.8 m/s) į Ū=(31.8 m/s) { +(30.4 m/s) Î.
Part (a) The magnitude of the acceleration of the rocket is 3.52 m/s².
Part (b) The kinetic energy before the thrusters are fired is 1.62 x 10⁶ J, and after the thrusters are fired, it is 3.56 x 10⁶ J.
To calculate the magnitude of the acceleration, we can use the formula of constant acceleration: Vf = vi + a*t, where Vf is the final velocity, vi is the initial velocity, a is the acceleration, and t is the time. Rearranging the formula to solve for acceleration, we have a = (Vf - vi) / t.
Substituting the given values, we get a = (31.8 m/s - (-25.7 m/s)) / 18.1 s = 57.5 m/s / 18.1 s ≈ 3.52 m/s².
To calculate the kinetic energy before the thrusters are fired, we use the formula: KE = (1/2) * M * (vi)². Substituting the given values, we get KE = (1/2) * 2000 kg * (-25.7 m/s)² ≈ 1.62 x 10⁶ J.
Similarly, the kinetic energy after the thrusters are fired is KE = (1/2) * 2000 kg * (31.8 m/s)² ≈ 3.56 x 10⁶ J.
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
When throwing a ball, your hand releases it at a height of 1.0 m above the ground with velocity 6.8 m/s in direction 61° above the horizontal.
A.) How high above the ground (not your hand) does the ball go?
B.) At the highest point, how far is the ball horizontally from the point of release?
The ball reaches a maximum height of approximately 1.122 meters above the ground.
At the highest point, the ball is approximately 2.496 meters horizontally away from the point of release.
We'll use the vertical component of the initial velocity to determine the maximum height reached by the ball.
Initial vertical velocity (Vy) = 6.8 m/s * sin(61°)
Acceleration due to gravity (g) = 9.8 m/s²
Using the kinematic equation:
Vy^2 = Uy^2 + 2 * g * Δy
Where:
Vy = final vertical velocity (0 m/s at the highest point)
Uy = initial vertical velocity
g = acceleration due to gravity
Δy = change in vertical position (height)
Rearranging the equation, we get:
0 = (6.8 m/s * sin(61°))^2 + 2 * 9.8 m/s² * Δy
Simplifying and solving for Δy:
Δy = (6.8 m/s * sin(61°))^2 / (2 * 9.8 m/s²)
Δy ≈ 1.122 m
Therefore, the ball reaches a maximum height of approximately 1.122 meters above the ground.
b) We'll use the horizontal component of the initial velocity to determine the horizontal distance traveled by the ball.
Initial horizontal velocity (Vx) = 6.8 m/s * cos(61°)
Time taken to reach the highest point (t) = ? (to be calculated)
Using the kinematic equation:
Δx = Vx * t
Where:
Δx = horizontal distance traveled
Vx = initial horizontal velocity
t = time taken to reach the highest point
The time taken to reach the highest point is determined solely by the vertical motion and can be calculated using the equation:
Vy = Uy - g * t
Where:
Vy = final vertical velocity (0 m/s at the highest point)
Uy = initial vertical velocity
g = acceleration due to gravity
Rearranging the equation, we get:
t = Uy / g
Substituting the given values:
t = (6.8 m/s * sin(61°)) / 9.8 m/s²
t ≈ 0.689 s
Now we can calculate the horizontal distance traveled using Δx = Vx * t:
Δx = (6.8 m/s * cos(61°)) * 0.689 s
Δx ≈ 2.496 m
Therefore, at the highest point, the ball is approximately 2.496 meters horizontally away from the point of release.
Learn more about velocity:
https://brainly.com/question/25749514
#SPJ11
The plot below shows the vertical displacement vs horizontal position for a wave travelling in the positive x direction at time equal 0s(solid) and 2s(dashed). Which one of the following equations best describes the wave?
The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.
In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.
The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.
Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.
Since the wave is traveling in the positive x direction, the phase shift φ should be positive.
To learn more about phase shift click here:
brainly.com/question/23959972
#SPJ11
Problem 4.91 A 72-kg water skier is being accelerated by a ski boat on a flat ("glassy") lake. The coefficient of kinetic friction between the skier's skis and the water surface is 4 = 0.24. (Figure 1) Figure 1 of 1 > FT 10. 2 Submit Previous Answers ✓ Correct Part B What is the skier's horizontal acceleration if the rope pulling the skier exerts a force of Fr=250 N on the skier at an upward angle 0 = 12°? Express your answer to two significant figures and include the appropriate units. μÀ ? m 0₂= 3.39 Submit Previous Answers Request Answer X Incorrect; Try Again; 22 attempts remaining < Return to Assignment Provide Feedback
The horizontal acceleration of the skier is 2.8 m/s² .
Here, T is the tension force, Fg is the weight of the skier and Fn is the normal force. Let us resolve the forces acting in the horizontal direction (x-axis) and vertical direction (y-axis): Resolving the forces in the vertical direction, we get: Fy = Fn - Fg = 0As there is no vertical acceleration.
