hydrocarbon gas is 81.7% c and the rest hydrogen by mass. at a temperature of 25°c and a pressure of 1atm, 1.28 g of this gas occupies 0.714 l. what is the molecular formula?

to determine the mass number of the daughter product after alpha decay has taken place Subtraction of 4 from the parent element yields the mass of the daughter product. Subtraction of 2 from the parent atom yields the atomic number of the daughter product.

Assume X is a parent element with atomic number Z and mass number A; if X decays, we obtain a daughter element Y with atomic number Z1 and mass number A1, as well as an alpha particle with atomic mass 2 and mass number 4. An alpha particle is a doubly ionised Helium atom with atomic number 2 and mass number 4.

Alpha degeneration

X4 → YA¹ + He.

The mass numbers and atomic numbers of a reaction must be balanced on either side of the equation.

→ A=A1+4

Z = Z1+2

As a result, A1 = A-4 and Z1 = Z-2.

As a result, subtracting 4 from the parent element yields the mass of the daughter product.

Learn more about atomic number here:

https://brainly.com/question/8834373

#SPJ4

The coefficient of  in the balanced equation is 8 and coefficient of fe3+  is 5.

What is balance reaction?

balance reaction is a equation where the numbers of atom of each type in the reaction is the same on both reactance and product sides.

To balance a redox reaction in the acidic medium, the number of atoms of all the elements involved in the reaction must be equal for substrates and product.

The reaction given as-

Fe2+MnO4+------>Fe3+ +Mn3+

The change in the oxidation number of the elements on reaction is seen.

Fe changes its oxidation state from +2  +3, change is +1

The oxidation state of Mn changes from +7  +2, change is -5

There is required 5 atoms of Fe for 1 atom of Mn.

With this, the equation can be written as:

The reaction is further balanced with H and O, with formation of .

The coefficient in front of  is 8 and that of  is 5.

To know more about balance reaction click-

https://brainly.com/question/29573612

#SPJ4

Moler Heat of solution is 32.7 kJ/mol

The molar heat of a solution(ΔH) is calculated by the formula

               ΔH=q/n

Where, n-Number of moles

q- Energy of the system

q is calculated by the formula

              q=m×c×ΔT

Where ΔT=(T_f-T_i)

T_f=40.3°C, T_i=17°C

ΔT=(40.3-17)°C=23.3°C

c=4.18 J/g°C

The mass of water is

m=40 ml×(1 g/1 ml)=40 g

Substitute all values in the formula

q=40g×(4.18 J/g°C)×23.3°C

q=3895.76 J

The molar mass of LiCl is 42g/mol.  

The moles of LiCl  =5g×(1 mol/42 g)=0.11905 mol

Hence, the molar heat of a solution is

ΔH=3895.76 J/0.11905 mol =32723.7295 J/mol

Convert the value in kJ

ΔH=32723.7295 J/mol×(1 kJ/1000 J)=32.7 kJ/mol

Therefore, the molar heat of a solution is 32.7 kJ/mol.

To learn more about Moler Heat:

brainly.com/question/29658772

#SPJ4

52.18mL of KOH should be added to 100 mL of solution containing 10.0 g of histidine hydrochloride to get a pH of 9.30.

What is pH?

pH is a measurement of the acidity or basicity of aqueous or other liquid solutions in terms of digits. The phrase, which is frequently used in chemistry, biology, and agronomy, converts hydrogen ion concentrations, which typically vary between 1 and 1014 gram-equivalents per liter, into numbers between 0 and 14.

