Answer: By squeezing the balloon, you reduce the space the gas particles can occupy. As the particles are pushed a bit closer together, they collide with more, so the pressure from the moving gas particles increases. If the volume increases, its pressure decreases.
Look at the diagram shown below. The reading on ammeter 1 is 0.15 A. What will the reading on ammeter 2 be
There's no way to tell, without knowing the resistance of either X-1 or X-2, or the reading on A3.
if 20 boys can sweep the school compound in 8 minutes, how many boys can sweep it in 10minutes
Answer:
So this is just a ratio/proportion problem
so lets say its in boys:minutes
so in the first scenario
20:8
and we want to find
x:10
So proportion really
20/8=x/10
cross multiply
25
25 boys can sweep it in 10 minutes
the following can increase the amount of friction in the surface, except ______.
a. glue
b. paper
c. lubricant
d. foil
Answer:
c. lubricant..........
Mercury’s natural state is where the atoms are close to each other but are still free to pass by each other. In which state(s) could mercury naturally exist?
Answer:
Mercury's natural state is where the atoms are close to each other but are still free to pass by each other. In which state(s) could mercury naturally exist?
Liquid is the answer
Explanation:
Fuses of ________________________
a. same kind are used for different purposes
b. different kind are used for different purposes
c. both of the above are correct
d. none of these
Answer:
C
Explanation:
fuses of same kind can be used for different things, and of different kinds could be used for different things as well.
Image credit: The Hubble Heritage Team (AURASTSCI/NASA)
To which category does galaxy #2 belong? Why does it belong in this category?
WRITER
Can i ask u a question
how to do the next ques for moreBrainliest me please
How much potential energy did the the milkshake have after it fell off of the counter, just before it hit the ground (at the bottom)? Make sure to write the correct units with
your answer!
Answer:
The formula for potential energy depends on the force acting on the two objects. For the gravitational force the formula is P.E. = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m / s2 at the surface of the earth) and h is the height in meters.
A rock on the moon has 0.5kg. It is brought to Earth where the gravitational field is stronger. On Earth, the rock will have:
a) Less mass and same weight
b) The same mass and more weight
c) Less mass and less weight
d) The same mass and same weight
Answer:
Explanation:
It will be B.
The correct answer is the same mass and less weight.
What happens to the weight of an object when it is brought from the moon to the Earth?
The weight decreases. Your weight will be 1/6 of the weight on the moon that you had on Earth. This is because the mass of the moon is less hence the gravitational pull is very low compared to Earth.
What happens to the mass of an object when you take it to the moon?
Therefore, the mass of an object on the Moon remains the same as its mass on Earth. But its weight gets less because the gravity on the moon is less than on the Earth.
Learn more about gravitational pull here: brainly.com/question/4208016
#SPJ2
3. What happens if an object has a negative acceleration?
Answer:
They will go backwards?
Explanation:
If positive they go forward but is negative they go backwards.
A. Read these sentences carefully. Choose the correct form of adjectives.
1. Solomon is the
king of all.
a wise
b. wiser
c. wisest
2. Yogurt is
than candies.
a delicious b. more delicious c. most delicious
3. Mayon Volcano is the
volcano for me.
a most majestic b. more majestic
c. majestic
4 My father is an
man
a industrious b. more industrious c. most industrious
5. I was the
when my friend graduated with honors.
a happy b. happier
c. happiest
Answer:
1. wisest
2. more delicious
3. majestic (not sure about this one)
4. industrious
5. happiest
Block 1, of mass m1, moves across a frictionless surface with speed ui. It collides elastically with block 2, of mass m2, which is at rest (vi=0). (Figure 1)After the collision, block 1 moves with speed uf, while block 2 moves with speed vf. Assume that m1>m2, so that after the collision, the two objects move off in the direction of the first object before the collision. What is the final speed vf of block 2?
The conservation of the momentum allows to find the velocity of the second body after the elastic collision is:
[tex]v_f = \frac{2u_o}{1- \frac{m_2}{m_1} }[/tex]
the momentum is defined by the product of the mass and the velocity of the body.
p = mv
The bold letters indicate vectors, p is the moment, m the mass and v the velocity of the body.
If the system is isolated, the forces during the collision are internal and the it is conserved. Let's find the momentum is two instants.
Initial instant. Before crash.
p₀ = m₁ u₀ + 0
Final moment. After crash.
[tex]p_f = m_1 u_f + m_2 v_f[/tex]
The momentum is preserved.
p₀ = [tex]p_f[/tex]
[tex]m_1 u_o = m_1 u_f + m_2 v_f[/tex]
Since the collision is elastic, the kinetic energy is conserved.
K₀ = [tex]K_f[/tex]
½ m₁ u₀² = ½ m₁ [tex]u_f^2[/tex] + ½ m₂ [tex]v_f^2[/tex]
Let's write our system of equations.