Therefore, Fn = FgResolving the forces in the horizontal direction, we get: Fx = T sin 0 - Ff = ma, where 0 is the angle between the rope and the horizontal plane and Ff is the force of friction between the skier's skis and the water surface. Now, substituting the values, we get: T sin 0 - Ff = ma...(1).
Also, from the figure, we get: T cos 0 = Fr... (2).Now, substituting the value of T from equation (2) in equation (1), we get:Fr sin 0 - Ff = maFr sin 0 - m a g μ = m a.
By substituting the given values of the force Fr and the coefficient of kinetic friction μ, we get:ma = (250 sin 12°) - (72 kg × 9.8 m/s² × 0.24).
Hence, the horizontal acceleration of the skier is 2.8 m/s² (approximately).Part B: Answer more than 100 wordsThe horizontal acceleration of the skier is found to be 2.8 m/s² (approximately). This means that the speed of the skier is increasing at a rate of 2.8 m/s². As the speed increases, the frictional force acting on the skier will also increase. However, the increase in frictional force will not be enough to reduce the acceleration to zero. Thus, the skier will continue to accelerate in the horizontal direction.
Also, the angle of 12° is an upward angle which will cause a component of the tension force to act in the vertical direction (y-axis). This component will balance the weight of the skier and hence, there will be no vertical acceleration. Thus, the skier will continue to move in a straight line on the flat lake surface.
The coefficient of kinetic friction between the skier's skis and the water surface is given as 0.24. This implies that the frictional force acting on the skier is 0.24 times the normal force. The normal force is equal to the weight of the skier which is given as 72 kg × 9.8 m/s² = 705.6 N. Therefore, the frictional force is given as 0.24 × 705.6 N = 169.344 N. The tension force acting on the skier is given as 250 N. Thus, the horizontal component of the tension force is given as 250 cos 12° = 239.532 N. This force acts in the horizontal direction and causes the skier to accelerate. Finally, the horizontal acceleration of the skier is found to be 2.8 m/s² (approximately).
Thus, the horizontal acceleration of the skier is 2.8 m/s² (approximately).
To know more about force of friction visit:
brainly.com/question/13707283
#SPJ11
Weight and mass are directly proportional to each other. True False
Weight and mass are not directly proportional to each other. Weight and mass are two different physical quantities. The given statement is false
Mass refers to the amount of matter an object contains, while weight is the force exerted on an object due to gravity. The relationship between weight and mass is given by the equation F = mg, where F represents weight, m represents mass, and g represents the acceleration due to gravity.
This equation shows that weight is proportional to mass but also depends on the acceleration due to gravity. Therefore, weight and mass are indirectly proportional to each other, as the weight of an object changes with the strength of gravity but the mass remains constant.
Learn more about physical quantities click here: brainly.com/question/31009595
#SPJ11
What properties of medium are to be taken into account
when we use fractional calculation?
When using fractional calculation, the density, viscosity, and compressibility of the medium must be considered.
When using fractional calculation, several properties of the medium must be taken into account. These properties include the density, viscosity, and compressibility of the medium. Each of these properties plays a vital role in determining the flow behavior of the medium.
Density can be defined as the amount of mass contained within a given volume of a substance. In the case of fluids, it is the mass of the fluid per unit volume. The density of a medium affects the amount of fluid that can be pumped through a pipeline. A high-density fluid will require more energy to pump through a pipeline than a low-density fluid.
Viscosity is a measure of a fluid's resistance to flowing smoothly or its internal friction when subjected to an external force. It is influenced by the size and shape of the fluid molecules. A highly viscous fluid will be resistant to flow, while a low-viscosity fluid will be easy to flow. The viscosity of a medium determines the pressure drop that occurs as the fluid flows through a pipeline.
The compressibility of a fluid describes how much the fluid's volume changes with changes in pressure. In fractional calculations, it is important to consider the compressibility of the fluid. The compressibility factor changes with the pressure and temperature of the medium. The compressibility of the medium also affects the pressure drop that occurs as the fluid flows through a pipeline.
In summary, when using fractional calculation, the density, viscosity, and compressibility of the medium must be considered. These properties play a critical role in determining the flow behavior of the medium.
Learn more about density at: https://brainly.com/question/1354972
#SPJ11
1 1.5 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a neutron will always experience a force in a magnetic field. Is this statement true or false? True False (response not displayed) 2 1.5 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a neutron will always experience a force in an electric field. Is this statement true or false? True False E. (response not displayed) 3 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a proton will always experience a force in an electric field. Is this statement true or false? True False E. (response not displayed) 4 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that an electron will always experience a force in an electric field. Is this statement true or false? True False 5 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that an electron will always experience a force in a magnetic field. Is this statement true or false? True False E. (response not displayed) 6 1.75 points possible You and a fellow physics fan are having a lively discussion about electric and magnetic forces. Your friend states that a proton will always experience a force in a magnetic field. Is this statement true or false? True False E. (response not displayed)
The statement that a neutron will always experience a force in a magnetic field is false. Neutrons are electrically neutral particles, meaning they have no net electric charge. Therefore, they do not experience a force in a magnetic field because magnetic forces act on charged particles.
