Answers
Answer:
1.44 g
Explanation:
From the question given above, the following data were obtained:
Number of mole of HCl = 0.06 mole
Mass of Mg =?
From the question given above, we discovered the number of mole of HCl is equivalent to the number of mole of Mg. Thus,
Number of mole of Mg = number of mole of HCl
Number of mole of Mg = 0.06 mole
Finally, we shall determine the mass of Mg. This can be obtained as follow:
Number of mole of Mg = 0.06 mole
Molar mass of Mg = 24 g/mol
Mass of Mg =?
Mass = mole × molar mass
Mass of Mg = 0.06 × 24
Mass of Mg = 1.44 g
Therefore, the mass of magnesium is 1.44 g
Related Questions
In which phase of wound healing is fibrin most involved?
Answers
Answer:
Finally, coagulation occurs and reinforces the platelet plug with threads of fibrin which are like a molecular binding agent. The hemostasis stage of wound healing happens very quickly.
Explanation:
Hope it helps u
FOLLOW MY ACCOUNT PLS PLS
Which of the following substances can be dissolved in pure water to give a basic solution?
Hydrogen chloride
Sodium bromide
Sodium hydroxide
Sodium chloride
Answers
I think it's sodium hydroxide
Explanation:
sodium hydroxide is a base
HCN
H:C:N:
3.
Is this Lewis Structure correct?
Answers
Answer:
No, your missing some bonds
Suppose the available nutrients in the soil of an ecosystem decrease. Over time, which adaptation is MOST LIKELY to evolve among the plants that survive there?
Answers
Answer:
Root system will become larger or extend farther
Explanation:
If nutrient in soil decrease, the plant's roots system will likely become larger and extend out deeper and farther to get all the nutrients it possibly can
Ice melts after adding heat. The free energy is ————— !
A. Exothermic
B. Not temperature dependent
C. Temperature dependent
D. Depended on how it is heated
E. React with active metals to form h2 gas
F. Endothermic
Answers
Magnesium hydroxide and sodium hydroxide are both strong bases. The pH of a saturated solution of sodium hydroxide is greater than 14. The pH of a saturated
solution of magnesium hydroxide is about 10.2. Why do the solutions have different pH values?
Answers
Answer: Solubility of NaOH is greater and there are more OH- ions in solution.
Explanation: Reactions : NaOH (s) ⇒ Na+ (aq) + OH- (aq)
Mg(OH)2 (s) ⇒ Mg2+ (aq) + 2 OH-(aq)
Although in same amount of moles, Mg(OH)2 produces
two (OH-)-ions in water solution, solubility of Mq(OH)2 is smaller.
Concentration [OH-]ions is smaller in saturated water solution
of Mg(OH)2
A 1 liter solution contains 0.383 M hydrofluoric acid and 0.510 M potassium fluoride.
Addition of 0.096 moles of calcium hydroxide will:
(Assume that the volume does not change upon the addition of calcium hydroxide.)
Raise the pH slightly
Lower the pH slightly
Raise the pH by several units
Lower the pH by several units
Not change the pH
Exceed the buffer capacity
Answers
Answer:
Lower the pH slightly
Explanation:
The mixture of HF, hydrofluoric acid and KF, potassium fluoride produce a buffer that is defined for the equilibrium:
HF(aq) → H⁺(aq) + F⁻(aq)
The buffer can maintain the pH of a solution despite the addition of strong bases or acids.
The reaction of HF with Ca(OH)2 is:
2HF + Ca(OH)2 → 2H2O + CaF2
That means the calcium hydroxide is decreasing the concentration of HF. Based on the equilibrium, the H+ and F- ions will decrease in order to produce more HF. As H+ is decreasing due the equilibrium and not for the addition of a strong base, the pH is decreasing slightly.
Which of the following is true for a gas under conditions of very high pressure? (5
points)
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
2) PV = nRT, because intermolecular forces are considerable at very high
pressures.
3) PV = nRT, because all gases behave as ideal gases at very high pressures.
04) PV = nRT, because the volume of the gas would become negligible.
Answers
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
Explanation:
According to the ideal gas equation; PV = nRT. Let us recall that this equation only holds under ideal conditions.
Gases exhibit ideal behavior under high temperature and low pressure. At higher pressure, the real volume of the gas is larger than the ideal volume of the gas.
Thus, at high pressure, PV > nRT, because the real volume of the gas would be more than the ideal volume.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal volume.
Explanation:
just took the test :)
What cell structure is best represented by the image?
A.
a non-permeable cell wall
B.
a selectively permeable membrane
C.
a waterproof nuclear envelope
D.
a permeable exoskeleton
Answers
Answer:where is the image
Explanation:
Answer:
B.
a selectively permeable membrane
Explanation:
what do adamantium,vibranium and unobtainum have in common
Answers
Answer:
they're all fake
Explanation:
Mercury: Mineral or Not Mineral? Mineral Not Mineral
Answers
Answer:
not a mineral but is a “mineraloid
Explanation:
not mineral
Explanation: its an element but it is not a mineral
A student determines that the theoretical yield of CaCO3, from a precipitation reaction is 21.5 grams
However, this student only recovers 19.9 grams of precipitate through filtration of the solution.
What would be this student's percent yield?
A. 92.6%
B. 0.93%
C. 108%
D. 85.6%
Answers
Answer:
92.6
Explanation:
Do u believe that you are beautiful/handsome?
Yes or No?
Answers
15. Objects can have kinetic energy, potential energy, or both. Energy can be in the form of motion. Energy can
also be stored by objects in various ways, including position, chemical bonds, or physical state.
Which statement is true? And why?
a. An object’s mass has no effect on its potential energy.
b. Potential energy is converted to kinetic energy as a stationary object begins to move.
c. Kinetic energy is converted to potential energy as a stationary object begins to move.
d. A stretched rubber band stores no energy.
Answers
Answer: b because Potential energy is converted to kinetic energy as a stationary object begins to move.
Explanation:
What number should be written in front of Na to balance the equation?
Na + MgCl2 → NaCl + Mg
1
2
3
4
Answers
In order to balance the chemical equation, the coefficient of Na should be 2.
1. How many grams of water are in a cup containing
0.1 moles of H2O?
Answers
Answer:
Explanation:
fdcdf
A community located downwind from a coal-fired power plant has seen a recent increase in the number of dead and dying trees. A so scientist measured values for the following parameters before and after the trees died off. Which of the following oil data should be used to determine if the coalfired power plant emiations were the cause of the damage to the trees
a. Moisture content and water retention
b. Parent material composition
c. Pesticide and herbicide residue levels
d. Calcium and aluminum levels
Answers
Answer:
Option D, Calcium and Aluminum levels
Explanation:
The coal fired power plant releases huge amount of particulate and gaseous emissions such as mercury, sulphur dioxide, nitrogen oxide etc. When there is rain, these gaseous and particulate matter comes to the ground along with rain water and pollute the soil. There are also chances of acid rain due to the presence of sulphur dioxide. Polluted soil and acid rain negatively impact the growth of the plants and causes leaching of Aluminium thereby decreasing the availability of calcium for the plants. Thus, the trees die. Hence, if the amount of Aluminium and Calcium in soil is determined, one can easily deduce the cause of death of trees.
Hence, option D is correct
in writing a chemical equation that produces hydrogen gas, the correct representation of hydrogen gas is
a.H
b.2H
c.H2
d.OH
Answers
Answer:
h2
Explanation:
give an example of a primary income from the rest of the world
Answers
Answer:
(1) Income Associated with the Production Process
(a) Compensation of employees
(b) Taxes and subsidies on products and
production .
(2) Property Income
(a) Investment income:
• Dividends and withdrawals from income of
quasi-corporations
• Reinvested earnings
• Interest
(b) Rent .
I hope this is correct :-)
Give the ratio that balances out the following equation: ___Cr + ___Pb(NO3)4 ---> ___ Cr(NO3)3 + ____ Pb
Answers
Answer: Ratio : 4, 3, 4, 3 are the answers.
Explanation:
I need guidance on this question
Answers
Answer:
(C) NO2 has covalent bonds.
