FIRST CORRECT ANSWER GETS 10 POINTS!!!!
Which explains how the nervous system is typically involved in keeping the body in homeostasis?
It processes the environment and sends out signals.
It controls movement and provides structure.
It physically breaks down and absorbs food.
It puts oxygen in the blood, which is essential for life.
Answer:
Explanation:
It processes the environment and sends out signals.
In an experiment, the molar mass of the compound was determined to
be 228.276 g/mol. What is the molecular formula of the compound? Please help!
answer with explanation and you’ll get brain list
Answer:
Option D.
Explanation:
6H₂ + P₄ → 4PH₃First we convert the given reactant masses into moles, using their respective molar masses:
4.00 g H₂ ÷ 2 g/mol = 2 mol H₂6.20 g P₄ ÷ 124 g/mol = 0.05 mol P₄0.05 moles of P₄ would react completely with (6*0.05) 0.3 moles of H₂. There are more H₂ moles than required, meaning H₂ is in excess and P₄ is the limiting reactant.
Now we calculate how many PH₃ moles could be formed, using the number of moles of the limiting reactant:
0.05 mol P₄ * [tex]\frac{4molPH_3}{1molP_4}[/tex] = 0.2 mol PH₃Finally we convert 0.2 mol PH₃ into grams, using its molar mass:
0.2 mol PH₃ * 34 g/mol = 6.8 gSo the correct answer is option D.
A(n) ____________ is a push or a pull.
newton
acceleration
force
momentum
2.0 mole of water at STP would occupy what volume?
a) 22.4
b) 22.7
c) 44.8
d) 45.4
plzzz help me
Which shape is being shown by the model?
HELP ANYONE THERE
At a research lab, a scientist carelessly pours cultures of living microbes down the drain. Which type of pollution is this?
Question 4 options:
toxic
sediment
nutrient
bacterial
A scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
What is bacterial pollution?Bacterial pollution refers to the uncontrolled proliferation of bacteria in the surrounding environment and ecosystems.
Bacterial pollution can be a subject of concern because bacteria may be pathogenic microorganisms.Bacterial pollution may cause serious harm to the public health and the well-being of a population.In conclusion, a scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
Learn more in:
https://brainly.com/question/24704410
Knowing that Boyle's Law is P1V1 = P2V2, How would we rearrange the formula if we needed to solve for P1?
A. P1 = V1 -P2
B. P1 = P2V2 - V1
C. P1 = P2V2/V1
D. P1= V1/V2
Answer:
your answer is C
Explanation:
because when u make P1 the subject formula then P2 V2 will be divided with V1
Newton's second law states that force is equal to
mass times weight
mass times acceleration
weight divided by mass
weight times acceleration
Calculate the formula weight or molecular for the following:
a. LiCI
b. SO2 (The 2 is in subscript)
Answer:
42.39, 64.06
Explanation:
Formula Weight can be calculated by adding the atomic mass of the elements in the formula.
LiCl
AM for Li is 6.94 amu, AM for Cl is 35.45 amu
[tex](6.94)+(35.45)=42.39[/tex]
SO₂
AM for S is 32.06 amu, AM for O is 16 amu
[tex](32.06)+2(16.00)=64.06[/tex]
How many moles of gold atoms do 3.45x10^24 gold atoms constitute?
Answer:
3.45E24
Explanation:
calculator I'm not that great at math but I'm good at science but that isn't really science but it's aix between it tho
1. Which kingdom is made up of only autotrophs?
A. Protista
I
B. Animalia
C. Plantae
D. Phylum
Answer: I believe it's C
Hope this helped<3
Can you please make my answer brainly
Question #37.P.2A.2
Which statement about the periodic table is true?
a. Elements in the same column share similar properties.
b. Elements in the same row share similar properties.
c. Elements on the left have a larger nucleus than elements on the right.
d. Elements at the top of each column have the highest atomic mass in that column.
Which of the following is the correct definition of "weathering"? *
The movement of rocks
The breakdown of rocks.
The dropping off of rocks
All of the above
50 points
In the image below, light is displayed as particles called photons. Research to find out what photons are and then explain in your own words why they can be useful for modeling light.
Answer:
A photons is a particle representing a quantum of light or other electromagnetic radiation. A photon carries energy proportional to the radiation frequency but has zero rest mass.
Explanation:
Light consists of packets of energy (photons) that can only interact with the atoms and molecules of matter by being absorbed or emitted in discrete units. ... Photons carry momentum and energy like particles, but they also have a frequency and a wavelength like a sinusoidal wave. Thanks to photons we know that all quantum particles have both the properties of waves and particles. I hope it helps✌️
_BaS + _PtF2 → _BaF2 + _Pts
[tex]\huge\underline\mathbb\pink{ANSWER\::}\\\\[/tex]
_BaS + _PtF2 → _BaF2 + _Pts
Barium Sulfide + Platinum(II) Fluoride = Barium Fluoride + Platinum(II) Sulfide.
=> 1 BaS + 1 PtF2 → 1 BaF2 + 1 PtS
[tex]\\\\\\[/tex]
HOPE IT HELPS
PLEASE MARK ME BRAINLIEST☺️
A student said, "You can't see the full Moon during the day because it rises close to sunset."
Which diagram supports this statement? (Diagrams are not to scale. You are looking down from
a north polar view fisa person standing on Earth at sunset.)
Oq. Ooo
Ooo
OD
ОА
OB
ОС
OD
Answer:
I think it would be B.
Explanation:
i really kinda need some hell right now :)
If you were sitting near a gram of protactinium-234 and a gram of uranium-234, both solid materials, which would you consider more dangerous to you?
aswer: protactinium-234 is more dang erous than uranium
There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore protactinium-234 is more dangerous than uranium-234.
What is nuclear decay?Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle. Protactinium-234 and uranium-234 are radioactive element.
If we were sitting near a gram of protactinium-234 and a gram of uranium-234, both solid materials then protactinium-234 is more dangerous than uranium-234. The half-life of protactinium-234 is smaller than that of uranium-234. So, protactinium-234 is more active than uranium-234 and hence more harmful than uranium-234.
Therefore, protactinium-234 is more dangerous than uranium-234.
To know more about nuclear decay, here:
https://brainly.com/question/21114779
#SPJ2
Softening of water is the application of
Answer:
Water softening is the process of removing the dissolved calcium and magnesium salts that cause hardness in water
Explanation:
8. A liquid boils when the vapor pressure of the liquid equals the atmospheric pressure on the surface
of the liquid. Using Reference Table H, determine the boiling point of water when the atmospheric
pressure is 90. kPa
Answer:
It is 98 degrees C.
Explanation:
K2S(s) + MgI2 (aq) -----> ?
Answer:
MgS + KI = K2S + MgI2
Which of the following is the Brønsted-Lowry definition of an acid?
Answer:
A Brønsted-Lowry acid is any species that can donate a proton (H +) to another molecule. A Brønsted-Lowry base is any species that can accept a proton from another molecule. In short, a Brønsted-Lowry acid is a proton donor (PD), while a Brønsted-Lowry base is a proton acceptor (PA).
what are causes of students to drop-out from university
Answer:
stress
Explanation:
people cn get stressed and not want to do work
Describe the stages of water cycle
The molecule with only single covalent bonds is _. (C) *
CO2
СО
CI2
ON2
Answer:
CO (carbon monoxide)
Explanation:
Match the procedural step to its purpose by dragging each step in the written procedure for the Fischer esterification of benzoic acid with methanol in the presence of mineral acid into the appropriate box. Purpose: Flat-bottomed flasks transfer heat in an uneven fashion, and may fracture if heated strongly. Procedure: Purpose: Methanol, which is used as a reagent and solvent, is flammable. Prodedue: Purpose: The unreacted carboxylic acid was neutralized under mild conditions. Procede: Purpose: Water needs to be removed before the liquid ester product is collected. Procedure:
Answer:
Explanation:
The task in this question is to match the right procedure to its purpose. It explains the procedure for the preparation of Fischer Esterification. Fischer Esterification Mechanism should incorporate the ceaseless expulsion of water from the framework or the use of a huge amount of excess alcohol since the general reaction is reversible. Fischer Esterification act as an organic reaction that is utilized to change over carboxylic acids within the sight of excess alcohol and a solid corrosive catalyst (acid) to give an ester as the eventual outcome.
