Answer: The ratio of mass of sulfur atom to mass of oxygen atom in sulfur dioxide is 1: 1.
Explanation:
Law of constant proportion states that In a chemical substance the elements are always present in definite proportions by mass. This law is also known as 'Law of definite proportions '.
Mass of 1 atom of sulphur = 32 g
Mass of 1 atom of oxygen = 16 g
Mass of 2 atoms of oxygen =[tex]16g\times 2=32g[/tex]
In formation of [tex]SO_2[/tex] , 1 atom of sulfur combines with 2 atoms of oxygen and thus the mass ratio will be 32: 32= 1:1 .
Thus the ratio of mass of sulfur atom to mass of oxygen atom in sulfur dioxide is 1: 1.
How might a scientist confirm the results of other expirements by doing an experiment
What are some similarities and differences between group 1, 0 and 7 elements on the periodic table?
Answer:
Difference : group 1 elements are known as alkali metals, group 7 elements are known as transition metals
Similarities : Both group 1 and 7 elements become more reactive as u go down and up respectively
The radioisotope phosphorus-32 is used in tracers for measuring phosphorus uptake by plants. The half-life of phosphorus-32 is 14.3 days. How much time is required for the activity of a sample of phosphorus-32 to fall to 7.34 percent of its original value
Answer:
54 days
Explanation:
We have to use the formula;
0.693/t1/2 =2.303/t log Ao/A
Where;
t1/2= half-life of phosphorus-32= 14.3 days
t= time taken for the activity to fall to 7.34% of its original value
Ao=initial activity of phosphorus-32
A= activity of phosphorus-32 after a time t
Note that;
A=0.0734Ao (the activity of the sample decreased to 7.34% of the activity of the original sample)
Substituting values;
0.693/14.3 = 2.303/t log Ao/0.0734Ao
0.693/14.3 = 2.303/t log 1/0.0734
0.693/14.3 = 2.6/t
0.048=2.6/t
t= 2.6/0.048
t= 54 days
Find the area of a circle inscribed in an equilateral triangle of side 18 cm. ( Take pi= 3.14). answer should be 54.78 cm²
Answer:
The answer according to me.............
Explanation:
endothermic or exothermic?
The reaction between ammonium nitrate and water absorbs heat from the surrounding environment.
Three drops of concentrated sulfuric acid added to 100 milliliters of water in a beaker makes the beaker hot.
Ammonium chloride dissolved in a beaker of water makes the beaker cold.
Uranium atoms are split to produce nuclear energy.
Water separates into hydrogen and oxygen when an electric current is run through it.
Methane and oxygen are combined to produce methanol and heat.
Answer:
Endothermic
Exothermic
Endothermic
Exothermic
Exothermic
Exothermic
Explanation:
Endothermic is when a reaction absorbs heat.
Exothermic is when a reaction releases heat.
Endothermic reactions:
The reaction between
ammonium nitrate and
water absorbs heat
from the surrounding
environment.
Ammonium chloride dissolved
in a beaker of water makes the
beaker cold.
Water separates into
hydrogen and oxygen
when an electric current
is run through it.
Exothermic reactions:
Three drops of concentrated
sulfuric acid added to 100
milliliters of water in a beaker
makes the beaker hot.
Uranium atoms are split to
produce nuclear energy.
Methane and oxygen are
combined to produce
methanol and heat.
#platofam
Use the pictures shown to identify three ways of drawing hydrocarbon molecules.
Then write the molecular formulas. (1 point each)
Answer:
The three ways to in which the hydrocarbons are represented are;
a. The ball and stick model
b. Condensed structural formula
c. Skeletal structure
The molecular formula are
a. C₇H₁₆
b. C₆H₁₄
c. C₅H₁₂
Explanation:
a. The ball and stick model of organic compounds, displays the atoms and bonds in three dimensions, representing the atoms by spares and the bonds by rods
b. The condensed structural formula are similar to the structural formula with the difference that the formula is written in a linear fashion which conserves space and increases ease of writing and are written out faster.
c. In the skeletal structure diagram, the atoms are of the organic compound are combined together in the structural drawing of the essential features of the organic compound. In essence, a skeletal structure, depicts the skeleton of a compound as it is made up of the molecule's skeletal atoms.