[tex]m_1 u_o = m_1 u_f + m_2 v_f \\m_1 u_o^2 = m_1 u_f^2 + m_2 v_f^2[/tex]
Let's solve
[tex]u_f = u_o - \frac{m_2}{m_2} \ v_f \\u_f^2 = u_o^2 - \frac{m_2}{m_1} \ v_f^2[/tex]
[tex]( u_o - \frac{m_2}{m_1} v_f)^2 = u_o - \frac{m_2}{m_1} \ v_f^2 \\u_o^2 - 2 \frac{m_2}{m_1} \ u_o v_f + (\frac{m_2}{m_1} )^2 v_f^2 = u_o^2 - \frac{m_2 }{m_1} \ v_f^2[/tex]
[tex]2 \frac{m_2}{m_1} \ u_o = \frac{m_2}{m_1} v_f \ ( 1 - \frac{m_2}{m_1}) \\v_f = \frac{2u_o}{1-\frac{m_2}{m_1} }[/tex]
In conclusion, using the conservation of momentum, we can find the velocity of the second body after the elastic collision is:
[tex]v_f = \frac{2u_o}{1-\frac{m_2}{m_1} }[/tex]
Learn more here: brainly.com/question/8351094
A car goes from 60 m/s to 75 m/s in 10 seconds.calculate the car’s acceleration?
Explanation:
Uhhhh here is an example
a=vt. =27 m/s10 s. =2.7 m/s2.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Acceleration of the car is ~
[tex] \boxed{1.5 \: \: m/s}[/tex]
[tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]
We know that,
Acceleration = rate of change in velocity ~
that is ~
[tex]a = \dfrac{v - u}{t} [/tex]where,
v = final velocityu = initial velocity t = time taken ~now, let's solve ~
[tex]a = \dfrac{75 - 60}{10} [/tex][tex]a = \dfrac{15}{10} [/tex][tex]a = 1.5 \: \: m/s[/tex]Which is the BEST example of physics in the body?
A. a single beat of the heart
B. how the circulatory system works
с. balance when the body is standing still
D. the movement of an arm throwing a ball
The best example of physics in the body is the movement of an arm throwing a ball. The correct option is D.
What is physics?Physics is the branch of science that studies the structure of matter and how the universe's fundamental constituents interact.
It investigates objects ranging from the very small to the entire universe using quantum mechanics and general relativity.
Physics is the natural science that investigates matter, its fundamental constituents, its motion and behavior in space and time, as well as the related entities of energy and force.
Physics is one of the most fundamental scientific disciplines, with the primary goal of understanding how the universe functions.
The movement of an arm throwing a ball is the best example of physics in the body.
Thus, the correct option is D.
For more details regarding physics, visit:
https://brainly.com/question/28600368
#SPJ2
Which statement describes the flow of heat? Question 8 options: Heat moves from a warmer object to a cooler object. Heat moves from a cooler object to a warmer object. Heat moves from a cooler object to a warmer object. Heat moves only between two cold objects.
Answer:
A
Explanation:
How much work is done when a force of 33 N pulls a wagon 13 meters?
*Round your answer to the nearest whole number.
Answer:
Work = (force) x (distance)
Work = (33N) x (13m) = 429 N-m = 429 joules
IF the force is in exactly the same direction as the motion of the wagon.
Explanation:
pa mark ng brainliest
Compare and contrast instantaneous and average speed.
Answer:
instantaneous velocity is a velocity covered at an instant while average velocity is the change in distance/ the change in time taken
which is not a general characteristic of starburst galaxies?
Starburst galaxies is simply known as the rate at which the galaxy is now converting gas into stars. The statement that is not a general characteristic of starburst galaxies is that The "starburst" is thought to be caused by the presence of a supermassive black hole in the galaxy's center.
The starburst galaxy is also regarded as the free quantity of gas with which stars can be formed.They are known to be rare. A starburst is known to be an astrophysical process. It is the process of star formation happening at a rate that is large when compared to the rate that is often observed.
See full question below
Which is not a general characteristic of starburst galaxies?
The "starburst" is thought to be caused by the presence of a supermassive black hole in the galaxy's center. The observed features that us to classily a galaxy as a 'starburst" galaxy must be only temporaryphenomena in the galaxy' Supernovae occur so frequently that their effects combine to drive a galactic wind that blows material into intergalactic space. The galaxy's rate of star formation is many times higher than the rate of star formation in the Milky WayLearn more from
https://brainly.com/question/6939136
HELPPPPPPPPPPPPPPPPPPP
Answer:
directly proportional
Explanation:
if you exert a force on an object, but the object remains stationary as you apply the force, then how much work have you done on the object?
Answer:
no work done
Explanation:
unless you moved the object
When we apply a force on an object, but the object remains at rest when the force is applied, then we have zero work done on the object because the object does not move.
What is Work done?Work done by a force is defined as the product of the displacement and the component of the force exerted by the object in the direction of displacement. Work done is expressed as:
Work done= Force* Displacement
When an object is at rest, there is no external force on it except gravity acting on it, in which case work will be zero because the force acting on it is perpendicular. Thus displacement is zero and if displacement is zero then work done will be zero.
Suppose that displacement is zero then,
W=f×0
Work done is zero
Thus, the work done is zero.
Learn more about Work done, here:
https://brainly.com/question/13662169
#SPJ2
A rock excerts a pressure of 20 N/cm^2 on the ground. what does 20N/cm^2 mean?
A force of __________ acts on each _________ of area
Answer:
A force of 20N acts on each cm^2 of area
2hrt 20 min +60 sec
Answer:
2hr 21 min
Explanation:
0 days 2 hours 20 minutes 0 seconds
+ 0 days 0 hours 0 minutes 60 seconds
= 0 days 2 hours 21 minutes 0 seconds
Which will be different on the moon than it is on Earth?
weight
mass
Answer:
Below
Explanation:
On the moon, an objects weight will be different than it is on earth. This is because we cannot change the mass of an object, the mass of an object is the measure of matter an object has. However the weight is depended on the gravitational pull of whatever planet you are on. In this case, weight will be lighter on the moon than it is on earth because the moon's gravitational pull is 1.62 m/s^2 while earths is around 9.8 m/s^2.
Hope that helps!
1. A stone is thrown vertically upward with velocity of 15 m/s at the same time, 10 m vertically above a second stone is allowed to fall. After what time and at what height do they collide (take g = 10 ms^-2)
Let the ball at the ground be A and that at the top be B.
Assume that you see the motion of A while sitting at B.
You(B) are obviously at rest w.r.t. yourselves. However you(B) and A have the same acceleration in the same direction. Thus acceleration of A w.r.t. you(B) is 0.
Thus, to you, it will appear as if A is travelling towards you with an uniform speed of 20m/s.
Dividing the distance 20m with that speed, we get that A reaches you(B) in 1s.
Now, you have considered these motions and time by assuming you were stationed at B. However, the time taken for A to meet B shouldn't be dependent on which reference frame you assume. Thus, time taken for A and B to collide is 1s.
Since B falls freely, he covers a distance of 1/2(g)(1²)=5 (assuming g = 10m/s²)
Thus, they meet at a height of (20–5)m = 15m from the ground.
The spark plugs are threaded into the top of each cylinder and provide a place for the spark to jump within the ________.
Answer:
"the spark plug gap"
The plug provides a gap between the input voltage and the ground supplied by the car chassis.
You and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes. What distance must she travel so the two of you can travel at the same speed?
Answer:
60 N.C
Explanation:
The box will move in the direction of the push and pull with a force of 60 N. C.
If you and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes. , then the distance must she travel so the two of you can travel at the same speed would be 30 feet.
What is speed?The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.
As given in the problem If you and your friend are pushing a box at the same constant speed. You pushed 20 feet in 10 minutes, your friend was pushing for 5 minutes.
The distance traveled by box = 20 + 10
= 30 feets
Thus, the distance must she travel so the two of you can travel at the same speed would be 30 feet.
To learn more about speed here, refer to the link given below ;
brainly.com/question/7359669
#SPJ2
A block with initial velocity of 3 m/s slides 9 m across a rough horizontal surface before coming to rest. What is the coefficient of kinetic
friction?
The coefficient of kinetic friction between the block and the horizontal surface is 0.051.
The given parameters;
initial velocity, u = 3 m/sdistance traveled by the block, s = 9 mThe acceleration of the block is calculated as follows;
[tex]v^2 = u^2 + 2(-a)s\\\\v^2 = u^2 - 2as\\\\a = \frac{u^2 - v^2}{2s} \\\\a = \frac{3^2 - 0^2}{2\times 9} \\\\a =0.5 \ m/s^2[/tex]
The coefficient of kinetic friction between the block and the horizontal surface is calculated as follows;
[tex]\mu_k mg = ma\\\\\mu_k = \frac{a}{g} \\\\\mu_k = \frac{0.5}{9.8} \\\\\mu_k = 0.051[/tex]
Learn more here:https://brainly.com/question/19454558
Suppose measure the mass of an orange. Then you peel the orange and separate out the slices. If you measure the orange peel and all the slices, will that mass equal the mass of the whole orange?
yes
no
The mass of the orange after it has been cut into pieces will still remain the same as the mass of the whole orange.
Let us recall that the law of conservation of mass states that, mass can neither be created nor destroyed but is converted from one form to another. In accordance with this law of conservation of mass. The mass of the orange must remain the same after it has been cut in pieces.
Hence, If the mass of an orange is measured after it has been cut into pieces, the mass of the orange after it has been cut into pieces will still remain the same as the mass of the whole orange.
Learn more: https://brainly.com/question/865531
Two cars a and b are moving along a straight road in the same direction with velocities of 25km/h and 40km/h . Find the velocity of car b relative to car a
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
Two cars A and B are moving along a straight road in the OPPOSITE direction with velocities of 25 km/h and 40 km/h, respectively. Find the velocity of car B relative to car
Answer:
65km/h
Explanation:
Here,
Relative velocity of car moving in different directions with different velocities =Va + Vb
=25+40
=65 km/h
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
I need to know how to draw the diagram of the last two questions
Answer
In the parallel circuit, you have to position the switch on only one of the loops.