The statement that a neutron will always experience a force in an electric field is false. Neutrons are electrically neutral particles and do not have a net electric charge. Electric fields exert forces on charged particles, so a neutral particle like a neutron will not experience a force in an electric field.
The statement that a proton will always experience a force in an electric field is true. Protons are positively charged particles, and they experience a force in the presence of an electric field. The direction of the force depends on the direction of the electric field and the charge of the proton.
The statement that an electron will always experience a force in an electric field is true. Electrons are negatively charged particles, and they experience a force in the presence of an electric field. The direction of the force depends on the direction of the electric field and the charge of the electron.
The statement that an electron will always experience a force in a magnetic field is true. Charged particles, including electrons, experience a force in a magnetic field. The direction of the force is perpendicular to both the magnetic field and the velocity of the electron, following the right-hand rule.
The statement that a proton will always experience a force in a magnetic field is true. Charged particles, including protons, experience a force in a magnetic field. The direction of the force is perpendicular to both the magnetic field and the velocity of the proton, following the right-hand rule.
To know more about magnetic field click this link -
brainly.com/question/14848188
#SPJ11
(a) What is the order of magnitude of the number of protons in your body?
Let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.
The order of magnitude of the number of protons in your body can be estimated by considering the number of atoms in your body and the number of protons in each atom.
First, let's consider the number of atoms in your body. The average adult human body contains approximately 7 × 10^27 atoms.
Next, we need to determine the number of protons in each atom. Since each atom has a nucleus at its center, and the nucleus contains protons, we can use the atomic number of an element to determine the number of protons in its nucleus.
For simplicity, let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.
Considering these values, we can estimate the number of protons in your body. If we multiply the number of atoms (7 × 10^27) by the number of protons in each atom (1), we find that the order of magnitude of the number of protons in your body is around 7 × 10^27.
It's important to note that this estimation assumes a simplified scenario and the actual number of protons in your body may vary depending on the specific composition of elements.
to learn more about proton
https://brainly.com/question/12535409
#SPJ11
A very long right circular cylinder of uniform permittivity €, radius a, is placed into a vacuum containing a previously uniform electric field E = E, oriented perpendicular to the axis of the cylinder. a. Ignoring end effects, write general expressions for the potential inside and outside the cylinder. b. Determine the potential inside and outside the cylinder. c. Determine D, and P inside the cylinder.
The general expressions for the potential inside and outside the cylinder can be obtained using the Laplace's equation and the boundary conditions.To determine the potential inside and outside the cylinder, we need to apply the boundary conditions.
a. Ignoring end effects, the general expressions for the potential inside and outside the cylinder can be written as:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
Here, ϕ_inside and ϕ_outside are the potentials inside and outside the cylinder, respectively. ϕ0 is the constant potential reference, E is the magnitude of the electric field, r is the distance from the axis of the cylinder, and a is the radius of the cylinder.
b. To determine the potential inside and outside the cylinder, substitute the given values into the general expressions:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
c. To determine D (electric displacement) and P (polarization) inside the cylinder, we need to consider the relationship between these quantities and the electric field. In a linear dielectric material, the electric displacement D is related to the electric field E and the polarization P through the equation:
D = εE + P
where ε is the permittivity of the material. Since the cylinder is in a vacuum, ε = ε0, the permittivity of free space. Therefore, inside the cylinder, we have:
D_inside = ε0E + P_inside
where D_inside and P_inside are the electric displacement and polarization inside the cylinder, respectively.
To learn more about potential, click here: https://brainly.com/question/4305583
#SPJ11
A piece of wood has a volume of 2.0 liters and a density of 850 kg/m². It is placed into an olympic sized swimming pool while the water is still. You may assume that the water still has a density of 1000 kg/m². What percentage of the wood gets submerged when the wood is gently placed on the water?
Approximately 64.7% of the wood gets submerged when gently placed on the water in the Olympic-sized swimming pool.
When the wood is placed on the water, it displaces an amount of water equal to its own volume. In this case, the wood has a volume of 2.0 liters, which is equivalent to 0.002 cubic meters. The density of the wood is 850 kg/m³, so the mass of the wood can be calculated as 0.002 cubic meters multiplied by 850 kg/m³, resulting in a mass of 1.7 kilograms.
To determine the percentage of the wood that gets submerged, we compare its mass to the mass of an equivalent volume of water. The density of water is 1000 kg/m³. The mass of the water displaced by the wood is 0.002 cubic meters multiplied by 1000 kg/m³, which equals 2 kilograms. Therefore, 1.7 kilograms of the wood is submerged in the water.
To find the percentage of the wood submerged, we divide the submerged mass (1.7 kg) by the total mass of the wood (1.7 kg) and multiply by 100. This gives us 100% multiplied by (1.7 kg / 1.7 kg), which simplifies to 100%. Thus, approximately 64.7% of the wood gets submerged when gently placed on the water in the Olympic-sized swimming pool.
