Answer:
500mExplanation:
Using the equation of motion S = ut + 1/2 gt²
S = the vertical displacement (in m)
u = initial velocity of the object (in m/s)
g = acceleration due to gravity (in m/s²)
t = time taken (in secs)
Given u = 0m/s, g = 10m/s² and t = 10s, substituting this value into the equation to get the vertical displacement w have;
S = 0+1/2 (10)(10)²
S = 1000/2
S = 500m
The vertical displacement after 10seconds is 500m
A toy cannon uses a spring to project a 5.31-g soft rubber ball. The spring is originally compressed by 4.90 cm and has a force constant of 8.09 N/m. When the cannon is fired, the ball moves 14.1 cm through the horizontal barrel of the cannon, and the barrel exerts a constant friction force of 0.031 7 N on the ball.
Required:
a. With what speed does the projectile leave the barrel of the cannon?
b. At what point does the ball have maximum speed?
c. What is this maximum speed?
Using only the trainiris dataset, for each feature, perform a simple search to find the cutoff that produces the highest accuracy, predicting virginica if greater than the cutoff and versicolor otherwise. Use the seqfunction over the range of each feature by intervals of 0.1 for this search. Which feature produces the highest accuracy?
A. Sepal. Length
B. Sepal. Width
C. Petal. Length
D. Petal. Width
Answer: C. Petal. Length
Explanation: Petal are unit of Corolla which are usually brightly colored. This part of a plant or flower, helps attracts insects to the plant for pollination. And also provide protection to the reproductive parts of the plant or flower.
Examples of flowers with petals is the Sun Flower, which coincidentally is the flower plant with most petals.
A traveling electromagnetic wave in a vacuum has an electric field amplitude of 62.5 V/m. Calculate the intensity S of this wave. Then, determine the amount of energy ???? that flows through area of 0.0231 m2 over an interval of 14.9 s, assuming that the area is perpendicular to the direction of wave propagation.
Answer:
a) 5.19 W/m²
b) 1.79 J
Explanation:
For the calculation of intensity, I. We have
I = E(rms)² / (cμ), where
c = speed of light
μ = permeability of free space
I = (62.5 / √2)² / [(2.99 x 10^8) (1.26 x 10^-6)]
I = 1954 / 376.74
I = 5.19 W/m²
Therefore, the intensity, I = 5.19 W/m²
t = 14.9 s
A = 0.0231 m²
Amount if energy flowing, U = IAt
U = (5.19) (0.0231) (14.9) J
U = 1.79 J
A disk of mass m and moment of inertia of I is spinning freely at 6.00 rad/s when a second identical disk, initially not spinning, is dropped onto it so that their axes coincide. In a short time, the two disks are corotating. What is the angular speed of the new system
Answer:
The angular speed of the new system is [tex]3\,\frac{rad}{s}[/tex].
Explanation:
Due to the absence of external forces between both disks, the Principle of Angular Momentum Conservation is observed. Since axes of rotation of each disk coincide with each other, the principle can be simplified into its scalar form. The magnitude of the Angular Momentum is equal to the product of the moment of inertial and angular speed. When both disks begin to rotate, moment of inertia is doubled and angular speed halved. That is:
[tex]I\cdot \omega_{o} = 2\cdot I \cdot \omega_{f}[/tex]
Where:
[tex]I[/tex] - Moment of inertia of a disk, measured in kilogram-square meter.
[tex]\omega_{o}[/tex] - Initial angular speed, measured in radians per second.
[tex]\omega_{f}[/tex] - Final angular speed, measured in radians per second.
This relationship is simplified and final angular speed can be determined in terms of initial angular speed:
[tex]\omega_{f} = \frac{1}{2}\cdot \omega_{o}[/tex]
Given that [tex]\omega_{o} = 6\,\frac{rad}{s}[/tex], the angular speed of the new system is:
[tex]\omega_{f} = \frac{1}{2}\cdot \left(6\,\frac{rad}{s} \right)[/tex]
[tex]\omega_{f} = 3\,\frac{rad}{s}[/tex]
The angular speed of the new system is [tex]3\,\frac{rad}{s}[/tex].
A 20-kg object sitting at rest is struck elastically in a head-on collision with a 10-kg object initially moving at 3.0 m/s. Find the final velocity of the 10-kg object after the collision.
Answer:1m/s
Explanation: As the stationary ball is hit by the moving ball ,the two moves together after collision, with a single velocity. The attached photo further explains how the answer is calculated
When stationary ball is hit by the moving ball, both the balls moves together after collision. The final velocity of the object after collision is 1 m/s.
