Answer:
0.6 M
Explanation:
The concentration can be expressed as molarity as follows:
Molarity = NaCl moles / liters of solutionWe are already given the number of moles (0.150 mol) so we need to calculate the liters of solution.
We convert mL to L:
250.0 mL * [tex]\frac{1L}{1000mL}[/tex] = 0.250 LNow we can calculate the molarity of the NaCl solution:
Molarity = 0.150 mol / 0.250 L = 0.6 MThe concentration of 0.150 moles of Sodium chloride in 250 mL solution is 0.6M.
How do we calculate concentration?Concentration will be calculated in terms of molarity and molarity will define as the number of moles of solute present in per litre of the solution.
Given moles of NaCl = 0.150 moles
Volume of solution = 250mL = 0.25L
Molarity of NaCl will be calculated as:
M = 0.150/0.25
M = 0.6 M
Hence required molarity is 0.6M.
To know more about molarity, visit the below link:
https://brainly.com/question/14469428
ASAP I WILL GIVE BRAINLIEST!Which arrow represents the change of state described above? The diagram shows changes of state between solid, liquid, and gas. The atoms of a substance lose energy during a change of state. After the change, the atoms are close together but are able to slide past one another.
0 L
0 N
0 O
0 P
Answer:
O
Explanation:
The atoms lose energy during a change of state, but can still slide past each other; gas to a liquid.
Answer:
i think the answer is C: O
Explanation:
correct me if im wrong
The table below gives the numbers of protons, electrons, and neutrons in
four atoms. Based on the information that is given, which atom in the table
has the highest mass?
2 points
Atom
Number of neutrons
Number of protons
39
140
2
Number of electrons
39
10
139
40
3
4
39
50
64
140
51
1
3
4
3thrd number attest you are ggsdggd
What is the frequency of this wave?
1
2
3
4
Need help please? Thanks youu
Answer:
A
B
E
Explanation:
"Fission is the splitting of a heavy, unstable nucleus into two lighter nuclei
and fusion is the process where two light nuclei combine together releasing vast amounts of energy"
a process that releases energy is respiration
2)
MgCl2 + Li,CO, → Mgco, + 2 LICI
Answer:
double replacement
Explanation:
Which terms describe a substance that has a low melting point and poor electrical conductivity?
(1) Metallic and lustrous
(2) Dull and brittle
(3) Brittle and lustrous
(4) Metallic and dull
Find the pH of the solution obtained when 0.027 L of 0.063 M benzylamine, C7H7NH2, is titrated to the equivalence point with 0.048 M hydrochloric acid. Kb for benzylamine is 4.7×10-10.
Answer:
pH = 3.12
Explanation:
C7H7NH2 + HCl ---> C7H7NH3+Cl-
moles of C7H7NH2 = 0.027 x 0.063 = 1.7 x 10^-3 mol
moles of C7H7NH2 = moles of HCl at equivalence point
1.7 x 10^-3 = 0.048 x V
V = 0.035 L
volume of HCl = 0.035 L
so C7H7NH3+Cl- salt formed = 1.7 x 10^-3 moles
salt concentration = moles / total volume
= 1.7 x 10^-3 / (0.027 + 0.035) = 0.027M
this salt formed from weak base strong acid . so pH <7
pH = 7 - 1/2 [pKb + logC]
pH = 7 -1/2 [9.33 + logC]
pH = 3.12
DO IT PLS
6. A helium laser emits light with a wavelength of 363 nm. What is the frequency of the light?
Help! I dont know how to do this lol
the order is :
- Aufbau principle
- Hund's Rule
- Pauli's Exclusion Principle
Match each vocabulary word with the correct definition.
1. protein produced by the body to combat foreign materials
2. substance that stimulates the production of an antibody
3. white blood cell
4. cells eating other cells or substances
5. excessive loss of water
antigen
antibody
phagocytosis
leukocyte
dehydration
Answer:
1. antibody
2. antigen
3. leukocyte
4. phagocytosis
5. dehydration
Explanation:
Please help me please!!
