what is the cause of down syndrome
Answer:
there is multiple causes is this an acual question??????
Explanation:
Which change is an environmental effect of farming?
a.temperature increase
b.soil erosion
c.habitat succession
d.natural disasters
Answer:
it is probably b.
Explanation:
hope this helps :)
The combination of fibers and ground substance in fluid connective tissue is known as
A) ground substance
B) fat
C) cytosol
D) plasma
In fruit flies, curved wings (w) are recessive to the dominant straight wings (W), and ebony body (b) is recessive to the dominant gray body (B). A fly that has curved wings and ebony body is crossed with a fly that has straight wings and gray body. Of the offspring there were approximately equal numbers of straight gray, straight ebony, curved gray, curved ebony. What are the genotypes of the parents and offspring
Answer:
The correct answer =
parents : WwBb x wwbb
offspring :
WwBb, Wwbb, wwBb, and wwbb
Explanation:
It is given that the straight wings (W) is dominant over curved wings (w) and the ebony body (b) is recessive to the dominant gray body (B) and there is a cross between curved wings and ebony body and straight wings and gray body is made. The phenotypic ratio is: 1:1:1:1 for the four different phenotypes straight gray, straight ebony, curved gray, curved ebony.
It is not given the genotype of parents, however, for the curved and ebony fly, it is clear that both alleles are recessive as recessive alleles only appear in absence of the dominant allele of the trait.
For another parent, the possible genotypes can be WWBB or WwBb, however in the case of WWBB the phenotypic ratio would not be equal therefore,
crossing WwBb x wwbb
This can be represented in the form of a punnett square as below:
wb wb wb wb
WB WwBb WwBb WwBb WwBb Straight wing, Gray body
Wb Wwbb Wwbb Wwbb Wwbb Straight wing, Ebony body
wB wwBb wwBb wwBb wwBb Curved wing, Gray body
wb wwbb wwbb wwbb wwbb Curved wing, Ebony Body
The phenotypic ratio is: 1:1:1:1 for the four different phenotypes
2. Something an organism does in response to a change in its environment 2 poin
to ensure its survival. *
Structural adaptation
Functional apadtation
Behavioral adaptation
Mutual adpatation
Answer:
3. Behavioral adaptation
Explanation:
The environment is what helps everything live, which means that its behavior changes according to it's surroundings, such as a bear hibernating in the winter, that is its behavior because it is cold, and food is very hard to find, unlike in the summer and spring where food is everywhere, so the only choice the bear has is to collect as much food as it can before winter comes in.
A scientist is studying metabolic rate in a Giant Hummingbird in Peru. The scientist assumes a captured individual has been feeding on nectar (glucose) recently, but in fact the individual has not fed in the last hour and is currently metabolizing fat (palmitic acid). 3. Calculate the measurement error the scientist would introduce based on their faulty assumption if the scientist were measuring CO2 production. Will the scientist over- or underestimate metabolic rate
Answer:
Yes.
Explanation:
Yes, the scientist underestimate the metabolic rate of Giant Hummingbird. The scientist experience the measurement error due to non-feeding of Giant Hummingbird that leads to faulty assumption when the scientist were measuring CO2 production because the Giant Hummingbird breakdown the fats of the body for the release of energy instead of glucose. There is difference in the production of carbondioxide rate due to difference in the composition of fats and glucose.
Which unhealthy condition30 point would most likely result from a person eating too much food for many years?
Answer:
Conditions such as obesity, stroke, high blood pressure, heart disease, and diabetes can occur to someone who eats too much unhealthy food for many years.
Drag the tiles to the correct boxes to complete the pairs.
Identify the types of inheritance based on the expression of alleles in the organism.
Answer:
Presence of many alleles for the trait to be expressed --> Multiple
Presence of two alleles for the trait to be expressed --> recessive
Presence of a single allele for the trait to be expressed --> dominant
Answer:
Presence of two alleles for the trait to be expressed: recessive
Presence of many alleles for the trait to be expressed: multiple
Presence of a single allele for the trait to be expressed: dominant
Explanation:
Edmentum
Where are diploid cells found ?