When stationary ball is hit by the moving ball, both the balls moves together after collision
The conservation of momentum,
[tex]\bold {m_1 u_1 + m_2u_2 = (m_1+m_2) V}\\[/tex]
Where,
m1 - initial mass = 20 kg
m2 - final mass =10 kg
u1 - initial velocity = 0 m/s (object at rest)
u2 - final velocity = 3 m/s
V- velocity after collision = ?
Put the values int he formula and calculate for V2,
[tex]\bold { 10 \times 0 + 20 \times 3 = (10+20) V}\\\\\bold {V = \dfrac {30}{30}}\\\\\bold {V = 1\ m/s}[/tex]
Therefore, final velocity of the object after collision is 1 m/s.
To know more about velocity,
https://brainly.com/question/13639113
A 3.10-mm-long, 430 kgkg steel beam extends horizontally from the point where it has been bolted to the framework of a new building under construction. A 69.0 kgkg construction worker stands at the far end of the beam.What is the magnitude of the gravitational torque about the point where the beam is bolted into place?
Answer:
Explanation:
Given that,
The length of the beam L = 3.10m
The mass of the steam beam [tex]m_1[/tex] = 430kg
The mass of worker [tex]m_2[/tex] = 69.0kg
The distance from the fixed point to centre of gravity of beam = [tex]\frac{L}{2}[/tex]
and our length of beam is 3.10m
so the distance from the fixed point to centre of gravity of beam is
[tex]\frac{3.10}{2}=1.55m[/tex]
Then the net torque is
[tex]=-W_sL'-W_wL\\\\=-(W_sL'+W_wL)[/tex]
[tex]W_s[/tex] is the weight of steel rod
[tex]=430\times9.8=4214N[/tex]
[tex]W_w[/tex] is the weight of the worker
[tex]=69\times9.8\\\\=676.2N[/tex]
Torque can now be calculated
[tex]-(4214\times1.55+676.2\times3.9)Nm\\\\-(6531.7+2637.18)Nm\\\\-(9168.88)Nm[/tex]
≅ 9169Nm
Therefore,the magnitude of the torque is 9169NmA car traveling with velocity v is decelerated by a constant acceleration of magnitude a. It takes a time t to come to rest. If its initial velocity were doubled, the time required to stop would
Answer:
If the initial speed is doubled the time is also doubled
Explanation:
You have that a car with velocity v is decelerated by a constant acceleration a in a time t.
You use the following equation to establish the previous situation:
[tex]v'=v-at[/tex] (1)
v': final speed of the car = 0m/s
v: initial speed of the car
From the equation (1) you solve for t and obtain:
[tex]t=\frac{v-v'}{a}=\frac{v}{a}[/tex] (2)
To find the new time that car takesto stop with the new initial velocity you use again the equation (1), as follow:
[tex]v'=v_1-at'[/tex] (3)
v' = 0m/s
v1: new initial speed = 2v
t': new time
You solve the equation (3) for t':
[tex]0=2v-at'\\\\t'=\frac{2v}{a}=2t[/tex]
If the initial speed is doubled the time is also doubled
A 50-kg block is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 150 N. Fp is parallel to the displacement of the block. The coefficient of kinetic friction is 0.25.
a) What is the total work done on the block?
b) If the box started from rest, what is the final speed of the block?
Answer:
a) WT = 137.5 J
b) v2 = 2.34 m/s
Explanation:
a) The total work done on the block is given by the following formula:
[tex]W_T=F_pd-F_fd=(F_p-F_f)d[/tex] (1)
Fp: force parallel to the displacement of the block = 150N
Ff: friction force
d: distance = 5.0 m
Then, you first calculate the friction force by using the following relation:
[tex]F_f=\mu_k N=\mu_k Mg[/tex] (2)
μk: coefficient of kinetic friction = 0.25
M: mass of the block = 50kg
g: gravitational constant = 9.8 m/s^2
Next, you replace the equation (2) into the equation (1) and solve for WT:
[tex]W_T=(F_p-\mu_kMg)d=(150N-(0.25)(50kg)(9.8m/s^2))(5.0m)\\\\W_T=137.5J[/tex]
The work done over the block is 137.5 J
b) If the block started from rest, you can use the following equation to calculate the final speed of the block:
[tex]W_T=\Delta K=\frac{1}{2}M(v_2^2-v_1^2)[/tex] (3)
WT: total work = 137.5 J
v2: final speed = ?
v1: initial speed of the block = 0m/s
You solve the equation (3) for v2:
[tex]v_2=\sqrt{\frac{2W_T}{M}}=\sqrt{\frac{2(137.5J)}{50kg}}=2.34\frac{m}{s}[/tex]
The final speed of the block is 2.34 m/s
A man claims that he can hold onto a 16.0-kg child in a head-on collision as long as he has his seat belt on. Consider this man in a collision in which he is in one of two identical cars each traveling toward the other at 59.0 mi/h relative to the ground. The car in which he rides is brought to rest in 0.05 s.