Procedure Purpose
[tex]\text{Flat bottomed flask transfer}\\ \\ \text{ heat in an uneven fashion and } \\ \\ \text{ may fracture if heated strongly}[/tex] [tex]\text{The reagents were added to a} \\ \\ \text{round bottom flask prior to the }\\ \\ \text{reaction being heated under reflux}[/tex]
[tex]\text{Methanol which used as a reagent} \\ \\ \text{and solvent is flammable}[/tex] [tex]\text{The solution of benzoic acid and }\\ \\ \text{methanol was heated on steam bath}[/tex]
[tex]\text{The unreacted carboxylic acid was} \\ \\ \text{neutralized under mild conditions}[/tex] [tex]\text{The reaction mixture was washed} \\ \\ \text{ with sodium bicarbonate solution}[/tex]
[tex]\text{Water needs to be removed before the} \\ \\ \text{ liquid ester product was collected}[/tex] [tex]\text{Magnesium sulphate is added to the} \\ \\ \text{ dichloromethane layer before} \\ \\ \text{ the solvent is distilled off}[/tex]
what energy is stored
Answer: potential energy is stored
Explanation:
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m2 at 500C. Assume a diffusion coefficient of 1.0 108 m2 /s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained
This question is incomplete, the complete question is;
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500C.
Assume a diffusion coefficient of 1.0 × 10⁻⁸ m²/s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained
Answer:
the number of kilograms of hydrogen that pass per hour through is 2.592 × 10⁻³ kg
Explanation:
Given the data in the question;
thickness of sheet t = 5 mm
Area A = 0.20 m²
Temperature T = 500°C
diffusion coefficient ∝ = 1.0 × 10⁻⁸ m²/s
concentration high pressure side C[tex]_A[/tex] = 2.4
concentration low pressure side C[tex]_B[/tex] = 0.6 kg
from the question, we calculate the concentration gradient
dc/dx = (C[tex]_A[/tex] - C[tex]_B[/tex])/dt
so we substitute
dc/dx = (2.4 - 0.6) / ( - 5 × 10⁻³ )
dc/dx = -360
now, mass of hydrogen per hour that diffuse through a pd sheet
M = -∝AT(dc/dx)
where time t is 1 hour ( 3600 sec )
we substitute
M = -(1.0 × 10⁻⁸) × 0.20 × 3600 (-360)
M = 0.002592
M = 2.592 × 10⁻³ kg per one hour
Therefore, the number of kilograms of hydrogen that pass per hour through is 2.592 × 10⁻³ kg
The number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500°C is 2.592 × 10⁻³ kg.
Purification: It refers to the process of removing impurities or contaminants from a substance in order to make it cleaner, purer, or more refined. It also involves the elimination or reduction of unwanted substances or components that may be present in the original material.
According to the question, given data is:
Thickness of sheet t = 5 mm
Area A = 0.20 m²
Temperature T = 500°C
Diffusion coefficient ∝ = 1.0 × 10⁻⁸ m²/s
Concentration high pressure side [tex]C_A[/tex] = 2.4
Concentration low pressure side[tex]C_B[/tex]= 0.6 kg
from the question, we calculate the concentration gradient,
[tex]dc/dx = (C _A- C_B)/dt[/tex]
so, we substitute the values,
[tex]dc/dx[/tex] = (2.4 - 0.6)/ ( - 5 × 10⁻³)
[tex]dc/dx = -360[/tex]
Now, mass of hydrogen per hour that diffuse through a Palladium sheet,
M = -∝[tex]AT(dc/dx)[/tex]
where time t is 1 hour (3600 sec)
We substitute,
M = -(1.0 × 10⁻⁸) × 0.20 × 3600 (-360)
M = 0.002592
M = 2.592 × 10⁻³ kg per hour.
Therefore, the number of kilograms of hydrogen that pass per hour through a palladium sheet is approximately 2.592 × 10⁻³ kg.
Learn more about purification here:
https://brainly.com/question/31662552
#SPJ6
This question is incomplete, the complete question is;
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500C.
Assume a diffusion coefficient of 1.0 × 10⁻⁸ m²/s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained.
Which contributes to the polarity of a water molecule?
Oa linear shape along with strong covalent bonds
O deflection of hydrogen atoms by lone pairs of electrons
O no difference in the electronegativity of oxygen and hydrogen
Ohydrogen bond formation between water molecules
Answer:
B
Explanation:
Answer:
B
Explanation:
Edge 2022