A. only in reproductive organs
B. only in twin siblings
C. through out the body
D. only in the lungs
Answer:
c
Explanation:
diploid cells are cell that have 2 genetic alleles, one from your mom and one from dad, so all your cells are diploid, except haploid cells in the rep system.
Using this illustration as a guide, indicate the level one would need to drill to gain a sample containing the highest ratio of parent rock in comparison with organic material.
horizon C
horizon A
horizon B
horizon O
Answer:
horizon C
Explanation:
The horizon C has the highest ratio of parent rock as compared to organic matter. This horizon starts after horizon B and present above the bed rock. This horizon consists of weathered and partially decomposed rocks. It is the actual layer of soil of that place whereas the other horizon A and B comes with the passage of time when the wind bring the soil particles and these particles deposits on this layer of the soil making horizon A and B.
When two parents join to form a new individual-
Offspring will NOT be identical to one parent.
It will have traits from both parents
Both A and C
Offspring will be identical to one parent.
Help please!!
Answer:
"B"
Explanation:
It will have both traits from both parents.
What part of meiosis involves the splitting of 2 cells to make 4 total cells
Answer:
Meiosis II
Explanation:
During Meiosis II, the 2 cells were split into 4 cells, each with 23 chromosomes.
You are studying a new gene "X" that you think controls skin color in Bearded Dragons. In order to determine what gene X does you need lots of gene X DNA to work with. So, you decide to amplify it through the process known as PCR. You have a forward and a reverse primer that have been designed to gene Xf – a gene in frogs that is similar to the one found in the Bearded Dragon. You are pretty sure that these two primers will work in Bearded Dragons, so you decide to go ahead with the PCR. In frogs, the Forward Xf primer binds gene Xf between nucleotides 32 and 47. The Reverse Xf primer binds between nucleotides 1110 and 1135. What size PCR product would these two primers create if they amplified the frog gene Xfp
Answer:
The correct answer is - 1103 bp.
Explanation:
PCR or polymerase chain reaction is a process that uses a primer to amplifying the desired segments of DNA molecules. It is a technique that can amplify a million copies of the DNA segment.
given:
forward primer binds from - 32 to 47
reverse primer binds from - 1135 to 1110
PCR product would be between - 32 to 1135
So, product size would = 1135-32 = 1103.
Thus, the correct answer is - 1103.
Consider a breeder that mates two heterozygous black Staffordshire bull terriers over the course of three years. The dam eventually produces 16 puppies: 11 are black like the parents, 4 turn out white, and 1 turns out gray colored. As a genetics student, what do you think of this outcome
Answer:
Different colour occur due to heterozygous nature.
Explanation:
Most of the puppies just like parents because the black colour gene or allele is dominant over other colour allele whereas other colour puppies also formed due to presence of heterozygous type of alleles. Other colour occurs due to appearance of recessive allele in the physique of the offspring or formation of hybrids occurs which causes colour other than black and white in the offspring. In the F1 generation all the offspring resembles to the male parent but after this generation some offspring resembles to male, some are hybrids and other resembles to female.
22) During durg adminsteration not necesary tell
to the patient
A) Prupase of durg
B) Side effect of durg
C) Route of mrdication
what is a false scorpion
Answer:
huh im not prcicley undertsa
Answer:
A pseudoscorpion, also known as a false scorpion or book scorpion, is an arachnid belonging to the order Pseudoscorpiones, also known as Pseudoscorpionida or Chelonethida. Despite their appearance to true scorpions and ticks, they are NOT harmful to people. Physical removal is the only necessary control.
Explanation:
A cleft chin in humans is coded by the dominant allele C. A chin without a cleft is coded by the recessive allele c. A man with a cc allele combination for the trait produces a zygote with a woman with a Cc allele combination for the trait. Which allele combinations could occur in the zygote?
Answer:
The allele combinations are: Cc, cc, Cc, cc
Phenotypically there is a 50% chance that the child will be born with or without the cleft
The allele combinations that could occur in the zygote is Cc or cc.