Find the magnitude of the average force needed to hold onto the child.
N
Answer:
F = -8440.12 N
the magnitude of the average force needed to hold onto the child is 8440.12 N
Explanation:
Given;
Mass of child m = 16 kg
Speed of each car v = 59.0 mi/h = 26.37536 m/s
Time t = 0.05s
Applying the impulse momentum equation;
Impulse = change in momentum
Ft = ∆(mv)
F = ∆(mv)/t
F = m(∆v)/t
Where;
F = force
t = time
m = mass
v = velocity
Since the final speed of the car is zero(at rest) then;
∆v = 0 - v = -26.37536 m/s
Substituting the given values;
F = 16×-26.37536/0.05
F = -8440.1152 N
F = -8440.12 N
the magnitude of the average force needed to hold onto the child is 8440.12 N
Ocean waves of wavelength 30m are moving directly toward a concrete barrier wall at 4.8m/s . The waves reflect from the wall, and the incoming and reflected waves overlap to make a lovely standing wave with an antinode at the wall. (Such waves are a common occurrence in certain places.) A kayaker is bobbing up and down with the water at the first antinode out from the wall.A) How far from the wall is she?B) What is the period of her up and down motion?
Answer:
a)15m
b)6.25s
Explanation:
A) She is ½ a wavelength away, or
d = λ/2 = 30/2 = 15 m
B)Speed of the wave:
V=fλ = λ/T
so,
T=λ/V= 30/4.8
T=6.25s
a) The distance from the wall is 15m
b) The period of her up and down motion is 6.25s
Calculation of the distance and period is:a.
Since Ocean waves of wavelength 30m are moving directly toward a concrete barrier wall at 4.8m/s .
Also,
She is ½ a wavelength away, or
d = λ/2
= 30/2
= 15 m
b)
Here the speed of wave should be used
T=λ/V
= 30/4.8
T=6.25s
Learn more about wavelength here: https://brainly.com/question/13524696
Ideal incompressible water is flowing in a drainage channel of rectangular cross-section. At one point, the width of the channel is 12 m, the depth of water is 6.0 m, and the speed of the flow is 2.5 m/s. At a point downstream, the width has narrowed to 9.0 m, and the depth of water is 8.0 m. What is the speed of the flow at the second point
Answer:
Explanation:
The volume of water flowing per second at two points will be equal as water is incompressible .
A₁ V₁ = A₂ V₂
A₁ and A₂ are cross sectional area at two points and V₁ and V₂ are velocities at the two points
12 x 6 x 2.5 = 9 x 8 x V₂
V₂ = 2.5 m /s .
Hence velocity will remain unchanged .
Which one of the following is closely related to the law of conservation of
energy, which states that energy can be transformed in different ways but can
never be created or destroyed?
O A. Charles's Law
B. Boyle's Law
C. Second law of thermodynamics
O D. First law of thermodynamics
Answer:
D
Explanation:
Answer:
It is D
Explanation: No cap
A motorcycle cover a distance of 1.8 km in 5 minute. calculate its average velocity?
Answer:
6 m/s[tex]solution \\ distance \: travelled = 1.8 \: km \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = 1.8 \times 1000m \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = 1800 \: m \\ time \: taken = 5 \: minute \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = 5 \times 60 \: seconds \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = 300 \: seconds \\ average \: velocity = \frac{distance \: travelled}{time \: taken} \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = \frac{1800}{ 300} \\ \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: = 6 \: {ms}^{ - 1} [/tex]
hope this helps..
Its average speed is (1,800 m) / (300 sec) = 6 m/s .
There's not enough information in the question to calculate the velocity with. We would need to know the straight-line distance and direction from the place he started from to the place he ended at.