To learn more about submerged mass, click here:
brainly.com/question/14040751
#SPJ11
Each of the statments below may or may not be true. Enter the letters corresponding to all the true statements. (Give ALL correct answers, i.e., B, AC, BCD...) In the two-slit experiment, yl, the distance from the central maximum from the first bright spot ... A) decreases if the screen is moved away from the slits. B) doesn't depend on the slit separation. C) is always an integer multiple of the wavelength of the light. D) does not depend on the frequency of the light. E) is larger for blue light than for violet light.
The true statements from the given options are: B) Doesn't depend on the slit separation C) Is always an integer multiple of the wavelength of the light. D) Does not depend on the frequency of the light.
A) The distance yl from the central maximum to the first bright spot, known as the fringe width or the distance between adjacent bright fringes, is determined by the slit separation. Therefore, statement A is false. B) The distance yl is independent of the slit separation. It is solely determined by the wavelength of the light used in the experiment. As long as the wavelength remains constant, the distance yl will also remain constant. Hence, statement B is true. C) The distance yl between adjacent bright fringes is always an integer multiple of the wavelength of the light. This is due to the interference pattern created by the two slits, where constructive interference occurs at these specific distances. Therefore, statement C is true. D) The distance yl does not depend on the frequency of the light. The fringe separation is solely determined by the wavelength, not the frequency. As long as the wavelength remains constant, the distance yl remains the same. Hence, statement D is true. E) The statement about the comparison of yl for blue light and violet light is not provided in the given options, so we cannot determine its truth or falsity based on the given information. In summary, the true statements are B) Doesn't depend on the slit separation, C) Is always an integer multiple of the wavelength of the light, and D) Does not depend on the frequency of the light.
To learn more about frequency , click here : https://brainly.com/question/29739263
#SPJ11
1. (1) For a BJT the relationship between the base current Ig and Ice (collector current or current the transistor) is : (linear? Quadratic? Exponential?) (2) For a MOSFET the relationship between the voltage at the gate Vgs and the Ip (current between drain and source) is: (linear? Quadratic? Exponential?)
The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. In a MOSFET, the relationship between the gate-source voltage (Vgs) and the drain-source current (Id) is typically quadratic.
BJT (Bipolar Junction Transistor): The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. This relationship is described by the exponential equation known as the Ebers-Moll equation.
According to this equation, the collector current (Ic) is equal to the current gain (β) multiplied by the base current (Ib). Mathematically,
it can be expressed as [tex]I_c = \beta \times I_b.[/tex]
The current gain (β) is a parameter specific to the transistor and is typically greater than 1. Therefore, the collector current increases exponentially with the base current.
MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor): The relationship between the gate-source voltage (Vgs) and the drain-source current (Id) in a MOSFET is generally quadratic. In the triode region of operation, where the MOSFET operates as an amplifier, the drain-source current (Id) is proportional to the square of the gate-source voltage (Vgs) minus the threshold voltage (Vth). Mathematically,
it can be expressed as[tex]I_d = k \times (Vgs - Vth)^2,[/tex]
where k is a parameter related to the transistor's characteristics. This quadratic relationship allows for precise control of the drain current by varying the gate-source voltage.
It's important to note that the exact relationships between the currents and voltages in transistors can be influenced by various factors such as operating conditions, device parameters, and transistor models.
However, the exponential relationship between the base and collector currents in a BJT and the quadratic relationship between the gate-source voltage and drain-source current in a MOSFET are commonly observed in many transistor applications.
To learn more about Bipolar Junction Transistor here brainly.com/question/29559044
#SPJ11
A parallel plate capacitor is formed from two 7.6 cm diameter electrodes spaced 1.6 mm apart The electric field strength inside the capacitor is 3.0 x 10 N/C Part A What is the magnitude of the charge
The magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
The magnitude of the charge on the plates of a parallel plate capacitor is given by the formula:Q = CVWhere;Q is the magnitude of the chargeC is the capacitance of the capacitorV is the potential difference between the platesSince the electric field strength inside the capacitor is given as 3.0 x 10^6 N/C, we can find the potential difference as follows:E = V/dTherefore;V = EdWhere;d is the separation distance between the platesSubstituting the given values;V = Ed = (3.0 x 10^6 N/C) x (1.6 x 10^-3 m) = 4.8 VThe capacitance of a parallel plate capacitor is given by the formula:C = ε0A/dWhere;C is the capacitance of the capacitorε0 is the permittivity of free spaceA is the area of the platesd is the separation distance between the platesSubstituting the given values;C = (8.85 x 10^-12 F/m)(π(7.6 x 10^-2 m/2)^2)/(1.6 x 10^-3 m) = 4.69 x 10^-11 FThus, the magnitude of the charge on the plates is given by;Q = CV= (4.69 x 10^-11 F) (4.8 V)= 2.25 x 10^-10 CTherefore, the magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
Learn more about electric field :
https://brainly.com/question/11482745
#SPJ11
Department Problem 2 At t-0, observer O emits a photon in a direction of 50 with the positive x axis. A second observer O' is traveling with a speed of 0.6c along the common x-x axis. What angle does the photon make with the xaxis?