The three ways in which the hydrocarbons are represented are:
a. The ball and stick model
b. Condensed structure
c. Skeletal structure
The molecular formula are
a. C₇H₁₆
b. C₆H₁₄
c. C₅H₁₂
Let us understand these models and forms one by one:
a. The ball and stick model of organic compounds, displays the atoms and bonds in three dimensions, representing the atoms by spares and the bonds by rods.
b. The condensed structural formula are similar to the structural formula with the difference that the formula is written in a linear fashion which conserves space and increases ease of writing and are written out faster.
c. In the skeletal structure diagram, the atoms are of the organic compound are combined together in the structural drawing of the essential features of the organic compound. In a skeletal structure, depicts the skeleton of a compound as it is made up of the molecule's skeletal atoms.
Learn more:
brainly.com/question/21414230
Make a list of 5 metals and 5 non metals and their real life application and any additional information about
Answer:
Metals:
Copper: to make cooking utensils such as pots because it has a high heat conductivity.
Aluminium: to make aluminium foil / soda cans because it is malleable
Mercury: fills up thermometers because it can indicate the temperature when it expands. But it is toxic so fewer people are using mercury thermometers now.
Titanium: to make the body of supersonic aircrafts because it is strong and corrosion resistant
Gold: to make jewelry because it is shiny and also corrosion resistant
Non-metals:
Nitrogen: to fill up chip packages because its molecules are unreactive
Helium: to fill up balloons because it is lightweight
Hydrogen: for generating electricity in hydrogen fuel cells. It is environmentally-friendly because it does not produce any greenhouse gas or toxic pollutants.
Fluorine: added in toothpaste for strengthening the teeth. It can also prevent cavities.
Carbon: the graphite in pencils. this is one form of carbon. Other common forms (allotropes) of carbon include diamond and Buckminsterfullerene (buckyball).
The freezing point of water in degrees Celsius is [ Select ] __________. The freezing point of water in degrees Fahrenheit is [ Select ] __________. The freezing point of water in Kelvin is [ Select ] __________. (Use whole numerals/numbers for all choices — no letters or symbols)
Answer: 0, 32 , 273
Explanation:
The freezing point of water in degree Celsius, Fahrenheit and Kelvin are in the following order; 0 , 32 , 273
help me pls :( determine the number of lone pair electrons on each H in NH3. Z of N=7, H=1
Answer:
The correct option is;
A. 0
Explanation:
The ammonia molecule has four pairs of electron whereby being located around the central nitrogen atom is tetrahedral in shape.
Of the four pairs of electrons, three are the bonds between nitrogen and hydrogen, such that there is only one lone pair of electron in the ammonia molecule that is located on the central nitrogen atom
The one electron on each hydrogen atoms and one of the electrons on the nitrogen atom form a bonding pair of electrons, that is the bonding pair of electrons are shared by the two nuclei, hydrogen and nitrogen
Since a lone pair are a pair of electrons attached to only one nucleus, the hydrogen in ammonia has no lone pair of electrons.
fill in the plank
The ----- cycle is a monthly cycle which releases a new egg into the female reproductive system
The breaking down and changing of rocks at or near Earth's surface is called _____.
Answer: Weathering
Explanation:
Weathering can break down rocks and change it shapes.
An aluminum kettle weights 1.05 kg and has a heat capacity of 0.9211 J over grams Celsius how much heat is required to increase the temperature of the scuttle from 23.0 Celsius to 90
Answer:
64799.4 J
Explanation:
The following data were obtained from the question:
Mass (M) = 1.05 kg = 1.05 x 1000 = 1050g
Specific heat capacity (C) = 0.9211 J/g°C
Initial temperature (T1) = 23°C
Final temperature (T2) = 90°C
Change in temperature (ΔT) = T2 – T1 =
90°C – 23°C = 67°C
Heat required (Q) =....?
The heat required to increase the temperature of the kettle can b obtain as follow:
Q = MCΔT
Q = 1050 x 0.9211 x 67
Q = 64799.4 J
Therefore, 64799.4 J of heat is required to increase th temperature of the kettle from 23°C to 90°C.
10g of sugar is dissolved by water to make 200g of solution of sugar. What is the percent by mass of the solution?
Explanation:
In sugar solution 200 g has sugar 10 g
In sugar solution 100 g has sugar 10/200 × 100
= 5 %w/w
classify the following into physical and chemical changes a) drying of a shirt in the sun b) rising of hot air over a radiator c)rusting of iron d)mixing of sand with sugar e) digestion f) milk turns to curd g) dissolution of salt in water
Answer:
A. physical change
b. physical change
c. chemical change
d. chemical change
PLEASE HELP!! thank you Which element does X represent?