What is an allele combination?An identification of the specific alleles found at each of the relevant mouse loci on the two homologous chromosomes (i.e., all allele pairs of a genotype). One or more allele pairs can make up an allele combination.
Genetic linkage is the capacity of a chromosome to transmit alleles that are near to one another as a whole unit through meiosis. Inheritance of traits is also understood by this principle. It is useful in locating the genes that are in charge of characteristics and diseases.
The person is homozygous for the allele if the two alleles are the same. The person is heterozygous if the alleles are different.
Therefore, the zygote may include the allele combinations Cc or cc.
To learn more about allele combination, visit here:
https://brainly.com/question/17512033
#SPJ6
Which argument is BEST supported by the
information given?
A. The earthworm and lizard evolved at the same
time because of the absence of legs and hair.
B. The lizard and humans share a common
ancestor because of the presence of a
backbone and legs.
C. The trout and humans share a common
ancestor because of the presence of a
backbone.
D. Earthworms were the most recent to evolve
because of the absence of the derived
characteristics.
Answer:
B
Explanation:
It tells us a lot about why the argument is correct.
In a flower, the anther is attached to filament. What advantage does the filament provide to the anther?
A. The filament elevates the anther to allow for easier transport of pollen by wind or insects.
B. The filament provides the anther with nutrients to produce pollen grains.
C. The filament protects the anther from harsh sunlight and insects.
D. The filament produces a sticky surface to allow the anther to capture pollen.
The correct answer is A. The filament elevates the anther to allow for easier transport of pollen by wind or insects.
Explanation
The filament of a flower is the sterile part of the stamen (male organ of the flower) that is located just below the anther. Its function is structural to hold the sling so that it is accessible to insects. The filament is usually cylindrical and fine. Therefore, the correct answer is A. The filament elevates the anther to allow for easier transport of pollen by wind or insects.
what is a cell membrane and its functions
Answer:
The cell membrane is a strip of membrane around the cell and it keeps bad things from entering the cell
Explanation:
Evergreen broadleaf trees, along with abundant rain, warm temperatures, and consistent day length, characterize the _ biome.
Answer:
Rainforest biome (tropical rainforest)
Explanation:
The characteristics of the tropical rainforest biome are:
Located in humid and warm regions of equatorial climate.Medium temperature among 18 and 30 ºCAnnual precipitation is around 1000 and 8000 millimeters. Precipitation levels are never inferior to 1500 mm. There is no dry season, or if there is, it is too short. There is no hydric deficit. Fanerophic species dominate in this biome. Evergreen tall trees might reach up to 50 meters in height. They develop dense foliation and branches, becoming a refuge and source of food for many species. Vegetation does not need to develop strategies for surviving the dry season. Instead, they need to develop strategies for competing for light and nutrients. We can find different species of plants such as epiphytes, lianas, stranglers, aerial-rooted pants, tabular-rooted plants, among other vegetation forms. Tropical and subtropical rainforests might differentiate from each other in latitude and seasonality. Tropical rainforests might be found in latitudes of the Capricorn and Cancer tropics. From cero to ten degrees latitude. They are in America, Africa, and Asia continents. It is the biome with the greatest biodiversity on the planet. Rainforests have an extraordinary richness of animals and plants.
What is fermentation? Select all that apply.
process that breaks down larger molecules
into smaller molecules
process that uses oxygen to create usable
energy for the body
process that does not rely on the presence of
oxygen
process that creates waste products
Answer:
Option One
Option Three
Option Four
Explanation:
Fermentation is the process of breaking down substances different types of bacteria or microorganisms will producing heat, this process can also be completed without the usage of oxygen. Finally, fermentation is used to create alcohol like wine or beer which is considered wastes to the body. Therefore options one, three, and four are your answers or "process that breaks down larger molecules into smaller molecules, energy for the body process that does not rely on the presence of oxygen, and process that creates waste products."
Hope this helps.