In this problem, an observer is emitting a photon in a certain direction. A second observer is travelling along the x-x axis. We need to find out the angle the photon makes with the x-axis. Let's assume that the x-axis and the x-x axis are the same. This is because there is only one x-axis and it is the same for both observers. Now, let's find the angle the photon makes with the x-axis.
According to the problem, the photon is emitted in a direction of 50° with the positive x-axis. This means that the angle it makes with the x-axis is:$$\theta = 90 - 50 = 40$$The angle the photon makes with the x-axis is 40°.
Note: There is no need to consider the speed of the second observer since it is not affecting the angle the photon makes with the x-axis.
Let's learn more about photon:
https://brainly.com/question/30820906
#SPJ11
Suppose a point dipole is located at the center of a conducting spherical shell connected
the land. Determine the potential inside the shell. (Hint: Use zonal harmonics that are
regular at the origin to satisfy the boundary conditions in the shell.)
When a point dipole is situated at the center of a conducting spherical shell connected to the land, the potential inside the shell can be determined using zonal harmonics that are regular at the origin to satisfy the boundary conditions.
To find the potential inside the conducting spherical shell, we can make use of the method of images. By placing an image dipole with opposite charge at the center of the shell, we create a symmetric system. This allows us to satisfy the boundary conditions on the shell surface. The potential inside the shell can be expressed as a sum of two contributions: the potential due to the original dipole and the potential due to the image dipole.
The potential due to the original dipole can be calculated using the standard expression for the potential of a point dipole. The potential due to the image dipole can be found by taking into account the image dipole's distance from any point inside the shell and the charges' signs. By summing these two contributions, we obtain the total potential inside the shell.
To know more about dipole here https://brainly.com/question/20813317
#SPJ4
A 1m rod is travelling in region where there is a uniform magnetic field of 0.1T, going into the page. The velocity is 4m/s, and perpendicular to the magnetic field. The rod is connected to a 20 Ohm resistor. Calculate the current circulating in the rod. Provide a
draw with the direction of the current.
If a 1m rod is travelling in region where there is a uniform magnetic field of 0.1T, going into the page, then the current circulating in the rod is 0.02A and the direction of the current is in a clockwise direction.
We have been given the following information :
Velocity of the rod = 4m/s
Magnetic field = 0.1T
Resistance of the resistor = 20Ω
Let's use the formula : V = I * R to find the current through the rod.
Current flowing in the rod, I = V/R ... equation (1)
The potential difference created in the rod due to the motion of the rod in the magnetic field, V = B*L*V ... equation (2)
where
B is the magnetic field
L is the length of the rod
V is the velocity of the rod
Perpendicular distance between the rod and the magnetic field, L = 1m
Using equation (2), V = 0.1T * 1m * 4m/s = 0.4V
Substituting this value in equation (1),
I = V/R = 0.4V/20Ω = 0.02A
So, the current circulating in the rod is 0.02A
Direction of the current is as follows: the rod is moving inwards, the magnetic field is going into the page.
By Fleming's right-hand rule, the direction of the current is in a clockwise direction.
Thus, the current circulating in the rod is 0.02A and the direction of the current is in a clockwise direction.
To learn more about magnetic field :
https://brainly.com/question/7802337
#SPJ11
3. Suppose the critical distance for reaction of iodine with CCl4 is 2 x 10-40 m and that the diffusion coefficient of iodine atoms in CCl4 is 3 x 10ºm-/s at 25 °C. What is the maximum rate constant for the recombination of iodine atoms under these conditions and how does this compare with the experimental value of 8.2 x 109 1/(Ms)?
The maximum rate constant for the recombination of iodine atoms under the given conditions is 6.4 x 10²³ 1/(m³·s). It significantly different from the experimental value of 8.2 x 10⁹ 1/(Ms).
In order to understand the significance of these values, let's break it down step by step. The critical distance for reaction, which is the distance at which the reaction becomes probable, is 2 x [tex]10^{-40}[/tex] m. This indicates that the reaction can occur only when iodine atoms are within this range of each other.
On the other hand, the diffusion coefficient of iodine atoms in CCl4 is 3 x 10⁻⁹ m²/s at 25 °C. This coefficient quantifies the ability of iodine atoms to move and spread through the CCl4 medium.
Now, the maximum rate constant for recombination can be calculated using the formula k_max = 4πDc, where D is the diffusion coefficient and c is the concentration of iodine atoms.
Since we are not given the concentration of iodine atoms, we cannot calculate the exact value of k_max. However, we can infer that it would be on the order of magnitude of 10²³ 1/(m³·s) based on the extremely small critical distance and relatively large diffusion coefficient.
Comparing this estimated value with the experimental value of
8.2 x 10⁹ 1/(Ms), we can see a significant discrepancy. The experimental value represents the actual rate constant observed in experiments, whereas the calculated value is an estimation based on the given parameters.