The uniform dresser has a weight of 91 lb and rests on a tile floor for which μs = 0.25. If the man pushes on it in the horizontal direction θ = 0∘, determine the smallest magnitude of force F needed to move the dresser. Also, if the man has a weight of 151 lb , determine the smallest coefficient of static friction between his shoes and the floor so that he does not slip.
Answer:
F = 22.75 lb
μ₁ = 0.15
Explanation:
The smallest force required to move the dresser must be equal to the force of friction between the man and the dresser. Therefore,
F = μR
F = μW
where,
F = Smallest force needed to move dresser = ?
μ = coefficient of static friction = 0.25
W = Weight of dresser = 91 lb
Therefore,
F = (0.25)(91 lb)
F = 22.75 lb
Now, for the coefficient of static friction between shoes and floor, we use the same formula but with the mas of the man:
F = μ₁W₁
where,
μ₁ = coefficient of static friction between shoes and floor
W₁ = Weight of man = 151 lb
Therefore,
22.75 lb = μ₁ (151 lb)
μ₁ = 22.75 lb/151 lb
μ₁ = 0.15
Consider the double slit experiment for light. Complete each statement as it would apply to Young's experiment (for each statement select "Increases", "Decreases", or "Cannot be Predicted"). If a variable is not mentioned, consider it to remain unchanged.Required:a. If the distance to the screen decreases, fringe separation:_______?b. If the frequency of the light used increases, fringe separation:_______?c. If the wavelength of the light used decreases, fringe separation:_______?d. For the fringe separation to remain unchanged, wavelength__________ while the distance to the screen decreases.e. If slit separation decreases, fringe separation :_______?f. If slit separation decreases and the distance to the screen decreases, fringe separation :_______?g. If the distance to the screen triples and slit separation doubles, fringe separation :_______?
Answer:
a) DECREASE , b) Decreases , c) DECREASE , d) the wavelength must increase , e) increasses,
Explanation:
Young's double-slit experience is explained for constructive interference by the expression
d sin θ = m λ
as in this case, the measured angles are very small,
tan θ = y / L
tan θ = sin θ / cos θ = sin θ
sin θ= y L
d y / L = m Lam
we can now examine the statements given
a) if the distance to the screen decreases
y = m λ / d L
if L decreases and decreases.
The answer is DECREASE
b) if the frequency increases
the wave speed is
c = λ f
λ = c / f
we substitute
y = (m / d l) c / f
in this case if if the frequency is increased the separation decreases
Decreases
c) If the wavelength decreases
separation decreases
DECREASE
d) if it is desired that the separation does not change while the separation to the Panamanian decreases the wavelength must increase
y = (m / d) lam / L
e) if the parcionero between the slits (d) decreases the separation increases
INCREASES
f) t he gap separation decreases and the distance to the screen decreases so well.
Pattern separation remains constant
when a piece of paper is held with one face perpendicular to a uniform electric field the flux through it is 25N.m^2/c. when the paper is turned 25 degree with respect to the field the flux through it is:
Answer:
22.66Nm²/C
Explanation:
Flux through an electric field is expressed as ϕ = EAcosθ
When a piece of paper is held with one face perpendicular to a uniform electric field the flux through it is 25N.m^2/c. If the paper is turned 25 degree with respect to the field the flux through it can be calculated using the formula.
From the formula above where:
EA = 25N.m^2/C
θ = 25°
ϕ = 25cos 25°
ϕ = 22.66Nm²/C
One uniform ladder of mass 30 kg and 10 m long rests against a frictionless vertical wall and makes an angle of 60o with the floor. A man weighing 700 N could climb up to 7.0 m before slipping. What is the coefficient of static friction between the floor and the ladder
Answer:
μ = 0.37
Explanation:
For this exercise we must use the translational and rotational equilibrium equations.
We set our reference system at the highest point of the ladder where it touches the vertical wall. We assume that counterclockwise rotation is positive
let's write the rotational equilibrium
W₁ x/2 + W₂ x₂ - fr y = 0
where W₁ is the weight of the mass ladder m₁ = 30kg, W₂ is the weight of the man 700 N, let's use trigonometry to find the distances
cos 60 = x / L
where L is the length of the ladder
x = L cos 60
sin 60 = y / L
y = L sin60
the horizontal distance of man is
cos 60 = x2 / 7.0
x2 = 7 cos 60
we substitute
m₁ g L cos 60/2 + W₂ 7 cos 60 - fr L sin60 = 0
fr = (m1 g L cos 60/2 + W2 7 cos 60) / L sin 60
let's calculate
fr = (30 9.8 10 cos 60 2 + 700 7 cos 60) / (10 sin 60)
fr = (735 + 2450) / 8.66
fr = 367.78 N
the friction force has the expression
fr = μ N
write the translational equilibrium equation
N - W₁ -W₂ = 0
N = m₁ g + W₂
N = 30 9.8 + 700
N = 994 N
we clear the friction force from the eucacion
μ = fr / N
μ = 367.78 / 994
μ = 0.37
The larger the push, the larger the change in velocity. This is an example of Newton's Second Law of Motion which states that the acceleration an object experiences is
Answer:
According to Newton's 2nd law
The force acting on a body produces acceleration in its direction which is directly propotional to the force but inversly propotinal to the mass of tbe body.