Given:

pH = 9.30

pH = -log [[tex]H^{+}[/tex]]

9.30 = -log [[tex]H^{+}[/tex]]

antilog (-9.30) = [[tex]H^{+}[/tex]]

[[tex]H^{+}[/tex]] = 5.01 × [tex]10^{-10}[/tex] M

Strong acid (His HCl) + strong base (KOH)

[[tex]H^{+}[/tex]] = [tex]\frac{-M_{B}V_{B}n_{fB} + M_{A}V_{A}n_{fA}}{V_{final}}[/tex]

[tex]M_{B}[/tex] and [tex]M_{A}[/tex]= Molarity

[tex]V_{A}[/tex] and [tex]V_{B}[/tex] = Volume

[tex]n_{fA}[/tex] = n factor for acid

[tex]n_{fB}[/tex] = n factor for KOH

5.01 × [tex]10^{-10}[/tex] M = [tex]\frac{-1 M X V_{B} X 1 + 0.52 X 100 X 1 }{V_{A} + V_{B} }[/tex]

                       = [tex]\frac{-V_{B} + 52.18 }{100 + V_{B} }[/tex]

[tex]n_{fB}[/tex] = [tex]n_{fn}[/tex] = 1

5.01 × [tex]10^{-10}[/tex] M (100 + [tex]V_{B}[/tex] )= [tex]V_{B} - 52.18[/tex]

5.01 × [tex]10^{-10}[/tex] + 5.01 × [tex]10^{-10}[/tex] [tex]V_{B}[/tex] = -[tex]V_{B}[/tex] + 52.18

2.18 - 5.01 × [tex]10^{-8}[/tex] = 5.01 × [tex]10^{-10}[/tex] [tex]V_{B}[/tex] + [tex]V_{B}[/tex]

[tex]V_{B}[/tex] = 52.17999 mL ≅ 52.18mL of KOH.

To know more about pH, check out

https://brainly.com/question/172153

#SPJ4

They are equations that represent chemical reactions using chemical formulae and symbols. In a chemical equation, the reactants are represented on the left, and the products are shown on the right.

Chemical equations are used to represent chemical reactions using symbols and substance formulae. A and B are referred to in this equation as the reactants, and C and D are referred to as the products. The chemical reaction's direction is indicated by the arrow.

Learn more about the substance formulae.

https://brainly.com/question/26694427

#SPJ4,

The half-life of a radioisotope is 8 hours if 60 g of such a radioactive substance spontaneously degrades to 15 g after 16 hours.

Uranium is the most well-known illustration of a naturally occurring radioisotope. The only other form of naturally occurring uranium , uranium, which has three less electrons in its atom and is less permanent or radioactive, makes up the remaining 0.7%.

Utilized in investigations on the survival of red blood cells. used to sterilize medical equipment and to increase the dependability and safety of commercial fuel oil burners. used in radiography, food radiation, gauges, and treatment for cancer.

To know more about Radioisotope visit:

https://brainly.com/question/13076859

#SPJ4

An acid is more acidic than its conjugate base if its pKa value is less than or equal to seven prepared a buffer solution .

A weak acid and its conjugate base are present in high amounts in buffer solutions (or a weak base and its conjugate acid). Buffers are extremely resistant to fluctuations in pH because these ingredients may neutralize extra H+ or OH.

In buffers, basic species are present to neutralize H + ions and acidic species to do the opposite. These two species must, nevertheless, be able to coexist in a solution without fully negating one another.

To know more about buffer solutions visit :

https://brainly.com/question/24262133

#SPJ4

Fischer esterification is a reaction that converts carboxylic acid in presence of alcohol and strong acid catalyst to give ester as final product. Thus, NaHCO³ is one of the strong acid catalyst used in this reaction.

What is role of NaHCO³ in Fischer reaction?

Fischer reaction is a reaction between carboxylic acid and alcohol. When this reaction occurs, the product may contain some unreacted amount of carboxylic acid or acidic catalyst. Hence it is necessary to remove this and thus, this is accomplished by NaHCO³.

The reaction given below shows that how NaHCO3  dissociates and the bicarbonate anion reacts with unreacted proton to give unstable carbonic acid which dissociate to give water and carbon dioxide.

NaHCO3 = Na + + HCO3-

H+ + HCO3 - = H2O + CO2

Sodium bicarbonate also reacts with unreacted carboxylic acid whose reaction is shown below:

RCOOH +NaHCO3 = RCOO- Na+ + CO2+ H2O

RCOONa easily gets dissolve to polar solvent water and get separated.