Answer:
95 Kr36
Explanation:
The process by which a large nucleus split into two smaller nuclei is called nuclear fission and occurs after the nucleus has absorbed a neutron that is a product of the radioactive decay of another atom. The formed fission fragments are unstable and extremely radioactive.
~ WILL MARK AS BRAINLIEST ~
What is the mass of 15% of solution of lime that is formed by dissolving 30g of calcium hydroxide in water?
Answer:
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
Explanation:
Mass of solution = M
Mass percentage of the solution of lime = 15%
Mass of lime or calcium hydroxide = m = 30 g
The Formula of mass percentage is given as :
[tex]m/m\%=\frac{m}{M}\times 100[/tex]
On substituting the values in ab above formula :
[tex]15\%=\frac{30 g}{M}\times 100[/tex]
[tex]M=\frac{30 g}{15}\times 100=200 g[/tex]
200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.
hurry I'm on a timer
Which two materials form igneous rocks upon cooling?
A. lava and crystals
B. magma and lava
C.crystals and intrusive rocks
D.intrusive rocks and sediment from rocks
Answer:
B. Magma and Lava
hopefully this helped :3
Answer:
B: magma and lava
Explanation:
Why is the mole important? Group of answer choices It can be applied to any type of object: molecules, atoms, ions, etc. It gives us a convenient way to express large numbers. It is useful when converting between grams and atoms or molecules. All of the above.
Answer: the mole
Explanation:
The mole is the unit of amount in Chemistry.
It provides a bridge between the atom and the macroscopic amounts of material that we work with in the laboratory.
What is the percentage of OH- in Ca(OH)2
By weight the hydroxides are 45.9% of the weight
The mass percentage of the OH⁻ in the compound Ca(OH)₂ is 45.94 %.
What is the mass percentage?The percentage of any element or group of atoms in a given compound is the number of parts by mass of that element or group of atoms present in 100 parts by mass of the given compound.
The percentage of an element can be calculated in 2 steps:
First, calculate the molar mass of the compound by the addition of the atomic masses of the atoms. Then, the percentage of the elements by dividing the total mass of the element or or group of atoms by the molar mass of the compound multiplied by 100.
Given, the molecular formula of the given compound is Ca(OH)₂. The atomic mass of calcium, hydrogen, and oxygen is 40g, 1 g, and 16 respectively.
The molecular mass of the Ca(OH)₂ = 74 g/mol
The mass of OH in Ca(OH)₂ = 34 g
The mass percentage of the OH⁻ = (34/74) × 100 = 45.94 %
Therefore, the mass percentage of the OH in Ca(OH)₂ is equal to 45.94%.
Learn more about the mass percentage, here:
brainly.com/question/16750428
#SPJ2
Gaseous ethane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 7.82 g of ethane is mixed with 9.9 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits
Answer:
4.79 g of water
Explanation:
From the reaction equation;
C2H6(g) + 7/2O2(g) ----> 2CO2(g) + 3H2O(g)
Next we convert the given masses of reactants to moles of reactants.
For ethane; number of moles = mass/molar mass= 7.82g/ 30gmol-1= 0.261 moles
For oxygen; number of moles= 9.9 g/32gmol-1= 0.31 moles
Next we determine the limiting reactant, the limiting reactant yields the least amount of product.
For ethane;
From the reaction equation,
1 mole of ethane yields 3 moles of water
0.261 moles of Ethan yields 0.261 ×3 = 0.783 moles of water
For oxygen;
3.5 moles of oxygen yields 3 moles of water
0.31 moles of oxygen yields 0.31 × 3/3.5 = 0.266 moles of water
Hence oxygen is the limiting reactant.
Mass of water produced = 0.266 moles of water × 18gmol-1 = 4.79 g of water
Other than carbon being relatively small, what is another reason that carbon can form so many compounds? the ability to form four covalent bonds the ability to change shape the ability to form a diatomic molecule the ability to split its electrons
Answer:
Ability to form four covalent bonds.
Explanation:
Carbon is the first member of group 14. It is essentially a nonmetal. It is a small atom which regularly exhibits tetra valency. This means that carbon is able to form four covalent bonds to four chemical species which may be the same or different each time. This leaves room for many different possible combination patterns of carbon with other chemical species.
Hence carbon forms a very large number of compounds due to its small size and its ability for form four covalent bonds to other chemical species in any bonding situation.
Answer: the ability to form four covalent bonds
Explanation:
3 point different between fundamental units and derived units
Answer:
Fundamental Units:
1) Fundamental units also called base units are used to describe base quantities
2) They cannot be expressed in terms of derived units.