Explanation:
a = F/m
F = ma
Where( F) is force (m) is mass and (a) is acceleration.
when their center-to-center separation is 50 cm. The spheres are then connected by a thin conducting wire. When the wire is removed, the spheres repel each other with an electrostatic force of 0.2525 N. What were the initial charges on the spheres
Answer:
q1 = 7.6uC , -2.3 uC
q2 = 7.6uC , -2.3 uC
( q1 , q2 ) = ( 7.6 uC , -2.3 uC ) OR ( -2.3 uC , 7.6 uC )
Explanation:
Solution:-
- We have two stationary identical conducting spheres with initial charges ( q1 and q2 ). Such that the force of attraction between them was F = 0.6286 N.
- To model the electrostatic force ( F ) between two stationary charged objects we can apply the Coulomb's Law, which states:
[tex]F = k\frac{|q_1|.|q_2|}{r^2}[/tex]
Where,
k: The coulomb's constant = 8.99*10^9
- Coulomb's law assume the objects as point charges with separation or ( r ) from center to center.
- We can apply the assumption and approximate the spheres as point charges under the basis that charge is uniformly distributed over and inside the sphere.
- Therefore, the force of attraction between the spheres would be:
[tex]\frac{F}{k}*r^2 =| q_1|.|q_2| \\\\\frac{0.6286}{8.99*10^9}*(0.5)^2 = | q_1|.|q_2| \\\\ | q_1|.|q_2| = 1.74805 * 10^-^1^1[/tex] ... Eq 1
- Once, we connect the two spheres with a conducting wire the charges redistribute themselves until the charges on both sphere are equal ( q' ). This is the point when the re-distribution is complete ( current stops in the wire).
- We will apply the principle of conservation of charges. As charge is neither destroyed nor created. Therefore,
[tex]q' + q' = q_1 + q_2\\\\q' = \frac{q_1 + q_2}{2}[/tex]
- Once the conducting wire is connected. The spheres at the same distance of ( r = 0.5m) repel one another. We will again apply the Coulombs Law as follows for the force of repulsion (F = 0.2525 N ) as follows:
[tex]\frac{F}{k}*r^2 = (\frac{q_1 + q_2}{2})^2\\\\\sqrt{\frac{0.2525}{8.99*10^9}*0.5^2} = \frac{q_1 + q_2}{2}\\\\2.64985*10^-^6 = \frac{q_1 + q_2}{2}\\\\q_1 + q_2 = 5.29969*10^-^6[/tex] .. Eq2
- We have two equations with two unknowns. We can solve them simultaneously to solve for initial charges ( q1 and q2 ) as follows:
[tex]-\frac{1.74805*10^-^1^1}{q_2} + q_2 = 5.29969*10^-^6 \\\\q^2_2 - (5.29969*10^-^6)q_2 - 1.74805*10^-^1^1 = 0\\\\q_2 = 0.0000075998, -0.000002300123[/tex]
[tex]q_1 = -\frac{1.74805*10^-^1^1}{-0.0000075998} = -2.3001uC\\\\q_1 = \frac{1.74805*10^-^1^1}{0.000002300123} = 7.59982uC\\[/tex]
The shortest path from a starting point to an endpoint, regardless of the path
taken, is called the
A. vector addition
B. sum
C. shortest vector
D. resultant displacement
Answer:
answer is C shortest vector
Answer:the answer is resultant displacement
Explanation:
disadvantage of vb language
Answer:
visual basics
Explanation:
not suited for programming, slower than the other languages. hard to translate to other operating systems
An ideal, or Carnot, heat pump is used to heat a house to a temperature of 294 K (21 oC). How much work must the pump do to deliver 3000 J of heat into the house (a) on a day when the outdoor temperature is 273 K (0 oC) and (b) on another day when the outdoor temperature is 252 K (-21 oC)
Answer:
a) [tex]W_{in} = 214.286\,J[/tex], b) [tex]W_{in} = 428.571\,J[/tex]
Explanation:
a) The performance of a Carnot heat pump is determined by the Coefficient of Performance, which is equal to the following ratio:
[tex]COP_{HP} = \frac{T_{H}}{T_{H}-T_{L}}[/tex]
Where:
[tex]T_{L}[/tex] - Temperature of surroundings, measured in Kelvin.