To know more about Fischer esterification, click on https://brainly.com/question/15901894

#SPJ4

Sorting indicates the degree to which all clastic sediments in a deposit are the same swize or mass is described by the of the sediment

Sorting involves putting information in a meaningful order so you may evaluate it more efficiently. Water will sink objects that are heavier than it. like an iron nail, etc. Sorting is the process of putting things with comparable characteristics in groups. According to how similar or different their qualities are, the materials can be categorized.

Seawater or lake water is used in mineral deposits. … It is recognized as a chemical sediment due to the fact that the mineral components are carried in solution before precipitating to form a sediment as a result of a chemical reaction.

Learn more about sediment here:

https://brainly.com/question/14306913

#SPJ4

A substance q had a vapor pressure of 345 mmHg at 22.0 °C. the temperature at a vapor pressure of 275 mmHg. the heat of vaporization of q is 36.0 kJ/mol is 19.6 °C.

The Clausius Clapeyron equation is given as :

ln ( P2 / P1 ) = - ΔH /R ( 1 / T2 - 1 / T1)

ln ( 275 / 345 ) = - 36 / 8.314 (1 / T2 - 1 / 295)

- 0.235 = - 4.33  ( 295 - T2 / 295 T2 )

15.98 T2 = 295 - T2

14.98 T2 = 295

T2 = 19.6 °C

The temperature at vapor pressure 275 mmHg is 19.6 °C.

To learn more about vapor pressure here

https://brainly.com/question/13126432

#SPJ4

The calculated mass shows that the given mass is oxygen.

calculation:-

P=m/v by  arranging  the  equation  we  get

R =0.082atm/mol/k

Mm=pRT/P = [(1.10  x10^-6 x1000g/l) xo.082  

atm/mol/k x(80+273] /(1.00  x10^-3) = 31.84  to the nearest ten is 32.

The ideal gas density depends on the molecular weight temperature and pressure of the system. Density is an important parameter in heat and mass transfer calculations. It is also used to derive many important dimensionless numbers such as the Reynolds number and the Peclet number.

Real gases approach ideal gas behavior at relatively low densities low pressures, and high temperatures. At high temperatures, the gas molecules have enough kinetic energy to overcome the intermolecular forces, but at low temperatures, the gas has less kinetic energy, so the intermolecular forces are more pronounced.

Learn more about An ideal gas here:- https://brainly.com/question/20348074

#SPJ4

A 25.0 ml sample of 0.105 m HCl was titrated with 31.5 ml of NaOH. the concentration of the NaOH is 0.0833 M.

given that :

molarity of HCl, M1 = 0.105 M

volume of HCl V1 = 25 mL

Molarity of NaOH M2 = ?

volume of NaOHV2  = 31.5 mL

by using the titration equation we get :

molarity of HCl × volume of HCl = molarity of NaOH × volume of NaOH

M1 V1 = M2 V2

M2 = (M1 V1 ) / V2

M2 = ( 0.105 × 25 ) / 31.5

M2 = 0.0833 M

The concentration of NaOH = 0.0833 M.

To learn more about concentration here

https://brainly.com/question/3122870

#SPJ4

The formula unit when barium perchlorate reacts with sodium sulfate to produce sodium perchlorate and barium sulfate would be: [tex]Ba(ClO_4)_2 (aq) + Na_2SO_4 (aq) -- > 2NaClO_4 (aq) + BaSO_4 (s)[/tex]

The reaction between barium perchlorate and sodium sulfate to produce sodium perchlorate and barium sulfate is a double decomposition reaction whose chemical equation can be derived as follows:

Formula for sodium sulfate = [tex]Na_2SO_4[/tex]

Formula for barium perchlorate = [tex]Ba(ClO_4)_2[/tex]

Formula for sodium perchlorate = [tex]NaClO_4[/tex]

Formula for barium sulfate = [tex]BaSO_4[/tex]

Since barium sulfate is insoluble, the chemical equation for the reaction would be:

[tex]Ba(ClO_4)_2 (aq) + Na_2SO_4 (aq) -- > 2NaClO_4 (aq) + BaSO_4 (s)[/tex]

In other words, a double decomposition reaction can also be a precipitation reaction in which two aqueous salts exchange radicals to produce one aqueous and one insoluble salt.