3) Examples : Meter, Ampere, Second etc.
Derived Units:
1) Derived units are used to describe derived quantities.
2) They can be expressed in terms of fundamental units.
3) Examples: Newton, Joule, Hertz, Pascal etc.
Answer:
3diferences
Explanation:
fundamental are independent but derived are dependent
there are 7fundamental units but there are many derived units from fundamental.
meter, second, kilogram, etc are examples of fundamental but m/s^2, newton, joule, etc are derived units
The number of joules needed to raise the temperature of 32 g of water from 12 °C to 54 °C is
The specific heat of water is 4.184 J/g °C.
Answer: 5,600 J
Explanation:
Joules = mass x specific heat x temperature change
32 x 4.184 x (54 - 12)
= 133.888 x 42
= 5,623.296
(significant figures => 5,600)
Q. Give reasons for the following: 1. Graphite has a very high melting point. 2. Graphite is a non-metal but conducts electricity. Answer the question according to the class 9th student.
Explanation:
1.Graphite has a very high melting point because its structure consists of carbon atoms which are held together by strong covalent bonds
2.It has delocalised electrons.
TIMED TEST PLS HELP (will give BRAINLIEST) According to some scientists, which is a cause of global warming? PICK ONLY ONE A) decrease of nitrous oxide B) increase in cloud cover C) decrease of methane gas D) increase in carbon dioxide
Answer:
D : increase in carbon dioxide
Answer: the Answer is D, 100% sure
increase in carbon dioxide
Explanation: i did the GED school and got it right
Lawrence experienced a major accident in class. His entire test tube rack with all his chemicals fell and broke. There were chemicals all over the floor. Which would be used to clean his mess? eye wash safety shower sponge chemical spill kit
Answer:
The correct option is;
Chemical spill kit
Explanation:
When cleaning simple chemical spills that do not spread or indirectly put people and property in danger and does not negatively impact o the environment the risk, quantity and likely impact of the spill should be evaluated then with a chemical spill kit which comprises of personal protective clothing, materials that are absorbent, waste bags, broom and dustpan and a waste container can be used absorb, contain the residues, clean the spill and put the collected waste away.
Answer:
Chemical spill kit
Explanation:
uh yeah
In the hydrogenation of oils the catalyst used is:
A. Pt
B. Ni
C. Fe
D. V2O5
Answer:
B
Explanation:
plz follow me and give brainliest
Which factor plays the biggest role in delaying the detection of childhood
diseases?
Answer:
poor access to health care providers
Explanation:
without health care providers you cant get tested.
What is the name of this alkane? Two central carbons are bonded to C H 3 at each end, H below, and C H3 above the left carbon and H above the right carbon.
Answer:
the first alternative is the answer.
Explanation:
first u choose the longest chian. that is the horizontal chain. then u count the carbon number. then u see if there are alkyls the alkyl is methyl. and it is 1. so, you first write the alkyl number (1) then the alkyl name (methyl) then you write the alkane name (butane) because it consists 5 carbons. hope it helped.
The correct answer is 1-methyl butane.
What are alkanes?
Alkanes are a series of compounds that contain carbon and hydrogen atoms with single covalent bonds. These are known as saturated hydrocarbons. This group of compounds consists of carbon and hydrogen atoms with single covalent bonds.
Does 1 methyl butane exist?While writing the IUPAC name the chain with the highest number of C atoms is considered to be the parent chain and since 1-methyl butane; methyl also forms the part of the chain so we shall use pentane (normal pentane and not 1-methyl butane) so literally, pentane and 1-methyl butane is the same molecule and not isomers.
Learn more about alkanes here https://brainly.com/question/24270289
#SPJ2
how do we solve a WEAK/STRONG acid
Answer:
Strong acids completely dissociate into their ions in water, while weak acids only partially dissociate. There are only a few (7) strong acids, so many people choose to memorize them. All the other acids are weak.
Explanation:
Weak acids. Explaining the term "weak acid" A weak acid is one which doesn't ionise fully when it is dissolved in water. Ethanoic acid is a typical weak acid. It reacts with water to produce hydroxonium ions and ethanoate ions, but the back reaction is more successful than the forward one.
A strong acid is an acid which dissociates completely in water. That is, all the acid molecules break up into ions and solvate (attach) to water molecules. Therefore, the concentration of hydronium ions in a strong acid solution is equal to the concentration of the acid.
pls mark brainiest
hope this helps