How much heat must be absorbed by 375 grams of water to raise its temperature by 25 degrees Celsius? Specific heat for water= 4.184 J/g/C or K
Answers
Answer:
[tex]3.9*10^4 J[/tex]
Explanation:
See image for explanation!Answer:
[tex]\boxed {\boxed {\sf 39, 225 \ Joules}}}[/tex]
Explanation:
Since we are given the mass, temperature, and specific heat, we should use the following formula to calculate heat energy.
[tex]q=mc \Delta T[/tex]
We have 375 grams of water, the specific heat of water is 4.184 J/g ° C, and the temperature is raised 25 degrees Celsisus. Therefore:
m= 375 g c= 4.184 J/g °C ΔT= 25°CSubstitute the values into the formula.
[tex]q= (375 \ g)(4.184 \ J/g \textdegree C)(25 \textdegree C)[/tex]
Multiply the first two values together. The units of grams will cancel.
[tex]q=1569 \ J/ \textdegree C(25 \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel, so we are left with only the units of Joules.
[tex]q= 39225 \ J[/tex]
39,255 Joules of heat must be absorbed by the water.
How do the equilibrium concentrations of the reactants compare to the equilibrium concentrations of the product?
Answers
Answer: It depends equilibrium constant K
Explanation: You need to to have reaction formula.
If K >> 1 then concentrations of products are much bigger than
concentrations of reactants. If K < < 1, concentration of products is small.
mrs tuckers class is doing an experiment they fill up a cup with ice water they measure the temperature of both the water and the classroom after one hour . what will mrs tucker observe about the temperature of ice water after one hour
A. The temperature will increase
B. The temperature Will remain the same
C. The temperature will decrease greatly
D. The temperature Will decrease slightly
Answers
Hope this is the correct answer
Answer:
Ofc D. bc if the temp decreases, that means it is getting colder u dummy! But if it increases, it is getting warmer.
Explanation:
I got it right on USATestprep for using common sense, mark me the brainliest.
A 251 ml sample of 0.45M HCl is added to 455 mL of distilled water. What is the molarity of the
final solution?
Answers
We are given:
251 mL sample of 0.45M HCl added to 455 mL distilled water
Whack a mole! (finding the number of moles):
We know that in order to find molarity, we use the formula:
Molarity = number of moles / Volume (in L)
so, number of moles is:
Number of moles = Molarity * Volume(in L)
now let's plug the values for the HCl solution to find the number of moles
Number of moles = 0.45M * 0.251 L
Number of moles = 0.113 moles
Time to concentrate (finding the final concentration):
Total final volume = 251 mL + 455 mL = 706 mL = 0.706 L
Number of moles of HCl = 0.113 moles
Molarity = Number of moles / Volume (in L)
Molarity = 0.113 / 0.706
Molarity = 0.16 M
___________________________________________________________
BONUS METHOD TIME!!!
We know the relation:
M1 * V1 = M2 * V2
where M1 and M2 are the initial and final molarities and V1 and V2 are initial and final volumes respectively
notice that I didn't mention that the volume has to be in Liters, that's because of the units being concerned with both sides of the equation, say I have the volume in mL and want to convert both these volumes to L, I would divide both sides by 1000, which would NOT change the overall value
Now, plugging values in this equation
(0.45) * (251) = (251 + 455)* (M2)
112.95 = (706)(M2)
M2 = 112.97/706 [dividing both sides by 706]
M2 = 0.16 Molar
Isoniazid is used in the treatment of tuberculosis and multiple sclerosis. Identify each lone pair as either localized or delocalized. Justify your answer in each case.
Answers
Answer:
Please find the complete question and its solution in the attached file:
Explanation:
Food Science is the study of the physical, biological, and chemical makeup of food; the
causes of food deterioration; and the concepts ulderlying food processing.
True
False
Answers
How many moles are in 3.72 x 10^27 atoms of iron?
Answers
Answer: There are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] atoms present in one mole of a substance.
Hence, moles present in [tex]3.72 \times 10^{27}[/tex] atoms are calculated as follows.
[tex]Moles = \frac{3.72 \times 10^{27}}{6.022 \times 10^{23}}\\= 0.617 \times 10^{4} mol[/tex]
Thus, we can conclude that there are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
How many electrons are in the highest occupied energy level of a neutral chlorine atom?
Answers
What compound(s) does pure water contain?