Answer:
sodium
Explanation:
it is an alkali metal
Please help me what is the answer
There are 20.8 moles of propanol
Further explanationThe mole is the number of particles(molecules, atoms, ions) contained in a substance
1 mol = 6.02.10²³ particles
Can be formulated
N=n x No
N = number of particles
n = mol
No = Avogadro's = 6.02.10²³
1.2 x 10⁵ molecules of propanol
[tex]\tt \dfrac{1.25\times 10^{25}}{6.02\times 10^{23}}=20.8~moles[/tex]
Butane and methyl propane are an example of a pair of
A geologist was looking at a new
mineral they found. The mineral
sample was gray, non-metallic, had
density of 3.8 g/mL, and a volume
of 48.3 mL
Of the observed properties listed
below, which is considered to be an
extensive property?
A Gray
B Metallic
C Density
D Volume
Answer:
D. Volume
Explanation:
Properties mentioned in the question;
colour = gray
Nonmetallic
Density = 3.8 g/mL
Volume = 48.3 mL
Of the mentioned, which is extensive ?
Extensive properties are those properties that are proportional to the amount of substance present.
The correct option is D. Volume. The other properties do not change with increasing or decreasing amount of the mineral
Use the model to answer the question.
Which element symbol actually represents the model?
Plz answer
Answer:
B
Explanation:
Boron has 5 protons.
Which of the following subatomic particles are found surrounding the nucleus and have a negative charge?
F negatrons
G neutrons
H protons
J electrons
Answer:
J electrons
Explanation:
Electrons are the negatively charged subatomic particles that surrounds the nucleus of an atom.
Electrons occupy the bulk volume of an atom. These particle was discovered by J.J ThomsonThey found orbiting the extra-nuclear space of every atom. The nucleus is made up of protons and neutrons.paragraph on water cycle
Answer:
The water cycle or hydrologic is a continuous cycle where water evaporates, travels into the air and becomes part of a cloud, falls down to earth as precipitation, and then evaporates again. ... These areas are usually close to oceans or large bodies of water that allow more water to evaporate and form clouds.
Explanation:
Hydrogen bond is not formed by 1) oxygen 2) nitrogen 3) chlorine
PLEASE HELP!!!
Answer:
Input work is the work done on a machine as the input force acts through the input distance. This is in contrast to output work which is a force that is applied by the body or system to something else. Output work is the work done by a machine as the output force acts through the output distance.Jan 15, 2020 bahsgsh bvshgs d hg
1. Why is soil erosion relatively less in dense forests as compared to barren, open fields?
Because the deep roots of big trees hold the soil and don't let it slip away simply by rain or wind.
Answer:
the roots of the trees keep the soil in place opposed to a barren landscape that has little to no plants to keep the soil in place
hope this helps (╹ڡ╹ )
A beaker filled with 100 ml of water has an initial temperature of 23 degrees Celsius. After the beaker has been heated, the final temperature is 100 degrees celsius. The final volume of the water is 85.32 ml. After reaching the final temperature, there are bubbles throughout the water. What is this an example of?
Answer: The temperature of a beaker of water is 318.2 K.
Explanation:
Multiplying the temperature in Celsius by tells us how many Fahrenheit degrees above the freezing .
Please help brainiest is award!
What color are the stars on the diagram with the lowest surface temperatures?
Answer:
red supergiants is the answer
Which of the following does not apply to water molecules?
Water molecules are polar
Water has cohesive properties
Water is less dense as a solid than a liquid
Water is not a very good solvent
Answer:
It is the last one.
Explanation:
Water molecules are polar, they have cohesive properties, and water is less dense when it is solid than when it is a liquid, that is why ice floats in liquid water. However, water is a very good solvent, it can dissolve many solids, including sugar, salt, and other hydrophilic substances.
How many grams are equal to 0.11 mole of copper(I) chromate?
Mass of Copper(I) chromate( CuCrO₄) = 19.75 g
Further explanationThe mole is the number of particles contained in a substance
1 mol = 6.02.10²³
Moles can also be determined from the amount of substance mass and its molar mass
[tex]\tt \large{\boxed{\bold{mol=\dfrac{m(mass)}{MW(molecular~weight)}}}[/tex]
0.11 mole of Copper(I) chromate( CuCrO₄) ⇒ MW=179.54 g/mol, so mass :
[tex]\tt mass=mol\times MW\\\\mass=0.11\times 179.54\\\\mass=19.75~g[/tex]
1. What part of the human body has the same role as the power source in a computer?
2.What part of the human body has the same role as the keyboard or the mouse on a computer?
Answer:
The heart
Hand
Explanation:
The part of the human body that has the same role as the power source in a computer is the heart. A power source in a computer provides energy that powers the whole system.
The human heart provides the pumping action for the circulatory system. Just like current passes through wires in a computer by energy from the power source, the human heart pumps blood throughout the body in a like manner. Without the pumping action of the heart, the human body is dead.Also, keyboard and mouse are input devices. They are used to give instruction and perform certain tasks on the computer system.
The human body can also carryout tasks by using the hand. Objects are moved from one place to another just as you drag an icon using the mouse. We type word processors using information from the keyboard, also, we are able write using pen on paper.Which of the following best describes a hypothesis?
A. An explanation that is supported by scientific data
B. A proven explanation for experimental results
c. A possible answer to a scientific question
D. A question about the natural world
please help i will give brainliest
Help please If there are 10 moles of HCl gas occupying 15L at 350°C, what is the pressure? Be sure to show the setup and
the final answer and unit.
Show Your Work
Answer:
P = 34.1 L
Explanation:
Given data:
Number of moles = 10 mol
Volume occupy = 15 L
Temperature = 350°C
Pressure of gas = ?
Solution:
The given problem will be solve by using general gas equation,
PV = nRT
P= Pressure
V = volume
n = number of moles
R = general gas constant = 0.0821 atm.L/ mol.K
T = temperature in kelvin
Now we will convert the temperature.
350+273 = 623 K
by putting values,
P×15 L = 10 mol ×0.0821 atm.L/ mol.K ×623 K
P = 511.48atm.L/15L
P = 34.1 L
If 150 G of war started burning 300 G of where as was left behind how many grams of CO2 gas is released
Answer:
geruow0irghvn3p0unhie0ghik
Explanation:
Momentum is mass times
A. acceleration
B. velocity
C. distance
B. velocity
This is the answer
I WILL GIVE BRANLIEST HELP HELP HELP THE SUBJECT IS ACTUALLY SCIENCE What factor is a mushroom in an ecosystem? Abiotic or Biotic?
Answer: The answer is biotic
Explanation:Mushrooms are biotic because they are living things. Abiotic means non living, so these are factors in the environment that influence a living thing's life and chance of survival
Answer: jdusjzj bacteria germs
Explanation:
Please Help!!!
Which of the following is not a good indication that a chemical change has occurred?
A. The formation of gases
B. A change in color
C. A scratched surface
D. The release heat or light
Answer:
C.
Explanation:
What will happen to the flow of blood in blood vessels (pulse) if heart beat rate increase
Answer:
"Low levels of the hormone epinephrine, also called adrenaline, cause blood vessels to relax and widen. High levels of this same hormone, along with the hormone norepinephrine, cause the blood vessels to narrow and the heart rate to rise, increasing blood pressure."
Explanation:
Why is NCl3 not soluble in water?
Answer:
Explanation:
NCl3 does not dissolve in water because it is a nonpolar molecule which is different with water. NCl3 is nonpolar due to the difference in electronegativities between 3 atoms of Cl and 1 atom if N2.
Answer:
A polar solute dissolves into a polar solvent and a non-polar compound dissolves into a non-polar solvent, this rule is known as "like dissolves like".
How much heat is required to raise the temperature of a 6.21 g sample of iron from 25.0 oC to 79.8 oC?
Answer:
151.1J
Explanation:
Given parameters:
Mass of iron = 6.21g
Initial temperature of iron = 25°C
Final temperature of iron = 79.8°C
Unknown:
Amount of heat = ?
Solution:
The amount of heat require to cause this temperature can be determined using the expression below;
H = m c (T₂ - T₁)
H is the amount of heat
m is the mass
c is the specific heat capacity
T is the temperature
Specific heat capacity of iron 0.444J/g°C
Insert the parameters and solve;
H = 6.21 x 0.444 x (79.8 - 25)
H = 151.1J
How many electrons are located in the outermost energy level in the Bohr model of a boron atom? hint it not 4
4
3
2
1
HELP ME PLEASE ! I NEED HELP !
Which statement best completes the diagram?
Mexican culture
Most people live in
urban areas.
The most widely
spoken language is
Spanish
?
A. The most important literature is nonfiction
B. The most popular foods are vegetarian,
C. The most common religion is Catholicism.
D. Most people work as farmers.
Answer:
The answer is (c)
Explanation:
Answer:
C. The most common religion is Catholism.
Explanation:
I'm taking the quiz rn.
After pollen grows on a tube down the style,___
Answer:
as soon as the pollen reaches the stigma after the pollen grain descends down the style when the pollen tube grows into the ovule when the seed germinates
Explanation:
Please help me how do i solve this
Answer:120
Explanation:2gfdxxfgngfnf
Directions: Read through each scenario and identify the independent variable, dependent variable, and the control.
Question 1
1 pts
Rob is in charge of waxing the floor at the local mall. He wants to test a new brand of floor wax called
Squeaky Clean. Rob waxes 20 floor tiles with Squeaky Clean and 20 tiles with the original wax brand.
After one week he counts the number of scratches on the floor. What is the independent variable?
number of floor scratches
brand of floor wax
20 tiles with original brand wax
Answer:
The correct answer is - brand of floor wax.
Explanation:
The independent variable is the variable or the factor in an investigation which is manipulated or change in the experiment and affects the dependent variable and produces a various result.
In this investigation, there are different brands of the floor was are the independent variable as they are changed to see the effect on the scratches on the floor on 20 tiles for each brand.
how many sig figs are in 0.0093
Answer:
there are two significant figures
Explanation:
Answer:
there are two
Explanation:
because the zeros dont count
How to do this question plz answer me
Answer:
dissolved
Explanation:
The figure shows sodium chloride is in solution. It gets that way by being dissolved.