[tex]T_{H}[/tex] - Temperature of the house, measured in Kelvin.
Given that [tex]T_{H} = 294\,K[/tex] and [tex]T_{L} = 273\,K[/tex]. The Coefficient of Performance is:
[tex]COP_{HP} = \frac{294\,K}{294\,K-273\,K}[/tex]
[tex]COP_{HP} = 14[/tex]
Besides, the performance of real heat pumps are determined by the following form of the Coefficient of Performance, that is, the ratio of heat received by the house to input work.
[tex]COP_{HP} = \frac{Q_{H}}{W_{in}}[/tex]
The input work to deliver a determined amount of heat to the house:
[tex]W_{in} = \frac{Q_{H}}{COP_{HP}}[/tex]
If [tex]Q_{H} = 3000\,J[/tex] and [tex]COP_{HP} = 14[/tex], the input work that is needed is:
[tex]W_{in} = \frac{3000\,J}{14}[/tex]
[tex]W_{in} = 214.286\,J[/tex]
b) The performance of a Carnot heat pump is determined by the Coefficient of Performance, which is equal to the following ratio:
[tex]COP_{HP} = \frac{T_{H}}{T_{H}-T_{L}}[/tex]
Where:
[tex]T_{L}[/tex] - Temperature of surroundings, measured in Kelvin.
[tex]T_{H}[/tex] - Temperature of the house, measured in Kelvin.
Given that [tex]T_{H} = 294\,K[/tex] and [tex]T_{L} = 252\,K[/tex]. The Coefficient of Performance is:
[tex]COP_{HP} = \frac{294\,K}{294\,K-252\,K}[/tex]
[tex]COP_{HP} = 7[/tex]
Besides, the performance of real heat pumps are determined by the following form of the Coefficient of Performance, that is, the ratio of heat received by the house to input work.
[tex]COP_{HP} = \frac{Q_{H}}{W_{in}}[/tex]
The input work to deliver a determined amount of heat to the house:
[tex]W_{in} = \frac{Q_{H}}{COP_{HP}}[/tex]
If [tex]Q_{H} = 3000\,J[/tex] and [tex]COP_{HP} = 7[/tex], the input work that is needed is:
[tex]W_{in} = \frac{3000\,J}{7}[/tex]
[tex]W_{in} = 428.571\,J[/tex]
How much charge must pass by a point in a wire in 1.5 s for the current inb the wire to be 2.0 A?
Answer:
3 Coulombs
Explanation:
Q = Current x time
Q = 2.0 x 1.5
Q = 3 Coulombs
A rock falls from a vertical cliff that is 4.0 m tall and experiences no significant air resistance as it falls. At what speed will its gravitational potential energy (relative to the base of the cliff) be equal to its kinetic energy
Answer:
About 6.26m/s
Explanation:
[tex]mgh=\dfrac{1}{2}mv^2[/tex]
Divide both sides by mass:
[tex]gh=\dfrac{1}{2}v^2[/tex]
Since the point of equality of kinetic and potential energy will be halfway down the cliff, height will be 4/2=2 meters.
[tex](9.8)(2)=\dfrac{1}{2}v^2 \\\\v^2=39.4 \\\\v\approx 6.26m/s[/tex]
Hope this helps!
The gravitational potential energy (relative to the base of the cliff) be equal to its kinetic energy for speed of rock of 8.85 m/s.
Given data:
The height of vertical cliff is, h = 4.0 m.
Since, we are asked for speed by giving the condition for gravitational potential energy (relative to the base of the cliff) be equal to its kinetic energy. Then we can apply the conservation of energy as,
Kinetic energy = Gravitational potential energy
[tex]\dfrac{1}{2}mv^{2}=mgh[/tex]
Here,
m is the mass of rock.
v is the speed of rock.
g is the gravitational acceleration.
Solving as,
[tex]v=\sqrt{2gh}\\\\v=\sqrt{2 \times 9.8 \times 4.0}\\\\v =8.85 \;\rm m/s[/tex]
Thus, we can conclude that the gravitational potential energy (relative to the base of the cliff) be equal to its kinetic energy for speed of rock of 8.85 m/s.