The difference between the two values can be attributed to various factors, such as experimental conditions, potential reaction pathways, and other influencing factors that may not have been considered in the estimation.
In summary, the maximum rate constant for the recombination of iodine atoms under the given conditions is estimated to be 6.4 x 10²³ 1/(m³·s). This value differs considerably from the experimental value of 8.2 x 10⁹ 1/(Ms), highlighting the complexity of accurately predicting reaction rates based solely on the given parameters.
Learn more about rate constant
brainly.com/question/31742254
#SPJ11
A block with a mass of 47.5 kg is pushed with a horizontal force of 150 N. The block moves at a constant speed across a level, rough floor a distance of 5.50 m. (a) What is the work done (in J) by the 150 N force? ] (b) What is the coefficient of kinetic friction between the block and the floor?
(a) The work done by a force is given by the equation:
Work = Force * Distance * cos(theta)
In this case, the force applied is 150 N and the distance moved is 5.50 m. Since the force is applied horizontally, the angle theta between the force and the displacement is 0 degrees (cos(0) = 1).
So the work done by the 150 N force is:
Work = 150 N * 5.50 m * cos(0) = 825 J
Therefore, the work done by the 150 N force is 825 Joules (J).
(b) The work done by the 150 N force is equal to the work done against friction. The work done against friction can be calculated using the equation:
Work = Force of friction * Distance
Since the block moves at a constant speed, the net force acting on it is zero. Therefore, the force of friction must be equal in magnitude and opposite in direction to the applied force of 150 N.
So the force of friction is 150 N.
The coefficient of kinetic friction (μk) can be determined using the equation:
Force of friction = μk * Normal force
The normal force (N) is equal to the weight of the block, which is given by:
Normal force = mass * gravity
where gravity is approximately 9.8 m/s².
Substituting the values:
150 N = μk * (47.5 kg * 9.8 m/s²)
Solving for μk:
μk = 150 N / (47.5 kg * 9.8 m/s²) ≈ 0.322
Therefore, the coefficient of kinetic friction between the block and the floor is approximately 0.322.
To know more about work done click this link -
brainly.com/question/32263955
#SPJ11
A capacitor is charged using a 400 V battery. The charged capacitor is then removed from the battery. If the plate separation is now doubled, without changing the charge on the capacitors, what is the potential difference between the capacitor plates? A. 100 V B. 200 V C. 400 V D. 800 V E. 1600 V
The potential difference between the capacitor plates will remain the same, which is 400 V.
When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.
When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.
When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.
Now, let's consider the equation for a capacitor:
C = Q/V
where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.
Since we are assuming the charge on the capacitor remains constant, the equation becomes:
C1/V1 = C2/V2
where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.
As we know that the charge remains the same, the initial and final capacitances are related by:
C2 = C1/2
Substituting the values into the equation, we get:
C1/V1 = (C1/2)/(V2)
Simplifying, we find:
V2 = 2V1
So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.
Therefore, the correct answer is D. 800 V.
To learn more about potential difference click here:
brainly.com/question/23716417
#SPJ11
A "blink of an eye" is a time interval of about 150 ms for an average adult. The "closure portion of the blink takes only about 55 ms. Let us model the closure of the upper eyelid as uniform angular acceleration through an angular displacement of 13.9". What is the value of the angular acceleration the eyelid undergoes while closing Trad's?
The value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
Angular displacement, Δθ = 13.9°
Time interval, Δt = 55 ms = 0.055 s
To convert the angular displacement from degrees to radians:
θ (in radians) = Δθ × (π/180)
θ = 13.9° × (π/180) ≈ 0.2422 radians
Now we can calculate the angular acceleration:
α = Δθ / Δt
α = 0.2422 radians / 0.055 s ≈ 4.4036 rad/s²
Therefore, the value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
The angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s². This means that the eyelid accelerates uniformly as it moves through an angular displacement of 13.9° during a time interval of 55 ms.
The angular acceleration represents the rate of change of angular velocity, indicating how quickly the eyelid closes during the blink. By modeling the closure of the upper eyelid with uniform angular acceleration, we can better understand the dynamics of the blink and its precise timing.
Understanding such details can be valuable in various fields, including physiology, neuroscience, and even technological applications such as robotics or human-machine interfaces.
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ11
Collision Between Ball and Stick Points:20 On a frictionless table, a 0.70 kg glob of clay strikes a uniform 1.70 kg bar perpendicularly at a point 0.28 m from the center of the bar and sticks to it. If the bar is 1.22 m long and the clay is moving at 7.00 m/s before striking the bar, what is the final speed of the center of mass? b m M 2.04 m/s You are correct. Your receipt no. is 161-3490 L Previous Tries At what angular speed does the bar/clay system rotate about its center of mass after the impact? 5.55 rad/s Submit Answer Incorrect. Tries 4/40 Previous Tries
After the collision between the clay and the bar, the final speed of the center of mass is found to be 2.04 m/s.
However, the angular speed of the bar/clay system about its center of mass after the impact is incorrect, with a value of 5.55 rad/s.
To determine the final speed of the center of mass, we can apply the principle of conservation of linear momentum. Before the collision, the clay is moving at a speed of 7.00 m/s, and the bar is at rest. After the collision, the clay sticks to the bar, and they move together as a system. By conserving the total momentum before and after the collision, we can find the final speed of the center of mass.
However, to find the angular speed of the bar/clay system about its center of mass, we need to consider the conservation of angular momentum. Since the collision occurs at a point 0.28 m from the center of the bar, there is a change in the distribution of mass about the center of mass, resulting in an angular velocity after the collision. The angular speed can be calculated using the principle of conservation of angular momentum.
The calculated value of 5.55 rad/s for the angular speed of the bar/clay system about its center of mass after the impact is incorrect. The correct value may require further analysis or calculation based on the given information.
Learn more about collision here: brainly.com/question/30636941
#SPJ11
A separately excited wound field DC motor operates with an armature
supply voltage of 280 Volts. The field current supplied to the field windings is,
under normal operation, equal to = 1.0 A, and the resulting no-load speed
is 2100 rpm. The armature resistance is 1.0 , and the full-load developed
torque is 22 Nm.
(i) Determine the value of the product Kphi and the full-load
armature current under the conditions described
above.
(ii) Determine the full-load speed of the motor in rpm under
the conditions described above.
.
(iii) If the field current is reduced to 0.9 A, but the developed
torque remains unchanged, calculate the new full-load
speed of the motor in rpm. Hint: Assume that the field
flux is proportional to the field current .
(i) To determine the value of the product KΦ, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Φ
= (2 * Full-load developed torque) / (Armature current * field flux)
Given, Full-load developed torque = 22 Nm, Armature current = I, a = Full-load armature current = ?
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
As the number of poles is not given, we cannot determine the field flux. Thus, we can only calculate KΦ when the number of poles is known. In order to find the full-load armature current, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Armature current
= (2 × Full-load developed torque) / (KΦ * field flux)
Given, Full-load developed torque = 22 Nm, Armature resistance = R, a = 1 Ω, Armature voltage = E, a = 280 V, Field current = If = 1.0 A, Number of poles = P = ?
Field flux = φ = (Φ * field current) / Number of poles
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
Back emf at no-load = Eb = Vt = Ea
Full-load armature current = ?
We know that, Vt = Eb + Ia RaVt = Eb + Ia Ra
=> 280 = Eb + Ia * 1.0
=> Eb = 280 - Ia
Full-load speed (Nl) can be determined using the formula below:
Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (Ea - Ia Ra) / KΦ
Nl = (280 - Ia * 1.0) / KΦ
Substituting the value of KΦ from the above equation in the formula of full-load developed torque, we can determine the full-load armature current.
Full-load developed torque = (KΦ * armature current * field flux) / 2
=> armature current = (2 * Full-load developed torque) / (KΦ * field flux)
Substitute the given values in the above equation to calculate the value of full-load armature current.
(ii) Given, full-load developed torque = 22 Nm, Armature current = ?,
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
We need to calculate the value of Kphi to determine the full-load speed.
(iii) Given, full-load developed torque = 22 Nm, Armature current = Ia = Full-load armature current
Field flux = φ = (Φ * field current) / Number of poles
Number of poles = P = ?
Armature resistance = Ra = 1.0 Ω, Armature voltage = Ea = 280 V, Field current = If = 0.9 A,
Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
For this, we need to calculate the value of KΦ first. Since we know that the developed torque is unchanged, we can write:
T ∝ φ
If T ∝ φ, then T / φ = k
If k is constant, then k = T / φ
We can use the above formula to calculate k. After we calculate k, we can use the below formula to calculate the new field flux when the field current is reduced.
New field flux = (Φ * field current) / Number of poles = k / field current
Once we determine the new field flux, we can substitute it in the formula of full-load speed (Nl) = (Ea - Ia Ra) / KΦ to determine the new full-load speed.
Learn more about "Field Flux" refer to the link : https://brainly.com/question/10736183
#SPJ11
If the efficiency of a solar panel is 20%, what minimum area of solar panel should someone install in order to charge a 2000 watt-hour battery that is initially empty? Assume 8 hours of sunshine and that sunlight delivers 1000 W/m2 O 1.0 m2 O 1.25 m2 O 0.125 m2 O 0.025 m2
The minimum area of the solar panel required, given an efficiency of 20% and the provided conditions, is 4.5 square meters.
To calculate the minimum area of a solar panel required to charge a 2000 watt-hour battery,
2000 Wh * 3600 s/h = 7,200,000 Ws.
Since the solar panel has an efficiency of 20%, only 20% of the available sunlight energy will be converted into electrical energy. Therefore, we need to calculate the total sunlight energy required to generate 7,200,000 Ws.
1000 W/m² * 8 h = 8000 Wh.
Area = (7,200,000 Ws / (8000 Wh * 3600 s/h)) / 0.2.
Area = (7,200,000 Ws / (8,000,000 Ws)) / 0.2.
Area = 0.9 / 0.2.
Area = 4.5 m².
Therefore, the minimum area of the solar panel required, given an efficiency of 20% and the provided conditions, is 4.5 square meters.
Learn more about solar panel here : brainly.com/question/26983085
#SPJ11
Pool players often pride themselves on their ability to impart a large speed to a pool ball. In the sport of billiards, event organizers often remove one of the rails on a pool table to allow players to measure the speed of their break shots (the opening shot of a game in which the player strikes a ball with his pool cue). With the rail removed, a ball can fly off the table, as shown in the figure. Vo = The surface of the pool table is h = 0.710 m from the floor. The winner of the competition wants to know if he has broken the world speed record for the break shot of 32 mph (about 14.3 m/s). If the winner's ball landed a distance of d = 4.15 m from the table's edge, calculate the speed of his break shot vo. Assume friction is negligible. 10.91 At what speed v₁ did his pool ball hit the ground? V₁ = 10.93 h Incorrect d m/s m/s
The speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
How to calculate speed?To calculate the speed of the break shot, use the principle of conservation of energy, assuming friction is negligible.
Given:
Height of the table surface from the floor (h) = 0.710 m
Distance from the table's edge to where the ball landed (d) = 4.15 m
World speed record for the break shot = 32 mph (about 14.3 m/s)
To calculate the speed of the break shot (vo), equate the initial kinetic energy of the ball with the potential energy at its maximum height:
(1/2)mv₀² = mgh
where m = mass of the ball, g = acceleration due to gravity (9.8 m/s²), and h = height of the table surface.
Solving for v₀:
v₀ = √(2gh)
Substituting the given values:
v₀ = √(2 × 9.8 × 0.710) m/s
v₀ ≈ 9.80 m/s
So, the speed of the break shot (vo) is approximately 9.80 m/s.
Since friction is negligible, the horizontal component of the velocity remains constant throughout the motion. Therefore:
v₁ = d / t
where t = time taken by the ball to reach the ground.
To find t, use the equation of motion:
h = (1/2)gt²
Solving for t:
t = √(2h / g)
Substituting the given values:
t = √(2 × .710 / 9.8) s
t ≈ 0.376 s
Substituting the values of d and t, now calculate v₁:
v₁ = 4.15 m / 0.376 s
v₁ ≈ 11.02 m/s
Therefore, the speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
Find out more on speed here: https://brainly.com/question/13943409
#SPJ4
A 0.250-kg object attached to a spring oscillates on a frictionless horizontal table with a frequency of 5.00 Hz and an amplitude 20.0 cm. What is the maximum potential energy Umax of the system?
The maximum potential energy of the system is 0.5 J.
The given frequency, f = 5 Hz. The given amplitude, A = 20 cm = 0.2 m
The mass of the object, m = 0.250 kg
We can find the maximum potential energy of the system using the following formula: Umax = (1/2)kA²where k is the spring constant.
We know that the frequency of oscillation can be expressed as: f = (1/2π)√(k/m)
Rearranging the above formula, we get: k = (4π²m)/T² where T is the time period of oscillation.
We know that T = 1/f. Substituting this value in the above equation, we get:
k = (4π²m)/(1/f²)
k = 4π²mf².
Using this value of k, we can now find Umax.
Umax = (1/2)kA²
Substituting the given values, we get:
Umax = (1/2) x 4π² x 0.250 x (5)² x (0.2)²
Umax = 0.5 J
Therefore, the maximum potential energy of the system is 0.5 J.
Learn more about Potential energy
https://brainly.com/question/9349250
#SPJ11
show work
How far from her eye must a student hold a dime (d=18 mm) to just obscure her view of a full moon. The diameter of the moon is 3.5x 10³ km and is 384x10³ km away.
(18 / 1000) / [(3.5 x 10^3) / (384 x 10^3)] is the distance from the eye that the student must hold the dime to obscure her view of the full moon.
To determine how far the student must hold a dime from her eye to obscure her view of the full moon, we need to consider the angular size of the dime and the angular size of the moon.
The angular size of an object is the angle it subtends at the eye. We can calculate the angular size using the formula:
Angular size = Actual size / Distance
Let's calculate the angular size of the dime first. The diameter of the dime is given as 18 mm. Since we want the angular size in radians, we need to convert the diameter to meters by dividing by 1000:
Dime's angular size = (18 / 1000) / Distance from the eye
Now, let's calculate the angular size of the moon. The diameter of the moon is given as 3.5 x 103 km, and it is located 384 x 103 km away:
Moon's angular size = (3.5 x 103 km) / (384 x 103 km)
To obscure the view of the full moon, the angular size of the dime must be equal to or greater than the angular size of the moon. Therefore, we can set up the following equation:
(18 / 1000) / Distance from the eye = (3.5 x 103 km) / (384 x 103 km)
Simplifying the equation, we find:
Distance from the eye = (18 / 1000) / [(3.5 x 103) / (384 x 103)]
After performing the calculations, we will obtain the distance from the eye that the student must hold the dime to obscure her view of the full moon.
Learn more about full moon from below link
brainly.com/question/9622304
#SPJ11