(Picture above)
Answer:
I'll tell you how to find it, but no answers
Explanation:
It's pretty simple. Your north and south points go first, then your east and west. You look at the dot, and trace your finger down the two lines to get your lattitude and longitude. From there, you just write it out. For example, G would be at (0,0) because the lines match up at 0,0 where the point is.
The reaction between calcium carbonate (CaCO3) and HCl produces calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).What happens when the concentration of hydrogen chloride (HCl) molecules is doubled in this reaction?
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
Answer:
yes that is right
Explanation:
Answer: what is the answer im on plato
Explanation:
whats the name for K2SO4??
During the second stage of aerobic cellular respiration, which molecule combines with the products of the first stage?
water
energy
oxygen
glucose
Answer:
Water
Explanation:
which of the following is the best insulator
A.aluminum
B.cooper
C.gold
B.wood
I don't know if I spelled A the correct
Answer:
Explanation:
its wood
which two changes of state can be caused by removing thermal energy from a substace A. deposition B. condencation C. vaporization D.sublimation
Answer:
maybe is b but wait to other people answer
Answer:A. deposition B. condencation
Explanation:
In a laboratory experiment, students synthesized a new compound and found that when 11.01 grams of the compound were dissolved to make 158.1 mL of a ethanol solution, the osmotic pressure generated was 1.91 atm at 298 K. The compound was also found to be nonvolatile and a non-electrolyte. What is the molecular weight they determined for this compound?
Answer:
892 g/mol
Explanation:
Step 1: Given and required data
Mass of the nonvolatile and a non-electrolyte solute: 11.01 gVolume of solution: 158.1 mL = 0.1581 LOsmotic pressure (π): 1.91 atmIdeal gas constant (R): 0.0821 atm.L/mol.KAbsolute temperature (T): 298 KStep 2: Calculate the molarity (M) of the solution
The osmotic pressure is a colligative property that can be calculated using the following expression.
π = M × R × T
M = π / R × T
M = 1.91 atm / (0.0821 atm.L/mol.K) × 298 K
M = 0.0781 M
Step 3: Calculate the molecular weight of the solute
We will use the following expression for molarity.
M = mass of solute / molecular weight of solute × liters of solution
molecular weight of solute = mass of solute / M × liters of solution
molecular weight of solute = 11.01 g / (0.0781 mol/L) × 0.1581 L
molecular weight of solute = 892 g/mol
Why are a molecule's atoms as far away from each other as they can get?
A) Electronegativity differences force the atoms apart
B) The protons in the nuclei push the atoms apart
C) Forces between electron pairs push the atoms apart
D) Induced dipoles push the atoms away from each other
Answer:
the answer is a
Explanation:
an electron contains a negative charge and like charges repel each other. Hence, in a atom the force of repulsion between the atoms away from each other. As a result a molecules atoms are as far away from each others as they can get .
A molecule's atoms as far away from each other as they can get because "Forces between electron pairs push the atoms apart".
So, option C is correct one.
Why electrons repel each other?Since, an electron is negative charge species revolve around the nucleus of an atom. So, when two atoms come close to each other in molecules there is repulsion occurs between negative charge electron .
To learn more about electrons here.
https://brainly.com/question/18367541
#SPJ3
The burning of fossil fuels contributes to the addition of greenhouse gasses to the atmosphere. These gases trap thermal (heat) energy in the earth’s atmosphere. Which of the following would be the most reasonable changes that could result from an increase in the burning of fossil fuels? PLEASE HURRY I HAVE 20 MINUTES
Answer:
nitrogen
Explanation:
What is the structural formula of CF2Br2
Answer:
Dibromodifluoromethane
Explanation:
Who were the two groups of Suffragists, and how were their tactics to gain a woman’s right to vote different?
Answer:The national woman suffrage association and American woman suffrage association.
Explanation: The party eventually realized that it needed to escalate its pressure in more aggressive tactics, like picketing the White House over many months, leading to the arrest and imprisonment of many suffragists. Using a variety of tactics, the party successfully pressured the president, members of congress, and state legislators to support of the 19th amendment to the U.S constitution guaranteeing woman nationwide the right to vote.
which of the following is an isotope of hydrogen
HELP ASAPPPP BRAINLIEST
Answer:
2nd option
Explanation:
Someone took the last cookie from the cookie jar last night. The last person to leave the scene is the culprit. Who was it? Highlight the guilty culprit based on the clues provided.
You take a balloon with fixed volume and submerge it in a hot tub for a few minutes. What would you expect to happen to the pressure of the balloon after you take it out? Explain.
Answer:
pressure will be high because the temp is high, the gas is gonna expand
Explanation:
when temp increases it causes gas to expand which causes high pressure. this is because pv=nrt, p=pressure in atmosphere, v is volume in liters, n is number of particles in moles, t is temp in kelvin is r is ideal gas constant
The impact on the pressure should be high since the temperature should be high due to which the gas should be expanded.
What is pressure?Pressure refer to the force applied that should be perpendicular to the surface of an object per unit area so that the force is distributed. In the case when the temperature should be increased so here gas should be expanded that resulted into the high temperature.
Here the following formula should be applied
pv = nrt
Here p = pressure
v means the volume
n means no of particles in moles
r means the ideal gas constant
learn more about pressure here: https://brainly.com/question/4417455
Carbon has 6 dots around the symbol in the correct lewis structure
True
False
Answer:
It has 4
Explanation:
the carbon Lewis dot struc has 4 around it it looks like this
. .
C
. .
what is protein denaturation
Answer:
Denaturation is a process in which proteins or nucleic acids lose the quaternary structure, tertiary structure, and secondary structure which is present in their native state, by application of some
Explanation:
What is the average Mw for a fatty acid mixture whose fats (1 gram) required 0.0034 equivalents of NaOH to titrate. Remember: 1 Fatty acid has 1 equivalent.
1. Ew = Mw (#H+)
2. Ew = mass/eq
a.) 294.12 g/mol
b.) 145.04 g/mol
c.) 345.56 g/mol
d.) 132.04 g/mol
Answer:
a.) 294.12 g/mol
Explanation:
1 equivalent of fatty acid reacts with 1 equivalent of NaOH.
As in the titration are required 0.0034 equivalents of NaOH, the equivalents of fatty acids = moles of fatty acids are:
0.0034 moles of fatty acids
Molar mass is defined as the ratio between mass of substance in a determined amount of moles. The mass of the fats was 1 gram, that means the molar mass is:
1g / 0.0034moles =
294.12g/mol
Right option is:
a.) 294.12 g/molWhich graph shows the pressure-volume relationship expected for an ideal gas? (This is an illustration of Boyle's law.)
Question 11 options:
A)
Graph B
B)
Graph C
C)
Graph D
D)
Graph A
Answer:
D
Explanation:
The graph of Boyle's law is known as pressure-volume graph or PV curve. It is as follows:
As observed from the graph above, pressure increases with a decrease in volume, and vice versa. Thus, pressure is inversely proportional to volume. Other parameters (temperature and amount of gas) are constant in the graph above.
Volume is on the x-axis and pressure, on the y-axis. The equation of the curve is PV = k, which is the equation of Boyle's law. The curve is hyperbolic in nature having two asymptotes: P = 0 (horizontal) and V = 0 (vertical).
As volume tends to positive infinity, pressure tends to zero, and we get the horizontal asymptote, P = 0.
Horizontal asymptote, P=0
When volume approaches zero, pressure approaches infinity, and it results in the vertical asymptote, V = 0.
The graph which shows the pressure-volume relationship expected for an ideal gas is: C) Graph D.
Boyle's states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyle's law is given by the formula:
[tex]PV = k[/tex]
Where;
P is the pressure of an ideal gas.V is the volume of an ideal gas.For the illustration of Boyle's law using a graph, volume is represented on the x-axis while pressure is represented on the y-axis.
Generally, the graph of Boyle's law is a hyperbolic curve with two asymptotes:
P = 0 (horizontal axis).V = 0 (vertical axis).Find more information: https://brainly.com/question/1437490
What happens after condensation to cause precipitation?
A
The sun heats water on the Earth's surface.
B
Water is absorbed into the ground.
C
Clouds fill with moisture and get too heavy.
D
Excess water runs downhill.
Answer:
The answer is c, Clouds fill with moisture and get too hravy