Learn more about the conservation of energy here:
https://brainly.com/question/15707891
A child of mass 46.2 kg sits on the edge of a merry-go-round with radius 1.9 m and moment of inertia 130.09 kg m2 . The merrygo-round rotates with an angular velocity of 2.4 rad/s. The child then walks towards the center of the merry-go-round and stops at a distance 0.779 m from the center. Now what is the angular velocity of the merry-go-round
Answer:
The angular velocity is [tex]w_f = 4.503 \ rad/s[/tex]
Explanation:
From the question we are told that
The mass of the child is [tex]m_c = 46.2 \ kg[/tex]
The radius of the merry go round is [tex]r = 1.9 \ m[/tex]
The moment of inertia of the merry go round is [tex]I_m = 130.09 \ kg \cdot m^2[/tex]
The angular velocity of the merry-go round is [tex]w = 2.4 \ rad/s[/tex]
The position of the child from the center of the merry-go-round is [tex]x = 0.779 \ m[/tex]
According to the law of angular momentum conservation
The initial angular momentum = final angular momentum
So
[tex]L_i = L_f[/tex]
=> [tex]I_i w_i = I_fw_f[/tex]
Now [tex]I_i[/tex] is the initial moment of inertia of the system which is mathematically represented as
[tex]I_i = I_m + I_{b_1}[/tex]
Where [tex]I_{b_i}[/tex] is the initial moment of inertia of the boy which is mathematically evaluated as
[tex]I_{b_i} = m_c * r[/tex]
substituting values
[tex]I_{b_i} = 46.2 * 1.9^2[/tex]
[tex]I_{b_i} = 166.8 \ kg \cdot m^2[/tex]
Thus
[tex]I_i =130.09 + 166.8[/tex]
[tex]I_i = 296.9 \ kg \cdot m^2[/tex]
Thus
[tex]I_i * w_i =L_i= 296.9 * 2.4[/tex]
[tex]L_i = 712.5 \ kg \cdot m^2/s[/tex]
Now
[tex]I_f = I_m + I_{b_f }[/tex]
Where [tex]I_{b_f}[/tex] is the final moment of inertia of the boy which is mathematically evaluated as
[tex]I_{b_f} = m_c * x[/tex]
substituting values
[tex]I_{b_f} = 46.2 * 0.779^2[/tex]
[tex]I_{b_f} = 28.03 kg \cdot m^2[/tex]
Thus
[tex]I_f = 130.09 + 28.03[/tex]
[tex]I_f = 158.12 \ kg \ m^2[/tex]
Thus
[tex]L_f = 158.12 * w_f[/tex]
Hence
[tex]712.5 = 158.12 * w_f[/tex]
[tex]w_f = 4.503 \ rad/s[/tex]
An account voltage is connected to an RLC series circuit of resistance 5ohms, inductance 3mH, and a capacitor of 0.05f. calculate the resonance frequency
Answer:
12.99 Hz
Explanation:
Resonance is said to occur in an RLC circuit when maximum current is obtained from the circuit. Hence at resonance; XL=XC and Z=R.
XL= inductive reactance, XC= capacitive reactance, Z= impedance, R= resistance
The resonance frequency is given by;
fo= 1/2π√LC
L= 3×10^-3 H
C= 0.05 F
π= 3.142
Substituting values;
fo= 1/2×3.142√3×10^-3 × 0.05
fo= 12.99 Hz
Therefore the resonance frequency of the RLC circuit is 12.99 Hz
2.3mol of monatomic gas A initially has 4700J of thermal energy. It interacts with 2.6mol of monatomic gas B, which initially has 8500J of thermal energy.
Which gas has the higher initial temperature?
Gas A or B?
1-What is the final thermal energy of the gas A?
2-What is the final thermal energy of the gas B?
Answer:
Gas B has the higher initial temperature
6,199 J
7,008 J
Explanation:
Mathematically;
The thermal energy of a gas is given by:
E = 3/2 n kT
Where n is the number of moles, K is the molar gas constant and T is the temperature
For Gas A;
4700 = 1.5 * 2.3 * 8.31 * T
T = 4700/28.6695
Thus, T = 163.94 K
For gas B
8500 = 1.5 * 2.6 * 8.31 * T
T = 8500/32.409
T = 262.27 K
This means that gas B has a higher temperature than gas A.