More on chemical equation of reactions can be found here: https://brainly.com/question/28294176

#SPJ1

the balanced nuclear equation for the overall decay of cobalt-60 resulting in beta and gamma emission after the two-step process. is the chemical equation of 60_27Co->60_28Ni+0_-1e+0_Oy

Chemical equations are symbols and chemical formulas that depict a chemical reaction symbolically. With a plus sign separating the entities in both the reactants and the products and an arrow pointing in the direction of the products to indicate the direction of the reaction, the reactant entities are given on the left and the product entities on the right. Chemical formulas can be mixed, structural (represented by pictures), or both. The absolute values of the stoichiometric numbers are shown as coefficients next to the symbols and formulas of the various entities. Jean Beguin drew the first chemical equation in 1615.

Learn more about Chemical equations here:

https://brainly.com/question/28294176

#SPJ4

The increase in energy when tetrahedral bond angles deviate from the optimum angle of 109.5 degree is known as angle strain.

In cycloalkanes, the carbon atoms are sp3 hybridized, which would imply an ideal tetrahedral bond angle of 109.5 degree whenever possible. cycloalkanes look like shapes such as a triangle, square, tetrahedral. all the rings are in a flat or planar shape. Bayer Theory suggests that the difference between the ideal bond angle (which is 109.5° for sp3 carbon) and the angle in the planer cycloalkane causes the strain, which is called angle strain. According to the Bayer Theory, cyclopentane would be the most stable because its bond angle, 108°, is closest to the ideal angle of 109.5°. Cyclopropane would be the least stable one since it has the largest angle deviation of 49.5° (60° vs 109.5°). It was also predicted that cyclohexane would be less stable than cyclopentane because of the larger angle deviation (10.5° deviation for cyclohexane vs 1.5° for cyclopentane), and as the number of sides in the cycloalkanes increases beyond six, the stability decreases.

To learn more about Angle strain please visit:

https://brainly.com/question/19470723

#SPJ4

The mass of the reacted sulfuric acid in solution is 3.01 g.

The reaction that we have here involves the combination of an acid and a base and result of such a reaction is that we would have salt and water as the products.

From the equation of the reaction;

2 NaOH (aq) + H₂SO₄ (aq) ----> Na₂SO₄ (aq) + 2 H₂O (l)

We can see that the mole ratio of the reaction is 2:1

Number of moles of sodium hydroxide = concentration * volume in liters

If the concentration of the NaOH solution is 1.0 M

Moles of NaOH reacted = 1.0 * 61.37 mL * 1 L / 1000 mL

= 0.06137 moles

Moles of  H₂SO₄ reacted = 0.0614 / 2

= 0.0307 moles

Mass of  H₂SO₄ reacted = 0.0307 * 98.09

= 3.01 g

Learn more about neutralization reactions : brainly.com/question/27745033

#SPJ1

Br₂(g) and K(l) species are made at the anode and cathode, respectively, during the electrolysis of molten kbr .

The term "electrolysis" describes the use of an electric current to break down a chemical. An illustration of this is the deposit of sodium and chlorine at various electrodes when the current is run through molten sodium chloride. Thus, sodium and chlorine are formed as sodium chloride breaks down. The cathode, also known as the positive or oxidizing electrode, is reduced during the electrochemical reaction after receiving electrons from the external circuit. Cations (positively charged ions) give rise to cathodes, while anions give rise to anodes. The cathode is the electrode that is negatively charged in an electrical device.

Learn more about electrolysis here:

https://brainly.com/question/12054569

#SPJ4

3.69 minutes will be needed to plate the chromium metal in the solution.

The charge transfer amount may be provided by:

q = It

where I is the current, t is the time, and q is the charge transfer

Q can be calculated by:

Moles of Cr = 0.0423 mole; As, moles = 2.19/51.9

Also, there is transfer of 3 electrons, thus, charge transfer will be faraday constant multiplied by 3

Charge transfer = 0.0423 *3*  96500 C

Charge transfer = 12245.85 C

As, q = it

12245.85 = 55.2 * Time

Time = 221.845 sec = 3.69 min

To know more about electrolyte cell, click here,

brainly.com/question/861659

#SPJ4

The molarity of the diprotic acid that requires 18.73 mL KOH is 1.405 M.

The chemical reaction between a diprotic acid and KOH is

H₂A + 2 KOH → K₂A + 2 H₂O

In stoichiometry, we learn the chemical reaction and the laws that work in it. According to Avogadro's law, the coefficient of a substance in a chemical reaction expresses the ratio of the number of moles of each substance.

[tex]M \:=\: \frac{n}{V}[/tex]

n = MV

KOH

The number of moles for a diprotic acid

n KOH : n H₂A = 2 : 1
n H₂A = n KOH ÷ 2
n H₂A = 5.619 ÷ 2
n H₂A = 2.8095 mmol

The molarity of a diprotic acid

[tex]M \:=\: \frac{n}{V}[/tex]
[tex]M \:=\: \frac{2.8095}{25.00}[/tex]
M = 1.405 M

Learn more about Stoichiometry here: https://brainly.com/question/26873446

#SPJ4

0.0014 atm is the pressure of nitrogen at 20 °C and 730 mm Hg initial pressure when its volume increases from 875 ml to 955 ml

Since the mass of the gas is maintained during the change in volume, the number of moles with the initial volume must first be calculated.

To calculate the moles of gas, the ideal gas equation is used:

PV = nrt

where

P = Pressure

V=Volume

n = moles

T = temperature

R = gas constant

It is cleared n:

n = PV/Rt

n = PV/Rt

Data

P = 730 mmHg = 0.96 atm

V = 875ml = 0.875L

n = ?

T = 20°C = 293.15K

R = 0.082 L atm/mol °K

n = PV/Rt

n = 0.96. 0.875 / 0.082. 293.15

n = 0.84 / 24.03

n = 0.035 moles

Knowing the moles of nitrogen, the new pressure of the gas is calculated after changing its volume.

Data

P = ?

V = 955ml = 0.955L

n = 0.035 moles

T = 20°C = 293.15K

R = 0.082 L atm/mol °K

P = nRt/V

P = 0.035. 0.955 / 0.082. 293.15

P = 0.033 / 24.03

P = 0.0014 atm

Learn more about the pressure of a gas at https://brainly.com/question/29341536

#SPJ4

Answer:

Vaporisation and Sublimation

Explanation:

Vaporisation is conversion of liquid to gas. Atoms in the liquid overcome forces of attraction to turn into gas.

Sublimation is direct conversion of solid to gas. Atoms in the solid directly convert into gas by overcoming forces of attraction.  E.g - Dry Ice

Answer:

1.93 molar, or M

Explanation:

By definition, molarity is defined as moles/liter.  A 0.5 molar (or M) solution will have 0.5 moles of solute per 1.0 liter.  To answer this question, first calculate how many moles of NaOH there are in 11.6 grams of the compound.  We'll need the miolar mass of NaOH, which is 40 grams/mole.  This is found by adding the atomic masses of each atom in the compound:

Na:     23

O:      16

H:         1

Total: 40 g/mole

The moles of NaOH is found by dividing the mass by the molar mass:

        (11.6 grams NaOH)/(40 g/mole NaOH) = 0.29 moles NaOH

0.29 moles NaOH is contained in 15cm^3 of solution.  Convert 15cm^3 into liters (L):

 (15 cm^3)*(1 ml/cm^3)*(1 liter/1000 ml) = 0.015 liters

cm^3 and ml both cancel with these conversion factors, leaving only liters, L.

The solution consists of 0.29 moles of NaOH in 0.15L.  It's concentration is therefore:

  (0.29 moles)/(0.015L) = 1.93 molar, or M

The correct statement about an exothermic reaction carried out in a coffee-cup calorimeter is that the enthalpy of the products is lower than that of the reactants. Therefore, the correct answer is option B.

Exothermic reaction is a term that means the heat will be released during the reaction, making the environment warmer. In a coffee-cup calorimeter, the heat increases the temperature of coffee contents, which includes water.

In an exothermic reaction, the enthalpy of the product will be lower than that of reactants (B is correct).

During the reaction, heat is released so the water temperature will increase (C and E are incorrect).

Since the enthalpy of the product is lower, the enthalpy change will be negative (D is incorrect).

Learn more about exothermic reaction at https://brainly.com/question/2924714

#SPJ4

The true statement is b- Lewis bases are electron pair donors. Lewis bases are referred to as species that have extra electrons and have the tendency to give electrons to Lewis acids that have empty orbitals.

What is Lewis base?

Any substance that has the ability to give a pair of nonbonding electrons, such as the OH- ion, is considered a Lewis base. Therefore, a Lewis base is an electron-pair donor.

The correct answer is option B.

Lewis bases provide extra electrons to species with empty orbitals since they have filled orbitals compared to their own. Lewis bases are therefore electron donors, providing option (B) the proper choice.

To learn more about Lewis base from the given link.

https://brainly.com/question/17111419

#SPJ4

The mass of barium sulfide that participates is 118.57grams.

Barium sulfate is available as a powder to be dissolved in water, a liquid suspension, a paste, and a tablet. The paste and tablet are taken orally, while the powder and water mixture, suspension, and enema (liquid instilled into the rectum) are all administered.

Avogadro's law states that 1 mole of each substance contains 6.023×10²³ Avogadro's number of particles and takes up 22.4 L at STP.

The following equation is used to determine the moles:

Number of moles = given mass/molar mass

Moles of  BaSO₄ = 0.700moles

Molar mass of BaSO₄= 169.39 g/mol

Mass = 0.7×169.39

Mass = 118.57grams.

To know more about mass visit:

https://brainly.com/question/20411713

#SPJ1

A structure containing a central atom with two electron groups, designated ax2, has a Linear shape with a bond angle of  180 degrees.

The geometry surrounding a central atom that is joined to two additional atoms (or ligands) at a bond angle of 180° is known as the linear molecular geometry in chemistry. When describing linear organic compounds with carbon centers, such as acetylene (HCCH), sp orbital hybridization is frequently used.

Linear geometry occurs at central atoms with two linked atoms and zero to three lone pairs (AX2 or AX2E3) in the AXE nomenclature, according to the Valence Shell Electron Pair Repulsion (VSEPR) hypothesis. Beryllium fluoride (FBeF) has two single bonds, carbon dioxide (O=C=O) has two double bonds, and hydrogen cyanide (HCN) has one single bond and one triple bond, all of which are neutral AX2 molecules.

To know more about linear geometry, click here,

brainly.com/question/29309677

#SPJ4

Answer:

A. Gmir ZuXAXB + RT (XA lnXA + XB ln Xp) Where W = WAB (WAA + WBB) and Z = the coordination number of each atom in the crystal.

Explanation:

Free enthalpy is another name for Gibbs's free energy. The energy associated with a chemical reaction needed to carry out work is known as Gibbs-free energy.

The formula: can be used to compute Gibbs free energy.

ΔG=ΔH-TΔS.

The difference between the reaction's enthalpy and its product of changing temperature and entropy yields the Gibbs free energy.

To learn more about Gibbs free energy.

https://brainly.com/question/9179942

#SPJ4

Transesterification is a three-step process where a triglyceride is converted into diglycerides, followed by monoglycerides, in a sequential order.

To learn more about Fatty acid synthesis, refer to the link:

brainly.com/question/26353151

#SPJ4

Marie Anne Lavoisier realized how crucial it was to create drawings of the tools she and her husband employed in their research. In order to impart knowledge, this is crucial.

It is widely acknowledged that Lavoisier's major contributions to chemistry came mostly from his transformation of the field from a qualitative to a quantitative one. The discovery of the function of oxygen in combustion is what made Lavoisier famous. He challenged the phlogiston idea and identified and called the elements oxygen and hydrogen (1778). Lavoisier contributed to the development of the metric system, created the first comprehensive list of elements, and reformed chemical nomenclature. In addition to discovering that matter's mass never changes despite its form or shape, he also anticipated the creation of silicon in 1787. Lavoisier served as the general manager of the Ferme and was a key member of several aristocratic councils

Learn more about Lavoisier here:

https://brainly.com/question/11833531

#SPJ4