Environmental scientists calculating pollutant half-lives often define a transport rate constant that is analogous to a reaction rate constant and describes how a pollutant moves out of an ecosystem. In a study of the gasoline additive MTBE in Donner Lake, California, scientists from the University of California, Davis, found that in the summer the half-life of MTBE in the lake was 26.01 days. Assume that the transport process is first order. What was the transport rate constant of MTBE out of Donner Lake during the study
Answer:
k ≈ [tex]2.7 *10^{-2} d^{-1}[/tex]
Explanation:
For a first order reaction
Half life ( [tex]t_{1/2}[/tex] ) = 0.693 / k
k = rate constant
[tex]t_{1/2}[/tex] = 26.01
hence k = 0.693 / ( 26.01)
k ≈ 2.7 * 10^-2 d^-1
This is a detailed simple solution as required
Granite has only recently been exposed at a location on Earth’s surface. What will need to happen first in order for granite to become sedimentary rock?
Answer:
Granite has only recently been exposed at a location on Earth's surface. What will need to happen first in order for granite to become sedimentary rock? A thick layer of humus must form on top of the granite. The granite must be broken into smaller pieces by weathering processes.
Explanation: hope this helps dude
How does the process of binary fission work in the asexual reproduction of bacteria?
A. Two cells join to become one larger cell
B. One cell splits into two cells with identical DNA.
O. DNA material from the environment is added to the cell.
D. Bacteria can only reproduce via sexual reproduction, not asexual reproduction,
The process of binary fission work as 'one cell splits into two cells with identical DNA. in the asexual reproduction of bacteria'.
So, option B is correct one.
What is binary fission?The simplest meaning of binary fission is division into two. The binary fission is the most common methods of asexual reproduction.In biological , division of single entity into two or more parts and regenerates of these parts again and each parts have potential to grow to the size of the original cell.Binary fission occurs in Amoeba which is unicellular organismThe binary fission is type of asexual reproduction.What is asexual reproduction of bacteria
The bacteria is prokaryotic organisms that reproduce asexually and bacteria is mainly reproduce by binary fission in which single cell divides into two .
There are some bacteria which divides in every 10 to 15 minutes .
learn about binary fission
https://brainly.com/question/7639952
#SPJ2
what do you call a soft ,heated mass of crushed leaves and other substances that spread over the skin to treat swelling or pain ?
a.bandage
b.ointment
c.poultice
d.solution
the community interact with the air water soil sunlight and other non living things in its surrounding is what we call
Explanation:
non living things in their environment are called "matrix" its environment is what supports living and non living things...
Which has the highest density?
A. water at 0°C
B. water at 4°C
C. water at 6°C
D. water at 8°C
help plz.............
Explanation:
c. I think at least sorry if its wrong
Why is the 3-dimensional shape of a macromolecule (ex: protein) important to know from the perspective of understanding
the molecular basis of human disease? 2 pts
A/ Mutations in genes that cause a change in amino acid primary sequence can cause a change in the protein's function in a
cell. For example, it can cause the protein to mislocalize; the protein is now recruited to a specific site in the cell, like the
nucleus, where it can cause cellular dysfunction.
B/ If the protein is an enzyme, the 3-dimensional shape of the active site can be altered and decrease the rate of a reaction that
is catalyzed by that enzyme.
C/ If the protein is an enzyme, the 3-dimensional shape of the active site can be altered and increase the rate of a reaction that
is catalyzed by that enzyme.
D/ Only options A and B may be true.
F/Antions A, B and C may be true.
Answer:
A, B and C may be true
Explanation:
The three-dimensional structure (3D) of a protein, also known as tertiary structure, is critical to its function. In general, the 3D protein structure consists of alpha-helix and beta-sheets (secondary structures) associated through disordered coiled-coil regions. Genetic mutations may cause modifications in the 3D protein structure by modifying amino acids that are added to the growing polypeptide chain during the process of translation. In consequence, the relationships among amino acids (i.e., the intermolecular attractive forces that hold them together) may also be altered by these mutations. In general, mutations that generate amino acid changes at the active site of the enzyme will have a deleterious effect, thereby decreasing or inactivating protein function. However, there are situations where a mutation may be beneficial and can eventually increase the rate of reaction of a protein.