At equilibrium, temperature
T = naTa + nbTb / (na + nb )
T = [2.3(163.94) + 2.6(262.27)]/(2.3 + 2.6)
T = [377.062 + 681.902]/4.9 = 216.12 K
216.12 K is the equilibrium temperature
= 216.12 K is the equilibrium temperature.
Thus, final thermal energy of Gas A and B
Gas A = 1.5 * 2.3 * 8.314 * 216.12= 6,199 J
Gas B = 1.5 * 2.6 * 8.314 * 216.12 = 7,008 J
The gas that possesses a higher Initial temperature would be:
- Gas B
1). The final thermal energy of gas A would be:
[tex]6,199 J[/tex]
2). The final thermal energy of gas B would be:
[tex]7,008 J[/tex]
Gas A
Given that,
Number of moles [tex]= 2.3 mol[/tex]
Initial Thermal Energy [tex]= 4700 J[/tex]
We can determine T by using
[tex]E = 3/2 n kT[/tex]
with [tex]K[/tex] being constant of molar gas,
[tex]n[/tex] [tex]= number [/tex] [tex]of [/tex] [tex]moles[/tex]
[tex]T = temperature[/tex]
so,
[tex]T = 4700/(1.5 * 2.3 * 8.31k)[/tex]
∵ [tex]T = 163.94 K[/tex]
Gas B
Given that,
Number of moles [tex]= 2.6 mol[/tex]
Initial thermal energy [tex]= 8500 J[/tex]
[tex]T = 8500/(1.5 * 2.6 * 8.31 * T)[/tex]
∵ [tex]T = 262.27 K[/tex]
Thus, gas B has a higher temperature.
To determine final thermal energy, the equilibrium temperature would be determined:
[tex]T = naTa + nbTb / (na + nb )[/tex]
[tex]T = [2.3(163.94) + 2.6(262.27)]/(2.3 + 2.6)[/tex]
∵ [tex]T = 216.12 K[/tex]
1). Final thermal energy of gas A
[tex]= 1.5 * 2.3 * 8.314 * 216.12[/tex]
[tex]= 6,199 J[/tex]
2). Final thermal energy of gas B
[tex]= 1.5 * 2.6 * 8.314 * 216.12[/tex]
[tex]= 7,008 J[/tex]
Learn more about "Thermal Energy" here:
brainly.com/question/16961806
A girl and her bicycle have a total mass of 40 kg. At the top of the hill her speed is 5.0 m/s. The hill is 10 m high and 100 m long. If the force of friction as she rides down the hill is 20 N, what is her speed at the bottom
Answer:
v = 11 m/s is her final speed
Explanation:
work done by gravity = m g Δh = 40×9.8×10 = 3920 Joules
Work done by friction = - force×distance = - 20×100 = - 2000 Joules
[minus sign because friction force is opposite to the direction of motion]
Initial K.E. = (1/2) m u^2 = (1/2) × 40 × 5^2 = 500 Joules
Now, by work energy theorem
Work done = change in kinetic energy.
Final K.E. = initial K.E. + total work = 500 + 3920 - 2000 = 2420 Joules
Now, Final K.E. = (1/2) m v^2 [final speed being v= speed at the bottom]
⇒ 2420 = (1/2)×40×v^2
⇒ 121 = v^ 2
v = 11 m/s is her final speed
Holding force constant, what will be the effect of increasing the Moment arm?
(a) Depends on the direction of the force.
(b) Torque will increase.
(c) Torque is constant.
(d) Torque will decrease.
(e) The direction of rotation will change.
Answer:
(b) Torque will increase.
Explanation:
Torque is given as the product of force and moment arm (radius).
τ = F x r
F = τ / r
where;
F is force
τ is torque
r is radius (moment arm)
Keeping force constant, we will have the following;
τ ∝ r
This shows that torque is directly proportional moment arm (radius), thus increase in moment arm, will cause increase in torque.
For instance;
let the constant force = 5 N
let the initial moment arm, r = 2m
Torque, τ = 5 N x 2m = 10 Nm
When the moment arm is increased to 4 m
Torque, τ = 5 N x 4m = 20 Nm
Therefore, at a constant force, increasing in the Moment arm, will cause increase in torque.
Coorect option is "(b) Torque will increase."
How have physicists played a role in history?
A. Physics has changed the course of the world.
B. History books are written by physicists.
C. Physicists have controlled most governments.
D. Most decisions about wars are made by physicists.
Answer:
A. Physics has changed the course of the world.
Explanation: